ObjectiveTo establish a model that can quickly identify the aroma components in different parts of Nardostachys jatamansi， so as to provide a quality control basis for the market circulation and clinical use of N. jatamansi. MethodsHeadspace solid-phase microextraction-gas chromatography-mass spectrometry（HS-SPME-GC-MS） combined with Smart aroma database and National Institute of Standards and Technology（NIST） database were used to characterize the aroma components in different parts of N. jatamansi， and the aroma components were quantified according to relative response factor（RRF） and three internal standards， and the markers of aroma differences in different parts of N. jatamansi were identified by orthogonal partial least squares-discriminant analysis（OPLS-DA） and cluster thermal analysis based on variable importance in the projection（VIP） value >1 and P<0.01. The odor data of different parts of N. jatamansi were collected by Heracles Ⅱ Neo ultra-fast gas phase electronic nose， and the correlation between compound types of aroma components collected by the ultra-fast gas phase electronic nose and the detection results of HS-SPME-GC-MS was investigated by drawing odor fingerprints and odor response radargrams. Chromatographic peak information with distinguishing ability≥0.700 and peak area≥200 was selected as sensor data， and the rapid identification model of different parts of N. jatamansi was established by principal component analysis（PCA）， discriminant factor alysis（DFA）， soft independent modeling of class analogies（SIMCA） and statistical quality control analysis（SQCA）. ResultsThe HS-SPME-GC-MS results showed that there were 28 common components in the underground and aboveground parts of N. jatamansi， of which 22 could be quantified and 12 significantly different components were screened out. Among these 12 components， the contents of five components（ethyl isovalerate， 2-pentylfuran， benzyl alcohol， nonanal and glacial acetic acid，） in the aboveground part of N. jatamansi were significantly higher than those in the underground part（P<0.01）， the contents of β-ionone， patchouli alcohol， α-caryophyllene， linalyl butyrate， valencene， 1，8-cineole and p-cymene in the underground part of N. jatamansi were significantly higher than those in the aboveground part（P<0.01）. Heracles Ⅱ Neo electronic nose results showed that the PCA discrimination index of the underground and aboveground parts of N. jatamansi was 82， and the contribution rates of the principal component factors were 99.94% and 99.89% when 2 and 3 principal components were extracted， respectively. The contribution rate of the discriminant factor 1 of the DFA model constructed on the basis of PCA was 100%， the validation score of the SIMCA model for discrimination of the two parts was 99， and SQCA could clearly distinguish different parts of N. jatamansi. ConclusionHS-SPME-GC-MS can clarify the differential markers of underground and aboveground parts of N. jatamansi. The four analytical models provided by Heracles Ⅱ Neo electronic nose（PCA， DFA， SIMCA and SQCA） can realize the rapid identification of different parts of N. jatamansi. Combining the two results， it is speculated that terpenes and carboxylic acids may be the main factors contributing to the difference in aroma between the underground and aboveground parts of N. jatamansi.

Electroencephalogram (EEG) is a non-invasive, high temporal-resolution technique for monitoring brain activity. However, affected by the volume conduction effect, EEG has a low spatial resolution and is difficult to locate brain neuronal activity precisely. The surface Laplacian (SL) technique obtains the Laplacian EEG (LEEG) by estimating the second-order spatial derivative of the scalp potential. LEEG can reflect the radial current activity under the scalp, with positive values indicating current flow from the brain to the scalp (“source”) and negative values indicating current flow from the scalp to the brain (“sink”). It attenuates signals from volume conduction, effectively improving the spatial resolution of EEG, and is expected to contribute to breakthroughs in neural engineering. This paper provides a systematic overview of the principles and development of SL technology. Currently, there are two implementation paths for SL technology: current source density algorithms (CSD) and concentric ring electrodes (CRE). CSD performs the Laplace transform of the EEG signals acquired by conventional disc electrodes to indirectly estimate the LEEG. It can be mainly classified into local methods, global methods, and realistic Laplacian methods. The global method is the most commonly used approach in CSD, which can achieve more accurate estimation compared with the local method, and it does not require additional imaging equipment compared with the realistic Laplacian method. CRE employs new concentric ring electrodes instead of the traditional disc electrodes, and measures the LEEG directly by differential acquisition of the multi-ring signals. Depending on the structure, it can be divided into bipolar CRE, quasi-bipolar CRE, tripolar CRE, and multi-pole CRE. The tripolar CRE is widely used due to its optimal detection performance. While ensuring the quality of signal acquisition, the complexity of its preamplifier is relatively acceptable. Here, this paper introduces the study of the SL technique in resting rhythms, visual-related potentials, movement-related potentials, and sensorimotor rhythms. These studies demonstrate that SL technology can improve signal quality and enhance signal characteristics, confirming its potential applications in neuroscientific research, disease diagnosis, visual pathway detection, and brain-computer interfaces. CSD is frequently utilized in applications such as neuroscientific research and disease detection, where high-precision estimation of LEEG is required. And CRE tends to be used in brain-computer interfaces, that have stringent requirements for real-time data processing. Finally, this paper summarizes the strengths and weaknesses of SL technology and envisages its future development. SL technology boasts advantages such as reference independence, high spatial resolution, high temporal resolution, enhanced source connectivity analysis, and noise suppression. However, it also has shortcomings that can be further improved. Theoretically, simulation experiments should be conducted to investigate the theoretical characteristics of SL technology. For CSD methods, the algorithm needs to be optimized to improve the precision of LEEG estimation, reduce dependence on the number of channels, and decrease computational complexity and time consumption. For CRE methods, the electrodes need to be designed with appropriate structures and sizes, and the low-noise, high common-mode rejection ratio preamplifier should be developed. We hope that this paper can promote the in-depth research and wide application of SL technology.

