ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective:To determine incidence of seasonal influenza virus infection in the community and to analyze the factors influencing seasonal influenza virus infection.Methods:This study recruited residents aged 6-59 years to build a cohort in 15 villages/streets in Macheng city in November 2019. Meanwhile, a cross-sectional baseline survey was conducted immediately to collect sera, information on demographics and child protection knowledge, behaviors, as well as attitudes using a questionnaire from the participants enrolled in the cohort (i.e., before the influenza epidemic season). In July 2020, a cross-sectional follow-up survey was conducted to collect sera once again (i.e., after the influenza season). Paired sera from the two cross-sectional surveys were tested for influenza virus-specific antibodies by hemagglutination inhibition (HI) test or micro-neutralization (MN) test using a circulating representative strain of each subtype/lineage of influenza virus as the test antigen. The infections with influenza virus subtype/lineage was confirmed if there was a four-fold or more increase in titers of antibodies against circulating representative strain of the subtype/lineage of influenza virus. Factors influencing infection with influenza A (H3N2) and B/Victoria viruses were analyzed using univariable and multivariable logistic regression.Results:In November 2019, 800 study participants were enrolled in the cohort, including 340 children aged 6-17 years and 460 adults aged 18-59 years; 605 study participants (including 224 children and 381 adults) were followed up in July 2020 and their paired sera were obtained before and after the influenza season. 25.3% (153/605) of the participants were confirmed to be infected with at least one subtype/lineage of seasonal influenza virus by HI and MN tests. The overall incidence of influenza viruses of all subtypes/lineages in children was 44.2% (95% CI: 37.6%-50.8%) which was significantly higher than the incidence of 14.1% in adults (95% CI: 10.7%-17.7%). Children had the highest incidence of influenza A (H3N2) virus infection, followed by B/Victoria. MN or HI antibody titers in A (H3N2)[ OR=0.88 (95% CI: 0.84-0.93)] and B/Victoria[ OR=0.97 (95% CI: 0.95-0.99)] before the influenza season were significantly associated with whether children were infected with that subtype/lineage of influenza virus. Conclusions:The residents aged 6-59 years in Macheng city had a substantial incidence of seasonal influenza virus infection during the influenza season from winter 2019 to spring 2020. Notably, almost half of children aged 6-17 years have been infected with seasonal influenza virus. Higher titers of HI/MN antibodies against seasonal influenza virus before the influenza season would be likely to reduce the risk of infection with influenza A (H3N2) and B/Victoria.

Purpose: Precise electrode placement is crucial for the success of sacral neuromodulation (SNM). The aim of this study was to explore a more accurate and convenient method for positioning punctures during the first stage of SNM. Methods: This retrospective study compared preoperative baseline values, intraoperative indicators, postoperative scores, and other clinical data from 130 patients who underwent SNM electrode implantation at our department between 2018 and 2023. The patients were divided into an experimental group and a control group to assess the advantages and feasibility of augmented reality (AR)-guided sacral nerve electrode implantation. Results: The experimental group experienced fewer intraoperative puncture attempts and achieved more accurate AR-guided localization punctures. Additionally, there were more responsive electrode contact points (2.74±0.51 vs. 2.46±0.74) and a lower initial voltage postimplantation (1.09±0.39 V vs. 1.69±0.43 V). The number of intraoperative x-ray fluoroscopies was significantly lower in the experimental group than in the control group (5.94±1.46 vs. 9.22±1.93), leading to a shorter overall operation time (61.32±11.27 minutes vs. 83.49±15.84 minutes). Furthermore, there was no need for additional local anesthetic drugs during the surgery in the experimental group. Comparative observations revealed no significant differences in intraoperative blood loss or the sacral hole location for electrode implantation between the 2 groups. Although the incidence of wound infection and the rate of permanent implantation in stage 2 were similar in both groups, the pain score on the first day postoperation was significantly lower in the experimental group than in the control group (2.62±0.697 vs. 2.83±0.816). Conclusions AR-guided sacral nerve modulation implantation can reduce both the number of punctures and the duration of the operation while ensuring safety and effectiveness. This technique can enhance the contact points of the response electrode, effectively lower the initial response voltage, and stabilize the electrode.

[Objective] To determine the feasibility of preparing plasminogen (Pg) with Fraction Ⅲ precipitation (hereinafter referred to as FⅢ-P) from low-temperature ethanol process by full chromatography (hereinafter referred to as FⅢ-P process). [Methods] The FⅢ-P was diluted with dissolution buffer at different dilution times and stirring time. The potency and antigen concentration of Pg in dissolution sample were detected and the dissolution and clarification conditions were determined. Pre-treatment of loading sample and pre-experiment of affinity chromatography were carried out on the FⅢ-P dissolution sample to judge whether the loading sample had an impact on the chromatography by observing the performance of the affinity chromatography column and to evaluate whether the affinity chromatography could achieve the purpose of purifying Pg by detecting the plasma protein antigen concentration and Pg potency of the samples in the process. Two batches of FⅢ-P process were studied step by step, and the specific activity, steps and total recovery, and the output of Pg per ton of plasma were calculated. The feasibility of preparing Pg by FⅢ-P process was evaluated by comparing with the data of full chromatography process using plasma as raw material (hereinafter referred to as plasma process). [Results] The FⅢ-P was dissolved with 10 times of dissolution buffer, stirred for 1 hour, centrifuged at room temperature of 10 000×g for 15 minutes. The supernatant was first filtered with a screen, then clarified with an 8/0.8 μm filter, and finally filtered with a 0.45/0.2 μm filter and loaded. Pre-test showed that from clarification and filtration to Pg affinity chromatography, the step recovery of activity and antigen was 39.51% and 108.64%, respectively, the antigen concentration of Pg increased by 31.16 times and the activity increased by 11.39 times after affinity chromatography, which reaching the effect of affinity chromatography purification of Pg. The results of 2 batches of step-by-step scale-up FⅢ-P process showed that the total recoveries of antigen and activity from plasma to SP chromatography of FⅢ-P process were (45.76±1.10)% and (24.15±0.59)%, respectively, which had a total loss of about 1/3 of antigen and about 2/3 of activity compared to the plasma process. The Pg specific activity of SP chromatography eluent was (4.68±0.25) U/mg, which was about half of that of plasma process, but meeted the internal standard of > 4 U/mg. The output of Pg antigen per ton of plasma in the FⅢ-P process was 68.73% of that in the plasma process, and the output of Pg activity per ton of plasma in the plasma process was 29.82% of that in the plasma process, which basically achieved the purpose of waste utilization of FⅢ-P. [Conclusion] The technical route of preparing Pg from FⅢ-P by full chromatography is feasible.

