Objective To elucidate the molecular mechanism of sirtuin-3 (SIRT3) in regulating mitochondrial biogenesis in human renal tubular epithelial cells. Methods Cells were stimulated with different concentrations of H₂O₂ and divided into four groups: control (NC), 50 μmol/L H₂O₂, 110 μmol/L H₂O₂ and 150 μmol/L H₂O₂. SIRT3 protein expression was then measured. SIRT3 was knocked down with siRNA, and cells were further assigned to five groups: control (NC), negative-control siRNA (NCsi), SIRT3-siRNA (siSIRT3), NCsi+H₂O₂, and siSIRT3+H₂O₂. After 24 h, cellular adenosine triphosphate (ATP) and mitochondrial superoxide anion (O₂•⁻) levels were determined, together with mitochondrial expression of SIRT3, peroxisome proliferator-activated receptor γ coactivator-1α (PGC-1α), nuclear respiratory factor 1 (NRF1), mitochondrial transcription factor A (TFAM), superoxide dismutase 2 (SOD2), acetylated-SOD2 and adenosine monophosphate activated protein kinase α1 (AMPKα1). Results The 110 and 150 μmol/L H₂O₂ decreased SIRT3 protein (both P<0.05). ATP and mitochondrial O₂•⁻ did not differ between NC and NCsi groups (both P>0.05). Compared to the NCsi group, the siSIRT3 group exhibited elevated O₂•⁻ level, decreased SIRT3 protein and increased expression levels of SOD2 and acetylated SOD2 protein (all P<0.05). Compared to the NCsi group, the NCsi+H₂O₂ group exhibited decreased cellular ATP levels, elevated mitochondrial O₂•⁻ levels, and reduced protein expression levels of SIRT3, SOD2, TFAM, AMPKα1, PGC-1α and NRF1 (all P<0.05). Compared with the siSIRT3 group, the siSIRT3+H₂O₂ group showed a decrease in cellular ATP levels, an increase in mitochondrial O₂•⁻ levels, a decrease in SIRT3, SOD2, TFAM, AMPKα1, PGC-1α and NRF1 protein expression levels and a decrease in acetylated SOD2 protein expression levels (all P<0.05). Compared with the NCsi+H₂O₂ group, the siSIRT3+H₂O₂ group showed a decrease in cellular ATP levels, an increase in mitochondrial O₂•⁻ levels, a decrease in SIRT3, AMPKα1, PGC-1α and NRF1, TFAM protein expression levels, and an increase in SOD2 and acetylated SOD2 protein expression levels (all P<0.05). Conclusions SIRT3 promotes mitochondrial biogenesis in tubular epithelial cells via the AMPK/PGC-1α/NRF1/TFAM axis, representing a key mechanism through which SIRT3 ameliorates oxidative stress-induced mitochondrial dysfunction.

OBJECTIVE To investigate the apoptosis-inducing effect of esculetin （Esc） on acute myeloid leukemia （AML） HL-60 cells by regulating the protein kinase B （AKT）/S-phase kinase-associated protein 2 （SKP2）/MutT homolog 1 （MTH1） pathway. METHODS AML HL-60 cells were randomly divided into control group （routine culture）， Esc low-concentration group （L-Esc group， 25 μmol/L Esc）， Esc medium-concentration group （M-Esc group， 50 μmol/L Esc）， Esc high-concentration group （H-Esc group， 100 μmol/L Esc）， and high-concentration of Esc+ SC79 （AKT agonist） group （100 μmol/L Esc+5 μmol/L SC79）. Cell proliferation in each group was detected by MTT assay and colony formation assay. The level of reactive oxygen species （ROS） in cells was measured by using the CM-H2DCFDA fluorescent probe. Cell apoptosis was analyzed by flow cytometry. Western blot assay was performed to detect the expression levels of apoptosis-related proteins [B-cell lymphoma 2 （Bcl-2）， Bcl-2-associated X protein （Bax）， cleaved caspase-3]， AKT/SKP2/MTH1 pathway-related proteins （p-AKT， AKT， SKP2， MTH1）， along with the upstream and downstream proteins of AKT phosphatidylinositol 3-kinase （PI3K）， cyclin-dependent kinase inhibitor 1 （P21） and cyclin-dependent kinase inhibitor 1B （P27）. RESULTS Compared with control group， the cell viability， colony number， and the phosphorylation levels of AKT and PI3K proteins as well as protein expressions of SKP2， MTH1 and Bcl-2 were significantly decreased （P＜0.05）， while ROS level， apoptosis rate， and the expression levels of Bax， cleaved caspase-3， P21 and P27 proteins were significantly increased （P＜0.05）. Moreover， the effects of Esc exhibited concentration-dependence （P＜0.05）. Compared with H-Esc group， above indexes of high-concentration of Esc+ SC79 group were reversed significantly （P＜0.05）. CONCLUSIONS Esc may promote massive ROS production and induce activation of apoptosis in HL-60 cells by inhibiting the AKT/SKP2/MTH1 pathway， thus inhibiting the proliferation of HL-60 cells.

