Pancreatic cancer is a kind of highly malignant tumor with a low survival rate and poor prognosis. The effectiveness of gemcitabine as a first-line chemotherapy drug is limited; however, it can activate dendritic cells and improve antigen presentation which increase the sensitivity of tumor cell to immunotherapy. Although immunotherapy has made some advancements in cancer treatment, the therapeutic benefit of programmed cell death receptor 1/programmed death receptor-ligand 1 (PD-1/PD-L1) blockade therapy remains relatively low. The chemokine C-X-C chemokine ligand 12 (CXCL12) contributes to an immunosuppressive tumor microenvironment by recruiting immunosuppressive cells. The receptor C-X-C motif chemokine receptor 4 (CXCR4), highly expressed in various tumors including pancreatic cancer, plays a crucial role in tumor development and progression. In this study, the anti-tumor immune response of human peripheral blood mononuclear cell (hPBMC) was enhanced using the combination of BsNb PX4 (anti-PD-L1&CXCR4 bispecific nanobody) and gemcitabine. In a co-culture system of gemcitabine-pretreated hPBMCs with tumor cells, the BsNb PX4 synergized gemcitabine to improve the cytotoxic activity of hPBMCs against tumor cells. Flow cytometry analysis confirmed increased ratio of CD8⁺ to CD4⁺ T cells in combination treatment. In NOD/SCID mice bearing pancreatic cancer, the combination treatment exhibited more infiltration of CD8⁺ T cells into tumor tissues, contributing to an effective anti-tumor response. This study presents potential new therapies for the treatment of pancreatic cancer. Ethical approval was obtained for collection of hPBMC samples from the Local Ethics Committee of Shanghai Jiao Tong University. All animal experiments were approved by the Animal Ethic Committee of Shanghai Jiao Tong University (authorizing number: A2024246).

Human mass balance study is a pivotal research in the field of clinical pharmacology, aiming at elucidating the metabolic and excretion pathways of drugs in humans. Currently, human mass balance studies predominantly employ radiolabeling techniques. Recently, both the U.S. Food and Drug Administration (FDA) and the Center for Drug Evaluation (CDE) of the China National Medical Products Administration (NMPA) issued related research drafts and guidelines to encourage and guide the pharmaceutical industry to conduct research in compliance with established standards. The selection of radiolabeling sites is crucial for obtaining critical information on drug metabolism. However, in vivo biotransformation may lead to partial disintegration of the molecular structure, thereby resulting in the loss of metabolic product information of the unlabeled moiety. Administering drugs with different radiolabeling sites separately or in combination, or labeling multiple radioactive isotopes within one molecule, can effectively solve this problem. This article reviews relevant technological progress, analyzes radiolabeling strategies, and discusses the application of drugs with multiple radiolabeling sites in human mass balance studies.

