Glomerular filtration rate(GFR)is a critical indicator of renal function assessment,which exhibits age-dependency in children and may differ from adults under various disease conditions.In recent years,there has been a growing focus on GFR among scholars,with an increasing number of clinical studies dedicated to refining and optimizing GFR estimation to span all pediatric age groups.However,the methods and assessment equations for estimating GFR may vary under different disease conditions,affecting the accuracy and applicability of assessments.This article reviews the peculiarities of renal function in children,explores GFR measurement methods,and evaluates the application of various GFR assessment equations in pediatric clinical practice,providing a reference for clinical assessment of renal function in children.

Objective To investigate the prevalence of tension-type headache(TTH)in children and adolescents aged 0-19 years globally in 1990-2021,and to provide a basis for the prevention and treatment of TTH.Methods Based on the Global Burden of Disease Study data,the age-standardized prevalence distribution of TTH and its changing trend were analyzed among the children and adolescents aged 0-19 years,with different sexes,age groups,sociodemographic index(SDI)regions and countries/territories.Results The age-standardized prevalence rate(ASPR)of TTH in children and adolescents aged 0-19 globally in 2021 was 17 339.89/100 000,which was increased by 1.73%since 1990.The ASPR in females was slightly higher than that in males(1990:17 707.65/100 000 vs 16 403.78/100 000;2021:17 946.29/100 000 vs 16 763.09/100 000).The ASPR in adolescence was significantly higher than that in school-aged and preschool periods(1990:27 672.04/100 000 vs 10 134.16/100 000;2021:28 239.04/100 000 vs 10 059.39/100 000).Regions with high SDI exhibited a higher ASPR than the other regions,with significant differences in prevalence rates across different countries.From 1990 to 2021,there was a slight increase in global ASPR,with an average annual percentage change(AAPC)of 0.06%.Females experienced a smaller increase than males based on AAPC(0.04%vs 0.07%).There was reduction in ASPR in preschool and school-aged groups,with an AAPC of-0.02%,while there was a significant increase in ASPR in adolescence,with an AAPC of 0.07%.ASPR decreased in regions with low-middle and low levels of SDI,with an AAPC of-0.02%and-0.04%,respectively,while it increased in regions with middle SDI,with an AAPC of 0.24%.Conclusions There is a consistent increase in the ASPR of TTH in children and adolescents aged 0-19 years globally,with significant differences across sexes,age groups,SDI regions and countries/territories.

Aim To explore the effect of Danggui Shaoyao San on edema in rats with nephrotic syndrome and the underlying mechanism.Methods Rats were randomly divided into control group,model group,Danggui Shaoyao San group(17.2 g·kg-1·d-1),losartan group(30 mg·kg-1·d-1)and tolvaptan group(3 mg·kg-1·d-1).The rat model of nephrot-ic syndrome was established by tail vein injection of adriamycin.After four weeks of treatment,the levels of renal function and 24 h urinary protein were detected.The distribution of aquaporin 2(AQP2)and pS256-AQP2 in renal tissue was detected by immunohisto-chemistry.The levels of plasma arginine vasopressin(AVP)and angiotensin Ⅱ(Ang Ⅱ)were measured by radioimmunoassay.The expressions of renal AQP2,pS256-AQP2,angiotensin type 1 receptor(AT1R),arginine vasopressin receptor 2(V2R)protein and mRNA were measured by Western blot and RT-PCR,respectively.Results The three drugs could improve renal function,reduce proteinuria,decrease plasma AVP and Ang Ⅱ levels,and down-regulate AQP2 and pS256-AQP2 protein and mRNA expression in model rats.Danggui Shaoyao San and tolvaptan were more ef-fective than losartan in reducing plasma AVP levels.Conclusions Danggui Shaoyao San may regulate the expression of AQP2 by reducing the levels of AVP and Ang Ⅱ,and improve the edema of nephrotic syndrome rats.

