BACKGROUND:Streptococcus mutans is an important pathogen of dental caries,and timely detection of its levels is of great significance for early detection and treatment of dental caries. OBJECTIVE:To evaluate the effect of loop-mediated isothermal amplification(FTA-LAMP)direct extraction of Streptococcus mutans DNA. METHODS:(1)Bacterial suspensions containing ATCC standard strains(Streptococcus mutans)were prepared and inoculated into the brain-heart leachate medium.After mixed thoroughly,the mixture was then diluted in a 10-fold gradient into seven concentrations(4.2×107,4.2×106,4.2×105,4.2×104,4.2×103,4.2×102,4.2×10 CFU/mL),two parallel controls were made for each dilution level,and sterile water was used as a blank control.(2)The DNA of Streptococcus mutans was extracted using FTA Elute card,boiling method,kit extraction and lysate extraction methods separately and then amplified using LAMP technology was amplified.A specificity test was also performed to compare the differences between the four DNA extraction methods.RESULTS AND CONCLUSION:The DNA extracted by all four methods met the requirements for LAMP amplification.Specificity test results showed that only Streptococcus mutans could specifically amplify the target gene.The detection limit value of the DNA concentration was 4.2×103 CFU/mL for the lysate method,4.2×104 CFU/mL for the FTA Elute card extraction method,4.2×106 CFU/mL for the kit extraction method,and 4.2×107 CFU/mL for the boiling method.In the other aspects of the four extraction methods,the kit extraction method had the highest experimental cost,number of steps and time;the other three methods had the same number of steps,with the FTA Elute card method requiring the least amount of instruments,the boiling method having the lowest single cost,and the lysate extraction method taking the least amount of time.Only a small amount of bacteria were needed for successful extraction using both the FTA Elute card and lysate extraction methods.Compared with the FTA Elute card method,the lysate extraction method was superior in terms of time,but it had a high single cost and required more equipment.To conclude,the FTA-LAMP technology established in this study has the advantages of ease of operation,high specificity,high sensitivity,and visualization,which is expected to be a new way for efficient extraction and detection of Streptococcus mutans.

Sterilization is one of the key links in the production of traditional Chinese medicine,and it is also an important factor to ensure the safety,effectiveness and quality control of traditional Chinese medicine.Traditional sterilization techniques such as moist heat sterilization are limited in many cases due to their inherent shortcomings.In contrast,irradiation sterilization has attracted more and more attention due to its advantages of fast,efficient,strong sterilization and low cost.However,the chemical composition of traditional Chinese medicine is complex,due to the radioactivity and strong penetration of irradiation,after a certain dose of irradiation,its chemical composition and pharmacological activity may change.At present,there is still a lack of systematic research on the changes of chemical composition,effectiveness and safety of traditional Chinese medicine after irradiation sterilization.Based on the research status of 60Co-γ ray and electron beam irradiation sterilization in the sterilization of traditional Chinese medicine in recent years,this paper reviews the effects of irradiation on the effectiveness of traditional Chinese medicine,the detection methods of irradiation and the safety evaluation,in order to provide some reference for the subsequent application of irradiation sterilization of traditional Chinese medicine.

Objective To predict the potential suitable habitat of Haemaphysalis concinna in Heilongjiang Province under different climatic scenarios. Methods The geographic locations of ticks in Heilongjiang Province from 1980 to 2022 were captured from literature review and field ticks monitoring data from Harbin Center for Disease Control and Prevention in Heilongjiang Province, and the tick distribution sites with spatial correlations were removed using the software ArcGIS 10.2. The environment data under historical climatic scenarios from 1970 to 2000 and the climatic shared socioeconomic pathways (SSP) 126 scenario model from 2021 to 2040 and from 2041 to 2060 were downloaded from the WorldClim website, and the elevation (1 km, 2010), population (1 km grid population dataset of China, 2010) and annual vegetation index (1 km, 2010) data were downloaded from the Resource and Environmental Science and Data Center, Institute of Geographical Sciences and Natural Resources, Chinese Academy of Sciences. The contribution of environmental factors to H. concinna distribution was evaluated and environmental variables were screened using the software MaxEnt 3.4.1 and R package 4.1.0, and the areas of suitable habitats of H. concinna and changes in center of gravity were analyzed using the maximum entropy model in Heilongjiang Province under different climatic scenarios. In addition, the accuracy of the maximum entropy model for prediction of H. concinna distribution was assessed using the area under curve (AUC) of the receiver operating characteristic curve. Results A total of 79 H. concinna distribution sites and 24 environmental variables were collected, and 70 H. concinna distribution sites and 9 environmental factors that contributed to distribution of the potential suitable habitats of H. concinna in Heilongjiang Province were screened. The three most significant contributing factors included precipitation seasonality, annual precipitation, and mean temperature of the driest quarter, with cumulative contributions of 60.7%. The total area of suitable habitats of H. concinna was 29.05 × 10⁴ km² in Heilongjiang Province under historical climatic scenarios, with the center of gravity of suitable habitats located at (47.31° N, 129.16° E), while the total area of suitable habitats of H. concinna reduced by 0.97 × 10⁴ km² in Heilongjiang Province under the climatic SSP126 scenario from 2041 to 2060, with the center of gravity shifting to (47.70° N, 129.28° E). Conclusions The distribution of suitable habitats of H. concinna strongly correlates with temperature and humidity in Heilongjiang Province. The total area of potential suitable habitats of H. concinna may appear a tendency towards a decline with climatic changes in Heilongjiang Province, and high-, medium- and low-suitable habitats may shift.

