Objective To investigate the current status and serologic characteristics of occult HBV infection in the adult physical examination population in Zigong region. Methods A total of 126 381 patients who were examined in the physical examination center and gastroenterology department of The First People's Hospital of Zigong City from April 2023 to September 2024 were screened, and 21 615 eligible cases were included in the study. The current status of infection was analyzed and serological patterns and serological characteristics of the included individuals were compared. Results This study screened 126 381 patients, all of whom underwent serum HBsAg testing, and 21 615 patients (17.10%) underwent HBV DNA testing, of which 7 992 were HBV DNA positive (>102 IU/mL) and HBsAg negative, accounting for 36.97% of the total number of patients who underwent HBV DNA testing. Anti-HBc positivity was significantly higher than other serologic patterns, and the lowest rate of HBV DNA positivity was found in those who were positive for anti-HBc, anti-HBs and anti-HBe. The lowest male-to-female ratio (1.25:1) was found in patients with both anti-HBc, anti-HBs and anti-HBe positivity, which was significantly lower than that of patients with the other three serologic characteristics (P=0.005). There were no significant differences in age, BMI, AST, ALT, and TBiL levels among patients with different serum characteristics (all P>0.05). The HBV viral load is highest in patients with anti HBc combined with anti HBe positivity, while the HBV viral load is lowest in patients with anti HBc positivity, anti HBs positivity, and all anti HBe positivity (P<0.001). Viral genotypes were predominantly B-type, and there were differences in genotype distribution among the four groups of patients (P<0.001). Conclusion The level of occult HBV infection was high in the adult medical examination population in Zigong region, mostly characterized by anti-HBc positivity, with the lowest male-to-female ratio among patients who were positive for anti-HBc, anti-HBs, and anti-HBe, and the highest HBV viral load among patients who were positive for anti-HBc combined with anti-HBe.

Objective To investigate the current status and serologic characteristics of occult HBV infection in the adult physical examination population in Zigong region. Methods A total of 126 381 patients who were examined in the physical examination center and gastroenterology department of The First People's Hospital of Zigong City from April 2023 to September 2024 were screened, and 21 615 eligible cases were included in the study. The current status of infection was analyzed and serological patterns and serological characteristics of the included individuals were compared. Results This study screened 126 381 patients, all of whom underwent serum HBsAg testing, and 21 615 patients (17.10%) underwent HBV DNA testing, of which 7 992 were HBV DNA positive (>102 IU/mL) and HBsAg negative, accounting for 36.97% of the total number of patients who underwent HBV DNA testing. Anti-HBc positivity was significantly higher than other serologic patterns, and the lowest rate of HBV DNA positivity was found in those who were positive for anti-HBc, anti-HBs and anti-HBe. The lowest male-to-female ratio (1.25:1) was found in patients with both anti-HBc, anti-HBs and anti-HBe positivity, which was significantly lower than that of patients with the other three serologic characteristics (P=0.005). There were no significant differences in age, BMI, AST, ALT, and TBiL levels among patients with different serum characteristics (all P>0.05). The HBV viral load is highest in patients with anti HBc combined with anti HBe positivity, while the HBV viral load is lowest in patients with anti HBc positivity, anti HBs positivity, and all anti HBe positivity (P<0.001). Viral genotypes were predominantly B-type, and there were differences in genotype distribution among the four groups of patients (P<0.001). Conclusion The level of occult HBV infection was high in the adult medical examination population in Zigong region, mostly characterized by anti-HBc positivity, with the lowest male-to-female ratio among patients who were positive for anti-HBc, anti-HBs, and anti-HBe, and the highest HBV viral load among patients who were positive for anti-HBc combined with anti-HBe.

