Linxian County in Henan Province, Northern China is known as the region with the highest incidence and mortality rate of esophageal cancer worldwide. Since 1959, the Henan medical team has conducted field work on esophageal cancer prevention and treatment in Linxian. Through three generations of effort exerted by oncologists over 65 years of research on esophageal cancer prevention and treatment in Linxian, the incidence rate of esophageal squamous cell carcinoma in this area has dropped by nearly 50%, and the 5-year survival rate has increased to 40%, reaching the international leading level. This article aims to summarize the history, present opportunities and new challenges, and explore the experience of esophageal cancer prevention and treatment in Linxian (referred to as the “Linxian experience”), providing reference and guidance to cancer prevention and treatment research in China.

Objective As primary Sj?gren's syndrome(pSS)primarily affects the salivary glands,saliva can serve as an indicator of the glands'pathophysiology and the disease's status.This study aims to illustrate the salivary proteomic profiles of pSS patients and identify potential candidate biomarkers for diagnosis. Methods The discovery set contained 49 samples(24 from pSS and 25 from age-and gender-matched healthy controls[HCs])and the validation set included 25 samples(12 from pSS and 13 from HCs).Totally 36 pSS patients and 38 HCs were centrally randomized into the discovery set or to the validation set at a 2:1 ratio.Unstimulated whole saliva samples from pSS patients and HCs were analyzed using a data-independent acquisition(DIA)strategy on a 2D LC-HRMS/MS platform to reveal differential proteins.The crucial proteins were verified using DIA analysis and annotated using gene ontology(GO)and International Pharmaceutical Abstracts(IPA)analysis.A prediction model for SS was established using random forests. Results A total of 1,963 proteins were discovered,and 136 proteins exhibited differential representation in pSS patients.The bioinformatic research indicated that these proteins were primarily linked to immunological functions,metabolism,and inflammation.A panel of 19 protein biomarkers was identified by ranking order based on P-value and random forest algorichm,and was validated as the predictive biomarkers exhibiting good performance with area under the curve(AUC)of 0.817 for discovery set and 0.882 for validation set. Conclusions The candidate protein panel discovered may aid in pSS diagnosis.Salivary proteomic analysis is a promising non-invasive method for prognostic evaluation and early and precise treatments for pSS patients.DIA offers the best time efficiency and data dependability and may be a suitable option for future research on the salivary proteome.

Objective:To investigate the value of implantable cardiac monitor (ICM) in the diagnosis and treatment of patients over 60 years old with unexplained syncope.Methods:This was a multi-center, prospective cohort study. Between June 2018 and April 2021, patients over the age of 60 with unexplained syncope at Beijing Hospital, Fuwai Hospital, Beijing Anzhen Hospital and Puren Hospital were enrolled. Patients were divided into 2 groups based on their decision to receive ICM implantation (implantation group and conventional follow-up group). The endpoint was the recurrence of syncope and cardiogenic syncope as determined by positive cardiac arrhythmia events recorded at the ICM or diagnosed during routine follow-up. Kaplan‐Meier survival analysis was used to compare the differences of cumulative diagnostic rate between the 2 groups. A multivariate Cox regression analysis was performed to determine independent predictors of diagnosis of cardiogenic syncope in patients with unexplained syncope.Results:A total of 198 patients with unexplained syncope, aged (72.9±8.25) years, were followed for 558.0 (296.0,877.0) d, including 98 males (49.5%). There were 100 (50.5%) patients in the implantation group and 98 (49.5%) in the conventional follow-up group. Compared with conventional follow-up group, patients in the implantation group were older, more likely to have comorbidities, had a higher proportion of first degree atrioventricular block indicated by baseline electrocardiogram, and had a lower body mass index (all P<0.05). During the follow-up period, positive cardiac arrhythmia events were recorded in 58 (58.0%) patients in the ICM group. The diagnosis rate (42.0% (42/100) vs. 4.1% (4/98), P<0.001) and the intervention rate (37.0% (37/100) vs. 2.0% (2/98), P<0.001) of cardiogenic syncope in the implantation group were higher than those in the conventional follow-up group (all P<0.001). Kaplan-Meier survival analysis showed that the cumulative diagnostic rate of cardiogenic syncope was significantly higher in the implantation group than in the traditional follow-up group ( HR=11.66, 95% CI 6.49-20.98, log-rank P<0.001). Multivariate analysis indicated that ICM implantation, previous atrial fibrillation, diabetes mellitus or first degree atrioventricular block in baseline electrocardiogram were independent predictors for cardiogenic syncope (all P<0.05). Conclusions:ICM implantation improves the diagnosis and intervention rates in patients with unexplained syncope, and increases diagnostic efficiency in patients with unexplained syncope.