Objective:To investigate the clinical features of pregnant associated Takotsubo cardiomyopathy (PTCM).Methods:We reviewed reported PTCM cases published from January 2007 to June 2022 using the keywords "Tako-tsubo cardiomyopathy""Takotsubo cardiomyopathy" "stress cardiomyopathy" AND "parturition" "pregnancy" "cesarean delivery" "postpartum" "peripartum" "eclampsia" "abortion" in Pubmed and Web of Science databases and the corresponding Chinese words in Wanfang and Chinese Medical Journal Network. Age, obstetric history, mode of delivery, mode of anesthesia, etiological factors, clinical manifestations, treatment, and prognosis of PTCM were recorded. Descriptive statistical analysis was adopted.Results:A total of 55 articles were included, covering 60 patients with PTCM. (1) Age and time of onset: The age of onset was (32.4±6.0) years old. PTCM occurred most frequently during labor [42% (25/60)] and within one day postpartum [32% (19/60)] and during the gestational period [13%(8/60), 33.0 weeks (24.5-37.7 weeks)]. (2) Delivery-related factors: There were 38% (16/42) primiparas and 60% (25/42) multiparas. Among them, 67% (38/57) and 18% (10/57) were delivered by cesarean section and vaginal delivery, respectively. PCTM often lacks obvious triggers [40% (24/60)], with the most common inducing factor being pregnancy-related diseases [27% (16/60)]. (3) Clinical features: The initial symptoms of PTCM were dyspnea [44% (26/59)], followed by chest pain accompanied by dyspnea [17% (10/59)]. The most common subtype of PTCM was the apical type [45% (26/58)], followed by the basal type [24% (14/58)], while the biventricular type was the least common [3% (2/58)] in the PTCM classification. The left ventricular ejection fraction was (31.6±12.1) % at the onset of PTCM, which recovered to (58.2±7.6) % at discharge. PCTM was often complicated by pulmonary edema [67% (40/60)] and cardiogenic shock [55% (33/60)]. (4) Treatment and prognosis: Patients with PCTM usually require noninvasive or invasive ventilator-assisted ventilation [40% (23/58)]. One pregnant woman and five neonates died, while the remaining patients recovered well.Conclusions:PTCM should be considered in differential diagnosis of patients experiencing dyspnea and chest pain during labor and pregnancy. PTCM patients are younger and have more pulmonary edema and cardiogenic shock. Mechanical ventilation is often required, but the prognosis is favorable.

Deinagkistrodon acutus(also known as the five-paced viper and the traditional Chinese medicine ingredient is called Agkistrodon) venom is a viscous liquid from the venom glands of the Deinagkistrodon acutus. It contains a variety of protein and peptide components such as phospholipase A2, serine protease, metalloproteinase, C-type lectin, L-amino acid oxidase, and has a variety of biological activities, playing an important role in anti-tumour, anti-thrombotic, anti-inflammatory and anti-bacterial activities. In recent years, snake venom research has become increasingly widespread, but there is still a lack of comprehensive and systematic studies on snake venom from Deinagkistrodon acutus. In this paper, the source, identification, active ingredients, toxicity studies and quality researches of Deinagkistrodon acutus venom are summarized and analysed by searching the related research progress, in order to provide reference for further development and utilization of Deinagkistrodon acutus venom.

