Objective To compare the results of accumulation and continuation methods in indoor radon measurement. Methods The radon concentrations in 30 households in 7 provincial capital cities of China were simultaneously measured using both accumulation and continuation methods. Results The radon concentration measured by accumulation method in 30 households ranged from 21 to 323 Bq/m³, with a median M(P₂₅, P₇₅) of 70.5 (43.8, 111). The radon concentration measured by the continuation method ranged from 16.1 to 258 Bq/m³, with a median M(P₂₅, P₇₅) of 100 (51.3, 141). The average relative percent deviation between the two measurement methods was 41.8%. There were significant differences among the measurement results at 8, 16, and 24 h by the continuation method. Pairwise comparisons showed there were statistical diffferences between 8 h and 16 h, as well as between 8 h and 24h; however, no statistical significance was found (P < 0.05), between 16 h and 24 h. Conclusion The overall continuous measurement results of the 30 households were higher than those of cumulation method. The comparison between accumulation and continuation measurement results did not show a high level of correlation (r=0.49). The continuation method is significantly affected by environmental factors, and the length of the measurement period can affect the measurement results. The selection of indoor radon measurement methods should consider the purpose, sample size, and environmental conditions.

Objective To investigate the expression and clinical significance of extracellular nicotinamide phosphate ribose transferase(eNAMPT)and soluble programmed death ligand 1(sPD-L1)in serum of pa-tients with sepsis secondary to severe pancreatitis(SAP).Methods A total of 92 SAP patients admitted to the hospital from February 2019 to February 2022 were selected as(SAP grou),and divided into a sepsis group(42 cases)and a non-sepsis group(50 cases).Moreover,50 patients with mild to moderate pancreatitis who were diagnosed and treated at the same time were selected as the disease control group,and 50 healthy in-dividuals who underwent the physical examination in the hospital during the same pariod were selected as the healthy control group.Enzyme linked immunosorbent assay was used to detect serum levels of eNAMPT and sPD-L1.Pearson correlation analysis was used for correlation analysis.Multivariate Logistic regression analy-sis was used to analyze factors affecting the occurrence of secondary sepsis in SAP.The predictive value of ser-um eNAMPT,sPD-L1 and their combination in the secondary sepsis of SAP was conducted by receiver operat-ing characteristic(ROC)curve.Results The serum levels of eNAMPT and sPD-L1 in the SAP group were higher than those in the disease control group and the healthy control group,and the differences were statisti-cally significant(P＜0.05).The Acute Physiology and Chronic Health Evaluation Ⅱ(APACHE Ⅱ)score,Sequential Organ Failure Assessment(SOFA)score,white blood cell count,C-reactive protein,pancreatic nec-rosis,systemic inflammatory response syndrome,multiple organ failure,serum eNAMPT and sPD-L1 in the sepsis group were higher than those in the non-sepsis group,and the differences were statistically significant(P＜0.05).There was a positive correlation between serum eNAMPT,sPD-L1 and APACHE Ⅱ score,SOFA score in sepsis SAP patients(P＜0.05).Serum eNAMPT and sPD-L1 were independent risk factors for sec-ondary sepsis in SAP patients.The area under the curve(AUC)of the combination of serum eNAMPT and sPD-L1 for predicting secondary sepsis in SAP patients was 0.916(95％CI:0.868-0.947),which was signif-icantly larger than 0.846(95％CI:0.791-0.879)and 0.830(95％CI:0.774-0.861)of the single indicator detections,and the differences were statistically significant(Z=4.129,4.885,P＜0.001).Conclusion The serum eNAMPT and sPD-L1 levels in patients with sepsis secondary to SAP are elevated,which are related to the severity of the disease.The combination of serum eNAMPT and sPD-L1 has high predictive value for sec-ondary sepsis in SAP.

