Objective To observe the efficacy of 577 nm subthreshold micropulse laser photocoagulation(SMLP)on central serous chorioretinopathy(CSC)and explore the baseline characteristics and prognostic features of multimodal ima-ging-based CSC.Methods A retrospective analysis was conducted on 44 patients(46 eyes)with CSC diagnosed at the Ophthalmology Department of the General Hospital of Central Theater Command,PLA from June 2017 to May 2022.The pa-tients were classified into the simple CSC group(23 eyes)and the complex CSC group(23 eyes)based on the multimodal imaging classification.All patients underwent 577 nm SMLP treatment.The best corrected visual acuity(BCVA)and cen-tral macular thickness(CMT)of patients between the two groups were compared before treatment and at 1,3 and 6 months after treatment.The intra-group and inter-group changes and the complete absorption rate of subretinal fluid(SRF)in CSC eyes of patients between the two groups were assessed before treatment and at 6 months after follow-up.Results The BCVA of patients in the simple CSC group significantly improved at 6 months after treatment compared with the base-line(P=0.010);the BCVA of patients in the complex CSC group significantly improved at 3 and 6 months after treatment compared with the baseline(both P＜0.01).The CMT of patients in the simple CSC group was significantly lower than the baseline at 1,3,and 6 months after treatment(all P＜0.05);the CMT of patients in the complex CSC group was signifi-cantly lower than the baseline at 1 and 6 months after treatment(both P＜0.05);the change in CMT from baseline after 6 months of treatment for simple CSC was(-163.74±88.10)μm,the change in CMT from baseline after 6 months of treat-ment for complex CSC was(-71.96±164.30)μm,and the difference between the two groups was statistically significant(P=0.023).During the follow-up period,the number of eyes with persistent SRF in the simple CSC group was significant-ly lower than that in the complex CSC group(P＜0.05).The complete absorption rate of SRF at 6 months after treatment in the simple CSC group was greater than that in the complex CSC group(P＜0.05).Conclusion The prognosis of sim-ple CSC treated with 577 nm SMLP is better than that of complex CSC,and the new multimodal imaging classification has a certain value in predicting the prognosis of CSC after SMLP.

The spectrum of biopsy-confirmed kidney disease varies with regions and periods. We describe the distribution of pathological types and epidemiological characteristics of kidney diseases in Northwest China due to regional differences in geographical environment, social economy, and dietary habits. Methods: Kidney biopsy cases from 2005 to 2020 in Xijing Hospital were retrospectively analyzed. Pathological characteristics of patients in different periods were analyzed using the t test or chi-square test. Joinpoint regression was used to analyze trends in pathological types and disease spectrum. Results: A total of 10,528 eligible patients were included. Primary glomerular disease (PGD) accounted for the majority of the cases and exhibited an obvious downward trend, whereas secondary glomerular disease (SGD) showed an obvious upward trend. Among PGD, immunoglobulin A nephropathy (IgAN) remained the most common pathological type, and the detection rate of membranous nephropathy (MN) was significantly increased. Among SGD, Henoch-Schönlein purpura nephritis (HSPN) was the most common pathological type and may present a significant characteristic of Northwest China. Diabetic nephropathy (DN) exhibited the most obvious upward trend in the whole process, whereas the fastest growth since 2012 was in hypertensive nephropathy. Conclusion: The proportion of SGD increased whereas PGD declined. IgAN remained the most common PGD, and HSPN was the most common SGD. MN and DN showed the most obvious upward trend among PGD and SGD, respectively. Changes in the spectrum of kidney disease, especially the constituent ratio of SGD, pose a great challenge to public health.

Objective:At present,the doctor-patient relationship is tense.The prevalence of negative emotions,such as depression and anxiety,among healthcare workers is increasing every year.Negative attitudes of medical workers toward mental problems may aggravate the doctor-patient conflict and psychological problems of medical workers.This study aims to explore the complex network relationships between outpatient medical workers'attitudes toward mental problems,doctor-patient relationships,and their depression/anxiety levels. Methods:A total of 578 outpatient medical staff from the Second Xiangya Hospital of Central South University(167 males,411 females)completed questionnaires on their attitudes toward mental problems,doctor-patient relationships,and depression/anxiety symptoms.Network analysis was conducted separately to construct the"attitude towards mental problems-doctor-patient relationship network"and"depression-anxiety related network". Results:The edge between"M15(insulting words)"and"D8(waste time)"showed the strongest strength in the"attitude towards mental problems-doctor-patient relationship network",and"M15(insulting words)"had the highest bridge strength in the network.For the analysis of emotional variables,"P1(anhedonia)"showed the most obvious association with"D10(communication difficulties)"in the doctor-patient relationship and"M2(poor quality of life)"in the psychiatric attitudes,and"P1(anhedonia)"was the key bridge symptom in the network. Conclusion:The"insulting words"may be an intervention target for medical workers'attitudes toward mental problems.The"anhedonia"in depression is the potential symptom that needs to be treated.Intervention targeting these variables may be beneficial to improve the mental health level of medical workers and the doctor-patient relationship.

