ObjectivePhotoacoustic pump-probe imaging can effectively eliminate the interference of blood background signal in traditional photoacoustic imaging, and realize the imaging of weak phosphorescence molecules and their triplet lifetimes in deep tissues. However, background differential noise in photoacoustic pump-probe imaging often leads to large fitting results of phosphorescent molecule concentration and triplet lifetime. Therefore, this paper proposes a novel triplet lifetime fitting method for photoacoustic pump-probe imaging. By extracting the phase of the triplet differential signal and the background noise, the fitting bias caused by the background noise can be effectively corrected. MethodsThe advantages and feasibility of the proposed algorithm are verified by numerical simulation, phantom and in vivo experiments, respectively. ResultsIn the numerical simulation, under the condition of noise intensity being 10% of the signal amplitude, the new method can optimize the fitting deviation from 48.5% to about 5%, and has a higher exclusion coefficient (0.88>0.79), which greatly improves the fitting accuracy. The high specificity imaging ability of photoacoustic pump imaging for phosphorescent molecules has been demonstrated by phantom experiments. In vivo experiments have verified the feasibility of the new fitting method proposed in this paper for fitting phosphoometric lifetime to monitor oxygen partial pressure content during photodynamic therapy of tumors in nude mice. ConclusionThis work will play an important role in promoting the application of photoacoustic pump-probe imaging in biomedicine.

Purpose: Gold-standard urodynamic examination is widely used in the diagnosis and treatment of lower urinary tract dysfunction. The purpose of urodynamic quality control is to standardize urodynamic examination and ensure its clinical reference value. In our study, we attempted to use a deep learning (DL) algorithm model, mainly for the recognition of typical urodynamic signal, to help physicians complete high-quality urodynamic examinations. Methods: Urodynamic image data from 2 cohorts of adult patients with neurogenic bladder were used: (1) 300 patients with neurogenic bladder in our center from 2012 to 2018 (1,960 images used to train and validate the DL model); and (2) 100 patients with neurogenic bladder from 2020 to 2021 (695 images used to test the performance of the DL model). This resulted in a total of 2,655 images to train, validate and test the DL algorithm to predict the urdynamic signals. Results: Yolov5l had the best detection performance and the highest comprehensive index score (F1, 0.81; mean average precision, 0.83). Our study is a retrospective single-center study, and the generalization ability of the model has not been verified. Conclusions DL algorithms can help operators identify typical urodynamic signals in real time, improve the interpretation and quality of urodynamic examination, and benefit patients.

Purpose: Gold-standard urodynamic examination is widely used in the diagnosis and treatment of lower urinary tract dysfunction. The purpose of urodynamic quality control is to standardize urodynamic examination and ensure its clinical reference value. In our study, we attempted to use a deep learning (DL) algorithm model, mainly for the recognition of typical urodynamic signal, to help physicians complete high-quality urodynamic examinations. Methods: Urodynamic image data from 2 cohorts of adult patients with neurogenic bladder were used: (1) 300 patients with neurogenic bladder in our center from 2012 to 2018 (1,960 images used to train and validate the DL model); and (2) 100 patients with neurogenic bladder from 2020 to 2021 (695 images used to test the performance of the DL model). This resulted in a total of 2,655 images to train, validate and test the DL algorithm to predict the urdynamic signals. Results: Yolov5l had the best detection performance and the highest comprehensive index score (F1, 0.81; mean average precision, 0.83). Our study is a retrospective single-center study, and the generalization ability of the model has not been verified. Conclusions DL algorithms can help operators identify typical urodynamic signals in real time, improve the interpretation and quality of urodynamic examination, and benefit patients.