Objective To investigate the indoor radon concentration and its changing trend in northeastern China. Methods We measured indoor radon levels cumulatively for over three months by solid state nuclear track detection in a total of 261 houses in multi-story or high-rise buildings in Shenyang, Changchun, Harbin, Heihe, and Yichun in northeastern China. The measurement lasted one year in Changchun for seasonal changes. Results The average indoor radon concentration in the five cities was 88 Bq/m³, ranging from 12 to 558 Bq/m³. The indoor radon concentrations were ≤ 100 Bq/m³ in 75.1% of the houses, and ≤ 300 Bq/m³ in 97.7% of the houses. The indoor radon concentration increased with the age of buildings. The indoor radon concentration was highest in winter, and it was higher in summer than in autumn and spring. Conclusion The indoor radon concentration in northeastern China increased compared with the data of 1980s and 1990s. It is highest in the winter heating season, and higher in summer than in spring and autumn. Indoor radon exposure deserves attention.

Objective:To deeply explore the pain experience of patients with rheumatoid arthritis, so as to provide a basis for the practical interventions in the next step.Methods:Using the phenomenological research method, 18 patients with rheumatoid arthritis who experienced pain in the First Hospital of Soochow University from September 2020 to January 2021 were selected for semi-structured interviews, and the Colaizzi 7-step analysis method was used for data analysis.Results:The pain experience of patients with rheumatoid arthritis were summarized into six themes. Pain was complex and erratic, pain relief strategies were ineffective, pain negatively affected daily life, expected more pain relief, seeking help selectively when pain occurs, and experienced pain brings positive change.Conclusions:Medical staff must pay attention to the real experiences and demands of pain in rheumatoid arthritis patients, use information technology and multidisciplinary collaboration to provide patients with effective pain management strategies and encourage patients to make more positive changes to relieve pain symptoms.

Objective To explore the source and control of radon in high radon houses in geothermal fields; Methods Radon concentration in indoor and soil was measured by ATD detector in winter and summer; radionuclides in building materials were measured by gamma-ray spectrometry; radionuclides dose rates of building materials were measured by 6150 A D/ 6H X-γ ray detector; and radon reduction technology was applied to one of the houses;Results The average radon concentrations in 32 rooms were （106.4 ± 63.7） Bq/m³ (summer) and （421.3 ± 138.2） Bq/m³ (winter), and the concentrations in 12.5% (summer) and 96.9% (winter) of the rooms exceed 150 Bq/m³. The average radon concentration in soil around buildings was 12890 Bq/m³ (n = 24), which is 1.7 times of the typical soil radon concentration in Beijing (7600 Bq/m³). After soil decompression, the radon concentration in the house could be reduced to less than 100 Bq/m³. The radon reduction rates of active decompression and passive decompression were 94.6% and 71.4%, respectively. Conclusion The effect of soil decompression on reducing radon concentration in the bottom rooms is obvious. Attention should be paid to the radon in residential environment of geothermal field.

Objective:To obtain the distribution characteristics of radon levels in drinking water in cities of China and analysis their influencing factors.Methods:A total of 31 cities were selected and 406 tap water samples were collected in accordance with the sampling plan based on administrative division. Radon concentrations in the water samples were determined by using RAD7 H 2O measuring devices, and the closed loop liquid-gas balance method and grab method . The radon concentrations in the gas loop were measured by using semiconductor detector. After four measurement periods, radon concentrations in water were calculated. Results:The arithmetic mean of radon concentrations in drinking water from 31 cities was (4.92±9.44) Bq/L and the geometric mean (0.71±7.77) Bq/L, ranging from less than the lower detection limit (LLD) to 43.15 Bq/L. For 84.2% of drinking water samples, radon concentrations were less than US EPA recommended 11.1 Bq/L, all lower than the EU-recommended value of 100 Bq/L.Conclusions:The radon concentrations in drinking water are higher in northeastern, northwestern, southwestern, northern China than those in southern, central China and eastern China. The factors influencing radon concentrations in drinking water are closely related to geological structure and water source type. Compared with the global values, the radon concentrations in drinking water in our cities are low and safe in general in China.

