Objective: To investigate the epidemiological and spatio-temporal characteristics of influenza in Jiaxing City, Zhejiang Province, so as to provide insights into perfecting the prevention and control strategies of influenza. Methods: Data of influenza in Jiaxing City from 2019 to 2023 were collected from the Chinese Disease Prevention and Control Information System. Population data of the same period were collected from the Zhejiang Health Information Network Reporting System. The epidemiological characteristics of influenza were analyzed using descriptive analysis. Vector map information was collected from the Open Street Map, and the spatio-temporal clustering characteristics of influenza were analyzed using spatial autocorrelation and spatio-temporal scanning. Results: A total of 181 501 cases of influenza were reported in Jiaxing City from 2019 to 2023, with an average annual reported incidence of 653.93/105. The majority of cases were aged 5 to <15 years (59 785 cases, 32.94%). The majority of the occupations were students (78 239 cases, 43.11%) and pre-school children (33 715 cases, 18.58%). The county (city, district) with the highest reported incidence was Haining City (1 451.70/105), and the town (street) with the highest reported incidence was Chang'an Town (1 932.78/105). Spatial autocorrelation analysis showed that the incidence of influenza in Jiaxing City from 2019 to 2023 had positive spatial correlations (all Moran's I>0, all P<0.05), with a high-high clustering in the southern region. Spatio-temporal scanning analysis showed that there was a spatio-temporal clustering of influenza in Jiaxing City from 2019 to 2023, with the southern region being the primary-type clustering area and the period between November and January of the following year being the clustering time. Conclusion There was a significant spatio-temporal clustering of influenza in Jiaxing City from 2019 to 2023, with winter being the peak season and the southern region being the primary area.

ObjectiveTo explore the possible mechanisms of electroacupuncture at Fengchi （GB 20）， Waiguan （TE 5）， and Yanglingquan （GB 34） in treating chronic migraine from the perspective of nociceptive sensitization. MethodsForty SPF-grade SD rats were randomly divided into blank group， model group， electroacupuncture group， electroacupuncture + agonist group， and inhibitor group， with 8 rats in each group. Except for the blank group， rats were injected intraperitoneally with nitroglycerin to establish a chronic migraine rat model. After successful modeling， the electroacupuncture group received electroacupuncture at bilateral "Fengchi" （GB 20）， "Waiguan" （TE 5）， and "Yanglingquan" （GB 34） for 30 minutes each session. The electroacupuncture + agonist group received the same electroacupuncture treatment and additional injection of protein kinase C （PKC） agonist Phorbol 12-myristate 13-acetate （1.0 ng/μl， 25 μl） via the infraorbital foramen. The inhibitor group received PKC inhibitor Chelerythrine Chloride （1.0 ng/μl， 10 μl） via the infraorbital foramen. The blank group， model group， and inhibitor group underwent restraint for 30 minutes without other interventions. All groups were continuously intervened for 5 days. After the intervention， the nociceptive thresholds （mechanical and thermal pain） of the periorbital area and hind paw were measured. The expression levels of transient receptor potential vanillic acid subtype 1 （TRPV1）， phosphorylated TRPV1 （p-TRPV1）， PKC proteins， Trpv1， Pkc mRNA， and the average fluorescence intensity of transient receptor potential vanillic acid subtype 1 （TRPV1） and PKC in the trigeminal ganglion were detected using Western Blot， real-time fluorescence quantitative PCR， and immunofluorescence methods. ResultsCompared with the blank group， the mechanical and thermal pain thresholds of the periorbital area and hind paw were reduced in the model group， and the protein levels of TRPV1， PKC， p-TRPV1， as well as the mRNA expression of Trpv1 and Pkc， and the average fluorescence intensity of TRPV1 and PKC in the trigeminal ganglion significantly increased （P＜0.05 or P＜0.01）. Compared with the model group， the electroacupuncture group exhibited increased mechanical and thermal pain thresholds in the periorbital and hind paw areas， and decreased protein levels of TRPV1， PKC， p-TRPV1， mRNA expression of Trpv1 and Pkc， and average fluorescence intensity of TRPV1. In the electroacupuncture + agonist group， the average fluorescence intensity of TRPV1 in the trigeminal ganglion decreased. The inhibitor group exhibited increased mechanical pain thresholds in the periorbital area and thermal pain thresholds in the hind paw， along with decreased protein levels of TRPV1， PKC， p-TRPV1， and the average fluorescence intensity of TRPV1 and PKC （P＜0.05 or P＜0.01）. Compared with the electroacupuncture group， the electroacupuncture + agonist group showed an increase in the protein levels of TRPV1， PKC， p-TRPV1， and the mRNA expression of Trpv1 （P＜0.05 or P＜0.01）. ConclusionElectroacupuncture at the "Fengchi" （GB 20）， "Waiguan" （TE 5）， and "Yanglingquan" （GB 34） acupoints can increase the mechanical and thermal pain thresholds in chronic migraine rats and alleviate nociceptive sensitization. The mechanism may be related to the inhibition of PKC/TRPV1 pathway.

