OBJECTIVE: To explore the mechanism of electroacupuncture (EA) in promoting recovery of the facial function with the involvement of autophagy, glial cell line-derived neurotrophic factor (GDNF), and phosphatidylinositol-3-kinase (PI3K)/mammalian target of rapamycin (mTOR) signaling pathway. METHODS: Seventy-two male Sprague-Dawley rats were randomly allocated into the control, sham-operated, facial nerve injury (FNI), EA, EA+3-methyladenine (3-MA), and EA+GDNF antagonist groups using a random number table, with 12 rats in each group. An FNI rat model was established with facial nerve crushing method. EA intervention was conducted at Dicang (ST 4), Jiache (ST 6), Yifeng (SJ 17), and Hegu (LI 4) acupoints for 2 weeks. The Simone's 10-Point Scale was utilized to monitor the recovery of facial function. The histopathological evaluation of facial nerves was performed using hematoxylin-eosin (HE) staining. The levels of Beclin-1, light chain 3 (LC3), and P62 were detected by immunohistochemistry (IHC), immunofluorescence, and reverse transcription-polymerase chain reaction, respectively. Additionally, IHC was also used to detect the levels of GDNF, Rai, PI3K, and mTOR. RESULTS: The facial functional scores were significantly increased in the EA group than the FNI group (P<0.05 or P<0.01). HE staining showed nerve axons and myelin sheaths, which were destroyed immediately after the injury, were recovered with EA treatment. The expressions of Beclin-1 and LC3 were significantly elevated and the expression of P62 was markedly reduced in FNI rats (P<0.01); however, EA treatment reversed these abnormal changes (P<0.01). Meanwhile, EA stimulation significantly increased the levels of GDNF, Rai, PI3K, and mTOR (P<0.01). After exogenous administration with autophagy inhibitor 3-MA or GDNF antagonist, the repair effect of EA on facial function was attenuated (P<0.05 or P<0.01). CONCLUSIONS EA could promote the recovery of facial function and repair the facial nerve damages in a rat model of FNI. EA may exert this neuroreparative effect through mediating the release of GDNF, activating the PI3K/mTOR signaling pathway, and further regulating the autophagy of facial nerves.
Rats ; Male ; Animals ; Rats, Sprague-Dawley ; Electroacupuncture ; Phosphatidylinositol 3-Kinase/metabolism* ; Facial Nerve Injuries/therapy* ; Phosphatidylinositol 3-Kinases/metabolism* ; Beclin-1 ; Glial Cell Line-Derived Neurotrophic Factor ; Signal Transduction ; TOR Serine-Threonine Kinases/metabolism* ; Autophagy ; Mammals/metabolism*

Brasilicardin A, a diterpene glycoside isolated from pathogenic actinomycete Nocardia brasiliensis IFM 0406, has become a novel immunosuppressant candidate due to its significant immunosuppressive activity, low toxicity and unique mechanism of action. However, brasilicardin A and its analogues have become a research hotspot to the development of this promising immunosuppressant because of the low-yield production in the natural pathogenic producer and the synthetically challenging skeleton. According to the reported biosynthetic pathway of brasilicardin A, the function of involved diterpene synthase was analyzed by bioinformatics. Then the genes bra1-5 that synthesize the brasilicardin A skeleton were directionally amplified from the pathogenic strain N. brasiliensis IFM 0406, and heterologous expression was achieved successfully in Streptomyces albus R1. The compounds were isolated and purified by using various column chromatographies including silica gel column chromatography and semi-preparative HPLC. Six new brasilicardins were established and named brasilicardin H-M. The activity of brasilicardins was screened using lipopolysaccharide (LPS)-activated mouse primary macrophage inflammation model. Brasilicardin H-M exhibited good inhibitory activity on nitric oxide (NO) release with IC₅₀ values of 28.24 ± 3.70, 37.44 ± 2.00, 39.85 ± 4.02, 26.77 ± 4.40, 65.25 ± 1.48 and 15.24 ± 2.72 μmol·L^-1, respectively (indomethacin as the positive control with IC₅₀ value of 34.28 ± 4.10 μmol·L^-1). The results indicated that six compounds had potential anti-inflammatory activity. This study laid a foundation for the elucidation of the brasilicardin A biosynthetic pathway and evaluation of the structure-activity relationship as well as new drug developments.

