ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective: To investigate the clinical efficacy and safety of pudendal nerve modulation (PNM) in the treatment of female pudendal neuralgia (PN)，so as to promote the clinical application of this technique. Methods: A retrospective analysis was conducted on 20 female PN patients who failed conservative treatment at Gongli Hospital during Nov.2020 and Oct.2023.All patients underwent simultaneous PNM and sacral nerve modulation (SNM) with the assistance of 3D printing navigation.Dual-stage test electrodes for PNM and SNM were implanted，followed by alternate therapeutic trial for each modality.Secondary conversion rates and longitudinal outcomes，including visual analogue score (VAS)，patient health questionnaire-9 (PHQ-9)，and quality of life (QoL) scores were compared preoperatively，post-stage Ⅰ，and at 3，6，and 12 months post-stage Ⅱ. Results: All operations were successful.After the trial phase，the secondary conversion rate for PNM was significantly higher than that for SNM; 16 patients (16/20，80%) chose the second-phase PNM implantation surgery，3 (3/20，15%) chose second-phase SNM implantation，and 1 (1/20，5%) had electrodes removed due to ineffective results from both trials.Further assessment revealed that the improvements in VAS，PHQ-9，and QoL scores for PNM patients were significantly better than those for SNM patients after the first phase of surgery and at 3，6 and 12 months after the second-phase conversion (P<0.05).No complications such as electrode migration or infection were observed during the follow-up of 12-15 months. Conclusion: PNM provides more effective relief of pain symptoms and improvements in depressive states for female PN patients compared to SNM.With the assistance of 3D printing navigation，the operation is simple and safe，and offers stable therapeutic effects.It is worthy of clinical promotion and application.

BACKGROUND:The researchers noted that upon embedding clinical-grade catgut and polyglycolide-co-lactide threads in the normal human"Zusanli"(ST 36)acupoint,the local area displayed temporal and inflammatory stimulatory effects,resulting in thread differentiation.However,the underlying mechanism behind thread involvement remains to be studied. OBJECTIVE:To investigate the expression levels of calcitonin gene-related peptide,5-hydroxytryptamine,leukotriene B4,and bradykinin at point"Zusanli"(ST 36)in rats after embedding catgut and polyglycolide-co-lactide respectively at different time points. METHODS:110 male SD rats were divided into a blank group(10 rats),a catgut embedding group(50 rats),and a polyglycolide-co-lactide embedding group(50 rats)according to the random number table method.In the blank group,no thread was embedded.In catgut embedding group and the polyglycolide-co-lactide embedding group,the thread was embedded in the left side of the ST36 acupoint once.Tissue was collected from the left side of the ST36 acupoint area 8 hours,3,7,14,and 21 days after embedding.The expression levels of calcitonin gene-related peptide and 5-hydroxytryptamine were detected by immunohistochemistry,and the contents of leukotriene B4 and bradykinin were detected by ELISA. RESULTS AND CONCLUSION:(1)Compared with the blank group,the expression of calcitonin gene-related peptide,5-hydroxytryptamine,bradykinin,and leukotriene B4 was significantly increased in the 8 hours,3,7,14,and 21 days of the catgut embedding group(P<0.05);calcitonin gene-related peptide expression was significantly increased in 8 hours,3,7,and 14 days in the polyglycolide-co-lactide embedding group(P<0.05);the expression of bradykinin was significantly increased in 8 hours,3,and 7 days(P<0.05);the expression of leukotriene B4 was significantly increased at 8 hours,3,7,14,and 21 days(P<0.05).(2)Compared with the polyglycolide-co-lactide embedding group,the expression of calcitonin gene-related peptide was increased at 7,14,21 days after thread embedding(P<0.05),and the expression of 5-hydroxytryptamine was increased at 8 hours,3,7,14 and 21 days after thread embedding(P<0.05);contents of leukotriene B4 and bradykinin in tissues were increased at 8 hours,3,14 and 21 days after embedding(P<0.05)in the catgut embedding group.(3)The results show that calcitonin gene-related peptide,5-hydroxytryptamine,leukotriene B4,and bradykinin in the acupoint region alter after catgut embedding in the ST36 of rats,as well as the alteration of calcitonin gene-related peptide,leukotriene B4,and bradykinin is found in the acupoint region after polyglycolide-co-lactide embedding in rats,which may be one of the mechanisms involved in the local time sensitive stimulus effects caused by embedding threads at acupoints.Moreover,there is a discernible difference between the two thread types.

