ObjectiveTo observe and compare the effects of different concentrations of cyclophosphamide (CTX) in inducing premature ovarian insufficiency (POI) model in mice and investigate the mechanism of injury. MethodsThirty-two 6~8-week-old female C57BL/6J mice were randomly divided into four groups (n=8 per group) using a weight-based block randomization method. The POI model was established via a single intraperitoneal injection of 75 mg/kg cyclophosphamide (CTX), 120 mg/kg CTX, 120 mg/kg CTX + 12 mg/kg Busulfan, or an equivalent volume of normal saline (control). Ovarian coefficients, serum estradiol (E₂) and follicle-stimulating hormone (FSH) levels were measured. Western blotting was performed to assess changes in ovarian expression levels of NAD-dependent deacetylase sirtuin-5 (SIRT5) and forkhead box O3a (FOXO3a) under different modeling conditions. After determining the optimal CTX concentration for modeling, an additional forty 6~8-week-old femal C57BL/6J mice were randomly divided into five groups (n=8 per group) using a weight-based block randomization method: saline control, 120 mg/kg CTX sampling at 1, 2, 7, or 14 days after modeling. Western blotting was used to evaluate temporal changes of ovarian SIRT5 and FOXO3a protein expression. ResultsCompared with the saline control, all concentrations of CTX (75 mg/kg CTX, 120 mg/kg CTX) and 120 mg/kg CTX + 12 mg/kg Busulfan induced POI injury in mice. The 120 mg/kg CTX group exhibited smaller changes in ovarian coefficients (P<0.001) and E₂ levels (P<0.05), whereas the 120 mg/kg CTX + 12 mg/kg Busulfan group showed rough and reduced luster fur, sluggish response and was in the worst state. Compared with the saline control group, FOXO3a expression was significantly down-regulated (P<0.05), while SIRT5 remained unchanged in the 75 mg/kg CTX group (P>0.05). In contrast, both SIRT5 (P<0.05) and FOXO3a (P<0.05) were significantly down-regulated in the 120 mg/kg CTX group. Further analysis revealed that on day 2 and 7 after 120 mg/kg CTX modeling, the expressions of SIRT5 (P<0.01) and FOXO3a (P<0.001) were significantly down-regulated, with the largest decrease observed on day 7 (SIRT5, P<0.000 1; FOXO3a, P<0.000 1). ConclusionOvarian injury in the POI model induced by 120 mg/kg CTX is milder than that in the POI model induced by 75 mg/kg CTX. Moreover, the expression changes of SIRT5 and FOXO3a are most significant on day 7 after modeling induced by 120 mg/kg CTX, which may be related to the inhibition of the SIRT5-FOXO3a signaling pathway.

[This corrects the article DOI: 10.1016/j.apsb.2022.05.019.].

Objective : To explore the mechanism of proliferation of gastric cancer cells induced byHelicobacter pylori(Hp) from the perspective of the mitochondrial unfolded protein response(UPRMT). Methods : C57BL6/J mice, human gastric cancer cells AGS and SGC-7901 cells were infected with Hp, mitochondrial proteins were extracted, and the expressions of UPRMT, including activation of transcription factor 5(ATF5), heat shock protein 60(mtHSP60), heat shock protein 70(mtHSP70) and mitochondrial protease(ClpP), were detected by Western blot. Immunohistochemistry was used to locate the expression sites of 4 proteins in mouse gastric tissue. AGS and SGC-7901 cells were infected with Hp, and cell proliferation was detected by RTCA and CCK-8. Finally, the expression of four indexes in gastric cancer tissues was analyzed by TCGA samples in the UALCAN database. Results : Hp infection could significantly promote the expression of ATF5, mtHSP60, mtHSP70 and ClpP in the mitochondria of gastric epithelial cells of C57BL6/J mice, AGS and SGC-7901 cells, and promote the proliferation of gastric cancer cells. When compared to normal gastric tissues in TCGA samples, ATF5, mtHSP60, mtHSP70, and ClpP were highly expressed in gastric cancer tissues, with statistically significant difference(allP<0.01). Conclusion Hp infection can induce UPRMTin gastric epithelial cells and gastric cancer cells, which in turn promotes cell proliferation.