The paper is to establish an UPLC-MS/MS method for the simultaneous determination of 19 components in Microctis Folium from different production areas. The 50% methanol was used as extraction solvent. The Agilent ZORBAX SB C18 (150 mm × 2.1 mm, 1.8 μm) column was used; mobile phase was acetonitrile - 0.1% acetic acid with gradient elution, flow rate was 0.3 mL·min^-1, colume temperature was 30 ℃, and the injection volume was 2 μL; electrospray ionizaton source was used and detected in negative ion mode. The results showed that the established UPLC-MS/MS method could well separate the 19 components, and the methodological investigation results of 19 components were good. By means of orthogonal partial least squares discriminant analysis (OPLS-DA), 28 batches of Microctis Folium samples from different production areas can be divided into three categories, Guangdong, Guangxi and Hainan are each classified into one category, and 10 signature compounds which affecting the quality differences of different production areas were screened out. The established method is accurate, reliable, sensitive and reproducible. It can provide a basis for the establishment of the quality standard of Microctis Folium, as well as for safety and quality research.

Lipopolysaccharides (LPS) are major outer membrane components of Gram-negative bacteria. Unlike most Gram-negative bacteria, Acinetobacter baumannii can still survive and acquire polymyxin resistance after complete loss of LPS. Previous studies of LPS-deficient Acinetobacter baumannii mostly focused on LPS-deficient strains induced by polymyxin, whose background was complex and unstable. To investigate LPS loss-mediated polymyxin resistant-Acinetobacter baumannii, this study constructed a stable and clear background LPS-deficient strain by knocking out lpxC gene in Acinetobacter baumannii ATCC 19606 with CIRSPR/Cas9, and then studied the phenotypic changes of the lpxC-deficient strain including morphology, growth rate, antibiotic susceptibility, virulence, membrane permeability, and membrane potential. Animal experiments were approved by the Animal Care and Welfare Committee Institute of Medicinal Biotechnology, CAMS and PUMC (approval number: IMB-20240119D₉). The results indicated that the lpxC gene of Acinetobacter baumannii ATCC 19606 was successfully knocked out. After losing the lpxC, the strain underwent the morphological change from rod-shaped to spherical. Furthermore, it leads to reduced growth rate, enhanced membrane permeability, decreased membrane potential, lower virulence, and increased antibiotic susceptibility to β-lactams, quinolones, aminoglycosides, macrolides, glycopeptides. The lpxC deletion results in significant changes in membrane homeostasis and adaptability of Acinetobacter baumannii. Understanding the phenotypic changes of colistin-resistant Acinetobacter baumannii mediated by LPS loss is useful for exploring the resistance mechanism of Acinetobacter baumannii and developing new therapeutic strategies.

Objective:To explore the clinical manifestations,pathological features,immunophenotype,as well as diagnosis,treatment and prognosis of patients with CD4-CD56+blastic plasmacytoid dendritic cell neoplasm(BPDCN),in order to further understand the rare disease.Methods:The clinical data,laboratory examinations and treatment regimens of two patients with CD4-CD56+BPDCN in the First Affiliated Hospital of Wannan Medical College were retrospectively analyzed.Results:The two patients were both elderly males with tumor involved in skin,bone marrow,lymph nodes,etc.Immunohistochemical results of skin lesions showed that both CD56 and CD123 were positive,while CD4,CD34,TdT,CD3,CD20,MPO and EBER were negative.Flow cytometry of bone marrow demonstrated that CD56,CD123,and CD304 were all positive,while specific immune markers of myeloid and lymphoid were negative.Two patients were initially very sensitive to acute lymphoblastic leukemia or lymphomatoid chemotherapy regimens,but prone to rapid relapse.The overall survival of both patients was 36 months and 4 months,respectively.Conclusion:CD4-CD56+BPDCN is very rare and easily misdiagnosed as other hematological tumors with poor prognosis.Acute lymphoblastic leukemia or lymphomatoid therapy should be used first to improve the poor prognosis.