The chemical constituents from the n-butanol fraction of ethanol extract of safflower (Carthamus tinctorius L.) were isolated and purified using chromatographic process including MCI Gel CHP-20, ODS, Sephadex LH-20 column chromatography, and semi-preparative HPLC method, and one alkyne and two phenylpropanoid derivants were obtained. Their structures were identified as (5R,E)-tetradecane-12-ene-8,10-diyne-1,5,14-triol (1), (E)-8-O-β-D-glucopyranosyl n-butyl cinnamate (2), and (7S,8S)-7-(4-hydroxy-3-methoxybenzene)-7-butyl-8,9-diol (3) by modern spectroscopy methods (1D NMR, 2D NMR, UV, IR and MS). 1-3 are all new compounds. Compounds 1-3 were screened for their anti-renal fibrosis activities in vitro, and none of them showed obvious effect.

Nine compounds were isolated and purified from 90% ethanol extract of Alstonia mairei Lévl by using various chromatographic methods, including silica gel, SephadexLH-20, MCI Gel and ODS column chromatography, combined with semi-preparative liquid phase separation methods. Modern spectroscopic methods (1D and 2D NMR, UV, IR, MS, etc.) were used to identify the structures of the isolated compounds. They were identified as mairoside A (1), 3′,6-di-O-sinaloylsucrose (2), myristic acid (3), methyl myristate (4), ethyl myristate (5), 3,4,5-trimethoxycinnamic acid (6), 3,4,5-trimethoxybenzoic acid (7), vinoline (8), kaempferol-3-O-rutinoside (9), among which compound 1 is a new glycoside, compounds 4 and 5 are new natural products, and the nuclear magnetic data of compound 4 were reported for the first time.

Background The positive rate of work-related musculoskeletal disorders (WMSDs) among coal mine workers remains high, which seriously affects the quality of life of the workers. Objective To estimate the prevalence of WMSDs among coal miners in Shanxi Province and analyze their influencing factors. Methods From May to December 2023, 2315 coal miners from a coal mine enterprise inShanxi Province were selected by convenience sampling, and the self-administered Basic Situation Survey Scale, Musculoskeletal Disorders Questionnaire, Effort-Reward Imbalance Questionnaire, and Pittsburgh Sleep Quality Scale were used to evaluate general demographic characteristics, work organization characteristics, living habits, sleep quality, occupational stress, and occurrence of WMSDs symptoms and the corresponding absences (sickness absence) in past 1 year. The positive rate and absenteeism rate of WMSDs were caculated, and Pearson's chi-square test was used for identify influencing factors of WMSDs, and finally a binary logistic regression method was used to further studying the factors. Results A total of 2577 questionnaires were distributed in this survey, and 2315 valid questionnaires were recovered, with an effective recovery rate of 89.9%. The positive rate of WMSDs symptoms was 48.7% (1127/2315), the absenteeism rate due to WMSDs was 22.6% (523/2315), and the waist (17.5%), neck (11.7%), and knee (9.0%) were the most common areas presenting WMSDs symptoms. The results of logistic regression showed that compared with ≤10 years of service, the risk of WMSDs was higher for those with > 20 years of service (OR=2.167, 95%CI: 1.419, 3.311). Compared with the daily working time of ≤8 h, the risk of WMSDs was higher for those >8 h daily working time (OR=1.463, 95%CI: 1.211, 1.767). A higher risk of WMSDs was reported in workers with moderate labor intensity (OR=1.247, 95%CI: 1.009, 1.542) or heavy labor intensity (OR=1.570, 95%CI: 1.215, 2.027) than those with light labor intensity. The higher the education level (OR _{high school and technical secondary school}=1.866, 95%CI: 1.435, 2.425; OR _{junior college/bachelor degree or above}=1.953, 95%CI: 1.445, 2.639), the higher the risk of WMSDs. The risk of WMSDs was higher in workers reporting smoking (OR=1.225, 95%CI: 1.021, 1.470) or alcohol consumption (OR=1.345, 95%CI: 1.122, 1.612). The risk of WMSDs in coal miners with high occupational stress (OR=1.229, 95%CI:1.030, 1.466) or those with sleep disorders (OR=3.616, 95%CI:2.824, 4.629) was higher than that in workers with low occupational stress or no sleep disorders respectively. Conclusion The positive rate of WMSDs among coal mine personnel in Shanxi Province is high, and education level, length of service, daily working hours, smoking, alcohol consumption, labor intensity, sleep disorders, and occupational stress are influencing factors for WMSDs.