ObjectiveTo explore the potential mechanism of acupuncture with the method of soothing the liver and regulating the mind in improving depressive disorder. MethodsEighteen C57BL/6J mice were randomly divided into blank group， model group， and acupuncture group， with 6 mice in each group. The model group and the acupuncture group were subjected to depression induction by intraperitoneal injection of lipopolysaccharide （LPS）， while the blank group received an equal volume of normal saline once daily for seven consecutive days. Concurrently， the acupuncture group received "soothing the liver and regulating the mind" acupuncture intervention starting from the first day of modeling， once daily for 14 days； whereas the blank group and the model group were only restrained without acupuncture. The sucrose preference test was used to assess sucrose preference rate， the open-field test to measure center stay time and total travel distance， and the forced swim test to evaluate immobility time. Hematoxylin-eosin （HE） staining was performed to observe hippocampal morphological changes. Enzyme-linked immunosorbent assay （ELISA） was used to detect levels of interleukin-1β （IL-1β）， interleukin-6 （IL-6）， and tumor necrosis factor-α （TNF-α） in hippocampal tissue. Western blot analysis was conducted to examine the protein expression levels of Toll-like receptor 4 （TLR4） and nuclear factor-κB （NF-κB） in the hippocampus. ResultsCompared to the blank group， the model group showed a significant reduction in sucrose preference rate， center stay time， and total travel distance， along with a significant increase in immobility time in the forced swim test， hippocampal IL-1β， IL-6， and TNF-α levels， as well as TLR4 and NF-κB protein expression （P＜0.01）， and the histological examination revealed blurred hippocampal neuronal boundaries， loose arrangement， and some neurons exhibiting nuclear pyknosis and deep staining. Compared to the model group， the acupuncture group demonstrated a significant increase in sucrose preference rate， center stay time， and total travel distance， along with a significant reduction in immobility time in the forced swim test， hippocampal IL-1β， IL-6， and TNF-α levels， and TLR4 and NF-κB protein expression （P＜0.01）， and the histological analysis showed that hippocampal neurons in the acupuncture group were more tightly arranged， with reduced nuclear pyknosis and deep staining. ConclusionAcupuncture with the "soothing the liver and regulating the mind" method can significantly improve depression-like behavior， potentially by inhibiting the hippocampal TLR4/NF-κB signaling pathway and alleviating inflammatory responses.

