BACKGROUND:Spinal canal decompression using uniportal endoscopic surgery is a new minimally invasive surgery in the treatment of lumbar spinal stenosis.However,this technique needs a steep learning curve and high requirements for surgical equipment and instruments,which limits its clinical application.We previously use the spinal endoscopy as a monitoring endoscopy and combined with unilateral biportal endoscopy to propose a hybrid technique of spinal endoscopy to achieve coaxial endoscopic operation and hands-separate operation. OBJECTIVE:To compare the clinical outcome of hybrid technique and uniportal endoscopic surgery in treatment of lumbar spinal stenosis with bilateral lower limb pain symptoms. METHODS:Ninety patients diagnosed of lumbar spinal stenosis with bilateral symptoms were included and retrospectively analyzed at First People's Hospital,Shanghai Jiao Tong University from August 2020 to August 2022.44 cases were included in group A(hybrid technique group),while 46 cases were included in group B(uniportal endoscopic surgery).The nerve decompression was observed during the surgery.Operation time,hospital stay time,and expenses were recorded in both groups.The visual analog scale scores of lower back pain and both lower extremities pain,Oswestry disability index scores of quality of life and excellent and good rate of modified Macnab criteria were recorded and compared at preoperative,postoperative 3 days,and postoperative 3 and 6 months. RESULTS AND CONCLUSION:(1)The operation time of group A was significantly shorter than that of group B(P<0.05).(2)The lower back pain and lower extremity pain of the severe side at postoperative 3 days,and 3 and 6 months were significantly relieved in both groups(P<0.05).The visual analog scale score of lower extremity pain on the mild side was significantly decreased at postoperative 3 days,3 and 6 months than preoperative score in the group A(P<0.05).The visual analog scale score of lower extremity pain on the mild side was significantly decreased at postoperative 3 days than preoperative score in the group B(P<0.05).The visual analog scale scores of lower extremity pain on the mild side at postoperative 3 and 6 months did not show significant difference than preoperative score in the group B.The comparison between the two groups showed that there was no significant difference in the visual analog scale scores of postoperative lower back pain and lower extremity pain of the severe side(P>0.05).The visual analog scale scores of lower extremity pain on the mild side in the group A were significantly lower than those of group B at postoperative 3 and 6 months(P<0.05).(3)The Oswestry disability index scores of both groups at postoperative 3 day were significantly lower than preoperative score(P<0.05),and there was no significant difference between the two groups 3 days after operation.Oswestry disability index scores of group A at postoperative 3 and 6 months were significantly decreased than preoperative score(P<0.05).The Oswestry disability index scores of group B at postoperative 3 and 6 months did not show significant differences than preoperative score(P>0.05).The comparison between the two groups showed the Oswestry disability index scores of group A were significantly lower than group B at postoperative 3 and 6 months(P<0.05).(4)The results of modified Macnab showed that the excellent and good rate of group A was significantly higher than that of group B(95%,78%,P<0.05).(5)It is indicated that the hybrid technique is a new spinal endoscopy technique,which has the advantages of less trauma and faster recovery as a minimally invasive surgery.The clinical outcome of hybrid technique is superior to that of uniportal endoscopic surgery in the treatment of lumbar spinal stenosis with bilateral symptoms.Additionally,it also has the advantages of good operational flexibility and high decompression efficiency as an open surgery.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