Objective:To explore the morbidity, clinical features and mortality of unilateral pulmonary edema (PE) in the intensive care unit (ICU).Methods:Clinical data of PE patients in ICU between January 2018 and January 2021 were retrospectively collected. All patients were divided into the bilateral PE and unilateral PE groups according to imaging manifestations. Etilogy, clinical performance, cardiac ultrasound parameters, complications, treatment and prognosis were compared between the two groups. Binary logistic regression analysis was used to screen out the risk factors of death.Results:Of the 314 PE patients, 14 (4.5%) were unilateral PE patients , and 11 (78.5%) were right-sided unilateral PE. There were no differences in age, gender, heart rate, respiratory rate and left ventricular eject fraction between the unilateral and bilateral PE groups. Compared with the bilateral PE group, systolic and diastolic blood pressure were significantly lower in the unilateral PE group [128 (102.7-138) mmHg vs. 135 (116-166) mmHg, 72 (54-88.2) mmHg vs. 82 (69-97.7)mmHg, respectively]. The incidence of cardiac arrest and hospital mortality were higher in the unilateral PE group [28.6% vs. 8.0%, 42.9% vs. 10%, all P<0.05]. Binary logistic regression analysis showed that age, unilateral PE, and use of vasoactive agent were associated with poor prognosis. Odds ratio of unilateral PE and use of vasoactive agent were 17.78 and 11.67, respectively. Conclusions:Unilateral PE is not rare, which is an independent risk factors for mortality and should be promptly recognized to avoid delays in treatment.

Objective:To investigate the relationship between the serum alkaline phosphatase (ALP), prostate specific antigen (PSA) and bone metastasis in initially diagnosed prostate cancer (PCa) patients in different ISUP(International Society of Urological Pathology)groups.Methods:The 368 initial diagnosed prostate cancer patients recruited from January 2013 to December 2018 were retrospectively analyzed, including 247 cases in the Third Affiliated Hospital of Sun Yat-sen University, 111 cases in the Yuebei People's Hospital Affiliated to Medical College of Shantou University and 10 cases in Shenzhen Hospital of Southern Medical University. According to whether there was bone metastasis at the initial diagnosis, it was divided into 230 cases in the bone metastasis group and 138 cases in the non bone metastasis group. There was no significant difference between the two groups in age [(71.9±9.4) years and (71.2±8.7) years], body mass index (BMI) [(23.1±3.7) kg/m 2 and (23.7±2.6) kg/m 2]. There were significant differences in PSA [(307.3±847.0) ng/ml and (84.5±257.3) ng/ml] and ALP [(174.5±270.8) U/L and (71.0±23.2) U/L] between the two groups. In different PSA subgroups, there were 45 cases in PSA <10 ng/ml, 35 cases in PSA 10-20 ng/ml and 288 cases in PSA >20 ng/ml. The differences of ALP and PSA between bone metastasis group and non-bone metastasis group based on different ISUP stratification were analyzed, ROC curves were used to predict their risks of bone metastasis. Results:There were 3(1.3%), 22(9.6%), 34(14.8%), 85(37.0%) and 86 (37.4%) prostate cancer patients with bone metastasis from ISUP group 1 to 5, and 14(10.1%), 19(13.8%), 29(21.0%), 32(23.2%) and 44(31.9%) without bone metastasis, respectively. There was significant difference in the serum ALP levels between the bone metastasis group and the boneless metastasis group in the ISUP group 4(157.6±207.7 vs. 66.5±17.0) and 5(189.4±257.5 vs. 69.2±18.4)( P<0.001) and PSA levels had difference in the ISUP group 3(240.3±313.0 vs. 42.4±42.1), 4(152.3±184.5 vs. 44.7±33.3) and 5(435.2±1006.3 vs. 60.8±84.8)( P<0.001). There was statistically significant between the bone metastasis group and the without(336.1±882.2 vs. 139.3±328.1) when PSA>20 ng/ml( P=0.006). ROC curve analysis: the cut-off values of ALP were 115.5, 109.0, 75.5 and 86.0 U/L from ISUP group 2 to 5 respectively, the sensitivity was 23.8%, 56.5%, 66.4% and 50.6% respectively, the specificity was 99.7%, 93.4%, 78.3% and 89.2% respectively, and the accuracy were 59.4%, 73.1%, 69.7% and 63.3%, respectively. The cut-off values of PSA were 39.5, 93.1, 54.2 and 28.9 ng/ml from ISUP group 2 to 5 respectively, the sensitivity was 64.4%, 68.4%, 87.4% and 88.3% respectively, and the specificity was 79.5%, 90.6%, 63.7% and 61.6% respectively, and the accuracy were 71.6%, 78.1%, 80.1% and 79.2%, respectively. Conclusion:ALP increased significantly in ISUP group ≥4 and PSA in ISUP group ≥3, which related to bone metastasis in patients with initial diagnosed prostate cancer.