Background: The lack of headforms that accurately reflect the head characteristics of Koreans and the demographic composition of the Korean population can lead to inadequate FFR testing and reduced effectiveness of FFRs.MethodDirect measurements of 5,110 individuals and 3D measurements of 2,044 individuals, aged between 9 and 69 years, were sampled from the data pool of Size Korea surveys based on the age and gender ratios of the Korean resident demographics. Seven head dimensions were selected based on the ISO 16976-2, availability of Size Korea measurements, and their relevance to the fit performance of FFRs. A principal component analysis (PCA) was performed using the direct measurements to extract the main factors explaining the head characteristics and then the main factors were standardized and remapped to 3D measurements, creating five size categories representing Korean head shapes. Lastly, representative 3D headforms were constructed by averaging five head shapes for each size category. Results: The study identified two main factors explaining Korean head characteristics by the PCA procedure specified in ISO 16976-2 and developed five representative headforms reflecting the anthropometric features of Korean heads: medium, small, large, short & wide, and long & narrow. Conclusion This study developed representative headforms tailored to the Korean population for conducting total inward leakage (TIL) tests on filtering facepiece respirators (FFRs). The representative headforms can be used for TIL testing by employing robotic headforms to enhance the performance of FFRs for the Korean target population.

Background: The position of the eyebrows is critical when planning blepharoptosis surgery. However, insufficient scholarly attention has been paid to the details of postoperative eyebrow height changes at each anatomical landmark. This study investigated the effect of blepharoptosis surgery on brow height and evaluated the change in brow position. Methods: After a retrospective review of 247 patients, this study analyzed 53 patients (106 eyelids) who underwent levator and Müller’s complex advancement between March 2010 and January 2022. Brow heights were measured from the distance between the upper brow margin of each landmark and horizontal line of pupillary center on a digital photograph. Results: The mean change of eyebrow lowering was 1.54 mm (P<0.001) at the medial canthus, 1.29 mm (P<0.001) at the medial limbus, 1.44 mm (P<0.001) at the center of the pupil, 1.40 mm (P<0.001) at the lateral limbus, 1.15 mm (P=0.001) at the lateral canthus, and 0.75 mm (P=0.021) at the lateral eyebrow end. The brow change was most prominent at medial canthus and least prominent at the lateral brow end. The preoperative brow position was only statistically significant factor predicting brow height descent after surgery according to multiple linear regression analysis (R2=0.305, B=–0.375, P<0.001). Conclusions The eyebrows lowered in most patients after blepharoptosis surgery. The preoperative brow position is the most important factor in predicting the change in brow height after blepharoptosis surgery.

