In view of the few studies on the influence of Armillaria spp. infection on the content of the chemical components in different parts of Polyporus umbellatus sclerotia, this study determined the biomass of P. umbellatus sclerotia and the contents of ergosterol, polyporusterone A, polyporusterone B and polysaccharide in the separated cavity wall of the sclerotia and the uninfected part of the sclerotia in different harvesting years under the conditions of A. gallica and A. mellea infection respectively. According to the difference of content and dynamic changes of the polysaccharide and the steroid substances, the superior Armillaria sp. was screened to obtain the best harvest years of P. umbellatus. Using HPLC and UV-VIS spectrophotometry methods, the contents of ergosterol, polyporusterone A, polyporusterone B and polysaccharide in P. umbellatus sclerotia infected by the two Armillaria spp. in different years were determined. In addition, the differentially expressed genes related to P. umbellatus polysaccharide synthesis were screened according to the transcriptomic data of different parts of P. umbellatus after A. mellea infection. With the increase of years, the biomass of sclerotia infected by different Armillaria spp. had significant differences, and there were significant differences in the four components of sclerotia. The four components of the separated cavity wall of the sclerotia were significantly higher than those of the uninfected part. The best harvest time was the third year after cultivation. Transcriptomic analysis showed that the infection of Armillaria spp. could significantly promote polysaccharide synthesis, which provided a basis for polysaccharide content determination at the molecular level. The study clarified the influence of different Armillaria spp. infection on the accumulation of chemical components of P. umbellatus sclerotia, laying a foundation for exploring the symbiosis mechanism and provided a scientific clue for screening superior Armillaria sp. and guiding the artificial cultivation of P. umbellatus sclerotia.

Background The prevalence of low back pain among workers using vibrating tools in the automobile manufacturing industry is high; however, research on associated risk factors remains limited. Objective To investigate the association between use of vibrating tools and low back pain among automobile manufacturing workers, and to estimate related population attributable risk percentage (PAR%). Methods A cross-sectional survey was conducted using the Chinese Musculoskeletal Disorders Questionnaire among workers with over one year of service in an automobile manufacturing enterprise. Workers were categorized into an exposed group (vibrating tool users) and a control group (non-users) based on their use of vibrating tools during work. The variables showing statistically significant differences between the two groups were selected as covariates for matching by 1∶2 nearest-neighbor propensity score. Chi-square test was used to compare the prevalence of low back pain between the matched exposed and control groups. Log-binomial regression model was employed to calculate the prevalence ratio (PR), and the PAR% of low back pain attributable to vibrating tool use was subsequently determined. Results A total of 6973 valid questionnaires were collected, comprising 5676 males and 1297 females, with an overall low back pain prevalence of 40.3% (2809/6973). The exposed group included 1255 workers (1134 males, 121 females), with a mean age of (44.2 ± 8.7) years and a mean tenure in the current position of (23.5 ± 9.9) years; the matching control group consisted of 2510 workers (2279 males, 231 females), with a mean age of (44.7 ± 8.6) years and a mean tenure in the current position of (24.0 ± 10.0) years. The prevalence of low back pain was 76.7% (963/1255) in the exposed group, significantly higher than the 29.9% (750/2510) in the control group (P<0.001). The log-binomial regression analysis showed a PR of 2.57 (95%CI: 2.28, 2.90) for the exposed group, with a PAR% of 22.03%. Conclusion The use of vibrating tools among automobile manufacturing workers is positively associated with reporting low back pain. Implementing effective measures to mitigate vibration hazards is crucial for reducing the burden of low back pain in this population.