OBJECTIVE To explore the main factors influencing the blood concentration of duloxetine， and provide a scientific basis for the individualized use of duloxetine. METHODS Retrospective analysis was conducted on 434 inpatients with depressive disorders at the First Hospital of Hebei Medical University， who were treated with duloxetine and underwent blood concentration monitoring between January 2022 and April 2024. The study examined the impact of various factors， including gender， age， body mass index （BMI）， gene phenotypes， combined medication， drug type （original/generic）， and genotyping results of gene single nucleotide polymorphism loci， on blood concentration and the concentration-to-dose （C/D） after dose adjustment. RESULTS The blood concentration of duloxetine was 76.65 （45.57， 130.31） ng/mL， and C/D was 0.96 （0.63， 1.60） ng·d/（mL·mg）. The blood concentration of duloxetine was positively correlated with the daily dose of administration （R2＝0.253 7， P＜0.001）. Blood concentration of duloxetine in 38.94% of patients exceeded the recommended range specified in the guidelines. Gender， age， BMI， combined use of CYP2D6 enzyme inhibitors， and CYP2D6 and CYP1A2 phenotypes had significant effects on C/D of duloxetine （P＜0.05）. CONCLUSIONS The patient’s age， gender， BMI， combined medication， and genetic phenotypes are closely related to the blood concentration of duloxetine.

ObjectiveTo explore the differences in the accumulation of secondary metabolites of Dendrobium nobile cultivated on epiphytic stones and trees， so as to elucidate the scientific connotation of "only those that grow on stones has superior quality"， and provide a direction for the cultivation and quality evaluation of D. nobile. MethodsUltra-performance liquid chromatography-triple quadrupole/linear ion trap mass spectrometry（UPLC-QTRAP-MS/MS）-based widely targeted metabolomics was used to detect the metabolites of D. nobile cultivated on epiphytic stones and trees. And the combination of principal component analysis（PCA）， hierarchical cluster analysis（HCA）， and orthogonal partial least squares-discriminant analysis（OPLS-DA） was performed for multivariate statistical analysis of metabolites. Differential metabolites were screened by variable importance in the projection（VIP） value≥1 and log₂fold change（FC）≥1 or ≤-1， and Kyoto Encyclopedia of Genes and Genomes（KEGG） enrichment analysis was conducted. ResultsA total of 1 267 metabolites were identified in the stems of D. nobile from the two cultivation modes， dominated by flavonoids（292）， phenolic acids（284）， and alkaloids（189）. Through OPLS-DA screening， 473 differential metabolites were obtained. Compared to epiphytic tree-cultivated D. nobile， epiphytic stone-cultivated D. nobile exhibited upregulation of flavonoids， phenolic acids， alkaloids， lignans and coumarins， while quinones and terpenoids were down-regulated. The differential metabolites mainly included flavonoid glycosides and alkaloids， and these differential metabolites significantly contributed to characterizing the two cultivation patterns. KEGG enrichment analysis revealed significant enrichment in pathways of flavone and flavonol biosynthesis， flavonoid biosynthesis， tyrosine metabolism， and phenylalanine metabolism in epiphytic stone-cultivated D. nobile. ConclusionEpiphytic stone cultivation is beneficial for the accumulation of phenolic acids， flavonoids， and alkaloids in D. nobile， indicating that the "only those that grow on stones has superior quality" documented in the materia medica has certain scientific basis， and the findings also provide a reference for quality evaluation and discrimination research between epiphytic stone and tree cultivated D. nobile.

Curcumin is a natural yellow pigment， a natural phenolic antioxidant extracted from the rhizomes of Curcuma longa and Curcumae Rhizoma of the ginger family， with anti-inflammatory， anti-tumor and antioxidant properties. In recent years， it has been found that curcumin also has good antidepressant properties， and it is considered a safe and effective antidepressant potential drug. The mechanism of curcumin’s antidepressant efficacy mainly includes regulating neurotransmitters， modulating the hypothalamic-pituitary-adrenal axis， regulating brain-derived neurotrophic factor， inhibiting neuroinflammation， inhibiting oxidative stress， and regulating gut microbiota， etc.， and there is an overlapping and synergistic therapeutic effect of the above mechanisms. At present， the antidepressant mechanism of curcumin is still not fully understood， and will be combined with multi-omics technology， new formulation technology， and clinical trials to obtain further breakthroughs in the future.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.