Objective:To investigate the survival rate and clinical failure reasons of onlay and occlusal veneer restorations retrospectively,and to put forward valuable suggestions for the selection of clinical in-dications.Methods:A total of 102 patients and 124 teeth treated by one of the authors from 2016 to 2019 were subjected to CAD/CAM lithium silicate reinforced glass-ceramic onlay or veneer restorations of premolars and molars,including 43 teeth with pulp vitality,81 endodontic treated teeth,and occlusal thickness of restoration was 1.5 mm.After four years of restoration,retrospective surveys were conducted to record the survival rate of restorations,the causes of restoration failure,and patient satisfaction rates,and the survival rate of restorations between vital teeth and endodontic treated teeth and among restored teeth was statistically analyzed by Chi-square test.Results:The survival rates of restorations on vital teeth and endodontic treated teeth were 95.5％and 90.0％,respectively,the average survival rate was 90.2％.The survival rates of vital teeth were higher than those of endodontic treated teeth without statis-tical difference.There was also no statistically significant difference among the tooth locations.The cau-ses of failure included the cracking of the restoration,the loss of the restoration,the fracture of the abut-ment teeth,secondary caries below the adjacent contact point,and food impaction caused by the loose-ning of the adjacent contact point.The overall patient satisfaction rate was 91.5％.Conclusion:The 4-year survival rate of glass-ceramic onlays and occlusal veneers is lower than that of the full crown restora-tion,and there are more complications than that of the single-crown restorations.The design of the resto-ration should be carefully selected based on the vitality of the abutment tooth and the remaining amount of tooth tissue.When there is too little tooth structure left,a post and crown should be selected for restora-tion.Adequate strength and thickness of the restoration should be ensured to prevent food impaction.Due to the small amount of abutment tooth preparation,it has the advantages of less stimulation of the pulp and periodontal tissue,and can be recommended as a trial restoration.

In fixed prosthodontics, clear exposure of the preparation margin is the prerequisite for obtaining accurate digital impressions and improving the marginal fit of restorations. To resolve the issues associated with the cord retraction technique, such as pain, acute injury, and prolonged procedural time, this study proposes a new technology for intraoral digital impression taking with pneumatic gingival retraction. The new scanning head blows a high-speed airflow that instantaneously separates the free gingiva, locally exposing the subgingival preparation margin. Combined with the farthest point preservation stitching algorithm based on the distance from the normal vector and high-speed laser scanning photography, it achieves global preparation edge data and gingival reconstruction, realizing painless, non-invasive, and efficient precise acquisition of the preparation margin. Using this new technique, a patient with a full porcelain crown restoration on a posterior tooth was treated. The digital impression revealed a clear margin of the preparation, and the crown made from this data has a good marginal fit.

To explore the differentially expressed genes (DEGs) related to biosynthesis of active ingredients in wolfberry fruits of different varieties of Lycium barbarum L. and reveal the molecular mechanism of the differences of active ingredients, we utilized Illumina NovaSeq 6000 high-throughput sequencing technology to conduct transcriptome sequencing on the fruits of 'Ningqi No.1' and 'Ningqi No.7' during the green fruit stage, color turning stage and maturity stage. Subsequently, we compared the profiles of related gene expression in the fruits of the two varieties at different development stages. The results showed that a total of 811 818 178 clean reads were obtained, resulting in 121.76 Gb of valid data. There were 2 827, 2 552 and 2 311 DEGs obtained during the green fruit stage, color turning stage and maturity stage of 'Ningqi No. 1' and 'Ningqi No. 7', respectively, among which 2 153, 2 050 and 1 825 genes were annotated in six databases, including gene ontology (GO), Kyoto encyclopedia of genes and genomes (KEGG) and clusters of orthologous groups of proteins (KOG). In GO database, 1 307, 865 and 624 DEGs of green fruit stage, color turning stage and maturity stage were found to be enriched in biological processes, cell components and molecular functions, respectively. In the KEGG database, the DEGs at three developmental stages were mainly concentrated in metabolic pathways, biosynthesis of secondary metabolites and plant-pathogen interaction. In KOG database, 1 775, 1 751 and 1 541 DEGs were annotated at three developmental stages, respectively. Searching the annotated genes against the PubMed database revealed 18, 26 and 24 DEGs related to the synthesis of active ingredients were mined at the green fruit stage, color turning stage and maturity stage, respectively. These genes are involved in carotenoid, flavonoid, terpenoid, alkaloid, vitamin metabolic pathways, etc. Seven DEGs were verified by RT-qPCR, which showed consistent results with transcriptome sequencing. This study provides preliminary evidences for the differences in the content of active ingredients in different Lycium barbarum L. varieties from the transcriptional level. These evidences may facilitate further exploring the key genes for active ingredients biosynthesis in Lycium barbarum L. and analyzing their expression regulation mechanism.
Flavonoids/metabolism* ; Fruit/genetics* ; Gene Expression Profiling/methods* ; Gene Expression Regulation, Plant ; Lycium/metabolism* ; Metabolic Networks and Pathways ; Transcriptome