Objective To design a novel oxygenator to solve the existing problems of extracorporeal membrane oxygenation(ECMO)machine in high transmembrane pressure difference,low efficiency of blood oxygen exchange and susceptibility to thrombosis.Methods The main body of the oxygenator vascular access flow field was gifted with a flat cylindrical shape.The topology of the vascular access was modeled in three dimensions,and the whole flow field was cut into a blood inlet section,an inlet buffer,a heat exchange zone,a blood oxygen exchange zone,an outlet buffer and a blood outlet section.The oxygenator was compared with Quadrox oxygenator by means of ANSYS FLUENT-based simulation and prototype experiments.Results Simulation calculations showed the oxygenator designed was comparable to the clinically used ones in general,and gained advantages in transmembrane pressure difference,blood oxygen exchange and flow uniformity.Experimental results indicated that the oxygenator behaved better than Quadrox oxygenator in transmembrane pressure difference and blood oxygen exchange.Conclusion The oxygenator has advantages in transmem-brane pressure difference,temperature change,blood oxygen ex-change and low probability of thrombosis.[Chinese Medical Equipment Journal,2024,45(3):23-28]

Endodontic diseases are a kind of chronic infectious oral disease.Common endodontic treatment concepts are based on the removal of inflamed or necrotic pulp tissue and the replacement by gutta-percha.However,it is very essential for endodontic treatment to debride the root canal system and prevent the root canal system from bacterial reinfection after root canal therapy(RCT).Recent research,encompassing bacterial etiology and advanced imaging techniques,contributes to our understanding of the root canal system's anatomy intricacies and the technique sensitivity of RCT.Success in RCT hinges on factors like patients,infection severity,root canal anatomy,and treatment techniques.Therefore,improving disease management is a key issue to combat endodontic diseases and cure periapical lesions.The clinical difficulty assessment system of RCT is established based on patient conditions,tooth conditions,root canal configuration,and root canal needing retreatment,and emphasizes pre-treatment risk assessment for optimal outcomes.The findings suggest that the presence of risk factors may correlate with the challenge of achieving the high standard required for RCT.These insights contribute not only to improve education but also aid practitioners in treatment planning and referral decision-making within the field of endodontics.

Objective To analyze the medication rules of national patented Chinese herbal compounds for the treatment of diabetic peripheral neuropathy(DPN)by data mining method,and to provide reference for clinical medication.Methods The patents of Chinese medicine compound for the treatment of DPN were retrieved from the website of the China National Intellectual Property Administration(CNIPA).Excel 2021 was used for frequency statistics.RAW Graphs 2.0 was used to make a Sankey diagram of the efficacy of high-frequency Chinese medicinals.SPSS Statistics 25.0 software was used for hierarchical cluster analysis of the medicines,and the core prescriptions were mined based on Cytoscape 3.9.1.Results A total of 101 patented prescription were included,involving 243 herbs.The top three Chinese medicines in the descending order of occurrence frequency were Salviae Miltiorrhizae Radix et Rhizoma,Astragali Radix,and Paeoniae Radix Alba.Most of the medicines of patented Chinese medicine compounds for the treatment of DPN were warm and mild in nature,sweet,bitter and pungent in flavor,and had the meridian tropism of liver,heart and spleen meridians.According to the therapeutic actions,the medicine can be divided into tonic drugs,blood-activating and stasis-removing drugs,exterior-releasing drugs,liver-calming and wind-extinguishing drugs,heat-clearing drugs,bleeding-arresting drugs,mind-calming drugs,and urination-promoting and dampness-percolating drugs.The association rule analysis revealed the drug combination of Astragali Radix and Angelicae Sinensis Radix with the highest support.After hierarchical cluster analysis,the top 31 Chinese medicinals were classified into 7 groups.The core prescription which was composed of 7 medicines,namely Astragali Radix,Chuanxiong Rhizoma,Spatholobi Caulis,Salviae Miltiorrhizae Radix et Rhizoma,Achyranthis Bidentatae Radix,Cinnamomi Ramulus and Angelicae Sinensis Radix was finally mined out.Conclusion The treatment of DPN with patented Chinese herbal compounds is based on the therapies of supplementing deficiency,activating blood and removing stasis,and warming and unblocking meridians and collaterals.Meanwhile,consolidating the acquired foundation by strengthening spleen and soothing liver is also stressed.Clinically,the herbal pairs of Astragali Radix-Angelicae Sinensis Radix,Paeoniae Radix Alba-Salviae Miltiorrhizae Radix et Rhizoma are the optional drugs,and the core prescription composed of Astragali Radix,Chuanxiong Rhizoma,Spatholobi Caulis,Salviae Miltiorrhizae Radix et Rhizoma,Achyranthis Bidentatae Radix,Cinnamomi Ramulus and Angelicae Sinensis Radix can be used for the whole course of DPN.