Aim To study the proliferation,invasion and migration ability of Quaking(QKI)in gastric cancer(GC)via elucidating the molecular mechanisms associated with QKI in the occurrence and development of GC through bioinformatics.Methods Differential expression analysis of QKI was performed across vari-ous human cancer samples by merging data from the TCGA and GTEx databases.The correlation was ana-lyzed between QKI protein expression and tumor muta-tion burden(TMB)score,microsatellite instability(MSI)score,and ESTIMATE score,and the correla-tion was also explored between QKI protein expression and overall survival(OS),disease free survival(DFS),and progression free survival(PFS).EMT related genes that could encode DECircRNAs were ob-tained through bioinformatics analysis to construct a QKI-EMT-circRNAs regulatory network.The differenti-ally expressed circRNAs and EMT related genes in TMK1 cells were verified.The proliferation,invasion and migration ability of the QKI was studied by using the knockdown system.Results QKI was differential-ly expressed in the vast majority of tumors and was closely related to TMB,MSI,and tumor microenviron-ment(TME);QKI emerged as a high-risk factor for predicting OS,DFS,and PFS in individuals with com-mon human cancers.QKI regulated the splicing of 6 EMT related gene transcripts to form eight circRNAs,all of which were significantly associated with the prog-nosis of gastric cancer patients.Cell experiments showed that compared to normal gastric epithelial cells,only hsa_ccirc_0004015,CALD1,and CDK14 were down-regulated in TMK1 cells.Knocking down QKI inhibited the proliferation,invasion and migration ability of TMK1 cells.Conclusion QKI exerts regu-latory control over the transcription of six EMT-related genes,resulting in the formation of circRNAs,thereby promoting the pathogenesis and progression of GC.QKI is highly expressed in TMK1 cells,and knock-down of QKI can inhibit the proliferation,invasion and migration ability of TMK1 cells.

Refractory prolactinoma is the most common pituitary neuroendocrine tumor.Dopamine receptor agonists(DA)are the primary choice for drug treatment.Most patients with prolactinomas respond well to DA.However,a minority of prolactinomas patients still show resistance to DA.Although drug-resistant and refractory prolactinomas are rare in clinical practice,their treatment is extremely challenging.Even a combination of drug therapy,multiple surgeries,and radiotherapy may not yield satisfactory outcomes.Therefore,standardizing the diagnosis and treatment process and pathway for refractory prolactionmas and exploring more effective multidisciplinary collaborative treatment strategies are urgent problems to be solved.In the clinical management of refractory prolactinomas,it is often necessary to consider the patient's condition comprehensively,replace other types of DA,or consider surgery,radiotherapy,and immunotherapy,which requires multidisciplinary diagnosis and treatment.This review synthesizes the latest literature at home and abroad to systematically discuss the latest advances in drug therapy,surgery,and radiotherapy treatments for refractory prolactionmas,aiming to provide new ideas for basic research,clinical diagnosis and treatment.

OBJECTIVE: To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method. METHODS: The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research. RESULTS: The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm. CONCLUSION The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.
Humans ; Imaging, Three-Dimensional/methods* ; Mandible/diagnostic imaging* ; Software ; Algorithms ; Anatomic Landmarks/anatomy & histology*

We used network pharmacology to predict the mechanism in the treatment of rheumatoid arthritis (RA) via modified Gan Cao Fu Zi Decoction (GCFZ), and validated the results of the analysis and explored the pharmacodynamic effects of GCFZ through animal experiments. Firstly, TCMID, SymMap, HERB, STITCH and GEO databases were utilized to obtain the target genes of GCFZ for the treatment of RA, which yielded a total of 1 250 differentially expressed genes for RA, 534 genes for GCFZ targets and 83 intersecting genes. Then functional enrichment analysis of the intersecting genes was performed through GO and KEGG databases, and the results revealed that GCFZ and its active ingredients mainly functioned through cytokine pathways, where chemokine signaling pathway and tumor necrosis factor (TNF) signaling pathway were enriched with a high number of genes. Cytoscape 3.8.0 software was used to construct the drug-target-disease network and screen key proteins, which included TNF, C-X-C chemokine ligand 8 (CXCL8), C-X-C chemokine ligand 10 (CXCL10), C-C chemokine ligand 5 (CCL5), C-X-C chemokine ligand 2 (CXCL2) and C-X-C chemokine receptor type 4 (CXCR4). The molecular docking technology was used to confirm the binding ability of the main active ingredients of GCFZ to the core proteins. Additionally, the therapeutic effects of GCFZ in low (4 g·kg^-1), medium (8 g·kg^-1) and high (16 g·kg^-1) dose groups were investigated by constructing the collagen-induced arthritis (CIA) rat model. X-ray imaging approach, HE staining and Safranin O-Fast Green staining showed that GCFZ treatment significantly improved bone destruction, synovial hyperplasia and cartilage damage in CIA rats, while immunofluorescence results showed that GCFZ treatment could regulate the expression of TNF, CXCL8 and CCL5. In summary, our results indicate that GCFZ contains a variety of small molecule pharmacodynamic substances, which can exert therapeutic effects via multiple targets and pathways, and obviously reduce the symptoms of arthritis in CIA rats. This animal experiment of our research was approved by the Experimental Animal Management and Ethics Committee of Bengbu Medical College.