Objective: To explore the effects of three-dimensional (3D) bioprinting gelatin methacrylamide (GelMA) hydrogel loaded with nano silver on full-thickness skin defect wounds in rats. Methods: The experimental research method was adopted. The morphology, particle diameter, and distribution of silver nanoparticles in nano silver solution with different mass concentrations and the pore structure of silver-containing GelMA hydrogel with different final mass fractions of GelMA were observed by scanning electron microscope and the pore size was calculated. On treatment day 1, 3, 7, and 14, the concentration of nano silver released from the hydrogel containing GelMA with final mass fraction of 15% and nano silver with final mass concentration of 10 mg/L was detected by mass spectrometer. At 24 h of culture, the diameters of inhibition zone of GelMA hydrogel containing final mass concentration of 0 (no nano silver), 25, 50, and 100 mg/L nano silver against Staphylococcus aureus and Escherichia coli were detected. Fibroblasts (Fbs) and adipose stem cells (ASCs) were isolated respectively by enzymatic digestion using the discarded prepuce after circumcision from a 5-year-old healthy boy who was treated in the Department of Urology of the Second Affiliated Hospital of Zhejiang University School of Medicine in July 2020, and the discarded fat tissue after liposuction from a 23-year-old healthy woman who was treated in the Department of Plastic Surgery of the Hospital in July 2020. The Fbs were divided into blank control group (culture medium only), 2 mg/L nano sliver group, 5 mg/L nano sliver group, 10 mg/L nano sliver group, 25 mg/L nano sliver group, and 50 mg/L nano sliver group, which were added with the corresponding final mass concentrations of nano sliver solution, respectively. At 48 h of culture, the Fb proliferation viability was detected by cell counting kit 8 method. The Fbs were divided into 0 mg/L silver-containing GelMA hydrogel group, 10 mg/L silver-containing GelMA hydrogel group, 50 mg/L silver-containing GelMA hydrogel group, and 100 mg/L silver-containing GelMA hydrogel group and then were correspondingly treated. On culture day 1, 3, and 7, the Fb proliferation viability was detected as before. The ASCs were mixed into GelMA hydrogel and divided into 3D bioprinting group and non-printing group. On culture day 1, 3, and 7, the ASC proliferation viability was detected as before and cell growth was observed by live/dead cell fluorescence staining. The sample numbers in the above experiments were all 3. Four full-thickness skin defect wounds were produced on the back of 18 male Sprague-Dawley rats aged 4 to 6 weeks. The wounds were divided into hydrogel alone group, hydrogel/nano sliver group, hydrogel scaffold/nano sliver group, and hydrogel scaffold/nano sliver/ASC group, and transplanted with the corresponding scaffolds, respectively. On post injury day (PID) 4, 7, 14, and 21, the wound healing was observed and the wound healing rate was calculated (n=6). On PID 7 and 14, histopathological changes of wounds were observed by hematoxylin eosin staining (n=6). On PID 21, collagen deposition of wounds was observed by Masson staining (n=3). Data were statistically analyzed with one-way analysis of variance, analysis of variance for repeated measurement, Bonferroni correction, and independent sample t test. Results: The sliver nano particles in nano silver solution with different mass concentrations were all round, in scattered distribution and uniform in size. The silver-containing GelMA hydrogels with different final mass fractions of GelMA all showed pore structures of different sizes and interconnections. The pore size of silver-containing GelMA hydrogel with 10% final mass fraction was significantly larger than that of silver-containing GelMA hydrogels with 15% and 20% final mass fractions (with P values both below 0.05). On treatment day 1, 3, and 7, the concentration of nano silver released from silver-containing GelMA hydrogel in vitro showed a relatively flat trend. On treatment day 14, the concentration of released nano silver in vitro increased rapidly. At 24 h of culture, the diameters of inhibition zone of GelMA hydrogel containing 0, 25, 50, and 100 mg/L nano silver against Staphylococcus aureus and Escherichia coli were 0, 0, 0.7, and 2.1 mm and 0, 1.4, 3.2, and 3.3 mm, respectively. At 48 h of culture, the proliferation activity of Fbs in 2 mg/L nano silver group and 5 mg/L nano silver group was both significantly higher than that in blank control group (P<0.05), and the proliferation activity of Fbs in 10 mg/L nano silver group, 25 mg/L nano silver group, and 50 mg/L nano silver group was all significantly lower than that in blank control group (P<0.05). Compared with the that of Fbs in 0 mg/L silver-containing GelMA hydrogel group, the proliferation activity of Fbs in 50 mg/L silver-containing GelMA hydrogel group and 100 mg/L silver-containing GelMA hydrogel group was all significantly decreased on culture day 1 (P<0.05); the proliferation activity of Fbs in 50 mg/L silver-containing GelMA hydrogel group was significantly increased (P<0.05), while the proliferation activity of Fbs in 100 mg/L silver-containing GelMA hydrogel group was significantly decreased on culture day 3 (P<0.05); the proliferation activity of Fbs in 100 mg/L silver-containing GelMA hydrogel group was significantly decreased on culture day 7 (P<0.05). The proliferation activity of ASCs in 3D bioprinting group show no statistically significant differences to that in non-printing group on culture day 1 (P>0.05). The proliferation activity of ASCs in 3D bioprinting group was significantly higher than that in non-printing group on culture day 3 and 7 (with t values of 21.50 and 12.95, respectively, P<0.05). On culture day 1, the number of dead ASCs in 3D bioprinting group was slightly more than that in non-printing group. On culture day 3 and 5, the majority of ASCs in 3D bioprinting group and non-printing group were living cells. On PID 4, the wounds of rats in hydrogel alone group and hydrogel/nano sliver group had more exudation, and the wounds of rats in hydrogel scaffold/nano sliver group and hydrogel scaffold/nano sliver/ASC group were dry without obvious signs of infection. On PID 7, there was still a small amount of exudation on the wounds of rats in hydrogel alone group and hydrogel/nano sliver group, while the wounds of rats in hydrogel scaffold/nano sliver group and hydrogel scaffold/nano sliver/ASC group were dry and scabbed. On PID 14, the hydrogels on the wound surface of rats in the four groups all fell off. On PID 21, a small area of wounds remained unhealed in hydrogel alone group. On PID 4 and 7, the wound healing rates of rats in hydrogel scaffold/nano sliver/ASC group were significantly higher than those of the other three groups (P<0.05). On PID 14, the wound healing rate of rats in hydrogel scaffold/nano sliver/ASC group was significantly higher than the wound healing rates in hydrogel alone group and hydrogel/nano sliver group (all P<0.05). On PID 21, the wound healing rate of rats in hydrogel alone group was significantly lower than that in hydrogel scaffold/nano sliver/ASC group (P<0.05). On PID 7, the hydrogels on the wound surface of rats in the four groups remained in place; on PID 14, the hydrogel in hydrogel alone group was separated from the wounds of rats, while some hydrogels still existed in the new tissue of the wounds of rats in the other three groups. On PID 21, the collagen arrangement in the wounds of rats in hydrogel alone group was out of order, while the collagen arrangement in the wounds of rats in hydrogel/nano sliver group, and hydrogel scaffold/nano sliver/ASC group was relatively orderly. Conclusions: Silver-containing GelMA hydrogel has good biocompatibility and antibacterial properties. Its three-dimensional bioprinted double-layer structure can better integrate with new formed tissue in the full-thickness skin defect wounds in rats and promote wound healing.
Male ; Rats ; Animals ; Humans ; Hydrogels/pharmacology* ; Bioprinting ; Metal Nanoparticles ; Rats, Sprague-Dawley ; Silver/pharmacology* ; Soft Tissue Injuries ; Anti-Bacterial Agents