Objective To develop a portable collection device of human exhaled breath condensate(EBC)based on natural breathing to meet the needs for rapid screening of human respiratory tract(especially lower respiratory tract)infections.Methods The device consisted of a refrigeration unit,a heat dissipation unit and a condensation unit.The refrigeration unit adopted a TES1-7102 thermoelectric Peltier cooler semiconductor as the refrigeration element;the heat dissipation unit was composed of a high thermal conductivity aluminum heat sink and a high-speed brushless cooling fan;the condensation unit was made up of a cold guide plate and a condenser,in which the cold guide plate was made of thin sheet of aluminum alloy,and the condenser was prepared by 3D printing technology and made of hydrophobic polylactic acid,with primary and secondary 2-stage guide grooves and an ultra-thin condensing surface.The performance of the device was verified in terms of cooling,thermal conductivity,condensation and human EBC collection and content analysis.Results Performance analysis showed that after refrigeration began the temperature difference between the condenser surface and the exhaled gas met the requirements of the condenser,and no obvious thermal resistance was found on the condensing surface so that large droplets could be formed rapidly and then be collected after the gas-liquid phase change of the exhaled gas on the condensing surface.Human EBC collection and content analysis indicated the device realized home self-collection of EBCs from people of all ages,and the concentrations of interleukins,C-reactive protein and other inflammation-related indexes and the pH value of the collected EBC samples were all correlated with respiratory infections in the subjects.Conclusion The device developed with easy operation avoids the discomfort of blowing collection and the risk of saliva contamination,and is worthy promoting for rapid diagnosis and dynamic monitoring of respiratory tract infection and other related diseases.[Chinese Medical Equipment Journal,2024,45(8):32-37]

Objective:To explore the key factors affecting plasma clot retraction and optimize the experimental method of plasma clot retraction,in order to study the regulation of platelet function and evaluate the modulatory effects of drugs on plasma clot retraction.Methods:The effects of different concentrations of thrombin,Ca2+and platelets on plasma clot retraction were studied,and the detection system of plasma clot retraction was optimized.The availability of the detection system was then validated by analyzing the regulatory effects of multiple signaling pathway inhibitors on plasma clot retraction.Results:Through the optimization study of multiple factors,platelet rich plasma(PRP)containing 0.5 mmol/L Ca2+and 40 × 109/L platelets was treated with 0.2 U/ml thrombin to perform plasma clot retraction analysis.After treatment with thrombin for 15 min,plasma clot retracted significantly.After treatment with thrombin for 30 min,the percentage of plasma clot retraction was more than 50％.The regulatory effects of multiple signaling pathway inhibitors on plasma clot retraction were studied in this detection system.PKC inhibitor Go 6983 exhibited a significant inhibitory effect on plasma clot retraction,while PI3K inhibitor Ly294002 and p38 MAPK inhibitor SB203580 slightly suppressed plasma clot retraction.Conclusion:PRP containing 0.5 mmol/L Ca2+and 40 × 109/L platelets can be induced with 0.2 U/ml thrombin to conduct plasma clot retraction analysis,which can be used to study the regulation of platelet function and evaluate the modulatory effects of drugs on plasma clot retraction.

