Objective:To investigate the prognosis and safety of ripretinib in the treatment of patients with advanced gastrointestinal mesenchymal stromal tumors (GISTs) and to analyze the relationship between blood concentrations of this drug and prognosis.Methods:In this retrospective study, we investigated the effects of ripretinib in patients with advanced GISTs. The inclusion criteria comprised: (1) daily oral administration of ripretinib scheduled; and (2) uninterrupted treatment for at least 1month, with a stable and relatively fixed daily dosage maintained for a minimum of 2 weeks. Exclusion criteria comprised concurrent use of other tyrosine kinase inhibitors and presence of significant organ dysfunction. We retrospectively identified 79 patients with advanced GISTs who had received ripretinib across seven medical centers, namely Jiangsu Provincial Hospital, Jiangsu Cancer Hospital, Nanjing Drum Tower Hospital Affiliated to Nanjing University, Sir Run Run Shaw Hospital of Zhejiang University, Renji Hospital Affiliated to Shanghai Jiao Tong University School of Medicine, and the General Hospital of the People's Liberation Army, from 1 June 2021 to 31 March 2024. The cohort included 48 men and 31 women, 19 of whom had received ripretinib as second-line, 13 as third-line, and 47 as fourth-line therapy. Two peripheral venous blood samples were obtained from each participant and high-performance liquid chromatography-tandem mass spectrometry used to determine peak (Cmax) and trough (Cmin) concentrations of ripretinib. Machine learning methodologies, specifically the K-nearest neighbor algorithm combined with the Gridsearch CV strategy, were employed to establish the threshold for Cmin. We analyzed adverse reactions, treatment efficacy, median progression-free survival (mPFS), and the relationship between drug blood concentration and selected clinical parameters.Results:In the entire cohort, the Cmin and Cmax of ripretinib were 467 ± 360 μg/L and 986 ± 493 μg/L, respectively. Notably, female patients and individuals in the high-dose group exhibited significantly higher values for both Cmin and Cmax (both P<0.05). However, variations in drug concentrations associated with the line of ripretinib therapy, treatment efficacy, disease progression, and presence of selected specific genetic mutations were not significantly associated with values of Cmin and Cmax ( P>0.05). Among the 79 patients with advanced GISTs receiving ripretinib, reported adverse reactions included alopecia (53, 67.09%), hand–foot syndrome (24, 30.38%), fatigue (22, 27.85%), and myalgia (21, 26.58%). Two patients (2.53%) had grade III complications, both classified as hand–foot syndrome. The correlation between Cmax and adverse reactions was not statistically significant ( P > 0.05). By the time of the latest follow-up, five deaths (6.3%) had occurred within the cohort. The mPFS for the group was 16.3 months, with a mPFS of 14.4 months for those receiving standard dosage and 7.0 months for those receiving escalating dosage. Among the 65 patients treated with standard doses of ripretinib, those with Cmin exceeding a threshold of 450 μg/L exhibited a significantly longer mPFS (18.0 months vs.13.7 months; P < 0.05). Conclusion:In China, patients with advanced GISTs exhibit a notable tolerance to ripretinib, with no evidence for a correlation between adverse reactions and Cmax for the drug. Additionally, a Cmin exceeding 450 μg/L may be associated with an extended mPFS.