ObjectiveBased on analytic hierarchy process（AHP）-criteria importance through intercriteria correlation（CRITIC） hybrid weighting method， grey relational analysis and backpropagation artificial neural network（BP-ANN）， to optimize the water extraction process of Qizhi prescription， so as to provide an experimental basis for optimization of the preparation process of this prescription and the establishment of quality standards. MethodsL₉（3⁴） orthogonal test was employed， and the AHP-CRITIC hybrid weighting method was utilized to determine the weight coefficients of the quality fractions of various components， including astragaloside Ⅳ， polygalaxanthone Ⅲ， calycosin-7-O-β-D-glucoside， tenuifolin， and 3，6′-disinapoylsucrose， as well as the dry extract yield. The comprehensive score of each factor level combination in the orthogonal test were calculated as evaluation indicator to select the optimal extraction process parameters. The effects of extraction times， extraction time， and solvent dosage on the aqueous extraction process of the formula were investigated through intuitive analysis， variance analysis， and grey relational analysis. Meanwhile， a BP-ANN model was established to reverse-predict the optimal extraction process parameters of Qizhi prescription， and the optimized process parameters were validated. ResultsThe weight coefficients of the five index components（astragaloside Ⅳ， tenuifolin， calycosin-7-O-β-D-glucoside， polygalaxanthone Ⅲ， and 3，6′-disinapoylsucrose） and dry extract yield were 25.7%， 20.82%， 16.41%， 12.45%， 15.96% and 8.67%， respectively. The optimized extraction process parameters were extracted 3 times with 8， 6， 6 times the amount of water， each time for 1 h. The network prediction results of BP-ANN test samples were consistent with the orthogonal test results， and the mean square error（MSE） of the predicted and measured values of the network was <1%. The water extraction process of Qizhi prescription analyzed and predicted by relevant mathematical models was stable and feasible， which could effectively improve the extraction efficiency of the active ingredients of Astragali Radix and Polygalae Radix， and the average comprehensive score of the validation test was 90.85 with the relative standard deviation（RSD） of 1.55%. ConclusionThis study establishes a water extraction process for compound Qizhi granules， and the optimized extraction process can effectively improve the extraction efficiency of active ingredients， which provides useful references for the optimization of preparation process and the establishment of quality standards for other clinical experience formulas.

Direct compression is an ideal method for tablet preparation, but it requires the powder's high functional properties. The functional properties of the powder during compression directly affect the quality of the tablet. 15 parameters such as Py, FES-8KN, FES-12KN, FES-16KN, CR-8KN, CR-12KN, and CR-16KN were used as the characteristic variables in this paper. Unsupervised learning methods like principal component analysis, cluster analysis, and factor analysis were applied to analyze and classify the compression behavior data of 36 traditional Chinese medicine powders. The results showed that both different dimensionality reduction classification methods could effectively differentiate the compression behavior characteristics of 36 traditional Chinese medicine compound powders. The hierarchical cluster analysis results showed a better agreement with the actual compression phenomena of the powders, where group 1 was high elasticity and low compressibility, group 2 was easily compressed and hard to break, group 3 was excellent compressibility and compactibility. This study is expected to provide references and ideas for predicting the behavior of traditional Chinese medicine powders and the screening of tablet formulations.

AIM: To assess the repeatability and agreement of higher-order aberration obtained by adaptive optics visual simulator(VAO)compared with OPD-Scan Ⅲ.METHODS: A cross-sectional study was conducted from August to September 2023, including a total of 204 patients(204 eyes)with myopia whose right eyes were measured. The examinations were performed by the same skilled examiner using both devices separately. The VAO device was used to measure higher order aberrations of orders 3 to 6 at a pupil diameter of 4.5 mm, while both the VAO and OPD-Scan Ⅲ devices were utilized to measure total higher-order aberration(tHOA), spherical aberration(SA), coma aberration(Coma), and trefoil aberration(Trefoil)of the entire eye at pupil diameters ranging from 3 to 6 mm. Furthermore, the repeatability of whole eye aberration measurements obtained with the VAO device was evaluated and the agreement of the two devices was assessed.RESULTS: The whole-eye higher-order aberrations measured by VAO demonstrated excellent repeatability(0.767≤ICC≤0.941, Sw<0.01 μm, TRT<0.1 μm). There was no statistically significant difference in Coma measured by VAO or OPD-Scan Ⅲ for pupil diameters ranging from 4 to 6 mm(P>0.05), while a statistically significant difference was observed in whole-eye tHOA of other pupil diameters(all P<0.05). The agreement of aberration measurements for each order between VAO and OPD-Scan Ⅲ for 3 mm pupil diameters, SA at 4 and 5 mm pupil diameter and Coma at 4 mm pupil diameter showed a 95% limit of agreement(LoA)<0.1, indicating good agreement; however, poor agreement was found for the remaining aberration measurements at different pupil diameters, with a 95%LoA>0.1, and there were significant differences in higher-order aberrations measured by two devices under a pupil diameter of 3 mm(r=0.218-0.317, P<0.01), 4 mm(r=0.406-0.672, P<0.01), 5 mm(r=0.538-0.839, P<0.01 and r=0.030-0.109, P>0.01)and 6 mm(r=0.369-0.766, P<0.01).CONCLUSION: The VAO demonstrates favorable repeatability when assessing whole-eye higher order aberration under pupil diameters of 3-6 mm. However, there is inadequate agreement and interchangeability in whole-eye higher order aberration at 3-6 mm pupil diameter between VAO and OPD-Scan Ⅲ for clinical purposes.