Objective:To evaluate the clinical survival rates and influence factors of different types of resin-bonded fixed partial dentures (RBFPD) used in anterior missing teeth restoration.Methods:Ninety-three RBFPD were delivered to 92 patients [92 patients,43 males and 49 females, average age (46.1±12.8) years] who visited Peking University School and Hospital of Stomatology from January 2006 to December 2021 for restoration of 1 or 2 anterior missing teeth. Altogether 32 cases of glass fiber reinforced RBFPD, 39 cases of glass-based ceramic RBFPD and 22 cases of porcelain-fused-to-metal RBFPD were retrospectively analyzed. The complete survival rate, functional survival rate, patients′ satisfaction and color matching of the restorations were recorded and evaluated every year since the replacement with RBFPD. The Kaplan-Meier survival curve method was used for survival analysis, and the Log-rank analysis was used to compare the effect of the number of missing teeth, position (maxillary or mandibular), cantilever or non-cantilever and gender on the survival rate of the restorations.Results:The overall survival time for the 93 RBFPD was 13.7 years (95% CI: 12.3-15.1 years). There was a decreasing trend in complete survival and functional survival for all three material RBFPD from year to year, but complete and functional survival rates exceeded 90% at year 5 and exceeded 80% at year 10. The complete survival rate of the glass-ceramic RBFPD was higher than the other two during the follow-up period, with a complete survival rate of 90% (35/39) at year 15. The porcelain-fused-to-metal RBFPD had a higher functional survival rate in years 1-8, but the complete and functional survival rates showed a substantial decrease after year 9. The single-factor Log-rank analysis showed that the success rate of porcelain-fused-to-metal RBFPD was significantly higher than that of glass fiber reinforced RBFPD (χ2=7.33, P=0.007), and the success rate of RBFPD with 1 missing tooth restored was significantly higher than that of RBFPD with 2 missing teeth restored (χ2=3.23, P=0.072). The differences in success rates between different restoration positions (maxillary and mandibular), cantilever or non-cantilever, and gender factors were not statistically significant (χ2=2.26, P=0.133; χ2=0.68, P=0.411; χ2=1.07, P=0.300). Conclusions:For the restoration of individual missing anterior teeth, both porcelain-fused-to-metal RBFPD and glass-based ceramic RBFPD achieve a high long-term clinical success rate, with glass-based ceramic RBFPD being more able to ensure long-term restorative result.

Autoimmune or infectious diseases often instigate the undesirable damages to tissues or organs to trigger immune-related diseases, which involve plenty of immune cells, pathogens and autoantibodies. Nanomedicine has a great potential in modulating immune system. Particularly, biomimetic nanomodulators can be designed for prevention, diagnosis and therapy to achieve a better targeted immunotherapy. With the development of materials science and bioengineering, a wide range of membrane-coated nanomodulators are available. Herein, we summarize recent advancements of bioinspired membrane-coated nanoplatform for systemic protection against immune-related diseases including autoimmune and infectious diseases. We also rethink the challenges or limitations in the progress of the therapeutic nanoplatform, and discuss the further application of the nanomodulators in the view of translational medicine for combating immune-related diseases.