Objective:To compare the mechanical properties between our self-designed axially controlled compression spinal rod (ACCSR) and conventional spinal rod (CSR) for lumbar spondylolysis (LS).Methods:This study selected 36 ACCSRs (the ACCSR group) and 36 CSRs (the CSR group), both of which were in a diameter of 6.0 mm and manufactured in the same batch. They were subjected respectively to biomechanical tests of spinal rod and pedicle screw-rod internal fixation system. In spinal rod tests: the stiffness and yield load of the spinal rods were calculated using four-point bending tests ( n=7) and comparisons were made between the 2 groups; spinal rod fatigue tests ( n=8) recorded the successful compression loads after 2.5 million cycles of loading and compared them with the maximum force at the isthmus of a normal adult's unilateral lumbar spine (198.72 N). In tests of the pedicle screw-rod internal fixation system, the axial compression tests ( n=7) measured the axial gripping capacity, the axial torsion tests ( n=7) the torsional gripping capacity, and the lateral compression tests ( n=7) the stiffness and yield load of pedicle screws in the 2 groups respectively. Results:The stiffness [(1,543.37±61.41) N/mm] and yield load [1,338.57 (1,282.00, 1,353.80) N] of ACCSR group were significantly smaller than those of CSR group [(3,797.63±156.15) N/mm and 4,059.95 (3,813.80, 4,090.89) N] ( P<0.05). The spinal rod fatigue tests showed that the respective loads of CSR and ACCSR passing the 2.5 million fatigue tests were 640.00 N and 320.00 N, both larger than the maximum force at the unilateral lumbar isthmus of a normal adult (198.72 N). There were no significant differences between the ACCSR group and the CSR group in the axial gripping capacity and torsional gripping capacity, as well as in stiffness and yield load of screws between the 2 groups ( P>0.05). Conclusions:In fixation of LS, although the yield load, stiffness and fatigue resistance of ACCSR are inferior to those of CSR, the biomechanical properties of the two sets of pedicle screw-rod internal fixation system are comparable. The fatigue resistance of ACCSR can meet the stress requirements of the normal human isthmus.

Tissue engineering bone technology, grounded in seed cells, cytokines, and scaffold supports, provides an effective solution for addressing extensive bone defects, demonstrating significant potentials in the field of bone repair. However, this technology still faces numerous challenges. Focusing on vascularization in engineered bones, this article reviews various methods to enhance vascularization within tissue-engineered bones, including multicellular co-culture, application of angiogenic factors, advanced 3D printing, and aid of surgical interventions. This article also analyses the latest research developments and the limitations of the methods, and speculates future research directions for tissue engineered bone.

Objective:To investigate the prognosis and safety of ripretinib in the treatment of patients with advanced gastrointestinal mesenchymal stromal tumors (GISTs) and to analyze the relationship between blood concentrations of this drug and prognosis.Methods:In this retrospective study, we investigated the effects of ripretinib in patients with advanced GISTs. The inclusion criteria comprised: (1) daily oral administration of ripretinib scheduled; and (2) uninterrupted treatment for at least 1month, with a stable and relatively fixed daily dosage maintained for a minimum of 2 weeks. Exclusion criteria comprised concurrent use of other tyrosine kinase inhibitors and presence of significant organ dysfunction. We retrospectively identified 79 patients with advanced GISTs who had received ripretinib across seven medical centers, namely Jiangsu Provincial Hospital, Jiangsu Cancer Hospital, Nanjing Drum Tower Hospital Affiliated to Nanjing University, Sir Run Run Shaw Hospital of Zhejiang University, Renji Hospital Affiliated to Shanghai Jiao Tong University School of Medicine, and the General Hospital of the People's Liberation Army, from 1 June 2021 to 31 March 2024. The cohort included 48 men and 31 women, 19 of whom had received ripretinib as second-line, 13 as third-line, and 47 as fourth-line therapy. Two peripheral venous blood samples were obtained from each participant and high-performance liquid chromatography-tandem mass spectrometry used to determine peak (Cmax) and trough (Cmin) concentrations of ripretinib. Machine learning methodologies, specifically the K-nearest neighbor algorithm combined with the Gridsearch CV strategy, were employed to establish the threshold for Cmin. We analyzed adverse reactions, treatment efficacy, median progression-free survival (mPFS), and the relationship between drug blood concentration and selected clinical parameters.Results:In the entire cohort, the Cmin and Cmax of ripretinib were 467 ± 360 μg/L and 986 ± 493 μg/L, respectively. Notably, female patients and individuals in the high-dose group exhibited significantly higher values for both Cmin and Cmax (both P<0.05). However, variations in drug concentrations associated with the line of ripretinib therapy, treatment efficacy, disease progression, and presence of selected specific genetic mutations were not significantly associated with values of Cmin and Cmax ( P>0.05). Among the 79 patients with advanced GISTs receiving ripretinib, reported adverse reactions included alopecia (53, 67.09%), hand–foot syndrome (24, 30.38%), fatigue (22, 27.85%), and myalgia (21, 26.58%). Two patients (2.53%) had grade III complications, both classified as hand–foot syndrome. The correlation between Cmax and adverse reactions was not statistically significant ( P > 0.05). By the time of the latest follow-up, five deaths (6.3%) had occurred within the cohort. The mPFS for the group was 16.3 months, with a mPFS of 14.4 months for those receiving standard dosage and 7.0 months for those receiving escalating dosage. Among the 65 patients treated with standard doses of ripretinib, those with Cmin exceeding a threshold of 450 μg/L exhibited a significantly longer mPFS (18.0 months vs.13.7 months; P < 0.05). Conclusion:In China, patients with advanced GISTs exhibit a notable tolerance to ripretinib, with no evidence for a correlation between adverse reactions and Cmax for the drug. Additionally, a Cmin exceeding 450 μg/L may be associated with an extended mPFS.