This study aimed to explore the potentiating effect and mechanism of the extract of Jingfang Granules(JFG) on the activation of macrophages. The RAW264.7 cells were treated with JFG extract and then stimulated by multiple agents. Subsequently, mRNA was extracted, and reverse transcription-polymerase chain reaction(RT-PCR) was used to measure the mRNA transcription of multiple cytokines in RAW264.7 cells. The levels of cytokines in the cell supernatant were detected by enzyme-linked immunosorbent assay(ELISA). In addition, the intracellular proteins were extracted and the activation of signaling pathways was determined by Western blot. The results showed that JFG extract alone could not promote or slightly promote the mRNA transcription of TNF-α, IL-6, IL-1β, MIP-1α, MCP-1, CCL5, IP-10, and IFN-β, and significantly enhance the mRNA transcription of these cytokines in RAW264.7 cells induced by R848 and CpG in a dose-dependent manner. Furthermore, JFG extract also potentiated the secretion of TNF-α, IL-6, MCP-1, and IFN-β by RAW264.7 cells stimulated with R848 and CpG. As revealed by mechanism analysis, JFG extract enhanced the phosphorylation of p38, ERK1/2, IRF3, STAT1, and STAT3 in RAW264.7 cells induced by CpG. The findings of this study indicate that JFG extract can selectively potentiate the activation of macrophages induced by R848 and CpG, which may be attributed to the promotion of the activation of MAPKs, IRF3, and STAT1/3 signaling pathways.
Tumor Necrosis Factor-alpha/metabolism* ; Interleukin-6/metabolism* ; Plant Extracts/metabolism* ; Lipopolysaccharides/pharmacology* ; Macrophages ; Cytokines/metabolism* ; RNA, Messenger/metabolism*

This study aimed to characterize and identify the non-volatile components in Pogostemonis Herba by using ultra-perfor-mance liquid chromatography-quadrupole-time of flight-mass spectrometry(UPLC-Q-TOF-MS) combined with UNIFI and an in-house library. The chemical components in 50% methanol extract of Pogostemonis Herba were detected by UPLC-Q-TOF-MS in both positive and negative MS~E continuum modes. Then, the MS data were processed in UNIFI combined with an in-house library to automatically characterize the metabolites. Based on the multiple adduct ions, exact mass, diagnostic fragment ions, and peak intensity of compounds and the fragmentation pathways and retention behaviors of reference substances, the structures identified by UNIFI were further verified and those of the unidentified compounds were tentatively elucidated. A total of 120 compound structures were identified or tentatively identified, including flavonoids, phenylpropanoids, phenolic acids, terpenes, fatty acids, alkaloids, and phenylethanoid glycosides. Sixteen of them were accurately identified by comparison with reference substances, and 53 compounds were reported the first time for Pogostemonis Herba. This study systematically characterized and identified the non-volatile compounds in Pogostemonis Herba for the first time. The findings provide a scientific basis for revealing the pharmacodynamic material basis, establishing a quality control system, and developing products of Pogostemonis Herba.