Purpose: Gold-standard urodynamic examination is widely used in the diagnosis and treatment of lower urinary tract dysfunction. The purpose of urodynamic quality control is to standardize urodynamic examination and ensure its clinical reference value. In our study, we attempted to use a deep learning (DL) algorithm model, mainly for the recognition of typical urodynamic signal, to help physicians complete high-quality urodynamic examinations. Methods: Urodynamic image data from 2 cohorts of adult patients with neurogenic bladder were used: (1) 300 patients with neurogenic bladder in our center from 2012 to 2018 (1,960 images used to train and validate the DL model); and (2) 100 patients with neurogenic bladder from 2020 to 2021 (695 images used to test the performance of the DL model). This resulted in a total of 2,655 images to train, validate and test the DL algorithm to predict the urdynamic signals. Results: Yolov5l had the best detection performance and the highest comprehensive index score (F1, 0.81; mean average precision, 0.83). Our study is a retrospective single-center study, and the generalization ability of the model has not been verified. Conclusions DL algorithms can help operators identify typical urodynamic signals in real time, improve the interpretation and quality of urodynamic examination, and benefit patients.

Umbilical cord mesenchymal stem cells (UC-MSCs) have been widely used in regenerative medicine, but there is limited research on the stability of UC-MSCs formulation during production. This study aims to assess the stability of the cell stock solution and intermediate product throughout the production process, as well as the final product following reconstitution, in order to offer guidance for the manufacturing process and serve as a reference for formulation reconstitution methods. Three batches of cell formulation were produced and stored under low temperature (2-8 ℃) and room temperature (20-26 ℃) during cell stock solution and intermediate product stages. The storage time intervals for cell stock solution were 0, 2, 4, and 6 h, while for intermediate products, the intervals were 0, 1, 2, and 3 h. The evaluation items included visual inspection, viable cell concentration, cell viability, cell surface markers, lymphocyte proliferation inhibition rate, and sterility. Additionally, dilution and culture stability studies were performed after reconstitution of the cell product. The reconstitution diluents included 0.9% sodium chloride injection, 0.9% sodium chloride injection + 1% human serum albumin, and 0.9% sodium chloride injection + 2% human serum albumin, with dilution ratios of 10-fold and 40-fold. The storage time intervals after dilution were 0, 1, 2, 3, and 4 h. The reconstitution culture media included DMEM medium, DMEM + 2% platelet lysate, 0.9% sodium chloride injection, and 0.9% sodium chloride injection + 1% human serum albumin, and the culture duration was 24 h. The evaluation items were viable cell concentration and cell viability. The results showed that the cell stock solution remained stable for up to 6 h under both low temperature (2-8 ℃) and room temperature (20-26 ℃) conditions, while the intermediate product remained stable for up to 3 h under the same conditions. After formulation reconstitution, using sodium chloride injection diluted with 1% or 2% human serum albumin maintained a viability of over 80% within 4 h. It was observed that different dilution factors had an impact on cell viability. After formulation reconstitution, cultivation in medium with 2% platelet lysate resulted in a cell viability of over 80% after 24 h. In conclusion, the stability of cell stock solution within 6 h and intermediate product within 3 h meets the requirements. The addition of 1% or 2% human serum albumin in the reconstitution diluent can better protect the post-reconstitution cell viability.

Objective To explore the computed tomography angiography(CTA)and clinical features of Takayasu's arteritis(TA)with peripheral artery involvement.Methods In this retrospective study,CTA scan was performed in a total of 184 TA patients.TA patients were divided into two groups:60 patients within peripheral artery involvement(peripheral artery involvement group)and 124 patients without peripheral artery involvement(peripheral artery non-involvement group).The difference in comparison of clini-cal data and CTA findings were analyzed.Results A total of 194 peripheral arteries were involved in 60 patients.The most suscep-tible peripheral artery were axillary artery(52,26.8％),middle cerebral artery(26,13.4％)and femoral artery(22,11.3％).In the peripheral artery involvement group,the most common CTA manifestation was luminal stenosis(141,72.7％).The lumen dilata-tion,lumen stenosis with dilatation and wall calcification were not easy to be observed.The age and duration of disease in peripheral artery involvement group were significantly greater than those in peripheral artery non-involvement group(P＜0.05).The proportion of the peripheral artery involvement group in the active phase was significantly lower than that of the peripheral artery non-involvement group(P＜0.05).The incidence of pain in the limbs in peripheral artery involvement group was significantly higher than that in peripheral artery non-involvement group(P＜0.05).The utilization rate of tocilizumab in the peripheral artery involvement group was significantly higher than that in the peripheral artery non-involvement group(P＜0.05).Conclusion TA involving peripheral arteries is more common in patients with a long course of disease and in the inactive phase.Patients are prone to pain in their limbs.The CT A manifestations of these patients are also special,that is,the involved peripheral arteries are not prone to lumen dilatation and wall calcification.

