Objective To analyze the urban drinking water quality and its influencing factors in Anhui Province from 2014 to 2022, and to provide a scientific basis for water quality improvement and protection. Methods The data were collected, saved and monitored according to the Standard Test Method for Drinking Water (GB/T5750-2006) and evaluated according to the Hygienic Standard for Drinking Water (GB 5749-2006). Results A total of 20 941 samples were collected, and the overall qualified rate was 84.26%. The qualified rate of urban drinking water increased from 76.9% in 2014 to 93.3% in 2022, and the qualified rate of water quality was on the rise (χ²=544.43, P＜0.01). From 2014 to 2022, the qualified rate of water quality in dry season was higher than that in wet season (χ²=35.98, P<0.001), the qualified rate of surface water was higher than that of ground water (χ²=4440.8, P<0.001), and the qualified rate of peripheral tap water was higher than that of factory water (χ²=145.1, P<0.001). Among all kinds of disinfection methods, chlorination disinfection had the highest qualified rate (χ²=1483.8, P<0.001). The qualified rate of water quality increased with the increase of the scale of water plant. Among the inspected indicators, the main unqualified indicators were chlorine dioxide (7.72%), fluoride (7.41%), free residual chlorine (3.90%), and total bacterial count (2.13%). Conclusion The passing rate of urban drinking water quality in Anhui Province is on an upward trend, and the quality of urban drinking water has improved. However, it is still important to pay attention to the problem of excessive microorganism and fluoride in water, and the quality of drinking water varies from place to place.

Background The Qingcaosha Reservoir is facing issues of algal blooms and eutrophication, and the resulting increase in the level of chlorination disinfection by-products in the water has been a major concern. Objective To evaluate the impact of "Algae Monitoring and Control Program in Qingcaosha Reservoir" (hereinafter referred to as the program) on the control of trihalomethanes (THMs) in conventional finished water. Methods From 2011 to 2019, water samples were collected from the Lujiazui Water Plant once per season, one sample each time, and the concentrations of four THMs (trichloromethane, dichlorobromomethane, monochlorodibromomethane, and tribromomethane) were measured in the samples. Using 2014 when the program was implemented as a cut-off point, the entire study period was divided into two phases: pre-implementation (2011–2013) and post-implementation(2014–2019). Segmented linear regression with interrupted time series analysis was applied to assess the concentrations and trends of THMs in the finished water before and after the program launch. Results The concentration of total THMs in finished water increased by 1.561 µg·L⁻¹ (P=0.010) for each season of time extension before launching the program. The change in the concentration of total THMs in finished water was not statistically significant after the program launch, but the THMs concentration showed a decreasing trend as the slope was −0.626 (P=0.001). From 2017 until the end of 2019, the average concentration of THMs in finished water of Lujiazui Water Plant dropped to 10 μg·L⁻¹ or less. Conclusions The algae and eutrophication control measures in Qingcaosha Reservoir have achieved good results, controlling THMs in finished water at a low level, and the trend of THMs has changed from a yearly increase pattern before the program to a yearly decrease pattern after the program.

Objective To develop nurses'knowledge,attitude and practice questionnaire on medication management for patients with dysphagia,and test its reliability and validity.Methods Based on the evidence-based summary of the best evidence of medication management for patients with dysphagia,guided by the the-ory of knowledge,attitude and practice,the basic dimensions and item pool of the questionnaire were deter-mined through group discussion,Delphi expert consultation and pre-investigation.In order to revise the ques-tionnaire,437 nurses from 10 tertiary hospitals in Jiangsu Province were conveniently selected for investigation,and the reliability and validity of the questionnaire were tested according to the survey results.Results The nurses'knowl-edge,attitude and practice questionnaire on medication management for patients with dysphagia included 43 items in three dimensions.The three dimensions were analyzed by exploratory factors,and six common factors with characteristic roots>1 were extracted.Two factors were extracted from the knowledge dimension,and the cumulative variance contribution rate was 74.958%,One factor was extracted from the attitude dimen-sion,and the cumulative variance contribution rate was 77.655%.Three factors were extracted from the prac-tice dimension,and the cumulative variance contribution rate was 72.274%.The factor load of each item was 0.618-0.902,Cronbach's α coefficient of the total questionnaire was 0.949,and the test-retest reliability was 0.909.The overall content validity coefficient of the questionnaire was 0.922,and the content validity coeffi-cient for each item was 0.800-1.000.Conclusion The nurses'knowledge,attitude and practice questionnaire on medication management for patients with dysphagia developed in this study has good reliability and validi-ty,and could be used as an effective tool to evaluate the status quo of nurses'medication management for pa-tients with dysphagia.