Objective:To construct evaluation indicators system for functional capability of the elderly, so as to provide reference for evaluating their functional capability.Methods:The evaluation indicators for functional capability of the elderly were extracted and integrated through literature analysis. From March to April 2023, 15 experts were selected for two rounds of expert consultation to screen, modify, and improve indicators, and ultimately determine evaluation indicators system for functional capability of the elderly.Results:The effective response rates of the two rounds of expert consultation questionnaires were both 100.00% (15/15) , and the expert authority coefficients were all 0.930. The Kendall's W of importance and applicability of the first level indicators in the first round were 0.437 and 0.573 ( P<0.05) , while the Kendall's W of importance and applicability of the second level indicators were 0.285 and 0.287 ( P<0.05) . The Kendall's W of importance and applicability of the second level indicators in the second round were 0.380 and 0.345 ( P<0.05) . The final evaluation indicators system for functional capability of the elderly included 5 first level indicators and 28 second level indicators. Conclusions:The evaluation indicators system for functional capability of the elderly are scientific and reliable, providing reference for evaluating the functional capability of the elderly.

Objective:To explore the effect sense of security and self-control on parent-child cohesion and externalizing problem behaviors in primary and middle school students.Methods:A total of 1 402 primary and middle school students were investigated with the problem behavior frequency scale(PBFS), family adaptability and cohesion scale(FACES-CV), security questionnaire(SQ) and brief self-control scale(BSCS). SPSS 25.0 and PROCESS v2.16 were used for statistical analysis, and common method deviation test, Pearson correlation analysis and intermediary effect analysis were used in the analysis.Results:Parent-child cohesion of primary and middle school students was positively correlated with security and self-control ( r=0.279, 0.303, both P<0.01), which was negatively correlated with externalizing problem behaviors ( r=-0.154, P<0.01). Security was positively correlated with self-control ( r=0.567, P<0.01). Security, self-control and externalizing problem behaviors were negatively correlated ( r=-0.147, -0.250, both P<0.01). The security and self-control of primary and middle school students played a partial mediating role between parent-child cohesion and externalizing problem behaviors.The mediating effect consisted of two paths: one was parent-child cohesion-self-control-externalizing problem behaviors, the other was parent-child cohesion-security-self-control-externalizing problem behaviors. The effect values of these two paths accounted for 20.52% and 20.26% of the total effect respectively. Conclusion:Parent-child cohesion not only directly affects the externalizing problem behaviors of primary and middle school students, but also indirectly affects the externalizing problem behavior through the independent mediating effect of self-control and the chain mediation of security-self-control.

