With the widespread use of antibiotics, drug-resistant bacterial infections have become a significant threat to human health. Finding new antibacterial strategies that can effectively control drug-resistant bacterial infections has become an urgent task. Unlike small molecule drugs that target bacterial proteins, antisense oligonucleotide (ASO) can target genes related to bacterial resistance, pathogenesis, growth, reproduction and biofilm formation. By regulating the expression of these genes, ASO can inhibit or kill bacteria, providing a novel approach for the development of antibacterial drugs. To overcome the challenge of delivering antisense oligonucleotide into bacterial cells, various drug delivery systems have been applied in this field, including cell-penetrating peptides, lipid nanoparticles and inorganic nanoparticles, which have injected new momentum into the development of antisense oligonucleotide in the antibacterial realm. This review summarizes the current development of small nucleic acid drugs, the antibacterial mechanisms, targets, sequences and delivery vectors of antisense oligonucleotide, providing a reference for the research and development of antisense oligonucleotide in the treatment of bacterial infections.

This study investigated the effect of different carrier materials on the in vitro properties of progesterone solid dispersions. The solid dispersions of the insoluble drug progesterone were prepared by hot melt extrusion technique using rheological properties as the index of investigation, and the in vitro properties of the solid dispersions were characterized. Scanning electron microscope revealed solid dispersions with rough surfaces and agglomerated microstructures into irregular lumpy particles. Differential scanning calorimetry and powder X-ray diffraction showed the change of progesterone crystalline form in solid dispersions from crystalline to amorphous state. In vitro dissolution studies showed that solid dispersions prepared with different carrier materials can effectively improve the dissolution rate of drugs. The results of the study showed that the type of carrier material had a significant effect on the in vitro properties of solid dispersions, providing a reference for the study of solid dispersions in the controlled release of insoluble drugs.

Needle-free injection technology (NFIT) refers to the drug delivery systems in which drugs are propelled as high-speed jet streams using any of the pressure source to penetrate the skin to the required depth. NFIT is a promising drug delivery system as it enables the injection of liquids, powders, and depot/projectiles, and has the advantages of preventing needle stick accidents, improving drug bioavailability, eliminating needle-phobia, increasing vaccine immunity, simplifying operations and is convenient for patients to use. NFIT and its research background, the structure and classification of needle-free jet injectors (NFJI), drugs that can be delivered using NFJI and the factors affecting the injection effect are comprehensively reviewed in this paper. The limitations and potential development directions are summarized to provide a theoretical basis for the application and development of NFIT.

MADS-box protein family are important transcriptional regulatory factors in plant growth and development. The AGAMOUS 12 (AGL12) subfamily is believed to play an important regulatory role in the process of plant flowering transition. To explore the potential mechanism of AGL12 subfamily involved in regulating the flower development of Lonicera macranthoides, quantitative real-time polymerase chain reaction (qRT-PCR), prokaryotic expression and yeast two-hybrid techniques were used to analyze the expression pattern, protein expression, and protein-protein interaction pattern of LmAGL12 based on transcriptome data. The results showed that the LmAGL12 gene contains a 603 bp open reading frame (ORF), encoding 200 amino acids, and the encoded protein was stable and hydrophilic without a transmembrane region and signal peptide. Through homologous sequence alignment and phylogenetic analysis, it was confirmed that LmAGL12 protein belongs to the MADS-box protein family and is closely related to the AGL12 protein of Heracleum sosnowskyi and Daucus carota subsp. sativus. The LmAGL12 gene was cloned into prokaryotic expression vector pET-28a and the recombinant constructs were transformed into Escherichia coli BL21 (DE3), which inducing the target protein successfully. The yeast two-hybrid results showed that LmAGL12 protein interacts with LmSVP protein, LmSOC1 protein and LmAP1 protein, respectively. The qRT-PCR results showed that LmAGL12 gene were differentially expressed in different development stages of flower bud, stem, and leaves of 'Longhua' and 'Baiyun' in L. macranthoides. The LmAGL12 gene showed the highest expression level in the middle stage of the 'Longhua' floral bud; For the 'Baiyun' variety, the relative expression level of LmAGL12 gene is the highest in the stem. This study cloned the LmAGL12 gene in L. macranthoides and analyzed it expression for the first time, enriching the research on flower organ development and providing a research basis for further exploring the molecular mechanisms of long bud stage and non-unfolded corolla in L. macranthoides, as well as for variety improvement.

DNA origami is a powerful technique for generating nanostructures with dynamic properties and intelligent controllability. The precise geometric shapes, high programmability, and excellent biocompatibility make DNA origami nanostructures an emerging drug delivery vehicle. The shape, size of the carrier material, as well as the loading and release of drugs are important factors affecting the bioavailability of drugs. This paper focuses on the controllable design of DNA origami nanostructures, efficient drug loading, and intelligent drug release. It summarizes the cutting-edge applications of DNA origami technology in biomedicine, and discusses areas where researchers can contribute to further advancing the clinical application of DNA origami carriers.

