Background: Sclerostin, initially recognized for its pivotal role in bone metabolism, has gained attention for its multifaceted impact on overall human health. However, its influence on frailty—a condition that best reflects biological age—has not been thoroughly investigated. Methods: We collected blood samples from 244 older adults who underwent comprehensive geriatric assessments. Sclerostin levels were quantified using an enzyme-linked immunosorbent assay. Frailty was assessed using two validated approaches: the phenotypic model by Fried and the deficit accumulation frailty index (FI) by Rockwood. Results: After controlling for sex, age, and body mass index, we found that serum sclerostin levels were significantly elevated in frail individuals compared to their robust counterparts (P<0.001). There was a positive correlation between serum sclerostin concentrations and the FI (P<0.001). Each standard deviation increase in serum sclerostin was associated with an odds ratio of 1.87 for frailty (P=0.003). Moreover, participants in the highest quartile of sclerostin levels had a significantly higher FI and a 9.91-fold increased odds of frailty compared to those in the lowest quartile (P=0.003 and P=0.039, respectively). Conclusion These findings, which for the first time explore the association between circulating sclerostin levels and frailty, have significant clinical implications, positioning sclerostin as one of potential blood-based biomarkers for frailty that captures the comprehensive physical, mental, and social aspects of the elderly, extending beyond its traditional role in bone metabolism.

Background: In vitro and animal studies have demonstrated that bone morphogenetic protein-7 (BMP-7), renowned for its osteogenic properties, also exerts beneficial effects on muscle metabolism by enhancing myogenesis and reversing muscle atrophy. Despite being proposed as a common regulatory factor for both muscle and bone, the impact of BMP-7 on human muscle health has not been thoroughly investigated. Methods: This cross-sectional study involved 182 community-dwelling older adults who underwent a comprehensive geriatric assessment in South Korea. Sarcopenia was diagnosed using Asian-specific cutoffs, and serum BMP-7 levels were quantified via enzyme immunoassay. Results: The mean age of the participants was 72.2±7.3 years, with 62.6% being female. After adjustments for confounders, serum BMP-7 levels were not significantly different between individuals with and without sarcopenia, nor were there differences based on skeletal muscle mass, strength, or physical performance levels (p=0.423 to 0.681). Likewise, no correlations were detected between circulating BMP-7 levels and any sarcopenia assessment metrics such as skeletal muscle index, grip strength, gait speed, or chair stand completion times (p=0.127 to 0.577). No significant associations were observed between increases in serum BMP-7 concentrations and the risk of sarcopenia or poor muscle phenotypes (p=0.431 to 0.712). Stratifying participants into quartiles based on serum BMP-7 levels also indicated no differences in sarcopenia-related parameters (p=0.663 to 0.996). Conclusion Despite experimental evidence supporting BMP-7’s role in muscle metabolism, this study found no significant association between serum BMP-7 levels and clinical indicators of muscle health in older adults. These findings challenge the utility of serum BMP-7 as a biomarker for sarcopenia in this demographic.

Background: Sclerostin, initially recognized for its pivotal role in bone metabolism, has gained attention for its multifaceted impact on overall human health. However, its influence on frailty—a condition that best reflects biological age—has not been thoroughly investigated. Methods: We collected blood samples from 244 older adults who underwent comprehensive geriatric assessments. Sclerostin levels were quantified using an enzyme-linked immunosorbent assay. Frailty was assessed using two validated approaches: the phenotypic model by Fried and the deficit accumulation frailty index (FI) by Rockwood. Results: After controlling for sex, age, and body mass index, we found that serum sclerostin levels were significantly elevated in frail individuals compared to their robust counterparts (P<0.001). There was a positive correlation between serum sclerostin concentrations and the FI (P<0.001). Each standard deviation increase in serum sclerostin was associated with an odds ratio of 1.87 for frailty (P=0.003). Moreover, participants in the highest quartile of sclerostin levels had a significantly higher FI and a 9.91-fold increased odds of frailty compared to those in the lowest quartile (P=0.003 and P=0.039, respectively). Conclusion These findings, which for the first time explore the association between circulating sclerostin levels and frailty, have significant clinical implications, positioning sclerostin as one of potential blood-based biomarkers for frailty that captures the comprehensive physical, mental, and social aspects of the elderly, extending beyond its traditional role in bone metabolism.

