This study aimed to evaluate the effect of different remineralization agents on the shear bond strength (SBS) on enamel and to confirm remineralization capacity through quantitative light-induced fluorescence (QLF). Sixty non-carious human third molars were divided into eight groups based on remineralization agents agents (control, Tooth Mousse plusTM, Apapro, BGS-7 bioglass) and application time (24 h, 2 weeks). Enamel surfaces were prepared and treated with agents, followed by demineralization and remineralization. Quantitative Light-induced Fluorescence (QLF) assessed fluorescence loss and recovery. After adhesive application and composite restoration, shear bond strength (SBS) was measured. Statistical analysis included Shapiro-Wilk, ANOVA, Kruskal-Wallis, paired t-tests, Wilcoxon rank tests, and multiple comparison tests. SBS values did not show a significant difference between the groups according to the type and application time of the remineralization agents. QLF measurement, in the 24 h groups, showed no significant difference in the recovery amount between the groups. In the 2 week groups, a statistically significant difference was observed and the value was significantly higher in the BG group than that in the control group. There were no significant differences in the values based on the application time. Within the limitations of this study, bioactive glass showed higher remineralization ability than all the other experimental agents. The SBS was not affected by the remineralizing agent.

This study aimed to report the results of a successful periradicular microsurgery on a mandibular first premolar with a radicular groove. A 38-year-old female reported a sinus tract on her buccal gingiva which was radiographically traced to the middle third of the mesial side of the root of her mandibular right first premolar (#44). A radicular groove and an accessory canal in the middle of the radicular groove were found using cone-beam computed tomography. After endodontic treatment, the sinus tract did not disappear;thus, periradicular microsurgery was performed. The radicular groove and the accessory canal were prepared and filled with fastsetting MTA without resectioning the root apex. After 3 weeks, the sinus tract disappeared, and complete healing was revealed on the periapical radiograph at a 5-month follow-up. Therefore, periradicular microsurgery is recommended in mandibular first premolars with radicular grooves on the accessible mesial side of the root.

Objectives: This study investigated the effect of an aluminum chloride hemostatic agent on the shear bond strength (SBS) of a universal adhesive to dentin. Materials and Methods: Eighty extracted human molars were trimmed at the occlusal dentin surfaces and divided mesiodistally. According to hemostatic agent application, specimens were randomly allocated into control (C) and hemostatic agent (Traxodent; H) groups. Each group was divided into 4 subgroups according to the adhesive system (n = 20): Scotchbond Multi-Purpose (SBER), Clearfil SE Bond (CLSE), All-Bond Universal etch-and-rinse mode (ALER), and All-Bond Universal self-etch mode (ALSE). SBS was measured for half of the specimens at 24 hours, and the other half were thermocycled in water baths (group T).Fracture surfaces were examined to determine the failure mode. The SBS was measured, and data were analyzed using 1-way analysis of variance, the Student’s t-test, and the Tukey honestly significant difference test (p = 0.05). Results: No significant differences in SBS were found between groups C and H for any adhesive system at 24 hours. After thermocycling, a statistically significant difference was observed between CT+ALSE and HT+ALSE (p < 0.05). When All-Bond Universal was applied to hemostatic agent-contaminated dentin, the SBS of H+ALSE was significantly lower than that of H+ALER (p< 0.05). The SBER subgroups showed no significant differences in SBS regardless of treatment and thermocycling. Conclusions When exposed dentin was contaminated by an aluminum chloride hemostatic agent before dentin adhesive treatment, application of All-Bond Universal in etch-and-rinse mode was superior to self-etch mode.

When luting indirect restorations with dual-cure resin cement (DCRC), excess cement can be easily removed by performing tack cure of DCRC for a few seconds. The purpose of this study was to evaluate whether different tack cure times affect polymerization shrinkage (PS) of the selected DCRC. One dual-cure resin cement (G-CEM LinkAce, GC) was used for measuring PS in light-cure (LC group), self-cure (SC group), and two tack-cure modes. In the first tack-cure subgroup, tack cure was performed for 1, 2, 3, and 5 seconds, followed by light cure after 2 minutes of remnant removal time in each case (TC-LC groups). In the other tack-cure subgroup, tack cure was performed for the same lengths of time, but followed by self-cure in each case (TC-SC groups). PS was measured by a modified bonded disc method for 1,800 seconds. One-way analysis of variance followed by Duncan’s post hoc test was used to determine any statistically significant differences among the test groups (α = 0.05). When the DCRC was selfcured after tack cure, PS was significantly lower than when it was only self-cured (p < 0.05); however, tack cure time did not affect PS (p > 0.05). When the DCRC was light-cured, PS was not affected by tack cure or tack cure time (p > 0.05). Therefore, tack cure within 5 seconds did not negatively affect the final PS when the DCRC was light-cured after cement remnant removal.

