Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Neuroscience is a significant frontier discipline within the natural sciences and has become an important interdisciplinary frontier scientific field. Brain is one of the most complex organs in the human body, and its structural and functional analysis is considered the “ultimate frontier” of human self-awareness and exploration of nature. Driven by the strategic layout of “China Brain Project”, Chinese scientists have conducted systematic research focusing on “understanding the brain, simulating the brain, and protecting the brain”. They have made breakthrough progress in areas such as the principles of brain cognition, mechanisms and interventions for brain diseases, brain-like computation, and applications of brain-machine intelligence technology, aiming to enhance brain health through biomedical technology and improve the quality of human life. Due to limited understanding and comprehension of neuroscience, there are still many important unresolved issues in the field of neuroscience, resulting in a lack of effective measures to prevent and protect brain health. Therefore, in addition to actively developing new generation drugs, exploring non pharmacological treatment strategies with better health benefits and higher safety is particularly important. Epidemiological data shows that, exercise is not only an indispensable part of daily life but also an important non-pharmacological approach for protecting brain health and preventing neurodegenerative diseases, forming an emerging research field known as motor neuroscience. Basic research in motor neuroscience primarily focuses on analyzing the dynamic coding mechanisms of neural circuits involved in motor control, breakthroughs in motor neuroscience research depend on the construction of dynamic monitoring systems across temporal and spatial scales. Therefore, high spatiotemporal resolution detection of movement processes and movement-induced changes in brain structure and neural activity signals is an important technical foundation for conducting motor neuroscience research and has developed a set of tools based on traditional neuroscience methods combined with novel motor behavior decoding technologies, providing an innovative technical platform for motor neuroscience research. The protective effect of exercise in neurodegenerative diseases provides broad application prospects for its clinical translation. Applied research in motor neuroscience centers on deciphering the regulatory networks of neuroprotective molecules mediated by exercise. From the perspectives of exercise promoting neurogenesis and regeneration, enhancing synaptic plasticity, modulating neuronal functional activity, and remodeling the molecular homeostasis of the neuronal microenvironment, it aims to improve cognitive function and reduce the incidence of Parkinson’s disease and Alzheimer’s disease. This has also advanced research into the molecular regulatory networks mediating exercise-induced neuroprotection and facilitated the clinical application and promotion of exercise rehabilitation strategies. Multidimensional analysis of exercise-regulated neural plasticity is the theoretical basis for elucidating the brain-protective mechanisms mediated by exercise and developing intervention strategies for neurological diseases. Thus,real-time analysis of different neural signals during active exercise is needed to study the health effects of exercise throughout the entire life cycle and enhance lifelong sports awareness. Therefore, this article will systematically summarize the innovative technological developments in motor neuroscience research, review the mechanisms of neural plasticity that exercise utilizes to protect the brain, and explore the role of exercise in the prevention and treatment of major neurodegenerative diseases. This aims to provide new ideas for future theoretical innovations and clinical applications in the field of exercise-induced brain protection.

ObjectiveBased on the AMP-activated protein kinase （AMPK）/mammalian target of rapamycin （mTOR） signaling pathway， this study aimed to observe the effect of the Huazhuo Jiedu prescription on renal fibrosis in 5/6 nephrectomy rats and explore its underlying mechanism. MethodsA total of 67 SPF-grade male SD rats were used， of which 11 were randomly selected as the normal group. A chronic renal failure （CRF） model was established using 5/6 nephrectomy. The successfully modeled rats were randomly assigned to the model group， losartan potassium group （4.5 mg·kg^-1）， and low- （1.175 g·kg^-1）， medium- （2.35 g·kg^-1） and high-dose （4.7 g·kg^-1） Huazhuo Jiedu prescription groups， with 9 rats per group. Each group received an equivalent volume of saline or the corresponding concentration of Huazhuo Jiedu prescription by gavage once daily for 8 weeks. Hematoxylin-eosin （HE） and Masson staining were used to observe renal tissue pathological changes. Transmission electron microscopy examined renal ultrastructure. Immunohistochemistry （IHC） detected expressions of α-smooth muscle actin （α-SMA） and transforming growth factor-β₁ （TGF-β₁）. Western blot analyzed expression levels of microtubule-associated protein Ⅰ light chain 3Ⅱ （LC3Ⅱ）， Beclin1， p62， AMPK， phosphorylated AMPK （p-AMPK）， mTOR， and phosphorylated mTOR （p-mTOR）. ResultsCompared with the normal group， the model group exhibited glomerular shrinkage， mesangial and interstitial thickening， and tubular vacuolar degeneration， with no evident autophagosomes or autophagolysosome structures. Expression levels of α-SMA and TGF-β₁ were significantly increased （P0.01）， while p-AMPK/AMPK， Beclin1， and LC3Ⅱ were significantly decreased （P0.01）， and p-mTOR/mTOR and p62 were significantly increased （P0.01）. Compared with the model group， the medium- and high-dose Huazhuo Jiedu prescription groups and the losartan potassium group showed varying degrees of pathological improvement. Autophagosomes with double- or multiple-layer membranes and autophagolysosomes with monolayer membranes containing undegraded organelles were observed. Renal α-SMA and TGF-β₁ protein expression levels were markedly reduced （P0.05， P0.01）， p-mTOR/mTOR and p62 were significantly decreased （P0.05， P0.01）， and p-AMPK/AMPK， Beclin1， and LC3Ⅱ expression levels were significantly increased （P0.05， P0.01）. ConclusionHuazhuo Jiedu prescription may improve renal fibrosis in 5/6 nephrectomy rats by regulating the AMPK/mTOR signaling pathway and enhancing autophagy.