Bone defects caused by different causes such as trauma, severe bone infection and other factors are common in clinic and difficult to treat. Usually, bone substitutes are required for repair. Current bone grafting materials used clinically include autologous bones, allogeneic bones, xenografts, and synthetic materials, etc. Other than autologous bones, the major hurdles of rest bone grafts have various degrees of poor biological activity and lack of active ingredients to provide osteogenic impetus. Bone marrow contains various components such as stem cells and bioactive factors, which are contributive to osteogenesis. In response, the technique of bone marrow enrichment, based on the efficient utilization of components within bone marrow, has been risen, aiming to extract osteogenic cells and factors from bone marrow of patients and incorporate them into 3D scaffolds for fabricating bone grafts with high osteoinductivity. However, the scientific guidance and application specification are lacked with regard to the clinical scope, approach, safety and effectiveness. In this context, under the organization of Chinese Orthopedic Association, the Expert consensus for the clinical application of autologous bone marrow enrichment technique for bone repair ( version 2023) is formulated based on the evidence-based medicine. The consensus covers the topics of the characteristics, range of application, safety and application notes of the technique of autologous bone marrow enrichment and proposes corresponding recommendations, hoping to provide better guidance for clinical practice of the technique.

Infectious bone defect is bone defect with infection or as a result of treatment of bone infection. It requires surgical intervention, and the treatment processes are complex and long, which include bone infection control,bone defect repair and even complex soft tissue reconstructions in some cases. Failure to achieve the goals in any step may lead to the failure of the overall treatment. Therefore, infectious bone defect has been a worldwide challenge in the field of orthopedics. Conventionally, sequestrectomy, bone grafting, bone transport, and systemic/local antibiotic treatment are standard therapies. Radical debridement remains one of the cornerstones for the management of bone infection. However, the scale of debridement and the timing and method of bone defect reconstruction remain controversial. With the clinical application of induced membrane technique, effective infection control and rapid bone reconstruction have been achieved in the management of infectious bone defect. The induced membrane technique has attracted more interests and attention, but the lack of understanding the basic principles of infection control and technical details may hamper the clinical outcomes of induced membrane technique and complications can possibly occur. Therefore, the Chinese Orthopedic Association organized domestic orthopedic experts to formulate An evidence-based clinical guideline for the treatment of infectious bone defect with induced membrane technique ( version 2023) according to the evidence-based method and put forward recommendations on infectious bone defect from the aspects of precise diagnosis, preoperative evaluation, operation procedure, postoperative management and rehabilitation, so as to provide useful references for the treatment of infectious bone defect with induced membrane technique.