ObjectiveTo investigate the effect of Rehmanniae Radix Praeparata on neurological function injury in ischemic stroke rats and explore its mechanism. MethodMale SD rats were randomized into sham operation， model， low- and high -dose （3.5 g·kg^-1 and 7 g·kg^-1） Rehmannia Radix Praeparata， and nimodipine （0.01 g·kg^-1） groups. The rat model of middle cerebral artery occlusion （MCAO） was established with the modified suture occlusion method. Zea-Longa 5-point scoring was employed to evaluate the neurological function of rats. The cerebral infarction volume was detected by 2，3，5-triphenyltetrazolium chloride （TTC） staining. Hematoxylin-eosin staining and Nissl staining were employed to observe the morphology and damage of the brain tissue. Meanwhile， the serum levels of lactate dehydrogenase （LDH）， oxidative stress-related indicators superoxide dismutase （SOD）， glutathione peroxidase 4 （GPX4）， and malondialdehyde （MDA）， and the iron （Fe） content in the brain tissue were determined. To explore the mechanism of Rehmanniae Radix Preparata in mitigating the neurological damage in ischemic stroke rats， Western blotting was employed to determine the expression levels of proteins in the ischemic brain tissue. The autophagy-associated proteins included autophagy effector （beclin-1）， microtubule-associated protein light chain 3 （LC3B）， and ubiquitin-binding protein p62 （p62）. The ferroptosis-associated proteins included transferrin （TF）， transferrin receptor 1 （TFR1）， ferritin heavy chain 1 （FTH1）， and ferropotin （FPN1）. The neurological function injury-associated proteins included brain-derived neurotrophic factor （BDNF） and tyrosine kinase receptor B （TrkB）. ResultCompared with the sham operation group， the model group showed increased neurological function score， cerebral infarction volume， and appearance of nuclear pyknosis and vacuole of cells in the cerebral cortex. In addition， the model group presented elevated levels of LDH， MDA， and Fe （P<0.01） and lowered levels of SOD and GPX4 （P<0.01）. Compared with the model group， Rehmanniae Radix Praeparata decreased the content of LDH， MDA， and Fe （P<0.05， P<0.01） and elevated the levels of SOD and GPX4 （P<0.05， P<0.01）. Compared with the sham operation group， the modeling promoted the expression of beclin-1，LC3B Ⅱ/Ⅰ， TF， and TFR1 and inhibited the expression of p62， FTH1， FPN1， BDNF， and TrkB （P<0.01）. The expression levels of these proteins were recovered after the treatment with Rehmanniae Radix Praeparata. ConclusionRehmanniae Radix Praeparata may inhibit ferroptosis and improve the neurological function in ischemic stroke rats by down-regulating the autophagy level in the brain tissue.

As a practical carrier for promoting the tiered diagnosis and treatment model, the medical consor-tium is of great significance for balancing medical resources and boosting medical service efficiency. The construction of medical consortiums not only improves the accessibility of high-quality medical resources for patients, but also enhances the diagnostic and treatment level of member units. Meanwhile, it provides space for the leading hospital to adjust the structure of diseases and improve the level of discipline construction. As the core of medical insurance payment reform, DRG, through indicators such as the case mix index(CMI) and the number of diagnosis related group (DRG), provides objective and quantified data support for case management and disease structure optimization, thus effectively guiding the rational allocation of medical resources and the adjustmentof diseases and surgical types within the medical consortium. Comprehensive use of DRG evaluation indicators can construct a multidimensional medical consortium construction evaluation system, provides a clear direction for medical consortium cooperation, thereby promoting the overall healthy and sustainable development of medical consortiums and achieving a win-win situation for all parties involved. This paper, based on the "1+5+1" medical consortium cooperation model centered around Peking Union Medical College Hospital, utilizes DRG indicators to analyze the benefits for patients, member hospitals, and the leading hospital during the medical consortium construction process, with the hope of providing reference for the construction of a medical consortium evaluation system.

Objective To study the factors influencing the blood concentration of caspofungin(CPFG),construct a prediction model,and validate the predictive effect of the model,so as to provide reference for the individualised dosing of patients with fungal infections in haematology.Methods Seventy-five patients admitted to the Department of Haematology,General Hospital of Tianjin Medical University,who were treated with CPFG for antifungal therapy during the period of March 2021 to June 2022 were selected as the study subjects,and CPFG blood concentration monitoring was carried out to explore the influencing factors of CPFG blood concentration and to construct a prediction model accordingly.Hosmer-Lemeshow(H-L)was used to test the goodness-of-fit of the model,and another 30 patients were selected as the verification group,and the predictive effect of the model was verified by the receiver's operating characteristics(ROC)curve.Results The mean blood concentrations of the patients at 0.5,9 and 24 h were(12.54±4.38),(6.80±2.76),(4.13±2.16)μg·mL-1,and the mean AUC0-24h were(152.05±57.60)μg·mL-1·h.AUC0-24h was lower than the reference value(98 μg·mL-1·h)in two patients.The results of correlation analysis showed that gender showed a correlation with 0.5 h blood concentration(P＜0.05),and there was no correlation with the rest of the two time points blood concentration and AUC0-24h(P＞0.05).Body weight and albumin(Alb)concentration showed correlation with 0.5,9,24 h blood drug concentration and AUC0-24 h(P＜0.05),and the rest of the indicators showed no correlation with blood drug concentration and AUC0_24h at each time point(P＞0.05).The results of multifactorial analysis showed that the factors influencing the patients'0.5 h blood concentration were gender,Alb concentration and body weight,and the factors influencing the 9 and 24 h blood concentration and AUC0-24h were Alb concentration and body weight(P＜0.05).Correlation analysis showed that the daily dose was positively correlated with the plasma concentration of CPFG at 0.5,9 and 24 h and AUC0-24h(P＜0.05).The results of multivariate analysis showed that the daily dose was also one of the influencing factors of the plasma concentration of CPFG(P＜0.05).ROC curve shows that the model has good prediction ability.Conclusion Body weight and Alb are significantly associated with CPFG blood concentrations and area under the drug-time curve,which can be used as a basis for preventive risk avoidance.