BACKGROUND:As tissue engineering brings new hope to the worldwide problem of articular cartilage repair,the construction of light-curing 3D printed hydrogel scaffolds with biomimetic composition is of great significance for cartilage tissue engineering. OBJECTIVE:To construct a biomimetic methacryloylated hyaluronic acid/acellular Wharton's jelly composite hydrogel scaffold by digital light processing 3D printing technology,and to evaluate its biocompatibility. METHODS:Wharton's jelly was isolated and extracted from human umbilical cord,then decellulated,freeze-dried,ground into powder,and dissolved in PBS to prepare 50 g/L acellular Wharton's jelly solution.Methylallylated hyaluronic acid was prepared,lyophilized and dissolved in PBS to prepare 50 g/L methylallylated hyaluronic acid solution.Acellular Wharton's jelly solution was mixed with methacrylyacylated hyaluronic acid solution at a volume ratio of 1:1,and was used as bio-ink after adding photoinitiator.Methylacrylylated hyaluronic acid hydrogel scaffolds(labeled as HAMA hydrogel scaffolds)and methylacrylylated hyaluronic acid/acellular Wharton's jelly gel scaffolds(labeled as HAMA/WJ hydrogel scaffolds)were prepared by digital light processing 3D printing technology,and the microstructure,swelling performance,biocompatibility,and cartilage differentiation performance of the scaffolds were characterized. RESULTS AND CONCLUSION:(1)Under scanning electron microscope,the two groups of scaffolds showed a three-dimensional network structure,and the fiber connection of HAMA/WJ hydrogel scaffold was more uniform.Both groups achieved swelling equilibrium within 10 hours,and the equilibrium swelling ratio of HAMA/WJ hydrogel scaffold was lower than that of HAMA hydrogel scaffold(P＜0.05).(2)CCK-8 assay showed that HAMA/WJ hydrogel scaffold could promote the proliferation of bone marrow mesenchymal stem cells compared with HAMA hydrogel scaffold.Dead/live staining showed that bone marrow mesenchymal stem cells grew well on the two groups of scaffolds,and the cells on the HAMA/WJ hydrogel scaffolds were evenly distributed and more cells were found.Phalloidine staining showed better adhesion and spread of bone marrow mesenchymal stem cells in HAMA/WJ hydrogel scaffold than in HAMA.(3)Bone marrow mesenchymal stem cells were inoculated into the two groups for chondrogenic induction culture.The results of qRT-PCR showed that the mRNA expressions of agglutinoglycan,SOX9 and type Ⅱ collagen in the HAMA/WJ hydrogel scaffold group were higher than those in the HAMA hydrogel scaffold group(P＜0.05,P＜0.01).(4)These findings indicate that the digital light processing 3D bioprinting HAMA/WJ hydrogel scaffold can promote the proliferation,adhesion,and chondrogenic differentiation of bone marrow mesenchymal stem cells.

This study using maltodextrin as raw material, 1%-5% polyvinylpyrrolidone K30 as template agent, 1%-5% ammonium bicarbonate as pore-forming agent, curcumin and ibuprofen as model drugs. Porous maltodextrin was prepared by template and pore-forming agent methods, respectively. The structure and drug delivery behavior of porous maltodextrin prepared by different technologies were comprehensively characterized. The results showed that the porous maltodextrin prepared by pore-forming agent method had larger specific surface area (6.449 4 m²·g^-1) and pore size (32.804 2 nm), which was significantly better than that by template agent method (3.670 2 m²·g^-1, 15.278 5 nm). The adsorption kinetics between porous maltodextrin prepared by pore-forming agent method and curcumin were suitable for quasi-first order adsorption kinetic model, and that between porous maltodextrin and ibuprofen were suitable for quasi-second order adsorption kinetic model. While the adsorption kinetics between porous maltodextrin prepared by template agent method and two model drugs were both suitable for the quasi-first order adsorption kinetic model. In addition, the dissolution behavior analysis showed that the porous maltodextrin prepared by the two technologies can significantly improve the dissolution behavior of insoluble drugs, and the drug release was both carried out by diffusion mechanism, which suitable for the Peppas kinetic release model, but the porous maltodextrin prepared by template agent method had a faster release rate. The change of nozzle diameter had no significant effect on the adsorption process and drug release behavior of porous maltodextrin. In conclusion, the porous maltodextrins prepared by two different technologies were both beneficial to the delivery of insoluble drugs, and the template agent method was the best for delivery of insoluble drugs. This study can provide theoretical basis for the preparation of porous particles, promote the application of porous particles in insoluble drugs, and improve the bioavailability of insoluble drugs.