Objective: To investigate the effects of electrochemically dealloying of Ti6Al4V abutments on human gingival fibroblasts (HGFs) and to provide experimental evidence for surface modification of implant abutments. Methods: The samples were divided into an NC group (negative control, no other treatment on a smooth surface), an NM-1 group (nanomesh-1, electrochemical dealloying treatment in 1 mol/L NaOH 1 h on 2 V voltage), and an NM-2 group (nanomesh-2, electrochemical dealloying treatment in 5 mol/L NaOH 1 h on 2 V voltage). The surface morphologies of the samples and the adhesion of HGFs on the sample surfaces were observed with scanning electron microscopy (SEM). The surface hydrophilicities of the samples were measured with a contact angle measuring instrument. The proliferation of HGFs on the different samples were evaluated with CCK-8, and the expression of adhesion-related genes, including collagen Ⅰ (COL1A1), collagen Ⅲ (COL3A1), fibronectin 1 (FN1), focal adhesion kinase (FAK), vinculin (VCL), integrin α2 (ITGA2), and integrin β1 (ITGB1), on the different samples was measured with qRT-PCR. The expression of vinculin on the surfaces of HGFs was observed via confocal laser scanning microscopy (CLSM) after immunofluorescent staining. Collagen fiber secretion and syntheses of HGFs from different samples were evaluated via Sirius red staining. Results: SEM revealed the formation of ordered and uniform three-dimensional mesh structures on the surfaces of the NM-1 and NM-2 groups, with grid diameters of approximately 30 nm for the NM-1 group and approximately 150 nm for the NM-2 group. Compared with that of the NC group, the water contact angles of the NM-1 group and NM-2 groups were significantly lower (P<0.000 1). Cell proliferation in the NM-1 group was significantly greater than that in the NC group (P<0.01). Moreover, there was no significant difference in the water contact angles or cell proliferation between the NM-1 group and the NM-2 group. SEM revealed that HGFs were adhered well to the surfaces of all samples, while the HGFs in the NM-1 and NM-2 groups showed more extended areas, longer morphologies, and more developed pseudopodia than did those in the NC group after 24 h. qRT-PCR revealed that the expression levels of the adhesion-related genes COL1A1, COL3A1, FN1, FAK and VCL in the NM-1 group were significantly greater than those in the NC and NM-2 groups (P<0.01). The expression of vinculin protein in the NM-1 group was the highest, and the number of focal adhesions was greatest in the NM-1 group (P<0.01). The results of Sirius red staining showed that the NM-1 group had the highest secretion and syntheses of collagen fibers (P<0.000 1). Conclusion The three-dimensional nanomechanical structure of Ti6Al4V modified by electrochemical dealloying promoted the adhesion, proliferation, collagen fiber secretion and syntheses of HGFs, and electrochemical dealloying of Ti6Al4V with a grid diameter of approximately 30 nm obviously promoted HGF formation.