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Objective:To compare the efficacy of maxillary distraction osteogenesis (DO) and Le FortⅠ osteotomy (LFⅠ) in patients with complex cleft lip and palate.Methods:A retrospective study was conducted, clinical data were collected involving patients with complex cleft lip and palate who required combined orthodontic and orthognathic treatment and were treated at the Stomatological Hospital of Chongqing Medical University from January 2015 to December 2022. Patients were divided into three groups based on the surgical method used for the maxilla: total maxillary distraction (TMD, group A), anterior maxillary distraction (AMD, group B), and Le Fort Ⅰ osteotomy (LFⅠ, group C). Cone-beam CT scans and lateral cephalograms were obtained preoperatively and at 3 months postoperatively. Three-dimensional reconstructions were performed using Mimics 21.0 and Dolphin Imaging 11.9 software to evaluate changes in craniofacial morphology and airway. Data analysis was conducted using SPSS 25.0. Intragroup comparisons before and after surgery were performed using the Wilcoxon rank sum test, and intergroup comparisons among the three groups were conducted using the Kruskal-Wallis H test. Results:A total of 15 patients were included, with 5 patients in each group. The cohort comprised 8 males and 7 females, aged between 15 and 21 years. There were no statistically significant differences in the distribution of gender, age, or cleft lip and palate classification among the three groups ( P>0.05). Postoperatively, all three groups showed improvement in maxillary hypoplasia. Compared to preoperative measurements, the angle formed by the points A (subspinale), N (nasion), and B (supramentale) (ANB angle) increased in all three groups (all P<0.05). The vertical distance from point A to the nasion perpendicular (A-Nperp) increased in groups A and B ( P<0.05 for both) but not in group C ( P>0.05). The area of the alveolar gap showed an increasing trend in all three groups ( P>0.05). The mandibular plane angle (FMA) decreased postoperatively in group B but showed an increasing trend in the other two groups, though the differences were not statistically significant ( P>0.05). Postoperative airway volume increased or showed an increasing trend in groups A ( P<0.05) and B ( P>0.05) but decreased in group C ( P>0.05). Intergroup comparisons showed significant differences in the angle formed by the sella (S), nasion (N), and point A (SNA angle) and the vertical distance from the anterior nasal spine to the coronal plane (ANS-CP) ( P<0.05). Group A had significantly larger SNA angles and ANS-CP values than group B, and the ANS-CP value in group A was significantly larger than in group C (all P<0.05). There were no other statistically significant differences among the groups ( P>0.05). Conclusion:For patients with severe maxillary hypoplasia due to complex cleft lip and palate, TMD can correct sagittal discrepancies between the upper and lower jaws, increase upper airway volume, but may potentially enlarge the alveolar gap area and increase vertical height of the maxilla. AMD result in less change in maxillary position compared to TMD and is mainly used for patients with severe maxillary dental crowding, needing increased arch length, having minor sagittal discrepancies, or with preexisting velopharyngeal dysfunction. LFⅠ result in changes in maxillary position similar to AMD but less than TMD, making it suitable for patients with moderate maxillary hypoplasia and mild maxillary dental crowding. The advantage of LFⅠ lies in its precise postoperative occlusal design and accurate three-dimensional movement of the jaw.