Objective:To study the whole bone marrow cellular composition of jaw and long bones, and further analyze the heterogeneity of mesenchymal stem cells (MSCs) derived from these two tissue, aiming at exploring the differences in functional characteristics of bone MSCs from different lineage sources.Methods:The Seurat package of R language was used to analyze the mandibular and femur whole bone marrow single-cell RNA-sequencing (scRNA-seq) datasets in the literature, and the subpopulations were annotated by reference to the marker genes reported by previous studies. The differentially expressed genes between mandible-derived MSCs (M-MSCs) and femur-derived MSCs (F-MSCs) were calculated, and cell-cell communication analysis between M-MSCs or F-MSCs with other cell populations was performed. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses were performed on up-regulated and down-regulated differentially expressed genes of M-MSCs, and Gene Set Enrichment Analysis (GSEA) was performed on M-MSCs or F-MSCs.Results:cRNA-seq analysis showed that the mandible and femur had the same bone marrow cell composition, but there were differences in the proportion of specific cell populations. Also, there were significantly differentially expressed genes between M-MSCs and F-MSCs. In addition, cell-cell communication analysis revealed differences in numbers of ligand-receptor pairs between M-MSCs or F-MSCs with other cell populations. Furthermore, GO, KEGG and GSEA analysis showed that M-MSCs had higher extracellular matrix production potential than F-MSCs, but had lower ability to regulate other cells in the bone marrow, especially immune cells.Conclusions:M-MSCs and F-MSCs showed distinct differences in the gene expression pattern and up-regulated signaling pathways, which may be closely related to the developmental sources and functional characteristics of jaw and long bones.

Objective:To explore the biological process of liver tissue-derived extracellular vesicle (LT-EV) in promoting osteogenic differentiation of mesenchymal stem cells and healing of jaw defects to provide a feasible treatment method for the clinical treatment of jaw bone defects.Methods:Enzymatic hydrolysis and differential centrifugation were used to extract LT-EV, scanning electron microscopy, Western blotting, and nanoparticle tracking analyzers were used to identify and characterize LT-EV, and further to explore the biological functions of LT-EV through proteomics and Kyoto Encyclopedia of Genes and Genomes. Flow cytometry was used to detect LT-EV plasma concentration and to calculate the plasma half-life of LT-EV. Small animal in vivo imaging system was used to detect the biological distribution of LT-EV 24 hours after injection. Six C57BL/6 mice were divided into control group and LT-EV group (3 mice in each group) by simple random sampling method. All mice underwent jaw bone defect surgery and tail vein injection every 7 days (the control group was injected with phosphoric buffer saline, LT-EV group was injected with LT-EV), micro-CT was used to evaluate the degree of mouse jaw bone healing 28 days after surgery, HE staining was used to analyze the multi-organ biosafety of LT-EV, and immunofluorescence staining was used to detect the jaw bone expression of osteogenic marker proteins in the defect area. Human jaw bone mesenchymal stem cells (hJBMSC) induced by osteogenic differentiation were treated with LT-EV (obtained from orthognathic surgery patients provided by the Department of Traumatology and Orthognathic Surgery of School of Stomatology of The Fourth Military Medical University resected normal jaw bone fragments), and the difference in osteogenic differentiation ability between the hJBMSC group and the control group (phosphate buffer saline treatment) was compared, and the in vitro bone differentiation promoting effect of LT-EV was verified through alkaline phosphatase (ALP) staining and real-time fluorescence quantitative PCR. Results:The yield of LT-EV was high, and proteomics and Kyoto Encyclopedia of Genes and Genomes showed that LT-EV contained a series of proteins that regulated cell biological functions. LT-EV injected into the tail vein could reach the mouse jaw bone defect area and promote the regeneration and repair of the jaw bone defect [the bone volume fractions of the LT-EV group and the control group were (36.06±4.20)% and (18.58±5.61)%, respectively; t=4.32, P=0.013], and had good biosafety. LT-EV could promote osteogenic differentiation of hJBMSC in vitro. Compared to the control group, ALP staining and osteogenic gene expression levels were significantly enhanced after osteogenic differentiation of hJBMSC ( P<0.05). Conclusions:LT-EV exhibits a high yield, ease of acquisition, high biological safety, and excellent bone-promoting effects. It holds promise as a novel cell-free therapy strategy for regenerating craniofacial bone defects.

