BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective To retrospectively investigate the efficacy of pelvic floor muscle training(PFMT)using APP-based home device in the real-world scenario.Methods A retrospective survey was conducted among 171 000 Chinese female users over 18 years old who freely registered APP and performed PFMT using a domestic manufactured home device from Oct 1,2019 to Mar 31,2021.The Patient Global Impression of Improvement(PGI-I)questionnaires concerning pelvic floor general condition,sexual satisfaction and other three major symptoms related to pelvic floor muscle laxity such as stress urinary incontinence(SUI),pelvic organ prolapse(POP),and vaginal laxity(VL)were broadcast public online for users to self-assess the improvement.The vaginal muscle strength values prior and post training recorded by APP were also reported.All data were collected anonymously for further stratified analysis.Results A total of 984 valid questionnaires were collected by systematic sampling.The PGI-I scores of pelvic floor general condition(P=0.000 1),sexual satisfaction(P=0.009),SUI(P=0.000 1),POP(P=0.044)and VL(P=0.034)were statistically significant in users who reported to use the device for 3 months or more compared with those less than 3 months.In addition,the increase of vaginal muscle strength was related to the improvement of PGI-I scores in SUI and POP with statistical significance.There were no significant difference in subgroups such as age,education,parity,and delivery mode.Conclusion The subjective benefit of pelvic floor function-related symptoms and the improvement of vaginal muscle strength could be observed after PFMT for three months or more using APP-based home device in Chinese women in the real-world scenario.

BACKGROUND:Bone tissue defects are one of the most common diseases in orthopedics,and the current treatments for this disease are inadequate.The development of tissue engineering brings new hope for bone defect repair:by regulating the release of bioactive substances and the process of vascularization and neurogenesis at the defect site,it can effectively improve the microenvironment of bone tissue and promote osseointegration,which is the most promising research idea for large-size bone defect repair. OBJECTIVE:To explore the research progress of regulating bone microenvironment changes in bone defect repair in recent years from the effects of bioactive substances,vascularization and neurotization on three aspects of bone microenvironment changes,and to provide new ideas and strategies for the treatment of large-size bone defects. METHODS:The search terms"bone tissue engineering,angiogenesis,neurotization,cytokines,bone morphogenetic protein,vascular endothelial growth factor,neuropeptides,bone microenvironment"in Chinese and English were used to search for articles on the influence of changes in the bone microenvironment and their application in bone tissue engineering published from January 1,2001 to December 31,2022 on CNKI,WanFang,Web of Science,Science Direct,and PubMed.Finally,109 articles were included for review. RESULTS AND CONCLUSION:(1)The bone microenvironment is essential for the induction of bone tissue stem cell growth and differentiation,and mainly consists of the extracellular matrix of the bone tissue seeds and the biochemical factors required for intercellular interactions,the local blood circulation network and the surrounding nerve tissue.(2)Bone defect repair is a continuous process divided into multiple phases that overlap and are mediated by multiple cytokines,and the same cytokine can have mutually synergistic or antagonistic effects in one or more healing phases.(3)Neovascular regeneration is key to initiating bone repair,as neovascularisation not only provides essential nutrients,osteoblasts and growth factors for bone repair,but is also a gateway for repair cells to enter the injury zone.(4)In addition to regulating the type,dose and timeliness of vascular-inducing factor release to achieve blood transport reconstruction.The study of differential release delivery systems of multiple factors and the application of gene transfer technology will be the future research direction to solve large bone defects.(5)Neuropeptides can bind to relevant receptors and act on specific signaling pathways to guide vascular growth and influence bone healing,bone regeneration and the balance between osteogenesis and osteolysis through a variety of pathways.(6)In the establishment of neuralized tissue-engineered bone,the role of changes in the bone tissue microenvironment and neuromodulation is bidirectional.Cytokines in the bone matrix can participate in neuronal signaling pathways through the blood-nerve barrier.Neuropeptides secreted by glial cells act on the bone microenvironment,affecting bone healing,bone regeneration and the balance between osteogenesis and osteolysis.(7)There are still many questions regarding the regulation of the bone microenvironment by bioactive substances and the processes of vascularization and neurogenesis,such as the rapid diffusion and degradation of cytokines in the body and their loss of activity,the temporal and spatial distribution of angiogenesis-related growth factors,and the establishment of neurogenesis through the body's feedback regulatory mechanism,which need to be improved by subsequent studies.

BACKGROUND:Hyperuricemia is a common metabolic disease,and the main clinical manifestation of patients with hyperuricemia is the formation of uric acid crystals leading to gout.Previous studies have only reported that uric acid crystals lead to intervertebral disc degeneration,but there are fewer studies on the correlation between hyperuricemia and intervertebral disc degeneration. OBJECTIVE:To retrospectively analyze the characteristics of intervertebral disc degeneration in patients with hyperuricemia and the correlation between serum uric acid level and intervertebral disc degeneration. METHODS:A retrospective analysis was performed in all patients diagnosed with intervertebral disc degeneration admitted at the Department of Orthopedics,the Affiliated Hospital of Southwest Medical University from January 2021 to December 2022.There were 97 hyperuricemia patients in the hyperuricemia group and 194 non-hyperuricemia patients in the control group according to sex and age in a ratio of 1:2.Blood uric acid test results were collected,and Pfirrmann scoring was performed for the degree of disc degeneration in patients based on the whole spinal MRI images.The difference in the degree of disc degeneration between the two groups was compared,and the correlation between the serum uric acid level and the degree of intervertebral disc degeneration was analyzed. RESULTS AND CONCLUSION:The Pfirrmann score in the hyperuricemia group was higher than that in the control group,and the total number of disc degeneration in the hyperuricemia group was also significantly higher than that in the control group(P<0.05).Spearman correlation analysis showed that the degree of disc degeneration in male patients was positively correlated with serum uric acid level at many spinal segments in the hyperuricemia group(C3/4:r=0.317,C4/5:r=0.333,C5/6:r=0.309,L2/3:r=0.443,P<0.05);the degree of disc degeneration in female patients was also positively correlated with serum uric acid level(C3/4:r=0.354,C4/5:r=0.388,C6/7:r=0.312,T7/8:r=0.282,T9/10:r=0.305,T11/12:r=0.277,L4/5:r=0.319,L5-S1:r=0.367,P<0.05).In the control group,there was no significant correlation between the degree of disc degeneration and serum uric acid level in male and female patients(P>0.05).To conclude,in patients with hyperuricemia,the higher serum uric acid level indicates the more serious intervertebral disc degeneration.Therefore,hyperuricemia is one of the risk factors for intervertebral disc degeneration.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.