Objective:To investigate the therapeutic effect of percutaneous transhepatic one-step biliary fistulation (PTOBF) combined with rigid choledochoscopy in the treatment of benign hepatic bile duct strictures.Methods:The clinical data of 46 patients with hepatic ductal stenosis and stones undergoing PTOBF combined with rigid choledochoscopy at the First Hospital of Guangzhou Medical University between September 2016 and September 2022 were retrospectively analyzed, including 20 males and 26 females, aged (48.5±17.6) years. The location of stones and strictures, stone retrieval rate, postoperative complications, stricture release rate, stone recurrence rate, and reoperation rate were analyzed to access the safety and effectiveness of this procedure.Results:A total of 58 sites of stenoses were found in 46 patients, and PTOBF lithotripsy combined with rigid choledochoscopy were performed for 77 times. The early postoperative complication rate was 19.6% (9/46), and the stenosis release rate was 93.5% (43/46). The mean follow-up time was (28.1±19.6) months, the complete stone retrieval rate was 91.3% (42/46), the stone recurrence rate was 19.6% (9/46), the reoperation rate was 8.7% (4/46), and the long-term postoperative complication rate was 6.5% (3/46).Conclusion:PTOBF combined with rigid choledochoscopic stenoplasty for benign hepatic duct strictures is a safe and feasible procedure to reduce the stone recurrence and long-term postoperative complications.

Coronary heart disease （CHD） with atherosclerosis is a common chronic disease worldwide， and anxiety and depression are potential and crucial risk factors for adverse prognosis in CHD. Chaihu Longgu Mulitang （CLMT）， first mentioned in the Shang Han Lun （《伤寒论》）， is a classic prescription for treating Shaoyang diseases combined with disturbance of the mind and spirit， with the effects of harmonizing Shaoyang and calming the mind. Current research on mechanisms has shown that CLMT can play a role in CHD complicated with anxiety and depression through multiple pathways， including regulating related signaling pathways， inhibiting the expression of inflammatory factors， improving oxidative stress damage， modulating neurotransmitter levels， suppressing the hypothalamic-pituitary-adrenal axis， promoting mobilization of mesenchymal stem cells from the bone marrow， and inhibiting platelet activation. Clinical studies have demonstrated that CLMT significantly improves symptoms such as angina and insomnia caused by CHD complicated with anxiety and depression， effectively reduces negative emotions， improves traditional Chinese medicine （TCM） syndrome scores， and decreases levels of inflammatory factors. Furthermore， it has fewer adverse reactions and higher safety than conventional western medicine treatments. This article provides a review of the mechanisms and clinical studies of CLMT in the treatment of CHD complicated with anxiety and depression based on a comprehensive analysis of literature from the China National Knowledge Infrastructure （CNKI）， Wanfang Data， VIP， PubMed， and other databases in the past 15 years， in order to provide references for further research on the use of CLMT in the management of CHD complicated with anxiety and depression.

Objective:To investigate the effect of flap combined with 3D printed microporous titanium(tantalum)prosthesis in the treatment of lower extremity soft tissue defect with large bone defect.Methods:From January 2019 to December 2020, 2 patients with large soft tissue defects on dorsal foot together with large metatarsal bone defect and 4 patients with soft tissue defects of calf with large tibial bone defect were treated. The areas of soft tissue defect were 5.0 cm×8.0 cm-15.0 cm×10.0 cm. The length of the bone defect were 3.8 cm to 7.0 cm, 5.75 cm in average. In the first stage, metatarsal bone defect or tibial bone defect was filled with vancomycin blended bone cement, meanwhile, soft tissue defect was repaired with anterolateral femoral flap(ALTF) with vascular anastomosis in 2 cases of feet, and local fascia flap was trans-positioned in 4 cases of lower extremity defects. The sizes of repairing flap were 6.0 cm×8.5 cm-16.0 cm×11.0 cm. Two to 7 months after the initial surgery, the customer designed microporous titanium prostheses were used(5 cases with microporous titanium and 1 with microporous tantalum) to repair the bone defects. The wound healing, the integration of metatarsal and tibial fractures with 3D printed microporous titanium(tantalum) prostheses, and the walking condition were observed after surgery. The follow-up lasted from 6 to 25 months, with an average of 12.7 months.Results:The wound healing in 5 patients was good. The patients stood on the foot in 2 months after surgery, started to walk with the assistance of crutch in 3 months after surgery, and took walk without assistance in 5-6 months after surgery. Good osseous integration were achieved. One diabetic patient had infection of foot wound 3 months after surgery. After removal of microporous titanium prosthesis and replacement of vancomycin blended interstitial substance of bone cement, the wound healed and the patient resumed walking.Conclusion:It is an effective method to encourage the patients to take early ambulation after the surgery for lower extremity soft tissue defect with large bone defect that was repaired by a flap and 3D printed microporous titanium(tantalum)prosthesis. Further observations are required to investigate the long-term efficacy, and the reduction of prosthesis infection rate requires further exploration.