ObjectiveTo study the effect of Qizhu Kang'ai prescription （QZAP） on the gluconeogenesis enzyme phosphoenolpyruvate carboxykinase 1 （PCK1） in the liver of mouse model of liver cancer induced by diethylnitrosamine （DEN） combined with carbon tetrachloride （CCl₄） and Huh7 cells of human liver cancer， so as to explore the mechanism on regulating metabolic reprogramming and inhibiting cell proliferation of liver cancer cells. MethodDEN combined with CCl₄ was used to construct a mouse model of liver cancer via intraperitoneal injection. A normal group， a model group， and a QZAP group were set up， in which QZAP （3.51 g·kg^-1） or an equal volume of normal saline was administered daily by gavage， respectively. Serum and liver samples were collected after eight weeks of intervention. Serum alanine aminotransferase （ALT）， aspartate aminotransferase （AST）， γ-glutamyltransferase （γ-GT）， and alpha-fetoprotein （AFP） in mice were detected to evaluate liver function changes of mice in each group. Hematoxylin-eosin （HE） staining and Sirius red staining were used to observe pathological changes in liver tissue. In the cell experiment， Huh7 cells were divided into blank group， QZAP low， medium， and high dose groups and/or PCK1 inhibitor （SKF-34288 hydrochloride） group， and Sorafenib group. The corresponding drug-containing serum and drug treatment were given， respectively. Cell counting kit-8 （CCK-8） method， colony formation experiment， Edu fluorescent labeling detection， intracellular adenosine triphosphate （ATP） content detection， and cell cycle flow cytometry detection were used to evaluate the proliferation ability， energy metabolism changes， and change in the cell cycle of Huh7 cells in each group. Western blot was used to detect the protein expression levels of PCK1， serine/threonine kinase （Akt）， phosphorylated Akt （p-Akt）， and cell cycle-dependent protein kinase inhibitor 1A （p21）. ResultCompared with the model group， the pathological changes such as cell atypia， necrosis， and collagen fiber deposition in liver cancer tissue of mice in the QZAP group were alleviated， and the number of liver tumors was reduced （P<0.01）. The serum ALT， AST， γ-GT， and AFP levels were reduced （P<0.01）. At the cell level， compared with the blank group， low， medium， and high-dose groups of QZAP-containing serum and the Sorafenib group could significantly reduce the survival rate of Huh7 cells （P<0.01） and the number of positive cells with Edu labeling （P<0.01） and inhibit clonal proliferation ability （P<0.01）. The QZAP groups could also reduce the intracellular ATP content （P<0.05） and increase the distribution ratio of the G₀/G₁ phase of the cell cycle （P<0.05） in a dose-dependent manner. Compared with the model group and blank group， PCK1 and p21 protein levels of mouse liver cancer tissue and Huh7 cells in the QZAP groups were significantly reduced （P<0.05，P<0.01）， and the p-Akt protein level was significantly increased （P<0.01）. Compared with the blank group， the ATP content and cell survival rate of Huh7 cells in the SKF-34288 hydrochloride group were significantly increased （P<0.05）， but there was no statistical difference in the ratio of Edu-positive cells and the proportion of G₀/G₁ phase distribution. Compared with the SKF-34288 hydrochloride group， the QZAP combined with the SKF-34288 hydrochloride group significantly reduced the ATP content， cell survival rate， and Edu-positive cell ratio of Huh7 cells （P<0.05） and significantly increased the G₀/G₁ phase distribution proportion （P<0.05）. ConclusionQZAP may induce the metabolic reprogramming of liver cancer cells by activating PCK1 to promote Akt/p21-mediated tumor suppression， thereby exerting an anti-hepatocellular carcinoma proliferation mechanism.