OBJECTIVE To summarize the effective measures and implementation effects of Australia in improving drug accessibility， and provide reference for the optimization and promotion of drug accessibility policies in China. METHODS By searching the official website of the Australian Federal Government and relevant literature， this study introduced Australia’s practical experiences in the Pharmaceutical Benefits Scheme （PBS）， drug registration and PBS access， drug pricing and procurement policies， generic drug price competition and disclosure， and orphan drug registration and approval policies. It summarized the effective measures taken by the federal government to improve drug accessibility and control drug expenditure. RESULTS & CONCLUSIONS The good management collaboration mechanism， flexible drug price negotiation system， and comprehensive drug accessibility policy support system of the Australian health system have maintained a good balance between drug accessibility， patient burden， and government subsidies in the long run， effectively ensuring the accessibility of Australian drugs. It is recommended that our country strengthen policy coordination and departmental cooperation in terms of drug accessibility， optimize the registration and accelerated approval process for new drugs， improve the price management and negotiation mechanism， and establish a comprehensive drug accessibility support system.

Clinical practice guidelines represent the best recommendations for patient care. They are developed through systematically reviewing currently available clinical evidence and weighing the relative benefits and risks of various interventions. However, clinical practice guidelines have to go through a long translation cycle from development and revision to clinical promotion and application, facing problems such as scattered distribution, high duplication rate, and low actual utilization. At present, the clinical practice guideline information platform can directly or indirectly solve the problems related to the lengthy revision cycles, decentralized dissemination and limited application of clinical practice guidelines. Therefore, this paper systematically examines different types of clinical practice guideline information platforms and investigates their corresponding challenges and emerging trends in platform design, data integration, and practical implementation, with the aim of clarifying the current status of this field and providing valuable reference for future research on clinical practice guideline information platforms.

BACKGROUND:Psoralen has a strong anti-osteoporotic activity and may have a restorative effect on chemotherapy-induced osteoporosis. OBJECTIVE:To explore the restorative effect of psoralen on the osteogenic differentiation of bone marrow mesenchymal stem cells in mice inhibited by cyclophosphamide and its mechanism. METHODS:C57BL/6 mouse bone marrow mesenchymal stem cells were isolated and cultured.Effect of psoralen on viability of bone marrow mesenchymal stem cells was detected by MTT assay.Osteogenic induction combined with alkaline phosphatase staining was used to determine the optimal dose of psoralen to restore the osteogenic differentiation of bone marrow mesenchymal stem cells inhibited by cyclophosphamide.The mRNA expression levels of Runx2,alkaline phosphatase,Osteocalcin,osteoprotegerin,and Wnt/β-catenin signaling pathway-related genes Wnt1,Wnt4,Wnt10b,β-catenin,and c-MYC were measured by RT-qPCR at different time points under the intervention with psoralen.The protein expression of osteogenic specific transcription factor Runx2 and Wnt/β-catenin signaling pathway related genes Active β-catenin,DKK1,c-MYC,and Cyclin D1 was determined by western blot assay at different time points under the intervention with psoralen. RESULTS AND CONCLUSION:(1)There was no significant effect of different concentrations of psoralen on the viability of bone marrow mesenchymal stem cells.The best recovery of the inhibition of osteogenic differentiation of bone marrow mesenchymal stem cells caused by cyclophosphamide was under the intervention of psoralen at a concentration of 200 μmol/L.(2)Psoralen reversed the reduction in osteogenic differentiation marker genes Runx2,alkaline phosphatase,Osteocalcin and osteoprotegerin mRNA expression and Runx2 protein expression in bone marrow mesenchymal stem cells caused by cyclophosphamide conditioned medium.(3)Psoralen reversed the decrease in Wnt/β-catenin pathway-related genes Wnt4,β-catenin,c-MYC mRNA and Active β-catenin,c-MYC,and Cyclin D1 protein expression and the increase in DKK1 protein expression in bone marrow mesenchymal stem cells caused by cyclophosphamide conditioned medium.(4)The results showed that cyclophosphamide inhibited osteogenic differentiation of bone marrow mesenchymal stem cells in mice,and psoralen had a restorative effect on it.The best intervention effect was achieved at a concentration of 200 μmol/L psoralen,and this protective effect might be related to the activation of Wnt4/β-catenin signaling pathway by psoralen.