The aim of this study was to evaluate the color stability of 4-methacryloxyethyl trimellitate anhydride (4-META) / methyl methacrylate (MMA) & tri-n-butylborane (TBB) resin with different powder-liquid (P/L) ratios and powder colors after immersion in coffee. Experimental groups (Bondfill SB) were classified by the P/L ratio (0.8:1 / 1:1 / 1.2:1, weight [wt] %) and color of the powder (light / medium). Light-cured resin composite (Filtek Z350 XT flowable) was used as a control group. Each disk-shaped specimen of 7 groups (n = 8 for color difference, n = 10 for translucency parameter [TP]) was immersed in a staining solution of coffee for 4 weeks. The color of the specimen was measured at the time of baseline, 1 day, 1 week, 2 weeks, 3 weeks, and 4 weeks with a spectrophotometer. The color difference (ΔE) and changes in translucency parameter (ΔTP) were statistically analyzed by one-way analysis of variance (ANOVA), followed by Tukey's post-hoc test. Independent t-test was applied to evaluate the effect on the colors of the powder (α = 0.05). The values of color difference (ΔE) of the experimental groups were within the clinically acceptable threshold (ΔE < 3.3), whereas control group showed values over 3.3 after 1 week of immersion. The values of TP ranged from 9.58 to 13.28. The differences of TP (ΔTP) between baseline and 4 weeks were less than 1.0, except in the control group. Conclusively, self-cured resin composite showed excellent color stability in coffee for the period of this study regardless of different P/L ratios and powder colors.
Coffee ; Immersion

Palatogingival groove (PGG) is an anomaly in the maxillary anterior teeth, often accompanied by the area of bony destruction adjacent to the teeth with no carious or traumatic history. The hidden trap in the tooth can harbor plaque and bacteria, resulting in periodontal destruction with or without pulpal pathologic change. Related diseases can involve periodontal destruction, combined endodontic-periodontal lesions, or separate endodontic and periodontal lesions. Disease severity and prognosis related to PGG depend on several factors, including location, range, depth, and type of the groove. Several materials have been used and recommended for cases of extensive periodontal destruction from PGG to remove and block the inflammatory source and recover the health of surrounding periodontal tissues. Even in cases of severe periodontal destruction, several studies have reported favorable treatment outcomes with proper management. With new options in diagnosis and treatment, clinicians need a detailed understanding of the characteristics, treatment, and prognosis of PGG to successfully manage the condition.
Bacteria ; Diagnosis ; Prognosis ; Prostaglandins G ; Tooth*

Paraformaldehyde has been used in the past as a pulpotomy agent. However, it has a severe cytotoxic effect and may cause alveolar bone necrosis. Depulpin, a devitalizing agent containing 49% paraformaldehyde, is no longer used frequently due to its severe side effects. In the two cases described in the present study, Depulpin was used as a devitalizing agent during root canal treatment. It caused a gradual loss of sensibility in adjacent teeth, gingival necrosis, and osteomyelitis. This case report demonstrates the serious side effects of using a paraformaldehyde-containing paste as a devitalizing agent for pulp, particularly mandibular bone necrosis.
Dental Pulp Cavity ; Necrosis* ; Osteomyelitis ; Pulpotomy ; Tooth