Objective To evaluate the efficacy and safety of brexpiprazole in treating acute schizophrenia.Methods Patients with schizophrenia were randomly divided into treatment group and control group.The treatment group was given brexpiprozole 2-4 mg·d-1 orally and the control group was given aripiprazole 10-20 mg·d-1orally,both were treated for 6 weeks.Clinical efficacy of the two groups,the response rate at endpoint,the changes from baseline to endpoint of Positive and Negative Syndrome Scale(PANSS),Clinical Global Impression-Improvement(CGI-S),Personal and Social Performance scale(PSP),PANSS Positive syndrome subscale,PANSS negative syndrome subscale were compared.The incidence of treatment-related adverse events in two groups were compared.Results There were 184 patients in treatment group and 186 patients in control group.After treatment,the response rates of treatment group and control group were 79.50％(140 cases/184 cases)and 82.40％(150 cases/186 cases),the scores of CGI-I of treatment group and control group were(2.00±1.20)and(1.90±1.01),with no significant difference(all P＞0.05).From baseline to Week 6,the mean change of PANSS total score wese(-30.70±16.96)points in treatment group and(-32.20±17.00)points in control group,with no significant difference(P＞0.05).The changes of CGI-S scores in treatment group and control group were(-2.00±1.27)and(-1.90±1.22)points,PSP scores were(18.80±14.77)and(19.20±14.55)points,PANSS positive syndrome scores were(-10.30±5.93)and(-10.80±5.81)points,PANSS negative syndrome scores were(-6.80±5.98)and(-7.30±5.15)points,with no significant difference(P＞0.05).There was no significant difference in the incidence of treatment-related adverse events between the two group(69.00％vs.64.50％,P＞0.05).Conclusion The non-inferiority of Brexpiprazole to aripiprazole was established,with comparable efficacy and acceptability.

This article elaborates on the complex cross-talk and close relationship between muscles and bones involved in this disease,as well as its pathogenesis.It also summarizes that the difficulty of its treatment lies in the need to simultaneously consider both muscles and bones.And elaborated on the key role of the Hedgehog signaling pathway in embryonic development,tissue morphology establishment,and human tissue regeneration and repair.Investigated the remodeling effect of the Hedgehog signaling pathway on skeletal muscle from three aspects:Proliferation and differentiation of muscle stem cells,precursor cell and muscle fiber generation,inhibition of inflammation,and regulation of immunity;this article elucidates the role of the Hedgehog signaling pathway in bone reconstruction from two aspects.