Abstract: Objective　To investigate the clustered regularly interspaced short palindromic repeats (CRISPR) genotypes and regional distribution of Yersinia pestis strains in the natural plague foci of Hainan Tibetan Autonomous Prefecture of Qinghai Province (referred to as "Hainan prefecture") and provide a scientific basis for plague prevention and control in this area. Methods　A total of 36 representative Yersinia pestis strains, which were isolated from different host animals and insect vectors from 1954 to 2009 in Hainan Prefecture, were selected as experimental subjects. The DNAs were extracted using the traditional sodium dodecyl sulfate decomposition and phenol-chloroform method. Three pairs of CRISPR primers (YPa, Ypb, YPc) were used for PCR amplification, sequencing and analysis of the DNA of the tested strains, respectively, as a means to identify the CRISPR genotypes of Yersinia pestis in Hainan Prefecture. Results　A total of 17 spacers were observed among 36 strains of Yersinia pestis, including 9 of YPa, 5 of YPb and 3 of YPc. All strains were divided into 5 CRISPR gene clusters (Cb2, Cb4 ', Ca7, Ca7 ', Ca35 ') and 6 genotypes (G1, G9, G22, G22-A1 ', G26-A1 ', G26-A1 'A4 -). The G26-a1 ' was the main genotype, which was distributed in Gonghe, Guide and Xinghai County, and the G22 is the second type, which was distributed in Gonghe and Guide County. Conclusions　The genetic polymorphism of CRISPR loci of Yersinia pestis strains in Hainan was high, and the regional distribution characteristics of Yersinia pestis strains with different genotypes were significant.