Aromatic Chinese medicinal essential oils are volatile oils extracted from aromatic Chinese herbs， which can prevent and treat respiratory infectious diseases through multiple synergistic mechanisms including pathogen inhibition， immune regulation， and inflammatory response regulation. Essential oils are primarily used externally on the body to prevent infections and alleviate symptoms through methods like inhalation， smearing， topical application， bathing， gargling or as a suppository. They can also be utilized in the environment for disinfection and air purification， through methods like diffusion， vaporization， or spraying. The external application of essential oils extracted from Chinese aromatic herbs has the advantages of convenience， quick absorption， and simultaneous influence on both the body and mind. However， there are still challenges and deficiencies in aspects such as the positioning of functions， indications， safety， and the research on the mechanism of action. It has been proposed to combine the theory of aromatic Chinese medicinals with the characteristics of essential oils， and formulate prescriptions of Chinese medicinal essential oils under the principles of traditional Chinese medicine syndrome differentiation， and prevent and treat respiratory infectious diseases efficiently， accurately， and safely， thereby expanding the clinical application of aromatic Chinese medicinals and the preventive theory of traditional Chinese medicine.

BACKGROUND:We have successfully established an animal model of small ear pig in southern Yunnan province with internal tension relieving technique combined with autologous Achilles tendon for anterior cruciate ligament reconstruction,and verified the stability and reliability of the model.However,whether internal tension relieving technique can promote the ligamentalization process of autologous Achilles tendon graft has not been studied. OBJECTIVE:To investigate the differences in the process of ligamentalization between conventional reconstruction and internal reduction reconstruction of the anterior cruciate ligament by gross view,histology and electron microscopy. METHODS:Thirty adult female small ear pigs in southern Yunnan province were selected.Anterior cruciate ligament reconstruction was performed on the left knee joint with the ipsilateral knee Achilles tendon(n=30 in the normal group),and anterior cruciate ligament reconstruction was performed on the right knee joint with the ipsilateral knee Achilles tendon combined with the internal relaxation and enhancement system(n=30 in the relaxation group).The autogenous right forelimb was used as the control group;the anterior cruciate ligament was exposed but not severed or surgically treated.At 12,24,and 48 weeks after surgery,10 animals were sacrificed,respectively.The left and right knee joint specimens were taken for gross morphological observation to evaluate the graft morphology.MAS score was used to evaluate the excellent and good rate of the ligament at each time point.Hematoxylin-eosin staining was used to evaluate the degree of ligament graft vascularization.Collagen fibers and nuclear morphology were observed,and nuclear morphology was scored.Ultrastructural remodeling was evaluated by scanning electron microscopy and transmission electron microscopy. RESULTS AND CONCLUSION:(1)The ligament healing shape of the relaxation group was better at various time points after surgery,and the excellent and good rate of MAS score was higher(P<0.05).Moreover,the relaxation group could obtain higher ligament vascularization score(P<0.05).(2)The arrangement of collagen bundles and fiber bundles in the two groups gradually tended to be orderly,and the transverse fiber connections between collagen gradually increased and thickened,suggesting that the strength and shape degree of the grafts were gradually improved,but the ligament remodeling in the relaxation group was always faster than that in the normal group at various time points after surgery.(3)The diameter,distribution density,and arrangement degree of collagen fibers in the relaxation group were better than those in the normal group at all time points,especially in the comparison of collagen fiber diameter between and within the relaxation group(P<0.05).

Three-dimensional(3D)printing technology represents an additive manufacturing process wherein computer-aided designs are materialized through the sequential layering of materials by 3D printers, culminating in the formation of complete objects. Since its inception, this technology has found extensive application across various clinical domains, notably enhancing outcomes in surgical assistance. Recently, the utilization of 3D printing in ophthalmic plastic surgery has gained momentum, with researchers conducting numerous valuable explorations into the design of ophthalmic plastic surgeries, the development of surgical fillers for ophthalmic plastic orbital conditions, and the customized design of auxiliary devices for bothoncological and non-oncological lesions. Despite the majority of these studies being confined to the conceptual design phase or limited to case studies, 3D printing technology has demonstrated unparalleled advantages in elevating therapeutic efficacy and surgical precision. To encapsulate the current state and future research directions of 3D printing technology within the realm of ophthalmic plastic surgery, this article aims to review its applications in this field, with the intention of providing a reference for pertinent clinical investigations.