Objective:To explore the clinical phenotype and pathogenesis of a child with partial duplication in the long arm of chromosome 10 (10q), and conduct a review of relevant literature.Methods:A child presented at Lianyungang Maternal and Child Health Care Hospital in April 2018 for growth retardation, intellectual disability, and autism spectrum disorder (ASD) was selected as the study subject. Peripheral blood samples were collected from the child and his parents for G-banded chromosomal karyotyping analysis. Genomic DNA was also extracted for chromosomal microarray analysis (CMA). The clinical phenotype and relevant genes were searched in the Online Mendelian Inheritance in Man (OMIM) and the UK Database of Genomic Variation and Phenotype in Humans using Ensembl Resources (DECIPHER). The pathogenicity of chromosomal variation was analyzed based on guidelines from the American College of Medical Genetics and Genomics (ACMG). Relevant literature was searched from the CNKI, Wanfang Data, and PubMed databases by using keywords such as " 10q" " duplication" and " trisomy", with the time set as from the establishment of database to December 1, 2023. This study has been approved by the Medical Ethics Committee of the Lianyungang Maternal and Child Health Care Hospital (No. XM2023030).Results:The clinical phenotype of child had included growth retardation, intellectual disability, and ASD. G-banded chromosomal analysis suggested that the child has a karyotype of 46, XY, dup(10)(q23.31q24.33), whilst both of his parents were normal. CMA analysis of the child revealed that the child was arr[19]10q23.31q24.33(87603382_104948862)×3, with a 17.34 Mb duplication in the 10q23.31q24.33 region. Search of the OMIM database suggested that the duplicated segment has contained 171 genes associated with various diseases, and search of the DECIPHER database has identified cases with overlapping with the duplication. A search of the PubMed database has identified 2 publications involving 2 patients with chromosomal duplications overlapping the 10q23.31q24.33 region with a segment length of > 10 Mb. The 2 patients had mainly manifested growth retardation, intellectual disability, ASD, and facial and limb malformations. The main pathogenic genes had included PTEN, WNT8B, LZTS2, NFKB2, PAX2, KIF11, FRA10AC1, and CNNM2. No similar case was retrieved from the CNKI and Wanfang Data databases. Conclusion:The partial 10q duplication as a novel CNV involving genes such as PTEN and WNT8B probably underlay the growth retardation, intellectual disability and ASD in the child. This study has enriched the genotype-phenotype spectrum of patients with partial 10q23.31q24.33 duplications.

Thalamocortical circuitry has a substantial impact on emotion and cognition.Previous studies have demonstrated alterations in thalamocortical functional connectivity(FC),characterized by region-dependent hypo-or hyper-connectivity,among individuals with major depressive disorder(MDD).However,the dynamical reconfiguration of the thalamocortical system over time and potential abnormalities in dynamic thalamocortical connectivity associated with MDD remain unclear.Hence,we analyzed dynamic FC(dFC)between ten thalamic subregions and seven cortical subnetworks from resting-state functional magnetic resonance images of 48 patients with MDD and 57 healthy controls(HCs)to investigate time-varying changes in thalamocortical FC in patients with MDD.Moreover,dynamic laterality analysis was conducted to examine the changes in functional lateralization of the thalamocortical system over time.Correlations between the dynamic measures of thalamocortical FC and clinical assessment were also calculated.We identified four dynamic states of thalamocortical circuitry wherein patients with MDD exhibited decreased fractional time and reduced transitions within a negative connectivity state that showed strong correlations with primary cortical networks,compared with the HCs.In addition,MDD patients also exhibited increased fluctuations in functional laterality in the thalamocortical system across the scan duration.The thalamo-subnetwork analysis unveiled abnormal dFC variability involving higher-order cortical networks in the MDD cohort.Significant correlations were found between increased dFC variability with dorsal attention and default mode networks and the severity of symptoms.Our study comprehensively investigated the pattern of alteration of the thalamocortical dFC in MDD patients.The heterogeneous alterations of dFC between the thalamus and both primary and higher-order cortical networks may help characterize the deficits of sensory and cognitive processing in MDD.