Objective Hypertriglyceridemic waist(HW),hypertriglyceridemic waist-to-height ratio(HWHtR),and waist-to-hip ratio(WHR)have been shown to be indicators of cardiometabolic risk factors.However,it is not clear which indicator is more suitable for children and adolescents.We aimed to investigate the relationship between HW,HWHtR,WHR,and cardiovascular risk factors clustering to determine the best screening tools for cardiometabolic risk in children and adolescents. Methods This was a national cross-sectional study.Anthropometric and biochemical variables were assessed in approximately 70,000 participants aged 6-18 years from seven provinces in China.Demographics,physical activity,dietary intake,and family history of chronic diseases were obtained through questionnaires.ANOVA,x2 and logistic regression analysis was conducted. Results A significant sex difference was observed for HWHtR and WHR,but not for HW phenotype.The risk of cardiometabolic health risk factor clustering with HW phenotype or the HWHtR phenotype was significantly higher than that with the non-HW or non-HWHtR phenotypes among children and adolescents(HW:OR = 12.22,95%CI:9.54-15.67;HWHtR:OR = 9.70,95%CI:6.93-13.58).Compared with the HW and HWHtR phenotypes,the association between risk of cardiometabolic health risk factors(CHRF)clustering and high WHR was much weaker and not significant(WHR:OR = 1.14,95%CI:0.97-1.34). Conclusion Compared with HWHtR and WHR,the HW phenotype is a more convenient indicator with higher applicability to screen children and adolescents for cardiovascular risk factors.

Objective To explore the modal testing method for the three-axis manned centrifuge under elastic boundary conditions with considerations on its complicated structure and high rotational inertia.Methods Modal testing was carried out with a three-axis manned centrifuge under elastic boundary conditions as the subject and a force hammer as the excitation source according to GJB 2706A-2008 Modal tests method for spacecraft and GB/T 11349.3-1992 Experimental determination of mechnical mobility measurements using impact excitation.Four times of hammering were carried out at each excitation position,and the data of the four times of hammering underwent linear average computation.Data acquisition was implemented with a three-axis accelerometer and a 64-channel data collector,and the modal data were analyzed using a frequency response function based on the Test.Lab modal test and analysis software.Results The coherence coefficient of the excitation signal was not lower than 0.8 in the 30 Hz band;the first three orders of the system's intrinsic vibrations were all torsional vibrations,with the frequencies of 9.15,15.66 and 19.22 Hz,respectively;the first order frequency of the system was about 9.15 Hz for both Z18 and Z21 excitation positions,and each of the second and third order frequencies similar situations were observed for also had a roughly equal value for the two excitation positions.Conclusion The force hammer testing method is applicable for the modal testing of the three-axis manned centrifuge,ensuring equipment safety and subject comfort.Referen-ces are provided for the following structural optimization design.[Chinese Medical Equipment Journal,2024,45(8):38-43]

Objective To explore feasibility of 3D metal printing technology combined with virtual design proximal clavicle anatomical plate.Methods A 52-year-old male healthy volunteer was retrospectively selected to design proximal clavicle anatomical plate system by using Mimics15.01,NX12.0 and other software.STL data were input into 3D printer to print 1∶1 clavicle model and proximal clavicle anatomical plate.The fit of the plate was tested in vitro and the accuracy of screw position was evaluated by imaging.Printing time of model,nail path design and fabrication time of the anatomical plate at proximal clavicle were recorded.Results The 3D metal printing proximal clavicle anatomical plate fitted well to clavicle model,orienta-tion of proximal clavicle locking screw was accurate,and X-ray and CT scan showed the screw position was good.Printing time of model,the time of nail path design,and the time of making anatomical plate of proximal clavicle were 120,15 and 300 min respectively.Conclusion The proximal clavicular anatomical plate system based on 3D metal printing technology could achieve good lamination of proximal clavicular fracture plate and precise screw placement,providing a new and accurate surgical method for the treatment of the proximal clavicular fracture.