Objective:To investigate the efficacy of elastic locking intramedullary nail (ELIN) in the treatment of mid clavicle fractures.Methods:From January 2014 to December 2020, the data of 61 patients with mid-clavicle fracture treated with ELIN were retrospectively analyzed. Among them, 38 patients were from the Fourth Central Hospital Affiliated to Nankai University and 23 were from the Second People's Hospital of Hulunbuir City. There were 36 males and 25 females, aged from 19 to 85 years (average, 54.5 years), 39 cases on the left side and 22 cases on the right side. According to Robinson's classification, there were 20 cases of type 2A2, 29 cases of type 2B1 and 12 cases of type 2B2. There was no nerve or vascular injury before operation. The postoperative evaluation measures included incision length, operation time, blood loss, fracture reduction, fracture healing time, ELIN removal time, shoulder Constant-Murley score, disabilities of the arm, shoulder, and hand (DASH) score, and related complications.Results:All patients were followed up for 13-51 weeks (average, 21.8 weeks). There were 34 cases of closed reduction and 27 cases of mini-open reduction, and the length of incision was 2.04±1.08 cm. The closed reduction operation time was 20.32±7.11 min, and the mini-open reduction operation time was 20.30±5.37 min. The intraoperative blood loss was 6.47±2.31 ml in the closed reduction group and 27.41±11.55 ml in the mini-open reduction group. Compared with the healthy side, the clavicle length of the affected side was shortened by 7.74%±3.51% of pre-operation and 0.71%±1.00% of post-operation, there was statistically significant difference in the length of clavicle shortening of pre- and post-operation ( t=3.84, P<0.001). The fracture healing time was 10.48±2.39 weeks. The removal time of ELIN was 13.39±2.69 weeks. At the last follow-up, the Constant-Murley score of shoulder joint was 98.87±1.74. The average of DASH score was 1.13 (range, 0-10). There were 18 cases of skin irritation after operation, of which 13 cases formed pressure sores at the tail end 3-6 weeks after the operation, and were treated with dressing change and keeping clean; 4 cases of skin irritation at the tail end formed bursitis, which disappeared after removal of the internal fixation. In 1 case, the tip of ELIN penetrated the anterior cortex from the proximal clavicle and stimulated the skin. Radiograms showed continuous callus at 4 weeks after operation, and there was no local tenderness on the physical examination, which reached the clinical healing standard, and the symptoms were relieved after the nail was removed. No serious complications such as neural and vascular injury, nail breaking, delayed healing, infection, numbness or discomfort in the subclavian area occurred in all cases, and all patients were satisfied or basically satisfied with the aesthetic of the skin appearance. Conclusion:Minimally invasive and microstress shielding fixation of mid-clavicle fracture with ELIN have the advantages of simple operation, minimally invasive, beautiful appearance, anti-short-shrinkage and rapid fracture healing etc. It is an effective surgical method for the treatment of mid-clavicle fractures.