OBJECTIVE: To explore an efficient and automatic method for determining the anatomical landmarks of three-dimensional(3D) mandibular data, and to preliminarily evaluate the performance of the method. METHODS: The CT data of 40 patients with normal craniofacial morphology were collected (among them, 30 cases were used to establish the 3D mandibular average model, and 10 cases were used as test datasets to validate the performance of this method in determining the mandibular landmarks), and the 3D mandibular data were reconstructed in Mimics software. Among the 40 cases of mandibular data after the 3D reconstruction, 30 cases that were more similar to the mean value of Chinese mandibular features were selected, and the size of the mandibular data of 30 cases was normalized based on the Procrustes analysis algorithm in MATLAB software. Then, in the Geomagic Wrap software, the 3D mandibular average shape model of the above 30 mandibular data was constructed. Through symmetry processing, curvature sampling, index marking and other processing procedures, a 3D mandible structured template with 18 996 semi-landmarks and 19 indexed mandibular anatomical landmarks were constructed. The open source non-rigid registration algorithm program Meshmonk was used to match the 3D mandible template constructed above with the tested patient's 3D mandible data through non-rigid deformation, and 19 anatomical landmark positions of the patient's 3D mandible data were obtained. The accuracy of the research method was evaluated by comparing the distance error of the landmarks manually marked by stomatological experts with the landmarks marked by the method of this research. RESULTS: The method of this study was applied to the data of 10 patients with normal mandibular morphology. The average distance error of 19 landmarks was 1.42 mm, of which the minimum errors were the apex of the coracoid process [right: (1.01±0.44) mm; left: (0.56±0.14) mm] and maximum errors were the anterior edge of the lowest point of anterior ramus [right: (2.52±0.95) mm; left: (2.57±1.10) mm], the average distance error of the midline landmarks was (1.15±0.60) mm, and the average distance error of the bilateral landmarks was (1.51±0.67) mm. CONCLUSION The automatic determination method of 3D mandibular anatomical landmarks based on 3D mandibular average shape model and non-rigid registration algorithm established in this study can effectively improve the efficiency of automatic labeling of 3D mandibular data features. The automatic determination of anatomical landmarks can basically meet the needs of oral clinical applications, and the labeling effect of deformed mandible data needs to be further tested.
Humans ; Imaging, Three-Dimensional/methods* ; Mandible/diagnostic imaging* ; Software ; Algorithms ; Anatomic Landmarks/anatomy & histology*

Moutan Cortex(MC) residues produced after the extraction of MC can be re-extracted for active components and used to produce organic fertilizer and animal feed. However, they are currently disposed as domestic waste, which pollutes the environment. This study analyzed the chemical composition of the medicinal material, residues, and residue compost of MC by UPLC-UV-Q-TOF-MS. Furthermore, the nutrient composition of MC residues and the residue compost was analyzed. The results showed that:(1)MC residues had lower content of chemicals than the medicinal material, and content of paeonol, gallic acid, and galloylglucose in MC residues were about 1/3 of that in the medicinal material. The content of chemicals were further reduced after residue composting, and the quantitative compounds were all below the limits of detection.(2)Compared with MC residues, the residue compost showed the total nitrogen, total phosphorus, total potassium, and organic matter content increasing by 122.67%, 31.32%, 120.39%, and 32.06%, respectively. Therefore, we concluded that the MC residues can be used to re-extract active compounds such as paeonol, gallic acid, and galloylglucose. The MC residue compost is a high-quality organic fertilizer containing minimal content of chemicals and can be widely used in the cultivation of Chinese medicinal herbs.
Animals ; Composting ; Fertilizers ; Soil/chemistry* ; Hydrolyzable Tannins ; Nutrients ; Acetophenones ; Drugs, Chinese Herbal ; Paeonia

Shenfu Injection(SFI) is praised for the high efficacy in the treatment of septic shock. However, the precise role of SFI in the treatment of sepsis-associated lung injury is not fully understood. This study investigated the protective effect of SFI on sepsis-associated lung injury by a clinical trial and an animal experiment focusing on the hypoxia-inducing factor-1α(HIF-1α)-mediated mitochondrial autophagy. For the clinical trial, 70 patients with sepsis-associated lung injury treated in the emergency intensive care unit of the First Affiliated Hospital of Zhengzhou University were included. The levels of interleukin(IL)-6 and tumor necrosis factor(TNF)-α were measured on days 1 and 5 for every patient. Real-time quantitative polymerase chain reaction(RT-qPCR) was performed to determine the mRNA level of hypoxia inducible factor-1α(HIF-1α) in the peripheral blood mononuclear cells(PBMCs). For the animal experiment, 32 SPF-grade male C57BL/6J mice(5-6 weeks old) were randomized into 4 groups: sham group(n=6), SFI+sham group(n=10), SFI+cecal ligation and puncture(CLP) group(n=10), and CLP group(n=6). The body weight, body temperature, wet/dry weight(W/D) ratio of the lung tissue, and the pathological injury score of the lung tissue were recorded for each mouse. RT-qPCR and Western blot were conducted to determine the expression of HIF-1α, mitochondrial DNA(mt-DNA), and autophagy-related proteins in the lung tissue. The results of the clinical trial revealed that the SFI group had lowered levels of inflammatory markers in the blood and alveolar lavage fluid and elevated level of HIF-1α in the PBMCs. The mice in the SFI group showed recovered body temperature and body weight. lowered TNF-α level in the serum, and decreased W/D ratio of the lung tissue. SFI reduced the inflammatory exudation and improved the alveolar integrity in the lung tissue. Moreover, SFI down-regulated the mtDNA expression and up-regulated the protein levels of mitochondrial transcription factor A(mt-TFA), cytochrome c oxidase Ⅳ(COXⅣ), HIF-1α, and autophagy-related proteins in the lung tissue of the model mice. The findings confirmed that SFI could promote mitophagy to improve mitochondrial function by regulating the expression of HIF-1α.
Humans ; Male ; Mice ; Animals ; Leukocytes, Mononuclear ; Mice, Inbred C57BL ; Lung/metabolism* ; Acute Lung Injury/drug therapy* ; Tumor Necrosis Factor-alpha/genetics* ; Sepsis/genetics* ; Hypoxia/pathology* ; Autophagy-Related Proteins ; Body Weight ; Drugs, Chinese Herbal