Objective:To evaluate the application of 3D printed osteotomy template in total knee arthroplasty (TKA) for valgus knee.Methods:A retrospective analysis was performed of the 21 patients with valgus knee who had undergone TKA at Department Ⅰ of Joint Surgery, Orthopaedics Hospital of Zhengzhou from March 2016 to February 2018. They were 5 males and 16 females, aged from 62 to 78 years (average, 66.7 years). TKA was performed with the assistance of a 3D printed personalized osteotomy template for each patient. The efficacy of the personalized osteotomy templates was evaluated by comparing the femorotibial angle, knee range of motion, Hospital for Special Surgery (HSS) knee scores of the patients between preoperation and postoperation.Results:The 21 patients were followed up for a mean duration of 16.3 months(range, from 10 months to 4 years). All incisions healed by the first intention. The last follow-ups showed that their preoperative femorotibial angle 17.6°±5.7° was improved significantly to 6.3°±1.2°, their preoperative knee range of motion 71.3°±5.8° increased significantly to 102.4°±7.5°, and their preoperative HSS scores 38.2±5.7 increased significantly to 87.5±3.5 ( P<0.001). Their radiographic evaluation at the last follow-up showed stable prosthetic components with no implant loosing or osteolysis. Conclusion:A personalized 3D printed osteotomy template can be used in TKA for valgus knee, leading to accurate osteotomy, effective correction of mechanical alignment and satisfactory clinical outcomes.

Objective To establish a method for analyzing total polysaccharide content and its monosaccharide composition in the caulis polygoni multiflori mixture. Methods The polysaccharides of the caulis polygoni multiflori mixture were extracted by water-extraction and alcohol-precipitation. After the treatment with phenol-sulfuric acid, the content of total polysaccharides in the preparation was determined by ultraviolet spectrophotometry. In addition, after the polysaccharide was hydrolyzed into monosaccharides wtih trifluoroacetic acid, the hyrolysate was derivatized with PMP, and then the PMP derivates of monosaccharides were analyzed by HPLC method. Yilite krosmasil C₁₈(4.6 mm×250 mm, 5 μm) was used at 30 ℃. Acetonitrile-0.1% NaH₂PO₄ (pH=6.8) (16:84) was the moblie phase with a flow rate of 1.0 ml/min. The detecting wavelength was at 250 nm. The injection volume was 20 μl. Results concentration of D-anhydrous glucose in the range of 21 ~ 105 μg/ml had a good linear relationship with the absorbance. The linear regression equation was A= 0.007x+0.0105, r=0.9982. The average recovery rate was (100.45±1.57)% (n=6). The average contents of total polysaccharides in four batches of samples were 14.24, 21.09, 17.85 and 18.17 mg/ml. The polysaccharide of the caulis polygoni multiflori mixture mainly consisted of D-mannose, D-glucosamine D-hydrochloride, D-Galacturonic acid, D-glucose, galactose, L-arabinose. The monosaccharides peak area ratios were about 9.10:0.26:1.00:3.02:4.14:2.12. Conclusion The method is accurate and reliable, and can be used for the determination of total content of polysaccharides and the analysis of monosaccharide composition in the preparation.

Objective:To evaluate the application of a 3D printed positioner for hip rotation center in total hip arthroplasty.Methods:From August 2015 to December 2017, 14 patients were treated by unilateral total hip arthroplasty at Department Ⅰ of Joint Surgery, Orthopaedics Hospital of Zhengzhou for avascular necrosis of femoral head or femoral neck fracture. They were 8 males and 6 females with an average age of 51.8 years (from 37 to 65 years). All their surgeries were assisted by a 3D printed positioner for hip rotation center. Postoperatively, the abduction and anteversion of acetabular cup and the hip rotation center were measured, the agreement between the hip rotation center of the affected side (O2) and the anatomical rotation center of the healthy side (O1) was assessed, and the function of the affected hip and complications were recorded at the last follow-up.Results:The 14 patients were followed up for an average of 18 months (from 6 to 24 months). The postoperative ordinates of O2 and O1 were respectively 19.36 mm±3.61 mm and 18.33 mm±3.41 mm while their abscissas 39.93 mm±2.97 mm and 39.99 mm±3.16 mm, indicating agreement between O2 and O1 ( P>0.05). The postoperative abduction and anteversion of the cup were within a normal range (39.3°±3.2°and 14.6°±1.2°, respectively). The last follow-up showed that their preoperative Harris hip scores (42.3±3.2) were significantly improved (94.3±4.7) ( t=2.873, P=0.002) and that 13 cases were rated as excellent and one as good. X-ray follow-up showed good position of their acetabular prostheses, no loosening of the cups or femoral prostheses, and no heterotopic ossification. Conclusion:A 3D printed positioner for hip rotation center can effectively assist reconstruction of the hip rotation center and accurate implantation of acetabular prosthesis in total hip arthroplasty.