Objective To explore establishment and finite element analysis of personalized proximal clavicular anatomical plate screw fixation model.Methods A 40-year-old male healthy volunteer was selected and the finite element analysis modules of 3D reconstruction software Mimics 15.01,Hypermesh 2019 and Abaqus 2020 were used.The finite element model of anatomic plate at the proximal clavicle was established,and a vertical load of 250 N was applied to the distal end of long axis of clavicle about 15 mm,then the overall structure,plate and screw displacement cloud image,Mises stress distribution were ob-served.Results The displacement distribution of the overall structure shows the maximum displacement was distributed on the distal clavicle.Under the four conditions of normal upper limb weight,longitudinal clavicle fracture,oblique fracture and shoulder impact violence during fall,longitudinal clavicle fracture and oblique fracture,the maximum displacement were 1.04 mm,1.03 mm,1.35 mm and 1.33 mm,respectively.The displacement cloud map of titanium alloy steel plate showed the largest displacement was distributed near the distal clavicular bone,and the maximum displacement were 0.89 mm,0.88 mm,1.10 mm and 1.09 mm,respectively.The displacement cloud map of titanium alloy screw showed the largest displacement was distribut-ed at the root of the distal screw,and the maximum displacement were 0.88 mm,0.87 mm,1.08 mm and 1.06 mm,respectively.Mises stress distribution showed the maximum stress was mainly distributed on titanium alloy plates and screws,and the stress on the clavicle was very small.Mises stress distribution cloud showed the maximum Mises stress was distributed at the second row of screw holes near the clavicle,and the maximum Mises stress were 673.1,678.1,648.5,654.4 MPa,respectively.The maximum stresses of titanium alloy screws were 414.5,417.4,415.8 and 419.7 MPa,respectively.Conclusion The biomechan-ical changes of personalized proximal clavicular anatomical plates are demonstrated by using 3D finite element method to pro-vide biomechanical data for personalized proximal clavicular anatomical plates.

The prevalence of Lyme disease in endogenous populations in Urumqi,Xinjiang was investigated.In total,795 serum samples were collected from residents of three townships in the surrounding area of Urumqi City from 2022 to 2023,which included 383 from Lucaogou Town,145 from Shuixigou Town,and,267 from Tori Township.Serum levels of IgG and IgM antibodies were screened with an enzyme linked immunosorbent assay(ELISA)and confirmed by western blot(WB)analysis.Clinical data of WB-positive indi-viduals were collected and comprehensive analysis was con-ducted for case diagnosis.The chi square test was used for statistical analysis of the results and the P＜0.05 was consid-ered statistically significant.In total,110(13.84％)of 795 samples were positive.The positivity rates was higher in females than males[16.26％(73/449)vs.10.69％(37/346),x2=5.076,P=0.024],while there was no significant difference among age groups(x2=2.569,P=0.766).The positivity rates for serum antibodies in Shuixigou Town,Lucaogou Town,and Tuoli Township were 17.98％(48/267),14.48％(21/145),and 10.70％(41/383),respectively,with a significantly higher rate in Tuoli Township than Lucaogou Town(x2=7.041,P=0.008).Of 110 individuals who were initially positive for IgG and IgM antibodies with the ELISA,82(10.31％)were con-firmed positive by WB analysis.In total,20(2.52％)patients were diagnosed with Lyme disease based on clinical manifesta-tions.Lyme disease is epidemic among the population in Urumqi,as the infection rate is higher than the national average.Hence,continued surveillance is recommended for prevention of Lyme disease.