OBJECTIVES: To compare the effect of different frequency of acupoint thread-embedding on weight loss in subjects with overweight/obesity of spleen deficiency and dampness retention. METHODS: A total of 126 subjects with overweight/obesity of spleen deficiency and dampness retention were randomized into a 2-week group(63 cases, 13 cases dropped out)and a 3-week group(63 cases, 11 cases dropped out, 1 case was eliminated). The two groups were treated with acupoint thread-embedding once every 2 weeks and once every 3 weeks respectively, Zhongwan(CV 12), Shuifen(CV 9), Qihai(CV 6), Guanyuan(CV 4) and bilateral Zhangmen(LR 13), Tianshu(ST 25), Liangmen(ST 21), Daheng(SP 15), Fujie(SP 14), Pishu(BL 20), Yinlingquan(SP 9)were selected. Four times were required in the two groups. Before and after treatment, follow-up after 2 months of treatment completion, the body mass index(BMI), body weight, waist circumference, hip circumference, waist-to-hip ratio, obesity degree, fat percentage(F%), skin fold thickness were observed in the two groups. RESULTS: After treatment and in follow-up, the BMI, body weight, waist circumference, hip circumference, waist-to-hip ratio, obesity degree, F%, skin fold thickness in the two groups were decreased compared with those before treatment (P<0.001, P<0.01), the changes of BMI, body weight, obesity degree, F%, skin fold thickness in the 2-week group were larger than those in the 3-week group(P<0.05, P<0.01, P<0.001). CONCLUSIONS The effect of acupoint thread-embedding once every 2 weeks on weight loss in subjects with overweight/obesity of spleen deficiency and dampness retention is superior to that once every 3 weeks.
Humans ; Acupuncture Points ; Overweight/therapy* ; Spleen ; Obesity/therapy* ; Body Weight ; Acupuncture Therapy ; Weight Loss

Objective: To provide a new solution for the digital design of nasal prostheses, this study explores the three-dimensional (3D) facial morphology completion method for external nasal defects based on the non-rigid registration process of 3D face template. Methods: A total of 20 male patients with tooth defect and dentition defect who visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology from June to December 2022 were selected, age 18-45 years old. The original 3D facial data of patients were collected, and the 3D facial data of the external nose defect was constructed in Geomagic Wrap 2021 software. Using the structured 3D face template data constructed in the previous research of the research group, the 3D face template was deformed and registered to the 3D facial data of external nose defect (based on the morphology of non-defective area) by non-rigid registration algorithm (MeshMonk program), and the personalized deformed data of the 3D face template was obtained, as the complemented facial 3D data. Based on the defect boundary of the 3D facial data of the external nose defect, the complemented external nose 3D data can be cut out from the complemented facial 3D data. Then the nasofacial angle and nasolabial angle of the complemented facial 3D data and the original 3D facial data was compared and analyzed, the ratio between the nose length and mid-face height, nose width and medial canthal distance of the complemented facial 3D data was measured, the edge fit between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was evaluated, and the morphological difference of the nose between the complemented external nose 3D data and the original 3D facial data was analyzed. Results: There was no significant statistically difference (t=-0.23, P=0.823; Z=-1.72, P=0.086) in the nasofacial angle (28.2°±2.9°, 28.4°±3.5° respectively) and nasolabial angle [95.4°(19.2°), 99.9°(9.5°) respectively] between the 20 original 3D facial data and the complemented facial 3D data. The value of the ratio of nose length to mid-face height in the complemented facial 3D data was 0.63±0.03, and the value of the ratio of nose width to medial canthal distance was 1.07±0.08. The curve deviation (root mean square value) between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was (0.37±0.09) mm, the maximum deviation was (1.14±0.32) mm, and the proportion of the curve deviation value within±1 mm was (97±3)%. The distance of corresponding nose landmarks between the complemented facial 3D data and the original 3D facial data were respectively, Nasion: [1.52(1.92)] mm; Pronasale: (3.27±1.21) mm; Subnasale: (1.99±1.09) mm; Right Alare: (2.64±1.34) mm; Left Alare: (2.42± 1.38) mm. Conclusions: The method of 3D facial morphology completion of external nose defect proposed in this study has good feasibility. The constructed complemented external nose 3D data has good facial coordination and edge fit, and the morphology is close to the nose morphology of the original 3D facial data.