Objective:To explore the effect of three-dimensional(3D) design and printing in the reoperation of asymmetric deformity after orthognathic surgery.Methods:Patients of facial asymmetry after orthognathic surgery were included in the Department of Stomatology, Shenzhen University General Hospital and Department of Oral & Maxillofacial Surgery, Shenzhen Stomatology Hospital Affiliated to Shenzhen University from January 2016 to August 2020. Surgical plans and guide plates (positioning guide plate, bone cutting guide plate, reset guide plate) were made by 3D design and printing. During the operations, guide plates were used to guide osteotomy. The facial shape satisfaction of clinicians/patients/third-party were recorded and analyzed at preoperation and 6-12 months postoperation. These patients’ CT scan data was imported to the digital surgery software. Then the distance of chin-midpoint to mid-sagittal plane and the difference of bilateral protuberant point of mandible body to mid-sagittal plane were measured at preoperation and 6-12 months postoperation to determine whether the asymmetry were corrected and postoperative distance were the same as the preoperative design. Data analysis was conducted using SPSS 17.0 statistical software, and measurement data were expressed as Mean±SD. The preoperative and postoperative satisfaction of patients/clinicians/third-party, digital data of preoperation/postoperation and digital data of design-operations/postoperation were analyzed by paired t-test. Analysis of variance and dunnett- t test were used to compare the satisfaction of the surgeon, the third party and patients before and after operation. Results:There were 16 cases of facial asymmetry after orthognathic surgery, including 3 males and 13 females, aged from 18 to 35 years. In 9 cases, genioplasty were used to correct chin deviation. In the other 4 cases, unilateral buccal cortical bone resection were used to correct mandibular body deviation. In the last 3 cases, genioplasty and unilateral buccal cortical bone resection were both applied. All 16 patients successfully received the operation according to the preoperative digital designed plate. Postoperative follow-up ranged 6 months to 1 year. In the 12 cases of genioplasty, the distance of chin-midpoint to mid-sagittal plane reduced from(4.99±0.83) mm preoperatively to (1.63±0.80) mm postoperatively and the difference significant ( t=9.09, P<0.001). There was no significant difference between the distance of preoperative design [(1.50±0.43) mm] and the postoperative one ( t=-0.83, P=0.423). In the 7 cases of unilateral buccal cortical bone resection, the difference of bilateral protuberant point of mandible body to mid-sagitta plane reduced from (7.26±1.20) mm preoperatively to (2.44±0.56) mm postoperatively and the difference was statistically significant ( t=10.26, P<0.001). There was no significant difference was observed between the distance of preoperative design [(2.39±0.16) mm] and the postoperative one ( t=-0.29, P=0.779). The preoperative satisfaction of patients, clinicians and third-party were 65.94±8.21, 79.69±5.91, 79.38±7.50. The postoperative satisfaction of patients, clinicians and third-party were 90.00±5.48, 90.63±2.50, 90.00±4.08. The postoperative satisfaction of patients, chief surgeon and third party was higher than that preoperative satisfaction and the difference was statistically significant( t=-9.15, P<0.001; t=-7.50, P<0.001; t=-6.04, P<0.001). The difference of preoperation satisfaction was statistically significant( F=18.66, P<0.001). The difference of satisfaction of the clinicians and the patients was statistically significant ( P<0.001). The difference of satisfaction of the third-party and the patients was statistically significant ( P<0.001). The difference of postoperation satisfaction was not statistically significant( F=0.12, P=0.889). Conclusions:3D design and printing can 3D analyze comprehensively, simulate surgery accurately, visualize proposed result and guide 3D printing digital guiding plate to perform surgery accurately. In addition, it can improve postoperative satisfaction. So 3D design and printing had obvious advantages in the secondary surgery of asymmetric deformity correction after orthognathic surgery.

Objective:To explore the effect of three-dimensional(3D) design and printing in the reoperation of asymmetric deformity after orthognathic surgery.Methods:Patients of facial asymmetry after orthognathic surgery were included in the Department of Stomatology, Shenzhen University General Hospital and Department of Oral & Maxillofacial Surgery, Shenzhen Stomatology Hospital Affiliated to Shenzhen University from January 2016 to August 2020. Surgical plans and guide plates (positioning guide plate, bone cutting guide plate, reset guide plate) were made by 3D design and printing. During the operations, guide plates were used to guide osteotomy. The facial shape satisfaction of clinicians/patients/third-party were recorded and analyzed at preoperation and 6-12 months postoperation. These patients’ CT scan data was imported to the digital surgery software. Then the distance of chin-midpoint to mid-sagittal plane and the difference of bilateral protuberant point of mandible body to mid-sagittal plane were measured at preoperation and 6-12 months postoperation to determine whether the asymmetry were corrected and postoperative distance were the same as the preoperative design. Data analysis was conducted using SPSS 17.0 statistical software, and measurement data were expressed as Mean±SD. The preoperative and postoperative satisfaction of patients/clinicians/third-party, digital data of preoperation/postoperation and digital data of design-operations/postoperation were analyzed by paired t-test. Analysis of variance and dunnett- t test were used to compare the satisfaction of the surgeon, the third party and patients before and after operation. Results:There were 16 cases of facial asymmetry after orthognathic surgery, including 3 males and 13 females, aged from 18 to 35 years. In 9 cases, genioplasty were used to correct chin deviation. In the other 4 cases, unilateral buccal cortical bone resection were used to correct mandibular body deviation. In the last 3 cases, genioplasty and unilateral buccal cortical bone resection were both applied. All 16 patients successfully received the operation according to the preoperative digital designed plate. Postoperative follow-up ranged 6 months to 1 year. In the 12 cases of genioplasty, the distance of chin-midpoint to mid-sagittal plane reduced from(4.99±0.83) mm preoperatively to (1.63±0.80) mm postoperatively and the difference significant ( t=9.09, P<0.001). There was no significant difference between the distance of preoperative design [(1.50±0.43) mm] and the postoperative one ( t=-0.83, P=0.423). In the 7 cases of unilateral buccal cortical bone resection, the difference of bilateral protuberant point of mandible body to mid-sagitta plane reduced from (7.26±1.20) mm preoperatively to (2.44±0.56) mm postoperatively and the difference was statistically significant ( t=10.26, P<0.001). There was no significant difference was observed between the distance of preoperative design [(2.39±0.16) mm] and the postoperative one ( t=-0.29, P=0.779). The preoperative satisfaction of patients, clinicians and third-party were 65.94±8.21, 79.69±5.91, 79.38±7.50. The postoperative satisfaction of patients, clinicians and third-party were 90.00±5.48, 90.63±2.50, 90.00±4.08. The postoperative satisfaction of patients, chief surgeon and third party was higher than that preoperative satisfaction and the difference was statistically significant( t=-9.15, P<0.001; t=-7.50, P<0.001; t=-6.04, P<0.001). The difference of preoperation satisfaction was statistically significant( F=18.66, P<0.001). The difference of satisfaction of the clinicians and the patients was statistically significant ( P<0.001). The difference of satisfaction of the third-party and the patients was statistically significant ( P<0.001). The difference of postoperation satisfaction was not statistically significant( F=0.12, P=0.889). Conclusions:3D design and printing can 3D analyze comprehensively, simulate surgery accurately, visualize proposed result and guide 3D printing digital guiding plate to perform surgery accurately. In addition, it can improve postoperative satisfaction. So 3D design and printing had obvious advantages in the secondary surgery of asymmetric deformity correction after orthognathic surgery.