AIM: To delineate the specific mutation responsible for retinitis pigmentosa(RP)in a Yi pedigree, and to analyze the correlation of RHO gene mutation with clinical phenotype.METHODS:A comprehensive clinical evaluation was conducted on the proband diagnosed with RP and other familial members, complemented by a thorough ophthalmic examination. Peripheral blood samples were obtained from the proband and familial members, from which genomic DNA was extracte. Subsequent whole exome sequencing(WES)was employed to identify the variant genes in the proband. The identified variant gene was validated through Sanger sequencing, then an in-depth analysis of the mutation genes was carried out using genetic databases to ascertain the pathogenic mutation sites. Furthermore, an exhaustive analysis was performed to delineate the genotype and phenotype characteristics.RESULTS:The RP pedigree encompasses 5 generations with 42 members, including 19 males and 23 females. A total of 13 cases of RP were identified, consisting of 4 males and 9 females, which conforms to the autosomal dominant inheritance pattern. The clinical features of this family include an early onset age, rapid progression, and a more severe condition. The patients were found to have night blindness around 6 years old, representing the earliest reported case of night blindness in RP families. The retina was manifested by progressive osteocytoid pigmentation of the fundus, a reduced visual field, and significantly decreased or even vanished a and b amplitudes of ERG. The combined results of WES and Sanger sequencing indicated that the proband had a heterozygous missense mutation of the RHO gene c.1040C>T:p.P347L, where the 1 040 base C of cDNA was replaced by T, causing codon 347 to encode leucine instead of proline. Interestingly, this mutation has not been reported in the Chinese population.CONCLUSION:This study confirmed that the mutant gene of RP in a Yi nationality pedigree was RHO(c.1040C>T). This variant leads to the change of codon 347 from encoding proline to encoding leucine, resulting in a severe clinical phenotype among family members. This study provides a certain molecular, clinical, and genetic basis for genetic counseling and gene diagnosis of RHO.

Three-dimensional(3D)printing technology represents an additive manufacturing process wherein computer-aided designs are materialized through the sequential layering of materials by 3D printers, culminating in the formation of complete objects. Since its inception, this technology has found extensive application across various clinical domains, notably enhancing outcomes in surgical assistance. Recently, the utilization of 3D printing in ophthalmic plastic surgery has gained momentum, with researchers conducting numerous valuable explorations into the design of ophthalmic plastic surgeries, the development of surgical fillers for ophthalmic plastic orbital conditions, and the customized design of auxiliary devices for bothoncological and non-oncological lesions. Despite the majority of these studies being confined to the conceptual design phase or limited to case studies, 3D printing technology has demonstrated unparalleled advantages in elevating therapeutic efficacy and surgical precision. To encapsulate the current state and future research directions of 3D printing technology within the realm of ophthalmic plastic surgery, this article aims to review its applications in this field, with the intention of providing a reference for pertinent clinical investigations.

AIM: To delineate the specific mutation responsible for retinitis pigmentosa(RP)in a Yi pedigree, and to analyze the correlation of RHO gene mutation with clinical phenotype.METHODS:A comprehensive clinical evaluation was conducted on the proband diagnosed with RP and other familial members, complemented by a thorough ophthalmic examination. Peripheral blood samples were obtained from the proband and familial members, from which genomic DNA was extracte. Subsequent whole exome sequencing(WES)was employed to identify the variant genes in the proband. The identified variant gene was validated through Sanger sequencing, then an in-depth analysis of the mutation genes was carried out using genetic databases to ascertain the pathogenic mutation sites. Furthermore, an exhaustive analysis was performed to delineate the genotype and phenotype characteristics.RESULTS:The RP pedigree encompasses 5 generations with 42 members, including 19 males and 23 females. A total of 13 cases of RP were identified, consisting of 4 males and 9 females, which conforms to the autosomal dominant inheritance pattern. The clinical features of this family include an early onset age, rapid progression, and a more severe condition. The patients were found to have night blindness around 6 years old, representing the earliest reported case of night blindness in RP families. The retina was manifested by progressive osteocytoid pigmentation of the fundus, a reduced visual field, and significantly decreased or even vanished a and b amplitudes of ERG. The combined results of WES and Sanger sequencing indicated that the proband had a heterozygous missense mutation of the RHO gene c.1040C>T:p.P347L, where the 1 040 base C of cDNA was replaced by T, causing codon 347 to encode leucine instead of proline. Interestingly, this mutation has not been reported in the Chinese population.CONCLUSION:This study confirmed that the mutant gene of RP in a Yi nationality pedigree was RHO(c.1040C>T). This variant leads to the change of codon 347 from encoding proline to encoding leucine, resulting in a severe clinical phenotype among family members. This study provides a certain molecular, clinical, and genetic basis for genetic counseling and gene diagnosis of RHO.