Objective: To provide a new solution for the digital design of nasal prostheses, this study explores the three-dimensional (3D) facial morphology completion method for external nasal defects based on the non-rigid registration process of 3D face template. Methods: A total of 20 male patients with tooth defect and dentition defect who visited the Department of Prosthodontics, Peking University School and Hospital of Stomatology from June to December 2022 were selected, age 18-45 years old. The original 3D facial data of patients were collected, and the 3D facial data of the external nose defect was constructed in Geomagic Wrap 2021 software. Using the structured 3D face template data constructed in the previous research of the research group, the 3D face template was deformed and registered to the 3D facial data of external nose defect (based on the morphology of non-defective area) by non-rigid registration algorithm (MeshMonk program), and the personalized deformed data of the 3D face template was obtained, as the complemented facial 3D data. Based on the defect boundary of the 3D facial data of the external nose defect, the complemented external nose 3D data can be cut out from the complemented facial 3D data. Then the nasofacial angle and nasolabial angle of the complemented facial 3D data and the original 3D facial data was compared and analyzed, the ratio between the nose length and mid-face height, nose width and medial canthal distance of the complemented facial 3D data was measured, the edge fit between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was evaluated, and the morphological difference of the nose between the complemented external nose 3D data and the original 3D facial data was analyzed. Results: There was no significant statistically difference (t=-0.23, P=0.823; Z=-1.72, P=0.086) in the nasofacial angle (28.2°±2.9°, 28.4°±3.5° respectively) and nasolabial angle [95.4°(19.2°), 99.9°(9.5°) respectively] between the 20 original 3D facial data and the complemented facial 3D data. The value of the ratio of nose length to mid-face height in the complemented facial 3D data was 0.63±0.03, and the value of the ratio of nose width to medial canthal distance was 1.07±0.08. The curve deviation (root mean square value) between the edge curve of the complemented external nose 3D data and the defect edge curve of the 3D facial data of external nose defect was (0.37±0.09) mm, the maximum deviation was (1.14±0.32) mm, and the proportion of the curve deviation value within±1 mm was (97±3)%. The distance of corresponding nose landmarks between the complemented facial 3D data and the original 3D facial data were respectively, Nasion: [1.52(1.92)] mm; Pronasale: (3.27±1.21) mm; Subnasale: (1.99±1.09) mm; Right Alare: (2.64±1.34) mm; Left Alare: (2.42± 1.38) mm. Conclusions: The method of 3D facial morphology completion of external nose defect proposed in this study has good feasibility. The constructed complemented external nose 3D data has good facial coordination and edge fit, and the morphology is close to the nose morphology of the original 3D facial data.