ObjectiveAngle-closure glaucoma (ACG) is one of the major eye-blinding diseases. To diagnose ACG, it is crucial to examine the anterior chamber angle. Current diagnostic tools include slit lamp gonioscopy, water gonioscopy, ultrasound biomicroscopy (UBM), and anterior segment optical coherence tomography (AS-OCT). Slit lamp and water gonioscopy allow convenient observation of the anterior chamber angle, but pose risks of invasive operation and eye infections. UBM can accurately measure the structure of the anterior chamber angle. However, it is complex to operate and unsuitable for patients, who have undergone trauma or ocular surgery. Although AS-OCT provides detailed images, it is costly. The aim of this study is to explore a non-invasive, non-destructive optical reflection tomography (ORT) technique. This technique can achieve low-cost three-dimensional imaging and full-field anterior chamber angle measurement of the porcine eye. MethodsThe experiment involved assembling an optical reflection tomography system, which included a complementary metal oxide semiconductor (CMOS) camera, a telecentric system, a stepper motor, and a white light source, achieving a spatial resolution of approximately 8.5 μm. The process required positioning the porcine eye at the center of the field of the imaging system and rotating it around its central axis using a stepper motor. Reflection projection images were captured at each angle with an exposure time of 1.0 ms and an interval of 2°. The collected reflection-projection data were processed using a filtered reflection tomography algorithm, generating a series of two-dimensional slice data. These slices essentially represented cross-sectional views of the three-dimensional structural image, and were reconstructed into a complete three-dimensional structural image. Based on the reconstructed three-dimensional structural image of the porcine eye, the anterior chamber angles at different positions were measured, and a distribution map of these angles was drawn. Simultaneously, the ORT measurements were compared with the standard results obtained from optical coherence tomography (OCT) to assess the accuracy of ORT measurements. ResultsIn this study, we successfully obtained the reflection projection data of a porcine eye using ORT technology, reconstructed its three-dimensional structural image, and measured the anterior chamber angle, generating the corresponding distribution map. To better distinguish the different structural parts of porcine eye, the three-dimensional structural image was marked with blue, green, and yellow dashed lines from the outer to the inner layers. The area between the blue and green dashed lines corresponded to the sclera. The area between the green and yellow dashed lines corresponded to the iris. The area inside the yellow dashed line corresponded to the pupil. The three-dimensional structural image clearly revealed the key anatomical features of the porcine eye. It was able to measure the anterior chamber angle at different positions. Additionally, the anterior chamber angle measurements of the porcine eye using ORT were compared with the measurements obtained using a TEL320C1 type OCT system, showing an average deviation of 0.51° and a mean square error MSE of 0.317. ConclusionORT is a non-invasive, non-destructive, low-cost, and high-resolution imaging technique capable of achieving three-dimensional structural imaging and full-field anterior chamber angle measurement of a porcine eye. This technology offers a new perspective for the diagnosis of angle-closure glaucoma and is significant for the screening, diagnosis, and monitoring of eye diseases, potentially benefiting clinics and small hospitals in remote areas in the future.

An integrated evaluation model based on the combination of traditional trait identification and modern chemical analysis was used for the identification of key indexes of grade classification and the establishment of grade quality standard of Lycium barbarum fruits (LBF) from Ningxia genuine producing area. Under the guidance of herbal examination and market survey, particle size, skin color and imperfection were taken as the external trait indicators; focusing on the comprehensiveness and validity of the quality evaluation, 2-O-β-D-glucopyranosyl-L-ascorbic acid (AA-2βG), zeaxanthin dipalmitate (ZD) and volatile ether extractives were used as important parameters involving in quality evaluation in addition to the pharmacopoeia test items and determination indicators such as moisture, ash, water-soluble extractives, Lycium barbarum polysaccharide (LBP) and betaine. The quality differences between different traits and grades of LBF as well as the relevance between character and quality were further investigated by mathematical and statistical means such as t-test analysis, correlation analysis and principal component analysis (PCA). Furthermore, the activities of extractives from different grades of LBF were compared at cellular level. The results showed that LBF were mainly preferred for large and red ones; except for betaine, the other index components were relatively high (moisture and ash were low) in the first-grade and samples with bright-red skin color. Besides, there was a significant correlation between skin color and moisture, water-soluble extractives, LBP, AA-2βG and ZD contents. Considering the results of the study and the market situation, the present study took the grain size and skin color of LBF as the core of evaluation, and at the same time introduced the multi-indicator components including LBP, AA-2βG, ZD, water-soluble extractives and moisture to further guide the grading, and established the quality standard of LBF grades combining the trait indexes and the chemical composition. More importantly, in vitro cell models both preliminarily confirmed that the first-grade LBF played a more significant "nourishing liver and kidney" effect, which provided an experimental basis for the quality control of LBF and promoted the realization of high quality and good price.