ObjectiveAt present, the most commonly used photosensitizers in photodynamic therapy are still chemical photosensitizers, such as porphyrin and methylene blue, in order to specifically target cellular tissues, and thus poison cells, chemical photosensitizers need to use antibody conjugation or a transgenically encoded tag with affinity for the modified photosensitizing ligand, e.g. FlAsH, ReAsh or Halo Tag. Gene-encoded photosensitizers can directly poison cells by targeting specific cell compartments or organelles. However, currently developed gene-encoded photosensitizers have low reactive oxygen species production and low cytotoxicity, so it is necessary to continue to develop and obtain photosensitizers with higher reactive oxygen species production for the treatment of microbial infections and tumors. MethodsIn this study, we developed a photosensitizer LovPSO2 based on the light-oxygen-voltage (LOV) structural domain of phototropin-1B-like from Oryza sativa japonica. LovPSO2 was expressed in E. coli BL21(DE3) and purified to obtain protein samples, the purified protein samples were added 3 µmol/L singlet oxygen probe of SOSG and 5 µmol/L superoxide anion probe of DHE after fixed to A₄₄₅=0.063±0.003, respectively, then measured every 2 min of singlet oxygen production for 10 min and every 1 min of superoxide anion production for 5 min under blue light irradiation at 445 nm, 70 µmol·m^-2·s^-1. ResultsThe results showed that LovPSO2 could produce a large amount of singlet oxygen under blue light irradiation at 445 nm, 70 µmol·m^-2·s^-1, and its singlet oxygen quantum yield was 0.61, but its superoxide anion yield was low, so in order to improve the superoxide anion yield of LovPSO2, a mutant with a relatively high superoxide anion yield was obtained by further development and design on its basis LovPRO2. The stability of proteins is crucial for research in drug development and drug delivery, among others. Temperature and light are the key factors affecting the production of reactive oxygen species (ROS) by photosensitive proteins and their stability, while the temperature in cell culture and mammals in vivo is about 37°C, and the temperature inside tumor cells is about 42-45°C. Therefore, we further analyzed the photostability of miniSOG, SOPP3, LovPSO2, and LovPRO2 and their thermostability at 37℃ and 45℃. The analysis of proteins thermostability showed that LovPSO2 and LovPRO2 had better thermostability at 37℃ and 45℃, respectively. Analysis of the photostability of the proteins showed that LovPRO2 had better photostability. In addition, to further determine the phototoxic effects of photosensitizers, LovPSO2 and LovPRO2 were expressed in E. coli BL21(DE3) and HeLa cells, respectively. The results showed that LovPSO2 and LovPRO2 had better phototoxicity to E. coli BL21(DE3) under blue light irradiation, and the cellular phototoxicity lethality was as high as 90% after 30 min of continuous light irradiation, but the phototoxicity was weaker in HeLa cells. The reason for this result may be that the intracellular environment exacerbated the photobleaching of FMN encapsulated by LovPSO2 and LovPRO2, respectively, which attenuated the damage of reactive oxygen species to animal cellular tissues, limiting its use as a mechanistic tool to study oxidative stress. ConclusionLovPSO2 and LovPRO2 can be used as antibacterial photosensitizers, which have broader application prospects in the food and medical fields.

During orthodontic treatment, clinical monitoring of patients is a crucial factor in determining treatment success. It aids in timely problem detection and resolution, ensuring adherence to the intended treatment plan. In recent years, digital technology has increasingly permeated orthodontic clinical diagnosis and treatment, facilitating clinical decision-making, treatment planning, and follow-up monitoring. This review summarizes recent advancements in digital technology for monitoring orthodontic tooth movement, related complications, and appliance-wearing compliance. It aims to provide insights for researchers and clinicians to enhance the application of digital technology in orthodontics, improve treatment outcomes, and optimize patient experience. The digitization of diagnostic data and the visualization of dental models make chair-side follow-up monitoring more convenient, accurate, and efficient. At the same time, the emergence of remote monitoring technology allows orthodontists to promptly identify oral health issues in patients and take corresponding measures. Furthermore, the multimodal data fusion method offers valuable insights into the monitoring of the root-alveolar relationship. Artificial intelligence technology has made initial strides in automating the identification of orthodontic tooth movement, associated complications, and patient compliance evaluation. Sensors are effective tools for monitoring patient adherence and providing data-driven support for clinical decision-making. The application of digital technology in orthodontic monitoring holds great promise. However, challenges like technical bottlenecks, ethical considerations, and patient acceptance remain.