Orodispersible films (oral dispersible films), a novel form of oral solid dosage forms, are widely used for patients with dysphagia and those with uncontrollable autonomic behavior. In this study, suvorexant orodispersible film was prepared by hot melt extrusion technology, and the disintegration time, mechanical properties, in vitro dissolution and pharmacokinetics were evaluated, compared with other orodispersible films and commercially available tablets Belsomra. All experiments were approved by the Committee on the Management and Use of Laboratory Animals of Academy of Military Medical Sciences (IACUC-DWZX-2024-504). The results showed that the dissolution rate of suvorexant orodispersible film was faster and the mechanical strength was better than that of other commercially available orodispersible film, which could meet the needs of storage and transportation. Differential scanning calorimetry and X-ray diffraction results showed that suvorexant was dispersed within the orodispersible film in an amorphous state. The in vitro dissolution of the film was observed to be four times faster than that of the commercial tablets, achieving complete dissolution within five minutes. Pharmacokinetic evaluations in Beagle dogs revealed that the self-formulated orodispersible film exhibited no significant differences in the area under the blood concentration-time curve when compared with Belsomra. However, the film showed a faster onset of action, with a peak time that was twice as rapid, and a maximum blood concentration that was twice as high as that of Belsomra. Leveraging hot melt extrusion technology, the suvorexant orodispersible film offers a straightforward, continuous production process with consistent quality. It serves as an excellent platform for the development of solvent-free film preparations tailored for patients with special needs.

The rheological properties of drug and carrier materials have a wide range of guiding significance for the formulation and process development of solid dispersions. In this study, the rheological properties of materials with different drug carrier ratios were systematically studied with suvorexant as the model drug and copovidone as the carrier material, which provided a sufficient basis for determining the formulation and process of solid dispersions. The optimal suvorexant-copovidone ratio obtained by oscillating temperature scanning was 1∶4. If the ratio is greater than 1∶ 4, the glass transformation temperature of the material will increase significantly, and the solubilization effect of the solid dispersion will show a downward trend. The results of oscillation temperature scanning and oscillation temperature sweep can show that when the extrusion temperature is greater than 150 ℃, the viscosity of the material is less than 10 000 Pa·s, and the melt can be extruded smoothly, and the best extrusion temperature of 160-180 ℃ can be obtained by combining the dissolution results. Finally, the dissolution of suvorexant tablets guided by rheological property studies in multiple media is similar to that of the commercially available tablets Belsomra. Therefore, rheological studies can screen and optimize the formulation and process of suvorexant solid dispersions at the mechanism level, which is of great significance to improve the success rate of R&D and shorten the R&D cycle of solid dispersions prepared by hot melt extrusion.

Bitter taste in the mouth is a prevalent clinical symptom that refers to a spontaneous bitterness in the mouth after excluding external factors such as diet,and belongs to the phantogeusia of dysgeusia.The etiology and mechanism of bitter taste in the mouth re-main unclear.Studies have shown that bitter taste in the mouth is mainly associated with multiple factors such as diseases,medications and nutrition.In addition,effective and reliable treatments have also not yet been developed.This paper reviews the latest research ad-vances in the etiology,mechanism and treatment of bitter taste in the mouth,with the aim of providing reference for the clinical man-agement of patients with mouth bitterness.

Objective To design a novel oxygenator to solve the existing problems of extracorporeal membrane oxygenation(ECMO)machine in high transmembrane pressure difference,low efficiency of blood oxygen exchange and susceptibility to thrombosis.Methods The main body of the oxygenator vascular access flow field was gifted with a flat cylindrical shape.The topology of the vascular access was modeled in three dimensions,and the whole flow field was cut into a blood inlet section,an inlet buffer,a heat exchange zone,a blood oxygen exchange zone,an outlet buffer and a blood outlet section.The oxygenator was compared with Quadrox oxygenator by means of ANSYS FLUENT-based simulation and prototype experiments.Results Simulation calculations showed the oxygenator designed was comparable to the clinically used ones in general,and gained advantages in transmembrane pressure difference,blood oxygen exchange and flow uniformity.Experimental results indicated that the oxygenator behaved better than Quadrox oxygenator in transmembrane pressure difference and blood oxygen exchange.Conclusion The oxygenator has advantages in transmem-brane pressure difference,temperature change,blood oxygen ex-change and low probability of thrombosis.[Chinese Medical Equipment Journal,2024,45(3):23-28]