Background: In vitro and animal studies have demonstrated that bone morphogenetic protein-7 (BMP-7), renowned for its osteogenic properties, also exerts beneficial effects on muscle metabolism by enhancing myogenesis and reversing muscle atrophy. Despite being proposed as a common regulatory factor for both muscle and bone, the impact of BMP-7 on human muscle health has not been thoroughly investigated. Methods: This cross-sectional study involved 182 community-dwelling older adults who underwent a comprehensive geriatric assessment in South Korea. Sarcopenia was diagnosed using Asian-specific cutoffs, and serum BMP-7 levels were quantified via enzyme immunoassay. Results: The mean age of the participants was 72.2±7.3 years, with 62.6% being female. After adjustments for confounders, serum BMP-7 levels were not significantly different between individuals with and without sarcopenia, nor were there differences based on skeletal muscle mass, strength, or physical performance levels (p=0.423 to 0.681). Likewise, no correlations were detected between circulating BMP-7 levels and any sarcopenia assessment metrics such as skeletal muscle index, grip strength, gait speed, or chair stand completion times (p=0.127 to 0.577). No significant associations were observed between increases in serum BMP-7 concentrations and the risk of sarcopenia or poor muscle phenotypes (p=0.431 to 0.712). Stratifying participants into quartiles based on serum BMP-7 levels also indicated no differences in sarcopenia-related parameters (p=0.663 to 0.996). Conclusion Despite experimental evidence supporting BMP-7’s role in muscle metabolism, this study found no significant association between serum BMP-7 levels and clinical indicators of muscle health in older adults. These findings challenge the utility of serum BMP-7 as a biomarker for sarcopenia in this demographic.

Background: Sclerostin, initially recognized for its pivotal role in bone metabolism, has gained attention for its multifaceted impact on overall human health. However, its influence on frailty—a condition that best reflects biological age—has not been thoroughly investigated. Methods: We collected blood samples from 244 older adults who underwent comprehensive geriatric assessments. Sclerostin levels were quantified using an enzyme-linked immunosorbent assay. Frailty was assessed using two validated approaches: the phenotypic model by Fried and the deficit accumulation frailty index (FI) by Rockwood. Results: After controlling for sex, age, and body mass index, we found that serum sclerostin levels were significantly elevated in frail individuals compared to their robust counterparts (P<0.001). There was a positive correlation between serum sclerostin concentrations and the FI (P<0.001). Each standard deviation increase in serum sclerostin was associated with an odds ratio of 1.87 for frailty (P=0.003). Moreover, participants in the highest quartile of sclerostin levels had a significantly higher FI and a 9.91-fold increased odds of frailty compared to those in the lowest quartile (P=0.003 and P=0.039, respectively). Conclusion These findings, which for the first time explore the association between circulating sclerostin levels and frailty, have significant clinical implications, positioning sclerostin as one of potential blood-based biomarkers for frailty that captures the comprehensive physical, mental, and social aspects of the elderly, extending beyond its traditional role in bone metabolism.