OBJECTIVE：To systematically evaluate the effectiveness and safety of classical prescription versus antihistamines in the treatment of eczema. METHODS ：Retrieved from CBM and CNKI ，randomized controlled trials （RCTs）about classical prescription（trial group ）versus antihistamines （control group ）in the treatment of eczema were collected. The qualities of included literatures were evaluated by modified Jadad scale after literature screening and data extraction ，and Meta-analysis was performed by using Rev Man 5.3 software. RESULTS ：Totally 19 RCTs involving 1 829 patients were included. Meta-analysis showed that total response rate of patients with Shire Yunfu type [OR ＝5.67，95％CI（3.44，9.33），P＜0.000 01]，Pixu Shiyun type [OR ＝4.23， 95％ CI（1.89，9.46），P＝0.000 4]，Xuexu Fengzao type [OR ＝3.57，95％ CI（2.36，5.41），P＜0.000 01] in trial group were significantly higher than that of control group. There were no statistical differences in the incidence of ADR between patients with Shire Yunfu type [OR ＝0.72，95％CI（0.21，2.41），P＝0.59]，Pixu Shiyun type [OR ＝0.31，95％CI（0.01，13.57），P＝0.54]，Xuexu Fengzao type [OR＝1.08，95％ CI（0.18，6.59），P＝0.93] in trial group and control group. After treatment ，the levels of TNF-α [SMD＝－1.67，95％CI（－2.04，－1.31），P＜0.000 01]，IL-6 [SMD＝－1.53，95％CI（－1.88，－1.17），P＜0.000 01] and IL-8 [SMD＝－1.75，95％CI（－2.28，－1.21），P＜0.000 01] in patients with Shire Yunfu type in trial group were significantly lower than control group. There was no statistical significance in CD 4+ levels [SMD ＝1.51，95％CI（－0.37，3.38），P＝0.12] between Shire Yunfu type patients in trial group and control group. CONCLUSIONS ：Therapeutic efficacy of classical prescription in treatment of eczema is better than antihistamines，with similar safety . Modified Longdan xiegan decoction can significantly reduce the levels of inflammatory cytokines in patients with Shire Yunfu type.

OBJECTIVE： To systematically evaluate the efficacy and safety of ticagrelor versus clopidogrel in the treatment of acute coronary syndrome （ACS）. METHODS： Retrieved from PubMed， Embase， Cochrane Library， CBM and CNKI， randomized controlled trials （RCTs） about ticagrelor （trial group） and clopidogrel （control group） in the treatment of ACS were included. After literature screening， data extraction and quality evaluation with modified Jadad scale， Meta-analysis was performed by using Rev Man 5.3 software. RESULTS： 26 RCTs were included， involving 8 560 patients. Meta-analysis showed that the incidence of main adverse cardiac event [RR＝0.47，95％CI（0.38，0.57），P＜0.000 01] and stroke [RR＝0.24，95％CI（0.08，0.69），P＝0.008]， platelet aggregation rate [SMD＝－3.16，95％CI（－4.16，－2.16），P＜0.000 01] and C-reactive protein level [SMD＝－1.02，95％CI（－1.76，－0.29），P＝0.006] in trial group were significantly lower than control group； uric acid level [SMD＝0.64，95％CI（0.39，0.88），P＜0.000 01] of trial group was significantly higher than control group. There was no statistical significance in the incidence of main bleeding event [RR＝0.96，95％CI（0.66，1.40），P＝0.85] or dyspnea [RR＝1.19，95％CI（0.78，1.80），P＝0.42] between 2 groups. CONCLUSIONS： The efficacy and safety of ticagrelor is superior to those of clopidogrel in treatment of ACS， but ticagrelor can cause the elevation of uric acid.

Objective To investigate the diagnostic value of enhanced MR subtracted venography (MRsV)in iliac vein stenosis. Methods 21 patients were recruited for unilateral venous circulation disorders,and they were all performed two kinds of MR venography,including time of flight (TOF)and MRsV.All raw data were reconstructed and maximum intensity proj ection (MIP)images were gained after post-processing in workstation.The image quality and diagnostic accuracy were evaluated by two experienced radiologists.All the results were analyzed,with P<0.05.Results 18 patients were enrolled in our study with good image quality,including 10 cases of unilateral iliac venous thrombosis,1 case of iliac venous stenosis infiltrated by tumor recurrence,3 cases of IVCS and 4 cases without iliac venous thrombosis.The sensitivity and specificity of MRsV-MIP were higher than TOF-MIP (100% vs 92.3%,100% vs 75%,respectively). There was significant difference in diagnostic accuracy between MRsV-MIP and TOF-MIP(χ2=4.827 2,P=0.028 0).Conclusion MRsV demonstrates better image quality and diagnostic performance than TOF in evaluation of iliac vein stenosis.MRsV has greater potential in providing the differential diagnosis evidence in venous stenosis.It could be established as an independent iliac venous imaging method.