Objective To investigate the screening results and factors affecting abnormal detection rates among high-risk groups of esophageal cancer and to explore effective intervention measures. Methods We investigated and collected the information on gender, education level, age, marital status, symptoms of reflux esophagitis (heartburn, acid reflux, belching, hiccup, foreign body sensation in the pharynx, and difficulty swallowing), consumption of pickled vegetables, salt use, and esophageal cancer incidence of villagers in a natural village in Wenfeng District, Anyang City, Henan Province. Changes in reflux esophagitis symptoms in the high-incidence area of esophageal cancer before and after 16 years were observed, and the relationship of such changes with esophageal cancer was analyzed. Results In 2008, 711 cases were epidemiologically investigated, including 213 cases with one of the symptoms of reflux esophagitis such as heartburn, acid reflux, belching, hiccups, foreign body sensation in the pharynx, and difficulty swallowing (sorted in accordance with the abovementioned symptoms; if there are multiple symptoms, then the former is taken); 55 cases with at least two related symptoms, among which the most symptom was heartburn in 108 cases (15.1%); followed by acid reflux, belching, etc. In 2024, the same group of people was investigated, and eight people were missing because of relocation. A total of 703 people were successfully investigated, of which 189 cases (26.8%) had one of the symptoms of reflux esophagitis, such as heartburn (sorted in accordance with relevant symptoms, if there are multiple symptoms, then the former will be selected); 167 cases (23.7%) had at least two related symptoms, among which the most symptom was heartburn in 139 cases (19.7%); followed by acid reflux. Over 16 years, among the 703 people investigated, 45 cases had esophageal cancer and they had one or more of the abovementioned symptoms. No significant differences in the reflux esophagitis-like symptoms were found between 2008 and 2024 (P=0.26); no significant differences in the composition of reflux esophagitis-like symptoms were found between 2008 and 2024 (P=0.299). Conclusion The detection rate of reflux esophagitis-related symptoms in the population in a high-risk area of esophageal cancer has not decreased in the past 16 years, and the high-risk factors still exist. Esophageal cancer is closely related to reflux esophagitis, and clinical practice can provide early diagnosis and treatment for high-risk population.

Umbilical cord mesenchymal stem cells (UC-MSCs) have been widely used in regenerative medicine, but there is limited research on the stability of UC-MSCs formulation during production. This study aims to assess the stability of the cell stock solution and intermediate product throughout the production process, as well as the final product following reconstitution, in order to offer guidance for the manufacturing process and serve as a reference for formulation reconstitution methods. Three batches of cell formulation were produced and stored under low temperature (2-8 ℃) and room temperature (20-26 ℃) during cell stock solution and intermediate product stages. The storage time intervals for cell stock solution were 0, 2, 4, and 6 h, while for intermediate products, the intervals were 0, 1, 2, and 3 h. The evaluation items included visual inspection, viable cell concentration, cell viability, cell surface markers, lymphocyte proliferation inhibition rate, and sterility. Additionally, dilution and culture stability studies were performed after reconstitution of the cell product. The reconstitution diluents included 0.9% sodium chloride injection, 0.9% sodium chloride injection + 1% human serum albumin, and 0.9% sodium chloride injection + 2% human serum albumin, with dilution ratios of 10-fold and 40-fold. The storage time intervals after dilution were 0, 1, 2, 3, and 4 h. The reconstitution culture media included DMEM medium, DMEM + 2% platelet lysate, 0.9% sodium chloride injection, and 0.9% sodium chloride injection + 1% human serum albumin, and the culture duration was 24 h. The evaluation items were viable cell concentration and cell viability. The results showed that the cell stock solution remained stable for up to 6 h under both low temperature (2-8 ℃) and room temperature (20-26 ℃) conditions, while the intermediate product remained stable for up to 3 h under the same conditions. After formulation reconstitution, using sodium chloride injection diluted with 1% or 2% human serum albumin maintained a viability of over 80% within 4 h. It was observed that different dilution factors had an impact on cell viability. After formulation reconstitution, cultivation in medium with 2% platelet lysate resulted in a cell viability of over 80% after 24 h. In conclusion, the stability of cell stock solution within 6 h and intermediate product within 3 h meets the requirements. The addition of 1% or 2% human serum albumin in the reconstitution diluent can better protect the post-reconstitution cell viability.