Humans ; Amyloidosis ; Amyloid ; Cardiomyopathies

Objective:To analyze the clinical characteristics of patients undergoing extracorporeal cardiopulmonary resuscitation (ECPR), and to explore the risk factors leading to poor prognosis.Methods:The clinical data of 95 patients with ECPR admitted to the First Affiliated Hospital of Zhengzhou University from January 2020 to May 2023 were retrospectively analyzed. According to the survival status at the time of discharge, the patients were divided into the survival group and death group. The difference of clinical data between the two groups was compared to explore the risk factors related to death and poor prognosis. Risk factors associated with death were identified by Binary Logistic regression analysis. Results:A total of 95 patients with ECPR were included in this study, 62 (65.3%) died and 33 (34.7%) survived at discharge. Patients in the death group had longer low blood flow time [40 (30, 52.5) min vs. 30 (24.5, 40) min ] and total cardiac arrest time[40 (30, 52.5) min vs. 30(24.5, 40) min], shorter total hospital stay [3 (2, 7.25) d vs. 19 (13.5, 31) d] and extracorporeal membrane oxygenation (ECMO) assisted time [26.5 (17, 50) h vs. 62 (44, 80.5) h], and more IHCA patients (56.5% vs. 33.3%) and less had spontaneous rhythm recovery before ECMO (37.1% vs. 84.8%). Initial lactate value [(14.008 ± 5.188) mmol/L vs.(11.23 ± 4.718) mmol/L], APACHEⅡ score [(30.10 ± 7.45) vs. (25.88 ± 7.68)] and SOFA score [12 (10.75, 16) vs. 10 (9.5, 13)] were higher ( P< 0.05). Conclusions:No spontaneous rhythm recovery before ECMO, high initial lactic acid and high SOFA score are independent risk factors for poor prognosis in ECPR patients.

The community teaching bases play an important role in training of general practice talents. To raise the training quality, the development of their own capacity is crucial, but community medical institutions also need close cooperation with the departments of general practice in medical schools and the higher-level general hospitals. This article discusses the integration model of management, teaching and research in general practice talent training based on the cooperation of community teaching bases with relevant governmental departments, professional societies/associations, general hospitals and medical schools.

Objective To investigate the effects of electrochemically dealloying of Ti6Al4V abutments on human gingival fibroblasts(HGFs)and to provide experimental evidence for surface modification of implant abutments.Methods The samples were divided into an NC group(negative control,no other treatment on a smooth surface),an NM-1 group(nanomesh-1,electrochemical dealloying treatment in 1 mol/L NaOH 1 h on 2 V voltage),and an NM-2 group(nanomesh-2,electrochemical dealloying treatment in 5 mol/L NaOH 1 h on 2 V voltage).The surface morpholo-gies of the samples and the adhesion of HGFs on the sample surfaces were observed with scanning electron microscopy(SEM).The surface hydrophilicities of the samples were measured with a contact angle measuring instrument.The prolif-eration of HGFs on the different samples were evaluated with CCK-8,and the expression of adhesion-related genes,in-cluding collagen Ⅰ(COL1A1),collagen Ⅲ(COL3A1),fibronectin 1(FN1),focal adhesion kinase(FAK),vinculin(VCL),integrin α2(ITGA2),and integrin β1(ITGB1),on the different samples was measured with qRT-PCR.The ex-pression of vinculin on the surfaces of HGFs was observed via confocal laser scanning microscopy(CLSM)after immuno-fluorescent staining.Collagen fiber secretion and syntheses of HGFs from different samples were evaluated via Sirius red staining.Results SEM revealed the formation of ordered and uniform three-dimensional mesh structures on the surfaces of the NM-1 and NM-2 groups,with grid diameters of approximately 30 nm for the NM-1 group and approxi-mately 150 nm for the NM-2 group.Compared with that of the NC group,the water contact angles of the NM-1 group and NM-2 groups were significantly lower(P＜0.000 1).Cell proliferation in the NM-1 group was significantly greater than that in the NC group(P＜0.01).Moreover,there was no significant difference in the water contact angles or cell prolifer-ation between the NM-1 group and the NM-2 group.SEM revealed that HGFs were adhered well to the surfaces of all samples,while the HGFs in the NM-1 and NM-2 groups showed more extended areas,longer morphologies,and more de-veloped pseudopodia than did those in the NC group after 24 h.qRT-PCR revealed that the expression levels of the ad-hesion-related genes COL1A1,COL3A1,FN1,FAK and VCL in the NM-1 group were significantly greater than those in the NC and NM-2 groups(P＜0.01).The expression of vinculin protein in the NM-1 group was the highest,and the num-ber of focal adhesions was greatest in the NM-1 group(P＜0.01).The results of Sirius red staining showed that the NM-1 group had the highest secretion and syntheses of collagen fibers(P＜0.000 1).Conclusion The three-dimensional nanomechanical structure of Ti6Al4V modified by electrochemical dealloying promoted the adhesion,proliferation,colla-gen fiber secretion and syntheses of HGFs,and electrochemical dealloying of Ti6Al4V with a grid diameter of approxi-mately 30 nm obviously promoted HGF formation.