OBJECTIVE To discuss the relationship between the main concentration of air-borne pollen and the number of visits for allergic diseases in Chengde City. METHODS The daily airborne pollen concentration and species in Chengde City,Hebei Province were monitored by gravity sedimentation method from March 1 to October 15,in 2020-2022. The number of visits of patients with allergic rhinitis,asthma and conjunctivitis in department of otorhinolaryngology,respiratory and ophthalmology were counted by HIS system in the hospital computer center,furthermore,the correlation between pollen concentration and the number of visits of the above diagnosed patients was analyzed. RESULTS The pollen concentration in Chengde showed two peaks each year,which were in May in spring and August in autumn. The main pollen sources in spring were Pinaceae,ash,birch,ulmaceae,Cupressaceae,Moraceae and Rosaceaceae,accounting for 82.6％ of the total annual pollen(78.2％,83.5％,and 86.1％ in 2020-2022,respectively). In autumn,artemisia and humulus were the main sources of pollen,accounting for 9.94％ of the total annual pollen(11.4％,6.3％,12.11％,in 2020-2022,respectively). The number of outpatient visits patients with allergic rhinitis,asthma and conjunctivitis were higher in May and August than in other months,and the number of patients with allergic rhinitis in August was significantly increased compared with other months(P<0.05). The total monthly visits of the three departments and the visits of the three allergic diseases were positively correlated with pollen concentration. CONCLUSION The pollen concentration in the spring and autumn seasons of Chengde City has a direct impact on allergic diseases. Monitoring and broadcasting pollen concentration can provide early warning for doctors and patients,and provide effective information for early intervention,protection,and reasonable treatment of diseases.

Acute leukaemia is a group of aggressive malignancies with a high mortality rate.The reduction in functional immune cells due to the disease itself and radiotherapy/chemotherapy makes the patients susceptible to co-infections,of which pulmonary infection is a major cause of death.Early accurate diagnosis and appropriate treatment may prevent the spread of infection in patients with acute leukaemia complicated with pulmonary infection,thus reduce serious complications such as sepsis,respiratory failure and multi-organ failure.However,there are still clinical difficulties in the diagnosis and treatment of pulmonary infections in acute leukemia patients.Therefore,the current research advances in the diagnosis and treatment of bacterial,fungal and viral infections in the lungs of patients with acute leukemia were briefly summarized in this review.

Objective:To explore and compare the image quality and radiation dose between the spiral scanning and the axial scanning for skull phantom based on specific conditions.Methods:The position of the orbitomeatal base line(OBL)of the skull phantom was marked,and the different angles of elevation of skull were adjusted.The angles between OBL and bed surface were respectively set as 90°,100°,110° and 120°.The axial scanning and spiral scanning were respective adopted to conduct 24 times of image acquisition when the computed tomography dose index(CTDIvol)of fixed volume were respectively 40,50 and 60 mGy.The cross section of axial scanning was vertical to OBL,and the images of spiral scanning used the reconstructed technique of image quality enhancement(IQE)of removing spiral artifacts to conduct reconstruction along the OBL direction.The CT value(HU)and standard deviation(SD)of the bilateral cerebellum,temporal lobe,frontal lobe and parietal lobe of the phantom were measured,and the signal-to-noise ratio(SNR)of each lobe of the phantom was calculated.The CTDIvol and dose-length product(DLP)were recorded,and the effective dose(ED)of lens was calculated.Results:The differences of the SNR values of cerebellum and occipital lobe(R),cerebellum and occipital lobe(L),temporal lobe(R),temporal lobe(L),frontal lobe(R),frontal lobe(L),parietal lobe(R)and parietal lobe(L)between two kinds of scanning models were significant(F=6.48,5.83,7.00,6.20,7.30,8.26,5.72,5.83,P<0.05),respectively.There was significant difference in lens DLP between the two kinds of scanning models(F=10.96,P<0.05).The spiral scanning and IQE reconstructed technique were used to conduct image acquisition and processing.The SNR value of spiral scanning imaging was better than that of axial scanning,and the reconstructions of coronal and sagittal positions could be conducted,and the radiation doses of lens were similar,but the DLP value of spiral scanning was slightly higher than that of axial scanning at the same CTDIvol.Conclusion:Using the IQE reconstruction technique of spiral scanning can obtain satisfactory CT sectional images of skull under the situations that machine cannot change scanning angle or the scanning of axial position is unable to conduct cooperation.