Background: In vitro and animal studies have demonstrated that bone morphogenetic protein-7 (BMP-7), renowned for its osteogenic properties, also exerts beneficial effects on muscle metabolism by enhancing myogenesis and reversing muscle atrophy. Despite being proposed as a common regulatory factor for both muscle and bone, the impact of BMP-7 on human muscle health has not been thoroughly investigated. Methods: This cross-sectional study involved 182 community-dwelling older adults who underwent a comprehensive geriatric assessment in South Korea. Sarcopenia was diagnosed using Asian-specific cutoffs, and serum BMP-7 levels were quantified via enzyme immunoassay. Results: The mean age of the participants was 72.2±7.3 years, with 62.6% being female. After adjustments for confounders, serum BMP-7 levels were not significantly different between individuals with and without sarcopenia, nor were there differences based on skeletal muscle mass, strength, or physical performance levels (p=0.423 to 0.681). Likewise, no correlations were detected between circulating BMP-7 levels and any sarcopenia assessment metrics such as skeletal muscle index, grip strength, gait speed, or chair stand completion times (p=0.127 to 0.577). No significant associations were observed between increases in serum BMP-7 concentrations and the risk of sarcopenia or poor muscle phenotypes (p=0.431 to 0.712). Stratifying participants into quartiles based on serum BMP-7 levels also indicated no differences in sarcopenia-related parameters (p=0.663 to 0.996). Conclusion Despite experimental evidence supporting BMP-7’s role in muscle metabolism, this study found no significant association between serum BMP-7 levels and clinical indicators of muscle health in older adults. These findings challenge the utility of serum BMP-7 as a biomarker for sarcopenia in this demographic.

Background: Sclerostin, initially recognized for its pivotal role in bone metabolism, has gained attention for its multifaceted impact on overall human health. However, its influence on frailty—a condition that best reflects biological age—has not been thoroughly investigated. Methods: We collected blood samples from 244 older adults who underwent comprehensive geriatric assessments. Sclerostin levels were quantified using an enzyme-linked immunosorbent assay. Frailty was assessed using two validated approaches: the phenotypic model by Fried and the deficit accumulation frailty index (FI) by Rockwood. Results: After controlling for sex, age, and body mass index, we found that serum sclerostin levels were significantly elevated in frail individuals compared to their robust counterparts (P<0.001). There was a positive correlation between serum sclerostin concentrations and the FI (P<0.001). Each standard deviation increase in serum sclerostin was associated with an odds ratio of 1.87 for frailty (P=0.003). Moreover, participants in the highest quartile of sclerostin levels had a significantly higher FI and a 9.91-fold increased odds of frailty compared to those in the lowest quartile (P=0.003 and P=0.039, respectively). Conclusion These findings, which for the first time explore the association between circulating sclerostin levels and frailty, have significant clinical implications, positioning sclerostin as one of potential blood-based biomarkers for frailty that captures the comprehensive physical, mental, and social aspects of the elderly, extending beyond its traditional role in bone metabolism.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.

Objective: This study aimed to investigate the effect of three-dimensional (3D) printed clear aligners (CA) with different designs on the extrusion of mandibular premolars using a force/moment measurement system and digital image correlation (DIC). Methods: The forces and moments applied to the mandibular canines, first and second premolars were measured using a multi-axis force/ moment transducer when an extrusion of 0.5 mm was planned, assuming the mandibular first premolars were intruded by 1 mm. In addition, displacement and strain changes in the CA were analyzed using the DIC method. CA designs were categorized based on the presence of first premolar attachment and subdivided into equigingival margins, 1-mm extended margins, equi-margins with 1-mm thickness and height, and equi-margins with 1-mm reduced buccolingual width.The CA was printed directly at a thickness of 0.5 mm, and the experiments were conducted at 37°C. Results: The results showed that attachment played an important role in the extrusion of first premolars in both the force/moment measurement system and the DIC method. Intrusion was observed without attachment, even though extrusion was planned. CA designs apply greater force to the cervical region by extending the margin or reducing the buccolingual width, thereby improving extrusion efficiency. Conclusions Force and moment changes in direct 3D printed CA are complex and difficult to predict; however, modifying aligner designs, such as extending the margin or reducing buccolingual width, and using appropriate attachments could minimize unwanted tooth movement, optimize planned treatment, and increase treatment predictability.