Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective To introduce the modeling method of pendulum-like modified rat abdominal heart heterotopic transplantation model and evaluate the quality of the model. Methods An operator without transplantation experience performed 15 consecutive models, recorded the time of each step, changes in body weight and modified Stanford scores, and calculated the surgical success rate, postoperative 1-week survival rate and technical success rate. Ultrasound examinations was performed in 1 week postoperatively. Results The times for donor heart acquisition, donor heart processing, recipient preparation and transplantation anastomosis were (14.3±1.4) min, (3.5±0.6) min, (13.6±2.1) min and (38.3±5.2) min respectively. The surgical success rate was 87% (13/15), and the survival rate 1 week after operative was 100% (13/13). The improved Stanford score indicated a technical success rate of 92% (12/13), and the postoperative 1-week ultrasound examination showed that grafts with Stanford scores ≥3 had detectable pulsation and blood flow signals. Conclusions The pendulum-like modified rat abdominal heart heterotopic transplantation improved model further optimizes the operational steps with a high success rate and stable quality, may be chosen as a modeling option for basic research in heart transplantation in the future.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

Objective: Miniscrews are commonly utilized as temporary anchorage devices (TADs) in cases of maxillary protrusion and premolar extraction. This study aimed to investigate the effects and potential side effects of two conventional miniscrew configurations on the maxillary incisors. Methods: Eighty-two adult patients with maxillary dentoalveolar protrusion who had undergone bilateral first premolar extraction were retrospectively divided into three groups: non-TAD, two posterior miniscrews only (P-TADs), and two anterior and two posterior miniscrews combined (AP-TADs). Cone-beam computed tomography was used to evaluate the maxillary central incisors (U1). Results: The APTADs group had significantly greater U1 intrusion (1.99 ± 2.37 mm, n = 50) and less retroclination (1.70° ± 8.80°) compared to the P-TADs (–0.07 ± 1.65 mm and 9.45° ± 10.68°, n = 60) and non-TAD group (0.30 ± 1.61 mm and 1.91° ± 9.39°, n = 54).However, the AP-TADs group suffered from significantly greater apical root resorption (ARR) of U1 (2.69 ± 1.38 mm) than the P-TADs (1.63 ± 1.46 mm) and non-TAD group (0.89 ± 0.97 mm). Notably, the incidence of grade IV ARR was 16.6% in the AP-TADs group, significantly higher than the rates observed in the P-TADs (6.7%) and non-TAD (1.9%) groups. Multiple regression analysis revealed that after excluding tooth movement factors, the AP-TADs configuration resulted in an additional 0.5 mm of ARR compared with the P-TADs group. Conclusions In cases of maxillary protrusion and premolar extraction, the use of combined anterior and posterior miniscrews enhances incisor intrusion and minimizes torque loss of the maxillary incisors. However, this approach results in more severe ARR, likely due to the increased apical movement and composite force exerted.

The molecularly imprinted polymers membranes(MIPMs)were prepared for selective adsorption of lamotrigine(LTG)in plasma by surface molecular imprinting technology with polyvinylidenefluoride(PVDF)membranes as supporter,lamotrigine as template molecule,methyl methacrylate as functional monomer,ethylene glycol dimethacrylate as cross-linking agent,azodiisobutyronitrile as initiator and acetonitrile-dimethylformamide(1∶1.5,V/V)as pore-forming agent.The prepared MIPMs were characterized by scanning electron microscope,Fourier transform infrared spectroscopy,Brunaner-emmet-teller measurements,X-ray photoelectron spectroscopy,and thermogravimetric analysis.The adsorption properties of the materials were investigated by kinetic adsorption,isothermal adsorption,selective adsorption,adsorption-desorption and reusability experiments.The results showed that the imprinted layer of LTG was successfully coated on the surface of PVDF,and the materials had uniform particle size.The adsorption capacity and imprinting factor of the MIPMs towards LTG were 3.77 mg/g and 8.97,respectively.The nanomaterials showed fast mass transfer rate(30 min)and good reusability(the adsorption efficiency was 86.66%after 6 cycles),and could be used for the adsorption of LTG in plasma with low matrix interference,recoveries of 86.54%-90.48%and RSD of 1.51%-3.15%(n=5).The proposed LTG MIPMs were demonstrated to be simple and environment friendly,and had high selectivity in rapid separation and extraction of LTG in plasma.

Objective To summarize the epidemiological and clinical features of infectious diseases of the central nervous system(CNS)by a single-center analysis.Methods A retrospective analysis was conducted on the data of 1247 cases of CNS infectious diseases diagnosed and treated in the First Medical Center of PLA General Hospital from 2001 to 2020.Results The data for this group of CNS infectious diseases by disease type in descending order of number of cases were viruses 743(59.6％),Mycobacterium tuberculosis 249(20.0％),other bacteria 150(12.0％),fungi 68(5.5％),parasites 18(1.4％),Treponema pallidum 18(1.4％)and rickettsia 1(0.1％).The number of cases increased by 177 cases(33.1％)in the latter 10 years compared to the previous 10 years(P<0.05).No significant difference in seasonal distribution pattern of data between disease types(P>0.05).Male to female ratio is 1.87︰1,mostly under 60 years of age.Viruses are more likely to infect students,most often at university/college level and above,farmers are overrepresented among bacteria and Mycobacterium tuberculosis,and more infections of Treponema pallidum in workers.CNS infectious diseases are characterized by fever,headache and signs of meningeal irritation,with the adductor nerve being the more commonly involved cranial nerve.Matagenomic next-generation sequencing improves clinical diagnostic capabilities.The median hospital days for CNS infectious diseases are 18.00(11.00,27.00)and median hospital costs are ￥29,500(￥16,000,￥59,200).The mortality rate from CNS infectious diseases is 1.6％.Conclusions The incidence of CNS infectious diseases is increasing last ten years,with complex clinical presentation,severe symptoms and poor prognosis.Early and accurate diagnosis and standardized clinical treatment can significantly reduce the morbidity and mortality rate and ease the burden of disease.