Fever of unknown origin(FUO)is a difficulty in clinical diagnosis and treatment.Patients with FUO come to seek medical consultation usually with fever as the main complaint,and the accompanying symptoms and signs are generally atypical.The pathogenesis of FUO remains conflicting in the field of modern western medicine,and its treatment is still focused on empirical anti-inflammatory management,which has the deficiency of delayed diagnosis,limited therapeutic options,poor therapeutic effects,and obvious adverse reactions.In the field of traditional Chinese medicine(TCM),FUO generally results from the dysfunction of zang-fu organs and the imbalance of yin and yang,and has the clinical features of long duration of illness,unknown etiology,complexity of illness,recurrent attacks,and difficult to be cured.Based on the six-meridian syndrome differentiation,Chief Physician LI Chuang-Peng pointed out that the pathogenesis of FUO is characterized by the combined disease of shaoyin and yangming,and put forward the therapeutic principle of warming shaoyin and unblocking yangming.He proposed the use of Dahuang Fuzi Decoction(mainly composed of Rhei Radix et Rhizoma and Aconiti Lateralis Radix Praeparata)plus Yiyi Fuzi Baijiang Powder(mainly composed of Coicis Semen,Aconiti Lateralis Radix Praeparata and Patriniae Herba)to subside fever and eliminate pathogen,together with Asari Radix et Rhizoma for guiding the medicine directly to the shaoyin.Moreover,therapies of strengthening and activating spleen and stomach,nourishing yin to produce fluid,and unblocking the blood vessels can be used for eliminating the pathogen and supporting the healthy qi.

BACKGROUND:Electrical stimulation is a physical method that can be used to induce various cellular activities such as cell proliferation,differentiation,and apoptosis.The induction of osteogenic differentiation of stem cells will be beneficial in the field of bone regeneration. OBJECTIVE:To observe whether micro-current field can promote the proliferation and osteogenic differentiation of human umbilical cord mesenchymal stem cells. METHODS:The fresh human umbilical cord tissue was cut to obtain umbilical cord mesenchymal stem cells,which were inoculated into a 6-well plate after cell culture and passage to the third generation.After 24 hours,the cells were cultured under a stimulation of 0,50,and 100 mV/mm micro-electric field,at a frequency of 1 hour per day for 3 continuous days.The growth and morphological changes of human umbilical cord mesenchymal stem cells were observed by a microscope.The cell proliferation was detected by CCK-8 assay and EdU staining.Alizarin red staining was used to detect the osteogenic differentiation ability of cells.Western blot assay was used to determine the expression of ERK signal pathway proteins. RESULTS AND CONCLUSION:(1)The optical density value and the number of proliferating cells in 50 and 100 mV/mm groups were significantly higher than those of the unstimulated group(P<0.05).(2)Human umbilical cord mesenchymal stem cells could be induced to differentiate into osteocytes before and after micro-electric field stimulation,but the differentiation rate of 50 and 100 mV/mm groups was faster than that of unstimulated groups.(3)The protein expression of p-ERK1/2 in the 50 and 100 mV/mm groups was higher than that in the unstimulated group,and significant difference was detected between the 100 mV/mm group and the unstimulated group(P<0.05).(4)Micro-electric field can promote the proliferation of human umbilical cord mesenchymal stem cells,and the mechanism may be achieved by promoting the phosphorylation of ERK.

As an emerging discipline that combines traditional diagnostic methods with modern scientific technology,micro syndrome differentiation has good prospects for development,but there are some controversies in the research process.Based on ancient and modern literature,this article reviewed the origin and flow of research on micro syndrome differentiation,and summarized the problems to be improved in the process of research on micro syndrome differentiation from three aspects:application of disease type,guiding ideology and micro indicators.Based on this,the article further expounded the new thinking on"near-micro"syndrome differentiation from three aspects:connotation,scope of application,and links to traditional identification and micro-identification,and pointed out that the modern medical detection basis should be incorporated into the field of TCM syndrome differentiation,and at the same time,it should be based on the overall thinking mode of TCM,which would provide a new idea for the development of modern TCM diagnosis technology.