BACKGROUND:Periprosthetic fracture of the femoral of the knee after total knee arthroplasty is one of the common complications,and there is a lack of biomechanical research on the periprosthetic fractures of the femoral of the knee under different bone strength conditions.The three-dimensional finite element analysis can provide a biomechanical basis for clinical practice. OBJECTIVE:To investigate the biomechanical changes of anterior femoral notching after total knee arthroplasty under different bone strengths,and to provide a mechanical basis for the clinical prevention of supracondylar femoral periprosthetic fractures after knee arthroplasty. METHODS:The femoral CT data of healthy adults were obtained,and the three-dimensional model of femoral lateral replacement of the knee joint was established by Mimics,Geomagic studio,and Solidworks software.Anterior femoral notching models of different depths were constructed,and the models were imported into ANSYS software to analyze the changes of biological stress on the femoral condyle with different bone strengths and different anterior femoral notching depths.The stress changes of the femoral anterior condyle section after and before the filling of anterior femoral notching with bone cement were analyzed. RESULTS AND CONCLUSION:(1)Under any bone strength,the supracondylar stress increased with the depth of anterior femoral notching.In normal bone conditions,there was a stress abrupt change point when the anterior femoral notching depth was between 3 mm and 4 mm.In the case of osteoporosis,there was a stress abrupt point when the anterior femoral notching depth was between 2 mm and 3 mm.(2)When anterior femoral notching occurred during knee arthroplasty and the depth exceeded the thickness of the bone cortex,the supracondylar stress of the femoral gradually increased as the bone strength decreased.(3)The stress of the anterior femoral condyle section decreased when the model with an anterior femoral notching depth of 3 mm was filled with bone cement.(4)The results show that anterior femoral notching should be avoided during knee arthroplasty,especially in patients with osteoporosis.If anterior femoral notching occurs during surgery,bone cement can be used to evenly fill the anterior femoral notching to reduce the supracondylar stress of the femur and reduce the incidence of periprosthetic fractures of the femoral joint

This article takes the award-winning traditional Chinese medicine（TCM） patents in the China Patent Award as the breakthrough point to analyze the innovative research progress and achievements of TCM in the past thirty years， such as type of patentees， geographical distribution， technology types， international layout and textual features. The China Patent Award has been selected for 24 sessions so far， with 192 patents awarded for TCM， accounting for 2.3% of the total number of awarded patents. Among the award-winning patents of TCM， the patentees are mainly enterprises， and the active geographic regions of TCM innovation include Guangdong， Shandong， Guangxi， Guizhou， Jiangsu and other provinces. The types of award-winning patents mainly focus on TCM compositions， followed by preparation methods and new applications. The main clinical applications include cardiovascular and cerebrovascular diseases， respiratory system diseases and orthopedic diseases. However， there is still much room for improvement in the international layout， and the quality of text has been steadily improving year by year. Obviously， award-winning patents represent a high level in various aspects， including patent quality， technology advancement， protection strength and social benefits. This article analyzes the overall situation of patent awards in TCM， and discusses the gold award-winning patented technologies， the preparation method of HuoXiang Zhengqi liquid oral preparation（CN911072543） and a method of preparing anti-cancer drug elemene from Curcuma wenyujin（CN200910162658.1）， as representative technologies of TCM compounds and extracts， respectively， providing references for future innovation and intellectual property protection related to TCM.