BACKGROUND:Yougui Pill is a famous formula of the Chinese traditional medicine,which has good efficacy for lumbar disc herniation due to kidney yang insufficiency. OBJECTIVE:To investigate the potential targets and mechanism of action of Yougui Pill in the treatment of lumbar disc herniation by using network pharmacology and molecular docking technology,and verified by animal experiments. METHODS:(1)Network pharmacological analysis:We obtained the active ingredients and targets of Yougui Pill from TCMSP and other databases,collected genes related to lumbar disc herniation from GeneCards database,and took the intersection of the two for the topological analysis to derive the main active ingredients and core therapeutic targets.Gene ontology function analysis and Kyoto encyclopedia of genes and genomes pathway enrichment analysis were performed using R software.(2)Molecular docking:Autodock and Pymol software were utilized for the prediction of molecular binding energy of TCM active ingredients to core therapeutic targets.(3)Animal experiments:Eighteen Sprague-Dawley rats were randomly divided into a control group,a degeneration group and a Yougui Pill group,with 6 rats in each group.A rat model of intervertebral disc degeneration was prepared by fiber puncture method in the degeneration and Yougui Pill groups.At 2 weeks after modeling,Yougui Pill was given by gavage in the Yougui Pill group,once a day for 2 consecutive weeks.The level of tumor necrosis factor-α in serum was detected by the ELISA method,and morphological changes of the annulus fibrosus and nucleus pulposus cells were observed using hematoxylin-eosin staining. RESULTS AND CONCLUSION:There were 90 active ingredients and 64 targets,and the main active ingredients were found to be quercetin,kaempferol,β-carotene,soybean flavonoid,and 4'-O-methylnyasol.The core targets of Yougui Pill for the treatment of lumbar disc herniation were interleukin 6,tumor necrosis factor-α,AKT1,interleukin 1B,and vascular endothelial growth factor A.Enrichment analysis revealed that the intersecting genes might be expressed through the interleukin-17 signaling pathway,tumor necrosis factor signaling pathway,MAPK signaling pathway,PI3K-AKT signaling pathway,and other signaling pathways to improve intervertebral disc degeneration.The molecular docking test verified that quercetin,kaempferol,and β-carotene had strong binding ability to the core targets.Animal experiments showed that the level of serum tumor necrosis factor α in the degeneration group was higher than that in the control group(P<0.05),and the level of serum tumor necrosis factor α in the Yougui Pill group was lower than that in the degeneration group(P<0.05).Hematoxylin-eosin staining showed that the fibrous annulus of the intervertebral discs and the structure of the nucleus pulposus in the degeneration group were destroyed,and the number of nucleus pulposus cells was reduced;there was a tendency to reconstructing the fibrous annulus of the intervertebral discs in the Yougui Pill group,and the number of nucleus pulposus cells increased compared with the degeneration group.To conclude,Yougui Pill may treat lumbar disc herniation by improving disc degeneration through the effects of quercetin,kaempferol,beta-carotene and other key active ingredients on core targets such as tumor necrosis factor.

Objective To develop a time-resolved fluorescent immunoassay kit for the rapid,accurate and quantitative detection of S100B protein in serum and to evaluate its performance.Methods The test strip was prepared using time-resolved fluorescent microsphere-labeled anti-S100B polyclonal antibody and rabbit IgG antibody,labeling pads,sample pads,S100B nitrocellulose films and absorbent paper,and an S100B time-resolved fluorescence immunoassay kit was obtained by assembling the cartridge.The performance of the kit developed was evaluated by standard curve,accuracy,minimum detection limit,linear interval,specificity,reproducibility and stability.The reference intervals of 199 pieces of healthy human serum and plasma samples from a certain region were detected with the kit,and the clinical performance of the kit and Roche Elecsys S100 kit was tested by synchronous blind method to assess the consistency of the results of the two kits for 142 samples.Results The S100B time-resolved fluorescence immunoassay kit had the standard curve beingy=(1.133 02+1.752 24)/[1+(x/1.082 20)×(-0.603 52)]-1.752 24,R2=0.999 08 and the linear range being[0.05,30]ng/mL,which met the requirements of the relative deviation of the accuracy within±15％,the minimum detection limit not hgier than 0.05 ng/mL,the relative deviation of specificity within±15％and the coefficient of variation of intra-and inter-batch difference less than 15％.The stability test results indicated that the kit was valid for 12 months at 2-30 ℃ conditions.The reference intervals of serum and plasma samples measured by the kit were both lower than 0.3 ng/mL.Clinical trials showed that the results by the kit and Roche Elecsys S100 Assay Kit were in high agreement(Kappa=0.906 1＞0.80)and met the requirements.Conclusion The kit developed detects the concentration of S100B protein in serum quickly,accurately and quantitatively,and provides references for the diagnosis and treatment of neurological diseases,autoimmune diseases,cerebrovascular diseases and etc.[Chinese Medical Equipment Journal,2024,45(1):47-55]