Luohu District of Shenzhen has implemented the global budget management mode as " surplus reward, no compensation for overspending and reasonable sharing" in the hospital group, which continued to strengthen cooperation, optimize services, reduce costs, and improve health outcomes. The authors employed the game theory to build a game model of medical alliance under Luohu global budget management mode, discussing the reasons of medical and health institution′s stronger cooperation and what could be improved in Luohu′s case. Based on the experience of Luohu total budget management, it is suggested that when implementing total budget, all localities should improve closed-loop management, expand coverage, adopt compound medical insurance payment method, promote outpatient coordination, strengthen assessment and incentives, so as to give full play to the incentive role of total budget.

Germany has introduced the " point method" of fee-for-service at the outpatient departments under a global budget system, in an effort to curb medical expenditure growth. The authors employed the game theory to build a physician′s game model under Germany′s point method, illustrating the causes of " increasing points" behaviors of physicians, the negative effects caused by the increase of points as well as the prevention and control measures employed by Germany and its mechanism. Point method payment has been introduced in several areas in China at their inpatient departments, which is delivered to medical service providers via the performance-based distribution model, with the providers affected in their behaviors. As a result, some areas will tend to appear such " increasing points" behaviors as competing for patients, lowering admission criteria, and raising point value. In view of Germany′s experiences, China should adopt such measures as dynamic monitoring system, disclosure of " increasing points " behaviors, perfection of hierarchical medical system, and strengthening the self-governance via medical sector′s associations.

Objective:To analyze, with Wuhan as an example, the problems found in the infrastructure development of China′s healthcare institutions, and put forward optimization suggestions for future epidemic prevention and control.Methods:From May to June 2020, we surveyed with questionnaires 56 healthcare institutions in Wuhan, covering such aspects as basic information of the institutions, infectious disease infrastructure readiness, and the converted wards for COVID-19. Statistical descriptions were used to analyze data so acquired.Results:The number of beds in the infectious departments of healthcare institutions in Wuhan amounted to 1.64 per 10 000 people, yet the existing 1 873 beds and about 5 000 convertible beds failed to meet the medical needs against the outbreak of COVID-19. After the outbreak, a total of 19 084 convertible beds were set up, of which general hospitals accounted for 88%; the area occupied by each converted bed in traditional Chinese medicine hospitals, hospitals of traditional and Western medicine, and maternal and child hospitals (<30.0m 2) was lower than that in general hospitals and specialist hospitals (>40.0m 2). Conclusions:Healthcare institutions should scientifically allocate " peacetime-wartime adaptive" hospital beds, optimize both the number and efficiency of these beds, and prepare for the worst scenarios, so that the infrastructure can be built and maintained in strict accordance with standards, government departments can rationally arrange infectious disease prevention and control facilities and strengthen their planning in case of emergencies.