OBJECTIVES: To classify bladder cancer based on immune cell infiltration score and to construct a risk assessment model for prognosis of patients. METHODS: The transcriptome data and data of breast cancer patients were obtained from the TCGA database. The single sample gene set enrichment analysis was used to calculate the infiltration scores of 16 immune cells. The classification of breast cancer patients was realized by unsupervised clustering, and the sensitivity of patients with different types to immunotherapy and chemotherapy was analyzed. The key modules significantly related to the infiltration of key immune cells were identified by weighted correlation network analysis (WGCNA), and the key genes in the modules were extracted. A risk scoring model and a nomogram for risk assessment of prognosis for bladder cancer patients were constructed and verified. RESULTS: The immune cell infiltration scores of normal tissues and tumor tissues were calculated, and B cells, mast cells, neutrophils, T helper cells and tumor infiltrating lymphocytes were determined to be the key immune cells of bladder cancer. Breast cancer patients were clustered into two groups (Cluster 1 and Custer 2) based on immune cell infiltration scores. Compared with patients with Cluster 1, patients with Cluster 2 were more likely to benefit from immunotherapy (P<0.05), and patients with Cluster 2 were more sensitive to Enbeaten, Docetaxel, Cyclopamine, and Akadixin (P<0.05). WGCNA screened out 35 genes related to key immune cells, and 4 genes (GPR171, HOXB3, HOXB5 and HOXB6) related to the prognosis of bladder cancer were further screened by LASSO Cox regression. The areas under the ROC curve (AUC) of the bladder cancer prognosis risk scoring model based on these 4 genes to predict the 1-, 3- and 5-year survival of patients were 0.735, 0.765 and 0.799, respectively. The nomogram constructed by combining risk score and clinical parameters has high accuracy in predicting the 1-, 3-, and 5-year overall survival of bladder cancer patients. CONCLUSIONS According to the immune cell infiltration score, bladder cancer patients can be classified. And the bladder cancer prognosis risk scoring model and nomogram based on key immune cell-related genes have high accuracy in predicting the prognosis of bladder cancer patients.

Objective To explore the manufacturing process and performance of laser-cut 316L medical catheters based on catheter designs with different cutting methods.Methods Two design schemes of straight and oblique spiral cut were proposed under interrupted spiral cut pattern.Straight and oblique spiral cut medical catheters were obtained with desired laser parameters,cutting speed and focus position of the laser cutting machine,oxygen as the auxiliary gas and nitric acid and hydrofluoric acid as the acid cleaning solution for the post-treatment process,which were compared with Direxion torqueable microcatheter and tested for traceability,torsion control and tensile strength.Results Laser-cut 316L medical catheters were less likely to hurt blood vessels for its advantages over Direxion torqueable microcatheter in surface brightness and roundness of grooved edges,while Direxion torqueable microcatheter behaved better in intensity and width uniformity of grooves and regularity of semi circles at ends of grooves.Straight spiral cut medical catheters had the traceability,torsion control and tensile strength increased by 50％,22％and 33％respectively when compared with oblique spiral cut catheters.Conclusion Laser cutting parameters and post-treatment process are the main factors affecting the appearance and size of laser cut medical catheters,and also of importance for improving the qualified rate of product processing and assembly.The catheter cutting design scheme is also a key element influencing the physical properties of medical catheters.[Chinese Medical Equipment Journal,2024,45(1):31-36]

Objective:To classify bladder cancer based on immune cell infiltration score and to construct a prognosis assessment model of patients with bladder cancer.Methods:The transcriptome data and clinical data of breast cancer patients were obtained from the The Cancer Genome Atlas(TCGA)database.Single sample gene set enrichment analysis was used to calculate the infiltration scores of 16 immune cells.The classification of breast cancer patients was achieved by unsupervised clustering,and the sensitivity of patients with different types to immunotherapy and chemotherapy was analyzed.The key modules significantly related to the infiltration of key immune cells were identified by weighted correlation network analysis(WGCNA),and the key genes in the modules were identified.A risk scoring model and a nomogram for prognosis assessment of bladder cancer patients were constructed and verified.Results:B cells,mast cells,neutrophils,T helper cells and tumor infiltrating lymphocytes were determined to be the key immune cells of bladder cancer.The patients were clustered into two groups(Cluster 1′ and Custer 2)based on immune cell infiltration scores.Compared with patients with Cluster 1′,patients with Cluster 2 were more likely to benefit from immunotherapy(P<0.05),and patients with Cluster 2 were more sensitive to Enbeaten,Docetaxel,Cyclopamine,and Akadixin(P<0.05).35 genes related to key immune cells were screened out by WGCNA and 4 genes(GPR171,HOXB3,HOXB5 and HOXB6)related to the prognosis of bladder cancer were further screened by LASSO Cox regression.The areas under the ROC curve(AUC)of the bladder cancer prognosis risk scoring model based on these 4 genes to predict the 1-,3-and 5-year survival of patients were 0.735,0.765 and 0.799,respectively.The nomogram constructed by combining risk score and clinical parameters has high accuracy in predicting the 1-,3-,and 5-year overall survival of bladder cancer patients.Conclusions:According to the immune cell infiltration score,bladder cancer patients can be classified.Furthermore,bladder cancer prognosis risk scoring model and nomogram based on key immune cell-related genes have high accuracy in predicting the prognosis of bladder cancer patients.