Objective To investigate the renal protective effect and mechanism of sodium acetate(Ace)on hyperuricemic nephropathy(HN)in mice.Methods Uric acid nephropathy mice model was prepared by intraperitoneal injection of potassium oxonate combined with adenine gavage.Mice were divided into blank control group(0.9％NaCl+0.5％carboxymethyl cellulose sodium),Ace group(200 mmol·L-1 Ace+0.5％carboxymethyl cellulose sodium),model group(0.9％NaCl+350 mg·kg-1 potassium oxonate+70 mg·kg-1 adenine),and experimental group(based on model group with additional 200 mmol·L-1 Ace).Serum and urine uric acid(UA)and serum creatinine(SCr)levels were observed in each group.Real-time fluorescence quantitative reverse transcription-polymerase chain reaction(qRT-PCR)was used to detect the expression levels of kidney injury molecule-1(Kim-1)and anti-aging gene Klotho,renal fibrosis markers Collagen Ⅰ and Fibronectin,intestinal inflammation-related factors interleukin-1 β(IL-1 β),and mRNA expression levels of tight junction proteins Zo-1.Results The serum UA levels of blank control group,Ace group,model group,and experimental group mice were(259.52±24.40),(227.71±35.91),(604.06±73.55),and(496.24±30.16)μmol·L-1,respectively;SCr levels were(16.85±0.40),(16.18±0.94),(22.38±1.56),and(19.78±1.43)μmol·L-1;Kim-1 mRNA relative expression levels were 1.04±0.25,1.17±0.28,13.00±2.87,and 4.24±3.92;Klotho mRNA relative expression levels were 1.04±0.15,1.02±0.18,0.43±0.12,and 0.69±0.12;Collagen Ⅰ mRNA relative expression levels were 1.05±0.15,1.02±0.18,3.19±1.09,and 1.61±0.55;Fibronectin mRNA relative expression levels were 1.07±0.18,1.02±0.25,7.86±2.40,and 3.34±2.10;intestinal IL-1β mRNA relative expression levels were 1.00±0.01,1.01±0.03,2.55±0.63,and 1.21±0.28;intestinal Zo-1 mRNA relative expression levels were 1.00±0.07,1.07±0.09,0.54±0.20,and 0.92±0.17.The above indicators in blank control group compared with model group,and experimental group compared with model group,all showed statistically significant differences(P＜0.05,P＜0.01,P＜0.001).Conclusion Sodium acetate can effectively reduce UA levels in HN mice,significantly improve renal injury and fibrosis,and its mechanism may be related to the improvement of intestinal inflammatory response and up-regulation of intestinal Zo-1/Occuludin pathway to reduce intestinal mucosal permeability.

Immmunosuppressants are mainly used to reduce rejection after solid organ transplantation,so as to improve the success rate of organ transplantation.However,long-term use of immunosuppressants can also serious-ly impair the immune function of patients,thereby increasing the risk of viral infection and postoperative complica-tions,leading to transplant failure.Therefore,patients need to use both immunosuppressants and antiviral agents.If some immunosuppressants with antiviral effects are found,the patient's burden of taking medicines will be greatly reduced.Currently,the immunosuppressants with antiviral effect have been focused by researchers.The gradual re-vealing of the antiviral mechanism of these immunosuppressants will help to optimize the treatment plan of postope-rative rehabilitation of organ transplant recipients.Based on the mechanism of rejection of transplanted organ,this paper systematically describes the types of viruses which closely related to infection of organ transplant patients and the molecular mechanism of some immunosuppressants in antiviral aspects,which further provides a new idea for clinical prevention and treatment of viral infection due to organ transplantation.

Objective To investigate the value of interleukin-6(IL-6),procalcitonin(PCT)and immuno-globulin G(IgG)in evaluating the susceptibility and recurrence of bacterial pneumonia in children with hor-mone-sensitive primary nephrotic syndrome(PNS).Methods A total of 150 children with hormone-sensitive PNS admitted to the hospital from January 2019 to March 2023 were selected as the study objects.The pa-tients were divided into concurrent group and non-concurrent group according to whether bacterial pneumonia was complicated or not within 3 months.The baseline IL-6,PCT and IgG levels of the two groups were com-pared,and the factors affecting susceptibility to bacterial pneumonia were analyzed by Logistic regression.Re-ceiver operating characteristic curve(ROC)was drawn to analyze the value of IL-6,PCT and IgG in assessing susceptibility to PNS bacterial pneumonia and the risk of PNS recurrence.Results IL-6[(7.84±2.49)pg/mL]and PCT[(0.39±0.11)ng/mL]in concurrent group were higher than those in non-concurrent group[(4.75±1.56)pg/mL,(0.29±0.09)ng/mL].IgG[(3.82±1.25)g/L]was lower than that of non-concurrent group[(5.92±1.97)g/L],and the differences were statistically significant(P＜0.05).Logistic regression e-quation showed that with the increase of IL-6 and PCT and the decrease of IgG,the susceptibility to bacterial pneumonia gradually increased,and the difference was statistically significant(P＜0.05).The AUC of IL-6,PCT and IgG for PNS bacterial pneumonia susceptibility was 0.792,0.744 and 0.677,respectively.The AUC of IL-6 and PCT combined IgG for PNS bacterial pneumonia susceptibility was 0.929,which was higher than that of IL-6,PCT and IgG alone(P＜0.05).The risk of PNS recurrence in patients with high IL-6 level was 7.054 times that of low IL-6 level,the risk of PNS recurrence in patients with high PCT level was 6.750 times that of low PCT level,and the risk of PNS recurrence in patients with high IgG level was 0.079 times that of low level,the differences were statistically significant(P＜0.05).Conclusion IL-6,PCT and IgG are the influencing factors of hormone-sensitive PNS bacterial pneumonia in children,and they are related to the recurrence of PNS.Clinically,IL-6,PCT and IgG levels can be used to evaluate the susceptibility and recur-rence risk of bacterial pneumonia in children,so as to provide guidance for preventive clinical intervention.