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Objective:To compare the efficacy of maxillary distraction osteogenesis (DO) and Le FortⅠ osteotomy (LFⅠ) in patients with complex cleft lip and palate.Methods:A retrospective study was conducted, clinical data were collected involving patients with complex cleft lip and palate who required combined orthodontic and orthognathic treatment and were treated at the Stomatological Hospital of Chongqing Medical University from January 2015 to December 2022. Patients were divided into three groups based on the surgical method used for the maxilla: total maxillary distraction (TMD, group A), anterior maxillary distraction (AMD, group B), and Le Fort Ⅰ osteotomy (LFⅠ, group C). Cone-beam CT scans and lateral cephalograms were obtained preoperatively and at 3 months postoperatively. Three-dimensional reconstructions were performed using Mimics 21.0 and Dolphin Imaging 11.9 software to evaluate changes in craniofacial morphology and airway. Data analysis was conducted using SPSS 25.0. Intragroup comparisons before and after surgery were performed using the Wilcoxon rank sum test, and intergroup comparisons among the three groups were conducted using the Kruskal-Wallis H test. Results:A total of 15 patients were included, with 5 patients in each group. The cohort comprised 8 males and 7 females, aged between 15 and 21 years. There were no statistically significant differences in the distribution of gender, age, or cleft lip and palate classification among the three groups ( P>0.05). Postoperatively, all three groups showed improvement in maxillary hypoplasia. Compared to preoperative measurements, the angle formed by the points A (subspinale), N (nasion), and B (supramentale) (ANB angle) increased in all three groups (all P<0.05). The vertical distance from point A to the nasion perpendicular (A-Nperp) increased in groups A and B ( P<0.05 for both) but not in group C ( P>0.05). The area of the alveolar gap showed an increasing trend in all three groups ( P>0.05). The mandibular plane angle (FMA) decreased postoperatively in group B but showed an increasing trend in the other two groups, though the differences were not statistically significant ( P>0.05). Postoperative airway volume increased or showed an increasing trend in groups A ( P<0.05) and B ( P>0.05) but decreased in group C ( P>0.05). Intergroup comparisons showed significant differences in the angle formed by the sella (S), nasion (N), and point A (SNA angle) and the vertical distance from the anterior nasal spine to the coronal plane (ANS-CP) ( P<0.05). Group A had significantly larger SNA angles and ANS-CP values than group B, and the ANS-CP value in group A was significantly larger than in group C (all P<0.05). There were no other statistically significant differences among the groups ( P>0.05). Conclusion:For patients with severe maxillary hypoplasia due to complex cleft lip and palate, TMD can correct sagittal discrepancies between the upper and lower jaws, increase upper airway volume, but may potentially enlarge the alveolar gap area and increase vertical height of the maxilla. AMD result in less change in maxillary position compared to TMD and is mainly used for patients with severe maxillary dental crowding, needing increased arch length, having minor sagittal discrepancies, or with preexisting velopharyngeal dysfunction. LFⅠ result in changes in maxillary position similar to AMD but less than TMD, making it suitable for patients with moderate maxillary hypoplasia and mild maxillary dental crowding. The advantage of LFⅠ lies in its precise postoperative occlusal design and accurate three-dimensional movement of the jaw.

Objective To observe the changes of plasma gastrointestinal hormones in motion sickness sensitive and insensitive individuals before and after vertical oscillation stimulation,and to construct a susceptibility prediction model for motion sickness.Methods A total of 60 healthy male volunteers were enrolled to receive sinusoidal vertical oscillation stimulation for 45 min.The motion sickness susceptibility questionnaire(MSSQ)was filled out before the experiment.Immediately after motion,the severity of motion sickness was evaluated by Graybiel scale.The motion sickness sensitive(Graybiel score≥8 and MSSQ susceptibility index＞21,n=15)and insensitive(Graybiel score≤2 and MSSQ susceptibility index＜5,n=15)participants were screened.Plasma levels of glucagon-like peptide-1(GLP-1),cholecystokinin(CCK),leptin,ghrelin,neuropeptide Y(NPY)and orexin A(OXA)were detected by enzyme-linked immunosorbent assay before and after vertical oscillation stimulation.Logistic regression model was used to analyze the predictive effect of plasma gastrointestinal hormone levels on susceptibility to motion sickness,and a combined predictive model was established.Receiver operating characteristic(ROC)curve was used to analyze predictive value of the model.Results Ghrelin and CCK levels were significantly increased in the sensitive group after stimulation compared with those before stimulation(both P＜0.01),while NPY and leptin levels were significantly decreased(both P＜0.01).Similar results were also observed when compared with the insensitive group after stimulation.Multivariate logistic regression analysis showed that plasma ghrelin,CCK and NPY were independent predictors of susceptibility to motion sickness.The established susceptibility prediction model for motion sickness was logit(P)=-0.051 ×ghrelin+0.060× NPY-0.169 ×CCK+33.397.ROC curve analysis showed that area under curve(AUC)value of the prediction model was 0.988,the sensitivity and specificity were 100.0％and 93.3％,respectively,and the prediction effect was better than ghrelin,CCK and NPY alone(AUC=0.792,0.880,0.838).Conclusion The changes of peripheral gastrointestinal appetite regulating hormone levels may be related to the susceptibility to motion sickness.The combined use of these indicators can predict the susceptibility to motion sickness.