Objective: To explore an automatic landmarking method for anatomical landmarks in the three-dimensional (3D) data of the maxillary complex and preliminarily evaluate its reproducibility and accuracy. Methods: From June 2021 to December 2022, spiral CT data of 31 patients with relatively normal craniofacial morphology were selected from those who visited the Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology. The sample included 15 males and 16 females, with the age of (33.3±8.3) years. The maxillary complex was reconstructed in 3D using Mimics software, and the resulting 3D data of the maxillary complex was mesh-refined using Geomagic software. Two attending physicians and one associate chief physician manually landmarked the 31 maxillary complex datasets, determining 24 anatomical landmarks. The average values of the three expert landmarking results were used as the expert-defined landmarks. One case that conformed to the average 3D morphological characteristics of healthy individuals' craniofacial bones was selected as the template data, while the remaining 30 cases were used as target data. The open-source MeshMonk program (a non-rigid registration algorithm) was used to perform an initial alignment of the template and target data based on 4 landmarks (nasion, left and right zygomatic arch prominence, and anterior nasal spine). The template data was then deformed to the shape of the target data using a non-rigid registration algorithm, resulting in the deformed template data. Based on the unchanged index property of homonymous landmarks before and after deformation of the template data, the coordinates of each landmark in the deformed template data were automatically retrieved as the automatic landmarking coordinates of the homonymous landmarks in the target data, thus completing the automatic landmarking process. The automatic landmarking process for the 30 target data was repeated three times. The root-mean-square distance (RMSD) of the dense corresponding point pairs (approximately 25 000 pairs) between the deformed template data and the target data was calculated as the deformation error of the non-rigid registration algorithm, and the intra-class correlation coefficient (ICC) of the deformation error in the three repetitions was analyzed. The linear distances between the automatic landmarking results and the expert-defined landmarks for the 24 anatomical landmarks were calculated as the automatic landmarking errors, and the ICC values of the 3D coordinates in the three automatic landmarking repetitions were analyzed. Results: The average three-dimensional deviation (RMSD) between the deformed template data and the corresponding target data for the 30 cases was (0.70±0.09) mm, with an ICC value of 1.00 for the deformation error in the three repetitions of the non-rigid registration algorithm. The average automatic landmarking error for the 24 anatomical landmarks was (1.86±0.30) mm, with the smallest error at the anterior nasal spine (0.65±0.24) mm and the largest error at the left oribital (3.27±2.28) mm. The ICC values for the 3D coordinates in the three automatic landmarking repetitions were all 1.00. Conclusions: This study established an automatic landmarking method for three-dimensional data of the maxillary complex based on a non-rigid registration algorithm. The accuracy and repeatability of this method for landmarking normal maxillary complex 3D data were relatively good.
Male ; Female ; Humans ; Adult ; Imaging, Three-Dimensional/methods* ; Reproducibility of Results ; Algorithms ; Software ; Tomography, Spiral Computed ; Anatomic Landmarks/anatomy & histology*