A 71-year-old male presented with esophageal cancer and severe aortic valve regurgitation. Treatment strategies for such patients are controversial. Considering the risks of cardiopulmonary bypass and potential esophageal cancer metastasis, we successfully performed transcatheter aortic valve implantation and minimally invasive three-incision thoracolaparoscopy combined with radical resection of esophageal cancer (McKeown) simultaneously in the elderly patient who did not require neoadjuvant treatment. This dual minimally invasive procedure took 6 hours and the patient recovered smoothly without any surgical complications.

ObjectiveTo explore the mechanism by which the ethanol extract of Epimedium brevicornu （EEBM） intervenes in mesenchymal adipose-derived stem cells （ADSCs） to delay aging in castrated rats. MethodsForty-five 3-month-old SPF female SD rats were ovariectomized and randomly divided into model group， ADSCs treatment group， and ADSCs groups treated with low， medium， and high concentrations of EEBM （1， 50， 100 μg·L^-1）， referred to as the AE low， medium， and high concentration groups， with 9 rats in each group. After tail vein injection of 200 μL of the corresponding stem cell suspension， aging-related indicators including cyclin-dependent kinase inhibitor （p21）， tumor suppressor gene （p53）， interleukin-6 （IL-6）， interleukin-8 （IL-8）， superoxide dismutase （SOD）， malondialdehyde （MDA）， B-cell lymphoma-2 （Bcl-2）， Bcl-2-associated X protein （Bax）， cysteine-aspartic acid protease-3 （Caspase-3）， and lipofuscin were measured using enzyme-linked immunosorbent assay （ELISA） and Western blot. ResultsCompared with the model group， the IL-6 content in the AE low， medium， and high concentration groups was significantly decreased （P<0.05）. Lipofuscin， MDA， and IL-8 levels in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.01）， while SOD content was significantly increased （P<0.05， P<0.01）. Compared with the ADSCs treatment group， lipofuscin and IL-8 levels in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）. The MDA content was significantly decreased in the AE medium concentration group （P<0.01）. Compared with the model group， protein levels of p21， p53， Bax， and Caspase-3 in the ADSCs treatment group and AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， while the Bcl-2 protein level was significantly increased （P<0.01）. Compared with the ADSCs treatment group， protein levels of p21， p53， Bax， and Caspase-3 in the AE low， medium， and high concentration groups were significantly reduced （P<0.05， P<0.01）， and the Bcl-2 protein level in the AE low concentration group was significantly increased （P<0.01）. ConclusionThe results of this experiment show that EEBM-treated ADSCs or ADSCs may delay aging in castrated rats by inhibiting cell apoptosis， reducing cell cycle inhibitors and pro-inflammatory factors， enhancing antioxidant capacity， and reducing oxidative reactions. Moreover， EEBM-treated ADSCs demonstrate stronger anti-aging effects than ADSCs alone. This study provides experimental evidence supporting the clinical use of EEBM to intervene in ADSCs and delay aging.

Atopic dermatitis （AD） is a common pruritic and chronic inflammatory dermatosis in clinical practice and is one of the diseases responding specifically to traditional Chinese medicine （TCM）. With the launch of biological agents and small molecule drugs and the development and implementation of guidelines of diagnosis and treatment， clinical pathways of treatment of moderate to severe AD， and consensus on the whole-process management of AD， the clinical efficacy of moderate to severe AD has been significantly improved. However， there are still many unmet clinical needs that require more effective methods to meet. In response to the Opinions of the CPC Central Committee and the State Council on Facilitating the Inheritance， Innovation， and Development of Traditional Chinese Medicine and the spirit of the National Conference on TCM， the China Association of Chinese Medicine organized more than 20 experts in TCM dermatology， Western medicine dermatology， interdisciplinary fields， and industries to discuss the difficulties and advantages of TCM in the treatment of AD. TCM treatment for AD can not only improve rash and relieve itching but also solve many concomitant syndromes. The abundant external treatment methods of TCM have advantages for different special populations and rash characteristics. The concept of treating disease before its onset in TCM is in line with the chronic disease management mode of prevention and treatment of atopic march and prevention of recurrence. In addition， TCM therapy can reduce the use of topical glucocorticoids and has good safety. Regarding the comorbidity of AD， equal emphasis on TCM and Western medicine and multidisciplinary joint treatment should be advocated to achieve maximum benefit for patients. The exchange of TCM and Western medicine has clarified the positioning and advantages of TCM intervention in AD， providing guidance for clinical and scientific research.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