Objective:To investigate the expression of N6-methyladenosine(m6A) modification-related genes and their possible roles in peripheral blood mononuclear cells (PBMCs) of patients with primary gouty arthritis (GA).Methods:Forty-five patients each with acute gout (AG), intermittent gout (IG), and age-and gender-matched healthy controls (HC) were collected from the outpatient clinic of the Department of Rheumatology and Immunology of the Affiliated Hospital of Chuanbei Medical College between October and December of 2023. The expression levels of m6A modification-related genes (METTL3、METTL14、WTAP、FTO、ALKBH5、IGF2BP2、IGF2BP3、YTHDF1、YTHDC2) in PBMCs among the 3 groups were detected by RT-qPCR and correlation analysis with clinical indicators was performed. Measurements conforming to normal distribution were analyzed using ANOVA or t-tests, and data were analyzed using the Kruskal-Wallis H-test and Mann-Whitney U-test for data that is not-normaly distributed. The value of m6A modification-related genes for the diagnosis of GA was evaluated using subject characterization curve ROC. Results:①There were statistically significant differences in the expression of IGF2BP2 ( Z=-3.59, P<0.001)、WTAP ( Z=-5.25, P<0.001)、METTL14 ( Z=-3.62, P<0.001)、YTHDF1 ( Z=-2.12, P=0.034)and YTHDC2 ( Z=-2.00, P=0.045) in the disease group and the normal control group. Among them, the expression of IGF2BP2 in the GA group [28.08 (17.99, 47.06)×10 -4] was significantly higher than that in the HC group [19.23 (12.90, 25.78)×10 -4], and the expressions of WTAP、METTL14、YTHDF1 and YTHDC2 in the GA group [298.61 (213.61, 377.80)×10 -4, 9.94 (6.43, 13.46)×10 -4, 52.63 (28.22, 72.77)×10 -4, 40.24 (20.74, 73.32)×10 -4] were significantly lower than those in the HC group [398.45(339.88, 454.89)×10 -4, 13.27(11.07, 15.85)×10 -4, 64.43(43.61, 87.10)×10 -4, 53.11(36.37, 79.28)×10 -4]. Further subgroup analysis revealed statistically significant differences in the expression of IGF2BP2、WTAP、METTL14、YTHDF1 and YTHDC2 among the 3 groups ( H=19.62、31.73、13.14、16.64、28.90, all P≤0.001). The expressions of WTAP and METTL14 in the AG group [311.13(234.96, 426.67)×10 -4, Z=-3.27, P=0.001; 9.64 (5.21, 15.21)×10 -4, Z=-2.71, P=0.008] and IG group [272.27 (203.29, 347.95)×10 -4, Z=-5.78, P<0.001; 10.40(6.88, 12.88)×10 -4, Z=-3.54, P=0.003] were lower than those in the HC group [398.45 (339.88, 454.89)×10 -4, 13.27(11.07, 15.85)×10 -4]. However, there was no significant difference between AG and IG group ( P>0.05). Both YTHDF1 and YTHDC2 were significantly lower in the AG group [38.10(16.19, 56.78)×10 -4, 24.31 (14.35, 42.77)×10 -4] than those in the IG group [64.13 (48.28, 74.40)×10 -4(Z=-3.54, P<0.001, 65.49 (39.89, 91.23)×10 -4(Z=-4.96, P<0.001)] and HC group [64.43 (43.61, 86.92)×10 -4(Z=-3.51, P<0.001), 53.11 (36.37, 79.28)×10 -4(Z=-4.25, P<0.001)]. But there was no statistically significant difference between IG and HC groups ( P>0.05); IGF2BP2 was significantly lower in the AG group [25.32(16.40, 40.43)×10 -4, Z=-2.46, P=0.014] and HC group [19.23 (12.90, 25.78)×10 -4, Z=-4.54, P<0.001] than in the IG group [31.10(22.60, 49.58)×10 -4], but the comparison between AG and HC showed no statistically significant difference( P>0.05). ②Spearman correlation analysis showed that in GA patients, the expression of IGF2BP2、METTL14 and YTHDF1 was positively correlated with plasma glucose、blood uric acid(sUA) and total cholesterol level respectively ( r=0.22, P=0.037; r=0.38, P=0.003; r=0.23, P=0.034), and WTAP was negatively correlated with GLU ( r=-0.25, P=0.020). ③The ROC curve for the joint prediction of the five differential genes showed that the 95% CI for area under the curve in GA was 0.90 (0.84, 0.95). Conclusion:The m6A modification-related genes are abnormally expressed in GA and are correlated with clinical indicators such as GLU and UA, which are hypothesized to be involved in the pathogenesis of GA and have a certain reference value for the evaluation of metabolism in GA patients.