OBJECTIVES: The purpose of the present study was to evaluate the effects of proanthocyanidin (PAC), a crosslinking agent, on the physical properties of a collagen hydrogel and the behavior of human periodontal ligament cells (hPDLCs) cultured in the scaffold. MATERIALS AND METHODS: Viability of hPDLCs treated with PAC was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The physical properties of PAC treated collagen hydrogel scaffold were evaluated by the measurement of setting time, surface roughness, and differential scanning calorimetry (DSC). The behavior of the hPDLCs in the collagen scaffold was evaluated by cell morphology observation and cell numbers counting. RESULTS: The setting time of the collagen scaffold was shortened in the presence of PAC (p < 0.05). The surface roughness of the PAC-treated collagen was higher compared to the untreated control group (p < 0.05). The thermogram of the crosslinked collagen exhibited a higher endothermic peak compared to the uncrosslinked one. Cells in the PAC-treated collagen were observed to attach in closer proximity to one another with more cytoplasmic extensions compared to cells in the untreated control group. The number of cells cultured in the PAC-treated collagen scaffolds was significantly increased compared to the untreated control (p < 0.05). CONCLUSIONS: Our results showed that PAC enhanced the physical properties of the collagen scaffold. Furthermore, the proliferation of hPDLCs cultured in the collagen scaffold crosslinked with PAC was facilitated. Conclusively, the application of PAC to the collagen scaffold may be beneficial for engineering-based periodontal ligament regeneration in delayed replantation.
Calorimetry, Differential Scanning ; Cell Count ; Collagen* ; Cytoplasm ; Humans ; Hydrogel* ; Periodontal Ligament ; Regeneration ; Replantation

OBJECTIVES: A variety of root canal sealers were recently launched to the market. This study evaluated physicochemical properties, biocompatibility, and sealing ability of a newly launched resin-based sealer (Dia-Proseal, Diadent) compared to the existing root canal sealers (AHplus, Dentsply DeTrey and ADseal, Metabiomed). MATERIALS AND METHODS: The physicochemical properties of the tested sealers including pH, solubility, dimensional change, and radiopacity were evaluated. Biocompatibility was measured using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. For microleakage test, single-rooted teeth were instrumented, and obturated with gutta-percha and one of the sealers (n = 10). After immersion in 1% methylene blue solution for 2 weeks, the specimens were split longitudinally. Then, the maximum length of staining was measured. Statistical analysis was performed by one-way analysis of variance followed by Tukey test (p = 0.05). RESULTS: Dia-Proseal showed the highest pH value among the tested sealers (p < 0.05). ADseal showed higher dimensional change compared to AHplus and Dia-Proseal (p < 0.05). The solubility values of AHplus and Dia-Proseal were similar, whereas ADseal had the lowest solubility value (p < 0.05). The flow values of sealer in increasing order were AHplus, DiaProseal, and ADseal (p < 0.05). The radiopacity of AHplus was higher than those of ADseal and Dia-Proseal (p < 0.05). The cell viability of the tested materials was statistically similar throughout the experimental period. There were no significant differences in microleakage values among the tested samples. CONCLUSIONS: The present study indicates that Dia-Proseal has acceptable physicochemical properties, biocompatibility, and sealing ability.
Cell Survival ; Dental Pulp Cavity ; Gutta-Percha ; Hydrogen-Ion Concentration ; Immersion ; In Vitro Techniques* ; Methylene Blue ; Solubility ; Tooth

OBJECTIVES: The purpose of this study was to investigate the effectiveness of multiple decontamination procedures for salivary contamination after curing of a universal adhesive on dentin bond strength according to its etch modes. MATERIALS AND METHODS: Forty-two extracted bovine incisors were trimmed by exposing the labial dentin surfaces and embedded in cylindrical molds. A universal adhesive (All-Bond Universal, Bisco) was used. The teeth were randomly divided into groups according to etch mode and decontamination procedure. The adhesive was applied according to the manufacturer's instructions for a given etch mode. With the exception of the control groups, the cured adhesive was contaminated with saliva for 20 sec. In the self-etch group, the teeth were divided into three groups: control, decontamination with rinsing and drying, and decontamination with rinsing, drying, and adhesive. In the etch-and-rinse group, the teeth were divided into four groups: control, decontamination with rinsing and drying, decontamination with rinsing, drying, and adhesive, and decontamination with rinsing, drying, re-etching, and reapplication of adhesive. A composite resin (Filtek Z350XT, 3M ESPE) was used for filling and was cured on the treated surfaces. Shear bond strength was measured, and failure modes were evaluated. The data were subjected to one-way analysis of variation and Tukey's HSD test. RESULTS: The etch-and-rinse subgroup that was decontaminated by rinse, drying, re-etching, and reapplication of adhesive showed a significantly higher bond strength. CONCLUSIONS: When salivary contamination occurs after curing of the universal adhesive, additional etching improves the bond strength to dentin.
Adhesives* ; Decontamination* ; Dentin* ; Fungi ; Incisor ; Saliva* ; Tooth