Two methods including gas chromatography tandem mass spectrometry (GC-MS/MS) and high-performance liquid chromatography tandem mass spectrometry (LC-MS/MS) were established to detect common alkyl sulfonates and aryl sulfonates genotoxic impurities. Four alkyl sulfonates and methyl benzenesulfonate were determined by GC-MS/MS using butyl methanesulfonate as the internal standard, the chromatographic column was HP-5MS UI (30 mm × 0.25 mm, 0.25 µm), the carrier gas was helium, the flow rate was 1.0 mL·min^-1 in a constant flow mode, the sample inlet temperature was set to 250 ℃, the split ratio was 10∶1, and the initial temperature of the heating program was 80 ℃, maintained for 1 minute, and then increased to 240 ℃ at a heating rate of 30 ℃·min^-1 for 2 minutes. The mass spectrometry detector was an electron bombardment ion source (EI source), the data collection condition was multi reaction monitoring mode (MRM), and method validation using the raw material of clinical drug citalopram hydrobromide as a sample. The results showed that the linear range of four alkyl sulfonates and methyl benzenesulfonate were good at 3-50 ng·mL^-1 and 9-150 ng·mL^-1, with a correlation coefficient of r > 0.999, The spiked recovery was 80%-120%. The detection limits were 1 and 3 ng·mL^-1; Ten aryl sulfonates determined by LC-MS/MS, the chromatographic column was CSH Fluoro phenyl (100 mm × 2.1 mm, 1.7 µm), the mobile phase was methanol (B)-5 mmol·L^-1 ammonium formate (D), with a flow rate of 0.2 mL·min^-1, and gradient elution was performed. The gradient program (T/% B) was set as 0/20, 25/90, 35/90, 42/20. The mass spectrometer detector was electro spray ionization with positive ionization mode (ESI⁺), the data collection was in dynamic multi reaction monitoring mode (dMRM), and the method was validated using the raw material of the clinical drug citalopram hydrobromide as a sample. The results showed that the linear range of aryl sulfonates were good at 9-2 000 ng·mL^-1, 3-100 ng·mL^-1 and 0.9-30 ng·mL^-1, respectively. The correlation coefficient r > 0.999, the spiked recovery was 80%-120%. The detection limits were 30, 1 and 0.3 ng·mL^-1. Two detection methods did not detect potential sulfonate genotoxicity impurities in the above APIs. The established analytical methods are reliable and effective, which can provide reference for drug quality control and detection.

Objective To investigate the role and underlying mechanism of atorvastatin on hyper-glycemia induced hemorrhagic transformation(HT)in a mouse model of cerebral ischemia.Meth-ods A total of 36 SPF-grade male C57BL/6 mice were randomly divided into sham operation group,HT model group and atorvastatin group,with 12 mice in each group.HE staining was used to observe cerebral hemorrhage,immunofluorescent staining was employed to detect the integrity of blood-brain barrier,and Western blotting was applied to measure the protein expression of IgG,ZO-1,occludin,claduin5,MMP-2 and-9 in ischemic penumbra brain tissues.Results Com-pared with sham operation group,the neurological deficit score,mortality rate,HT incidence,HT grading score,IgG fluorescence intensity,and protein levels of IgG,MMP-2 and-9 were signifi-cantly increased,while the protein levels of ZO-1,occludin and claudin5 were obviously decreased in the HT model group(P＜0.01).Atorvastatin treatment resulted in significantly lower neuro-logical deficit score(2.73±1.19 vs 3.91±0.94),mortality rate(16.7％vs 41.6％),HT incidence(58.3％vs 91.6％),HT grading score(1.00±1.04 vs 2.58±1.13),IgG fluorescence intensity(504.30±105.52 a.u vs 859.91±153.28 a.u),and protein levels of IgG(4.55±1.40 vs 12.06± 3.73),MMP-2(1.87±0.41 vs 2.95±0.68)and-9(1.47±0.24 vs 2.12±0.23)(P＜0.05,P＜0.01),and increased protein levels of ZO-1(1.55±0.20 vs 0.53±0.10),occludin(0.92±0.11 vs 0.35±0.07)and claudin5(0.58±0.04 vs 0.30±0.05)(P＜0.01)when compared with the HT model group.Conclusion Atorvastatin can reduce the permeability of blood-brain barrier by in-hibiting the activation of MMP-2 and MMP-9 and up-regulating the protein levels of ZO-1,occlu-din and claudin5,and thus attenuate hyperglycemia-induced HT.

The traditional commodity specifications of Chinese medicinal materials are mainly divided into different grades based on macroscopic characteristics. As the basis for high quality and good price, there is still a lack of systematic evaluation on whether they are consistent with the current standards and whether they can reflect the internal quality of medicinal material. Panax notoginseng is a commonly used, large consumption of Chinese medicinal material. At present, it is divided into 8 grades in the market based on "Tou" (the number of crude drug /500 g), but it is not related to the standard of total saponins of Panax notoginseng (the sum of three saponins) in Chinese Pharmacopoeia. In this study, ultra-performance liquid chromatography-quadrupole-time of flight mass spectrometry (UPLC-Q-TOF-MS/MS) coupled with mass spectrometry molecular network were used for the rapid identification of saponins of Panax notoginseng with different "Tou" and a total of 64 saponins were identified. Seventeen saponins related to "Tou" were screened by orthogonal partial least squares discriminant analysis (OPLS-DA). The content of five saponins R₁, Rb₁, Rg₁, Rd, and Re in Panax notoginseng with different "Tou" was determined by high performance liquid chromatography (HPLC). The results of correlation analysis showed that Rd and R₁ with the largest VIP values among the differential saponins, which significantly negatively correlated with "Tou" (P < 0.05). Based on the determination results of 36 batches of samples, using Rd/Total Panax notoginseng saponins (TPNS) ratio ( > 0.08) as the index, Panax notoginseng can be divided into two grades: 20-60 "Tou" (superior) and 80-200 "Tou" (qualified). Based on the concept of "macroscopic characteristics and chemical profiling", this study integrates the non-targeted analysis and quantitative determination methods to provide a new strategy for quality evaluation of Panax notoginseng.