Objective To investigate the clinical application value of longitudinal peak strain( LPS ) and peak strain dispersion ( PSD ) in evaluating left ventricular systolic function and synchrony in patients with essential hypertension . Methods Fifty‐five patients with essential hypertension were enrolled , including 30 patients with non‐left ventricular hypertrophy ( NLV H ) , 25 patients with left ventricular hypertrophy ( LV H ) , at the same time , 30 healthy volunteers were selected as the control group . Echocardiography was performed in all three groups ,and two‐dimensional dynamic images of the left ventricular apical four‐chamber ,three‐chamber ,and two‐chamber′s long‐axis view s were collected for three consecutive cardiac cycles . T he myocardial layer‐specific strain was used to measure the LPS of the left ventricular myocardium of subendocardium ,the middle layer ,the subepicardium ,and the myocardial strain and the PSD of the w hole myocardial layers . Correlation analysis and ROC curve analysis were performed . Results T he LPS in the control group ,NLV H group and LV H group were decreased in turn from inner to out myocardial layers . Compared with the control group , the LPS in the subendocardial , middle , subepicardial ,and w hole myocardial layer of NLV H group were decreased ( P ＜ 0 .05 ) , and the subepicardial myocardial LPS was slightly lower than that in the control group ,the difference was not statistically significant ( P ＞ 0 .05 ) . T he LPS in the subendocardial , middle , subepicardial ,and whole myocardial layer of LV H group were all reduced ( P＜0 .05) . Between the NLV H group and LV H group , the declines of the LPS in the subendocardial and middle layer in the LV H group were statistically significant ( P ＜0 .05) ,the LPS in the subepicardial layer and the w hole myocardial layer had no significant difference ( P ＞0 .05) . Compared with the control group ,the PSD of the NLVH group and the LVH group increased ( P ＜ 0 .05 ) . Compared with the NLV H group ,the PSD of the LV H group increased ( P ＜0 .05) . Inter‐ventricular septum thickness ( IVSd) and the LPS in the subendocardial ,middle ,subepicardial , and w hole myocardial layer were negatively correlated ( r ＝ －0 .537 ,－0 .518 ,－0 .266 ,－0 .471 ; all P ＜0 .05) , left ventricle posterior wall thickness ( LVPWd ) and the LPS in the subendocardial , middle , subepicardial ,and whole myocardial layer were negatively correlated ( r ＝ －0 .539 , －0 .524 , －0 .283 ,－0 .478 ;all P ＜0 .05) . T he area under the ROC curve ( AUC) of the LPS in the subendocardial ,middle , subepicardial ,and w hole myocardial layer and PSD for the diagnosis of hypertension were 0 .685 ,0 .652 , 0 .510 ,0 .623 ,0 .995 ,respectively . T he cut‐off values were －21 .70% ,－18 .90% ,－16 .95% ,－19 .45% , 46 .50 ms , and the sensitivities were 94 .4% , 83 .3% , 77 .8% , 94 .4% , 100% , respectively , and the specificities were 47 .8% ,52 .2% ,39 .1% ,39 .1% ,95 .7% ,respectively . Conclusions T he layer‐specific strain can quantitatively evaluate myocardial longitudinal strain in patients with essential hypertension , provide a non‐invasive test for early diagnosis of hypertensive heart disease ,and the evaluation of left ventricular myocardial stratification . PSD for evaluating primary synchronous changes in left ventricular myocardial contraction in patients with hypertension has certain advantages .