Objective:To explore the application value of optical surface monitoring system (OSMS) volume rendering technique (VRT) body surface imaging in intensity-modulated radiotherapy for thoracic tumors.Methods:A retrospective case series study was performed. The clinical data of 65 patients with thoracic tumors treated with intensity-modulated radiotherapy at Tongji Hospital Affiliated to Tongji Medical College of Huazhong University of Science and Technology from September 2021 to October 2022 were retrospectively analyzed. In the first treatment,after cone-beam computed tomography (CBCT) scan and correction, VRT body surface images were obtained by using OSMS. In subsequent treatment, the VRT image was used as the benchmark and the 6-dimensional bed was automatically positioned to record the 6-dimensional bed positioning value. The CBCT scan was performed to record the translation and rotation errors of left-right direction (X-axis), head-foot direction (Y-axis) and front-rear direction (Z-axis). After the calibration of the 6-dimensional automatic bed shifting, the new real-time deltas (RTD) value of digital imaging and communications in medicine (DICOM) body surface image was recorded, and the new VRT image was obtained. CBCT registration error value was defined as VRT image-guided setup error. The sum of CBCT registration error value and moving bed movement value was defined as the body surface marker line-guided setup error. The sum of CBCT registration error value and the recorded DICOM image RTD value was defined as the theoretical error of DICOM image-guided setup. The advantages and disadvantages of VRT image, body surface marker line and DICOM image-guided setup were compared and analyzed.Results:There were 42 males and 23 females in 65 patients with thoracic tumors, and the age [ M ( Q1, Q3)] was 58 years (51 years, 64 years). The linear errors [ M ( Q1, Q3)] of VRT image-guided setup in X, Y and Z axes were 0.6 mm (0.3 mm, 1.2 mm), 1.2 mm (0.5 mm, 2.4 mm) and 1.1 mm (0.5 mm, 1.9 mm); and the rotational errors were 0.4° (0.1°, 0.7°), 0.4° (0.1°, 0.6°) and 0.4° (0.2°, 0.6°). The linear errors of the marker line-guided setup were 1.6 mm (0.9 mm, 2.6 mm), 2.2 mm (1.1 mm, 3.8 mm) and 1.0 mm (0.4 mm, 1.8 mm); and the rotational errors were 0.7° (0.3°, 1.2°), 0.5° (0.2°, 0.8°) and 0.5° (0.2°, 0.8°). The linear errors of the DICOM image-guided positioning were 1.1 mm (0.6 mm, 1.9 mm), 2.1 mm (1.0 mm, 3.4 mm) and 1.3 mm (0.6 mm, 3.1 mm), and the rotational errors were 0.6° (0.2°, 1.1°), 0.7° (0.3°, 1.1°), 0.7° (0.2°, 1.1°). Compared with the marker line-guided setup, except for Z-axis linear error ( P = 0.218), the VRT-guided setup errors were low (all P < 0.001). Compared with the DICOM imaging-guided setup, the VRT image-guided setup linear error and rotational error in X-, Y- and Z-axis were low (all P < 0.01). Conclusions:VRT image-guided setup is superior to traditional body surface marker setup and DICOM imaging setup; OSMS VRT body surface imaging can effectively improve the setup accuracy and stability of intensity-modulated radiotherapy for thoracic tumors, and reduce the setup errors.

Objective To evaluate the applicability of the comprehensive index method for assessing occupational health risks on chemical hazards in key work sites of a metal product enterprise. Methods A metal product enterprise in Beijing City was chosen as the research subject using the convenience sampling method. Occupational health investigations and chemical hazard monitoring were conducted at four work sites: grinding machine operation, welding, cutting, and painting. The comprehensive index method was used to determine the risk levels of chemical hazards. Results The grinding dust in the grinding machine operation work site was assessed as moderate risk. The nitrogen oxides and ozone in the welding (southeast) work sites were assessed as moderate risk. The nitrogen oxides ozone and welding fumes in the welding (northwest) and cutting work site were assessed as moderate risk. Benzene in the painting work site was assessed as moderate risk. All chemical hazards in other work sites were determined to pose low risks. Co-exposures to nitrogen oxides and ozone in the two welding work sites and cutting work site were classified as moderate risk. Co-exposure to ethylbenzene, xylene, methanol, ethyl acetate, and butyl acetate in the painting work site also posed moderate risk, while the co-exposure to toluene and methanol in the painting work site was assessed as low risk. Conclusion The comprehensive index method could be used for the occupational health risk assessment in the metal product enterprise. The enterprise should strengthen hazard control measures for exposure to grinding dust, welding fumes, nitrogen oxides, ozone, and benzene, and closely monitor the health risks associated with co-exposures of chemical hazards.