Background: Traditionally, dental implants require a healing period of 4 to 9 months for osseointegration, with longer recovery times considered when bone grafting is needed. This retrospective study evaluates the clinical efficacy of demineralized dentin matrix (DDM) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) during dental implant placement to expedite the osseointegration period for early loading. Methods: Thirty patients (17 male, 13 female; mean age 55.0 ± 8.8 years) requiring bone grafts due to implant fixture exposure (more than four threads; ≥ 3.2 mm) were included, with a total of 96 implants placed. Implants were inserted using a two-stage protocol with DDM/rhBMP-2 grafts. Early loading was initiated at two months postoperatively in the mandible and three months in the maxilla. Clinical outcomes evaluated included primary and secondary stability (implant stability quotient values), healing period, bone width, and marginal bone level assessed via cone-beam computed tomography. Results: All implants successfully supported final prosthetics with a torque of 50Ncm, without any osseointegration failures. The average healing period was 69.6 days in the mandible and 90.5 days in the maxilla, with significantly higher secondary stability in the mandible (80.7 ± 6.7) compared to the maxilla (73.0 ± 9.2, p < 0.001). Histological analysis confirmed new bone formation and vascularization. Conclusion DDM/rhBMP-2 grafting appears to significantly reduce the healing period, enabling early loading with stable and favorable clinical outcomes.

BACKGROUND: Embryo-endometrium cross-talk is one of the critical processes for implantation, and unsuccessful cross-talk leads to infertility. We established an endometrium-embryo (or embryoid bodies, hEBs) in vitro model in 2D and 3D conditions and assessed its potential through the fusion of embryos and the expression of specific markers. METHODS: C57BL/6 mouse embryos and human embryoid body (hEB) derived from embryonic stem cells were prepared as embryo models. Mouse endometrium (EM) and human endometrium cell line, HEC-1-A, were prepared, and 2D or 3D EMs were generated. The viability of the 3D endometrium was analyzed, and the optimal ratio of the gelation was revealed. The invasion of the embryos or hEBs was examined by immunostaining and 3D image rendering. RESULTS: The embryos and the alternative hEBs were effectively fused into 2D or 3D vitro EM models in both mouse and human models. The fused embryos and hEBs exhibited migration and further development. Notably, the established in vitro model expressed Oct4 and E-Cadherin, markers for early embryonic development; human CG Receptor and Progesterone Receptor, critical for implantation and pregnancy maintenance; and TSH Receptor, Epiregulin, and Prolactin, indicators of endometrial receptivity and embryo implantation. CONCLUSION This study marks a significant advancement in the field, as we have successfully established a novel in vitro model for studying embryo-endometrium cross-talk. This model, a crucial tool for understanding fertility and the causes of miscarriage due to failed implantation, provides a unique platform for investigating the complex processes of successful implantation and pregnancy, underscoring its potential impact on reproductive health.

Background: Traditionally, dental implants require a healing period of 4 to 9 months for osseointegration, with longer recovery times considered when bone grafting is needed. This retrospective study evaluates the clinical efficacy of demineralized dentin matrix (DDM) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) during dental implant placement to expedite the osseointegration period for early loading. Methods: Thirty patients (17 male, 13 female; mean age 55.0 ± 8.8 years) requiring bone grafts due to implant fixture exposure (more than four threads; ≥ 3.2 mm) were included, with a total of 96 implants placed. Implants were inserted using a two-stage protocol with DDM/rhBMP-2 grafts. Early loading was initiated at two months postoperatively in the mandible and three months in the maxilla. Clinical outcomes evaluated included primary and secondary stability (implant stability quotient values), healing period, bone width, and marginal bone level assessed via cone-beam computed tomography. Results: All implants successfully supported final prosthetics with a torque of 50Ncm, without any osseointegration failures. The average healing period was 69.6 days in the mandible and 90.5 days in the maxilla, with significantly higher secondary stability in the mandible (80.7 ± 6.7) compared to the maxilla (73.0 ± 9.2, p < 0.001). Histological analysis confirmed new bone formation and vascularization. Conclusion DDM/rhBMP-2 grafting appears to significantly reduce the healing period, enabling early loading with stable and favorable clinical outcomes.