Objective: To quantitatively evaluate the variation of preoperative and postoperative structure and function of mitral valve after mitral valve annuloplasty(MVP) for mitral valve prolapse by real-time three-dimensional transesophageal echocardiography(RT-3D TEE). Methods: Thirty patients with mitral valve prolapse for MVP were studied, the minimum area of the three-dimensional view of the annulus(A3Dmin), three dimensional circumference(C3D), anterolateal-to-posteromedial diameter(DAlPm), anterior-to-posteior diameter(DAP), height (H), the ratio of annulus height to anterolated-to-posteromedial diameter(H/DAlPm), aorto-mitral angle(θ), the ellipticity of the the anterior-to-posterior diameter and anterolateal-to-posteromedial diameter of the annulus(E2D), the three-dimensional exposed area of the leaflet(A3DE), prolapse height(HProl), prolapse volume(VProl), non-planarity angle(θNPA) were evaluated by RT-3D TEE before and after operation. Coaptation area(CoapA), coaptation index(CPI), annulus systolic function index were calculated. Results: Compared with the preoperation, A3Dmin, C3D, DAlPm, DAP, H, H/DAlPm, A3DE, HProl, VProl, θNPA of postoperative were reduced, E2D, CoapA, CPI, annulus systolic function index of the postoperation increased, the difference of above parameters were statistically significant (P<0.05). CPI and annulus systolic function index were negatively correlated with the area of valve regurgitation area before and aftere operation (r=-0.79, P<0.01; r=-0.67, P<0.01). Furthermore, CPI was closely correlated with annulus systolic function index (r=0.63, P<0.01). Conclusions After MPV, mitral valve three-dimensional structural parameters are significantly changed, CPI and annulus systolic function are improved. CPI is closely correlated with annulus systolic function, and RT-3D TEE can quantitatively evaluate the structure and function of mitral valve before and after MPV.

Objective To establish a simple and convenient method and study the feasibility of using gold nanoparticle composites (ssDNA-AuNPs) for colorimetric detection of gamma radiation.Methods The composites ssDNA-AuNPs were prepared by applying the ssDNA to the surface of AuNPs,and then were irradiated with gamma ray with absorbed doses of 0,5,10,20,and 30 Gy,respectively.Subsequently the color change in the solutions were observed simultaneously with absorption spectra being measured.The linear relationship between the ratio of A625/A521 in the absorption spectrum and the absorbed dose was established.Results With the increase of radiation dose,the color of the solutions changed from wine-red to blue-violet gradually,the ratio of A625/A521 in absorption spectra had excellent liner response for absorbed dose ranging from 0 to 30 Gy,and the linear equation was A625/A521 =0.020 6 + 0.303 6 E(R2 =0.991 5).Conclusions The ssDNA-AuNPs synthesized in this experiment can be successfully used for colorimetric detection of gamma absorbed dose,and a simple and convenient method for detection of gamma radiation has been newly established.

Objective To increase the cumulative measurement level of 222 Rn and 220 Rn and ensure the accuracy and reliability of the measurement result . Methods By using improved 222 Rn-220 Rn discriminative detectors ( LD-P detectors) , the radon research group of National Institute for Radiological Protection Chinese Center for Disease Control and Prevention participated with the intercomparison organized by National Institute of Radiological Science ( NIRS) , Japan. Specifically, with the 222 Rn-220 Rn discriminative detectors being sent to Japan, the comparison was completed under different conditions in the 222 Rn chamber and 220 Rn chamber in NIRS. After exposure, the detectors were sent back to our laboratory for etching and analysis, and then measurement result were informed to NIRS. Finally, NIRS returned the exposure reference values of 222 Rn and 220 Rn to our laboratory. Results Under the conditions of high and low levels of 222 Rn, the relative percentage differences ( RPD ) between the measured values and the reference value provided by the NIRS were -12. 0％ and -11. 8％, respectively, while coefficients of variation ( COV) were 3. 0％ and 6. 2％, respectively. Under the conditions of high level and low levels of 220Rn, the relative percentage differences (RPD) between the measured value and the reference value provided by the NIRS were -0. 8％ and -8. 0％, respectively; coefficients of variation ( COV ) were 6. 7％ and 4. 5％, respectively. Conclusions This intercomparison result were categorized by NIRS ( PRD<10％) , with the satisfactory result of LD-P detectors available.