BACKGROUND:Intertrochanteric fracture is one of the common fracture, and accompanied by osteoporosis and high energy injury. The fracture line often descended, and induced A3 intertrochanteric fracture. This type of fracture is difficult to treat. Common intramedulary fixation includes proximal femoral nail anti-rotation and InterTan, which have high stability, are minimaly invasive, and have been extensively used. OBJECTIVE: To compare the biomechanical stability of A3 intertrochanteric fracture fixed with proximal femoral nail anti-rotation and InterTan by finite element analysis. METHODS:Three three-dimensional finite element models of the AO3.1, AO3.2 and AO3.3 intertrochanteric fracture fixed with proximal femoral nail anti-rotation and InterTan were established. Fixation was completed according to the requirement of Department of Orthopedics. Stress distribution of femur and fixator of different models was observed. Stress peak at different areas was compared in femur and fixation models. Biomechanical stability was analyzed. RESULTS AND CONCLUSION: The maximum pressure concentration area in AO3.1 intertrochanteric fracture with proximal femoral nail anti-rotation was located in the lateral proximal femur, and with Intertan was located in the medial proximal femur. The AO3.2 had little differences between two types of nails. The AO3.3 intertrochanteric fracture with proximal femoral nail anti-rotation was located in the medial proximal femur and the medial distal implant. There was no significant pressure concentration with InterTan. The von Mises pressure of six models was concentrated in the medial distal implant, and higher maximum von Mises pressure was found in the proximal femoral nail anti-rotation. There was significant difference of von Mises distribution between the lateral and medial implant with proximal femoral nail anti-rotation. Except the AO3.3 intertrochanteric fracture with proximal femoral nail anti-rotation, the maximum pressures of remaining models were located in the main nail and interlocking nail infal. These results concluded that the fracture fixed with InterTan exhibited fine fixation stability in the AO3.1 and AO3.3 intertrochanteric fracture. There was no significant difference of fixation stability between proximal femoral nail anti-rotation and InterTan in AO3.2. The von Mises distribution of InterTan for intertrochanteric fracture is more reasonable.

Aim To explore the changes of Apelin/APJ system in LPS-induced injury of rat pulmonary mi-crovascular endothelial cells( PMVECs) , and the effect and mechanism of Apelin. Methods PMVECs were cultured with the explant technique, and the identifica-tion of rat PMVECs was carried out by immunocyto-chemical staining of factorⅧrelated antigen. MTT as-say was used to evaluate the viability of PMVECs. The mRNA expression of Apelin and APJ was detected by RT-PCR. The protein expression of PCNA and the phosphorylation of Akt was analyzed by Western blot. Results The mRNA expression of Apelin and APJ showed a compensatory increase after LPS treatment for a short period of time ( P<0. 01 ) , but with the exten-sion of time, which was significantly inhibited, even lower than the control group ( P<0. 05 or P<0. 01 ) , suggesting that Apelin/ APJ system might be involved in LPS-induced PMVECs injury. MTT results showed that 10 -6 ~10 -9 mol · L-1 Apelin obviously promoted the proliferation of rat PMVECs ( P <0. 05 or P <0. 01 ) , and with certain concentration and time de-pendence. Moreover, Apelin also improved the LPS-induced PMVECs injury in different degrees ( P<0. 05 or P < 0. 01 ) . In addition, Western blot analysis showed that Apelin significantly reversed the decrease of the protein expression of PCNA and the Akt phos-phorylation level induced by LPS ( P <0. 05 or P <0. 01 ) . Conclusions The Apelin/APJ system is in-volved in LPS-induced PMVECs injury. Apelin plays an important role in protecting the pulmonary microvas-cular endothelial function and reversing the LPS-in-duced PMVECs injury, which might be related to the activation of Akt phosphorylation pathway.