BACKGROUND: Embryo-endometrium cross-talk is one of the critical processes for implantation, and unsuccessful cross-talk leads to infertility. We established an endometrium-embryo (or embryoid bodies, hEBs) in vitro model in 2D and 3D conditions and assessed its potential through the fusion of embryos and the expression of specific markers. METHODS: C57BL/6 mouse embryos and human embryoid body (hEB) derived from embryonic stem cells were prepared as embryo models. Mouse endometrium (EM) and human endometrium cell line, HEC-1-A, were prepared, and 2D or 3D EMs were generated. The viability of the 3D endometrium was analyzed, and the optimal ratio of the gelation was revealed. The invasion of the embryos or hEBs was examined by immunostaining and 3D image rendering. RESULTS: The embryos and the alternative hEBs were effectively fused into 2D or 3D vitro EM models in both mouse and human models. The fused embryos and hEBs exhibited migration and further development. Notably, the established in vitro model expressed Oct4 and E-Cadherin, markers for early embryonic development; human CG Receptor and Progesterone Receptor, critical for implantation and pregnancy maintenance; and TSH Receptor, Epiregulin, and Prolactin, indicators of endometrial receptivity and embryo implantation. CONCLUSION This study marks a significant advancement in the field, as we have successfully established a novel in vitro model for studying embryo-endometrium cross-talk. This model, a crucial tool for understanding fertility and the causes of miscarriage due to failed implantation, provides a unique platform for investigating the complex processes of successful implantation and pregnancy, underscoring its potential impact on reproductive health.

Background and Objectives: Among various emerging catheter-based treatments for severe tricuspid regurgitation (TR), the spacer device can reduce the regurgitation orifice without manipulating the valve leaflet. However, its clinical application has been hampered by traumatic anchoring to the myocardium and the coaxial alignment of the balloon resulting in insufficient TR reduction. This study aimed to evaluate the early-stage safety, technical feasibility, and preliminary efficacy of the novel atraumatic vertical spacer in patients with isolated severe TR. Methods: All procedures were guided by fluoroscopy and transthoracic echocardiography.The maximum device placement time with an inflated balloon was 24 hours. Changes in the amount of TR, right ventricular function, and patient hemodynamics were measured during balloon deployment. Results: A total of 7 patients (median age 74), underwent successful device implantation without procedure-related complications. During balloon inflation (median 25 minutes), there were no symptoms or signs indicative of TR intolerance. TR was reduced by 1 grade or greater in all patients, with 2 patients exhibiting a reduction of 3 grades, from torrential TR to a moderate degree. Mild TR after balloon inflation was achieved in 3 patients with baseline severe TR. The TR reduction observed during initial balloon deployment was sustained during the subsequent balloon maintenance period. Conclusions The Pivot-balloon procedure was safe, technically feasible, and effective in reducing TR in patients with severe TR. No periprocedural complications or adverse cardiovascular events were reported during device placement with TR reduction observed in all patients. However, longer-term follow-up is needed to confirm safety and treatment effect.

Background: The associations between thyroid cancer and skeletal outcomes have not been thoroughly investigated. We aimed to investigate the risk of osteoporotic fractures in patients with thyroid cancer compared to that in a matched control group. Methods: This retrospective cohort study included 2,514 patients with thyroid cancer and 75,420 matched controls from the Korean National Health Insurance Service-National Sample Cohort (NHIS-NSC, 2006–2019). The rates of osteoporotic fractures were analyzed, and associations with the levothyroxine dose were evaluated. Results: Patients with thyroid cancer had a significantly lower risk of fracture than did the control group (hazard ratio [HR], 0.81; 95% confidence interval [CI], 0.69 to 0.94; P=0.006). Patients diagnosed with thyroid cancer after the age of 50 years (older cancer group) had a significantly lower risk of fracture than did those in the control group (HR, 0.72; 95% CI, 0.6 to 0.85; P<0.001), especially those diagnosed with spinal fractures (HR, 0.66; 95% CI, 0.51 to 0.85; P=0.001). Patients in the older cancer group started osteoporosis treatment earlier than did those in the control group (65.5±7.5 years vs. 67.3±7.6 years, P<0.001). Additionally, a lower dose of levothyroxine was associated with a reduced risk of fractures. Conclusion In the clinical setting, the risk of fracture in women diagnosed with thyroid cancer after the age of 50 years was lower than that in the control group, which was caused by more proactive osteoporosis treatment in postmenopausal women with thyroid cancer.

Background: Traditionally, dental implants require a healing period of 4 to 9 months for osseointegration, with longer recovery times considered when bone grafting is needed. This retrospective study evaluates the clinical efficacy of demineralized dentin matrix (DDM) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) during dental implant placement to expedite the osseointegration period for early loading. Methods: Thirty patients (17 male, 13 female; mean age 55.0 ± 8.8 years) requiring bone grafts due to implant fixture exposure (more than four threads; ≥ 3.2 mm) were included, with a total of 96 implants placed. Implants were inserted using a two-stage protocol with DDM/rhBMP-2 grafts. Early loading was initiated at two months postoperatively in the mandible and three months in the maxilla. Clinical outcomes evaluated included primary and secondary stability (implant stability quotient values), healing period, bone width, and marginal bone level assessed via cone-beam computed tomography. Results: All implants successfully supported final prosthetics with a torque of 50Ncm, without any osseointegration failures. The average healing period was 69.6 days in the mandible and 90.5 days in the maxilla, with significantly higher secondary stability in the mandible (80.7 ± 6.7) compared to the maxilla (73.0 ± 9.2, p < 0.001). Histological analysis confirmed new bone formation and vascularization. Conclusion DDM/rhBMP-2 grafting appears to significantly reduce the healing period, enabling early loading with stable and favorable clinical outcomes.

BACKGROUND: Embryo-endometrium cross-talk is one of the critical processes for implantation, and unsuccessful cross-talk leads to infertility. We established an endometrium-embryo (or embryoid bodies, hEBs) in vitro model in 2D and 3D conditions and assessed its potential through the fusion of embryos and the expression of specific markers. METHODS: C57BL/6 mouse embryos and human embryoid body (hEB) derived from embryonic stem cells were prepared as embryo models. Mouse endometrium (EM) and human endometrium cell line, HEC-1-A, were prepared, and 2D or 3D EMs were generated. The viability of the 3D endometrium was analyzed, and the optimal ratio of the gelation was revealed. The invasion of the embryos or hEBs was examined by immunostaining and 3D image rendering. RESULTS: The embryos and the alternative hEBs were effectively fused into 2D or 3D vitro EM models in both mouse and human models. The fused embryos and hEBs exhibited migration and further development. Notably, the established in vitro model expressed Oct4 and E-Cadherin, markers for early embryonic development; human CG Receptor and Progesterone Receptor, critical for implantation and pregnancy maintenance; and TSH Receptor, Epiregulin, and Prolactin, indicators of endometrial receptivity and embryo implantation. CONCLUSION This study marks a significant advancement in the field, as we have successfully established a novel in vitro model for studying embryo-endometrium cross-talk. This model, a crucial tool for understanding fertility and the causes of miscarriage due to failed implantation, provides a unique platform for investigating the complex processes of successful implantation and pregnancy, underscoring its potential impact on reproductive health.

Background: Traditionally, dental implants require a healing period of 4 to 9 months for osseointegration, with longer recovery times considered when bone grafting is needed. This retrospective study evaluates the clinical efficacy of demineralized dentin matrix (DDM) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) during dental implant placement to expedite the osseointegration period for early loading. Methods: Thirty patients (17 male, 13 female; mean age 55.0 ± 8.8 years) requiring bone grafts due to implant fixture exposure (more than four threads; ≥ 3.2 mm) were included, with a total of 96 implants placed. Implants were inserted using a two-stage protocol with DDM/rhBMP-2 grafts. Early loading was initiated at two months postoperatively in the mandible and three months in the maxilla. Clinical outcomes evaluated included primary and secondary stability (implant stability quotient values), healing period, bone width, and marginal bone level assessed via cone-beam computed tomography. Results: All implants successfully supported final prosthetics with a torque of 50Ncm, without any osseointegration failures. The average healing period was 69.6 days in the mandible and 90.5 days in the maxilla, with significantly higher secondary stability in the mandible (80.7 ± 6.7) compared to the maxilla (73.0 ± 9.2, p < 0.001). Histological analysis confirmed new bone formation and vascularization. Conclusion DDM/rhBMP-2 grafting appears to significantly reduce the healing period, enabling early loading with stable and favorable clinical outcomes.

BACKGROUND: Embryo-endometrium cross-talk is one of the critical processes for implantation, and unsuccessful cross-talk leads to infertility. We established an endometrium-embryo (or embryoid bodies, hEBs) in vitro model in 2D and 3D conditions and assessed its potential through the fusion of embryos and the expression of specific markers. METHODS: C57BL/6 mouse embryos and human embryoid body (hEB) derived from embryonic stem cells were prepared as embryo models. Mouse endometrium (EM) and human endometrium cell line, HEC-1-A, were prepared, and 2D or 3D EMs were generated. The viability of the 3D endometrium was analyzed, and the optimal ratio of the gelation was revealed. The invasion of the embryos or hEBs was examined by immunostaining and 3D image rendering. RESULTS: The embryos and the alternative hEBs were effectively fused into 2D or 3D vitro EM models in both mouse and human models. The fused embryos and hEBs exhibited migration and further development. Notably, the established in vitro model expressed Oct4 and E-Cadherin, markers for early embryonic development; human CG Receptor and Progesterone Receptor, critical for implantation and pregnancy maintenance; and TSH Receptor, Epiregulin, and Prolactin, indicators of endometrial receptivity and embryo implantation. CONCLUSION This study marks a significant advancement in the field, as we have successfully established a novel in vitro model for studying embryo-endometrium cross-talk. This model, a crucial tool for understanding fertility and the causes of miscarriage due to failed implantation, provides a unique platform for investigating the complex processes of successful implantation and pregnancy, underscoring its potential impact on reproductive health.