TFIIB-related factor 1 (BRF1) is an important transcription factor. It specifically regulates the transcription of RNA polymerase III-dependent genes (RNA Pol III genes). The products of these genes are some small non-coding RNAs, including transfer RNAs (tRNAs) and 5S ribosomal RNAs (5S rRNA). The transcription levels of tRNAs and 5S rRNA vary with changes in intracellular BRF1 amounts. tRNAs and 5S rRNA play a crucial role in determining protein synthesis. Studies have demonstrated that dysregulation of tRNAs and 5S rRNA is closely related to cell growth, proliferation, transformation, and even tumorigenesis. BRF1 is a key factor determining the generation of tRNAs and 5S rRNA. Increasing BRF1 expression enhances cell proliferation and transformation, promoting tumor development. In contrast, repressing BRF1 activity decreases the rates of cell proliferation and transformation, and inhibits tumor growth. High levels of BRF1 are found in the samples of patients suffering from hepatocellular carcinoma, breast cancer, gastric carcinoma, lung cancer, prostate carcinoma, and other cancers. It indicates that high levels of BRF1 are closely related to the occurrence of human cancer and may be a common landmark of tumors. But there is discrepancy in the regulatory mechanisms and signaling pathways of BRF1 overexpression in different cancers. In general, high levels of BRF1 in patients suffering from cancer show short survival period and poor prognosis. However, there is one exception, namely breast cancer. Approximate 80% of cases of breast cancer are estrogen receptor-positive (ER+) and 20% are ER-. The cases with high levels of BRF1 reveal longer survival period and better prognosis after they accepted the hormone treatment by Tamoxifen (Tam), compared to the cases with low level BRF1. It seems like a contradiction. Most of the cases with high levels of BRF1 belong to ER+ status. Tam has been used to treat ER+ cases of breast cancer after diagnosis and surgery. Thus, hormone therapy, such as Tam, is more effective on these patients. This is because, on one hand, that Tam competes with E2 (17β-estradiol) to bind to estrogen receptor α (ERα), but does not dissociate to occupy the receptors, blocking E2 binding to this receptor and inhibiting its biological effects. On other hand, Tam can inhibit the expression of BRF1, leading to a decline of intracellular BRF1 levels. Therefore, the actual levels of BRF1 are lower in the patients with ER+ breast cancer. It appears the prognosis of the high BRF1 expression cases better than that of the low BRF1 expression cases. Myocardial hypertrophy manifests magnification of cardiomyocyte volume rather than number increasing in the postnatal heart. Myocardial hypertrophy is a critical risk factor underlying cardiovascular diseases. No matter how myocardial hypertrophy occur, it will ultimately lead to myocardial dysfunction and heart failure. Hypertrophic growth of cardiomyocytes requires a large amount of protein synthesis to meet its needs of cardiomyocyte growth. Animal models and cell experiments have shown that myocardial hypertrophy stimulates a significant increase in BRF1 expression and transcription of tRNAs and 5S rRNA. Interestingly, elevated levels of BRF1 are found in the myocardium tissues of patients with myocardial hypertrophy. These studies demonstrate that BRF1 indeed plays a critical role in myocardial hypertrophy. In summary, high levels of BRF1 are found in patients suffering from different cancers and myocardial hypertrophy. It implies that BRF1 is a promising biological target of cancer and cardiomyopathy. BRF1 is expected to become a common biomarker for early diagnosis and prognostic observation of different human cancers. It is also an important biomarker for the diagnosis and treatment of cardiomyopathy. BRF1 not only holds an important position in the field of basic medical research but also has great prospects for translational medicine. In the present article, we summarize the progress on studies of BRF1 expressions in cancer and cardiomyopathy, proposes future research directions. It is a new research area. Here, we emphasize the significancy of BRF overexpression in the two huge diseases of human, cancer and cardiomyopathy to raise people's attention to this field.

ObjectiveTo explore the impact of overtime work on work-related musculoskeletal disorders in male employees in the automobile manufacturing industry. Methods A total of 1 731 male employees with more than one year of working experience from an automobile manufacturing industry were selected as the research subjects using judgment sampling method. The Musculoskeletal Disorder Questionnaire was used to investigate the prevalence of musculoskeletal disorder. Employees were divided into control group and overtime group, and a 1∶1 matching was performed using propensity score matching method, and 573 pairs were successfully matched. The prevalence of WMSDs in various body parts was compared between the two groups. Results The overtime working rate of the research subjects was 34.2%, and the prevalence of WMSDs was 57.1%. Overtime work increased the risk of WMSDs in the neck, shoulders, upper back, lower back, ankle/feet, and overall body of the workers (all P<0.05), with the odd ratio and 95% confidence interval of 1.43 (1.10-1.85), 1.38 (1.06-1.80), 1.42 (1.07-1.89), 1.28 (1.01-1.62), 1.37 (1.01-1.87), and 1.49 (1.17-1.89), respectively. However, there was no association between overtime work and the risk of WMSDs in the elbows, hands/wrists, hips, and knees of the subjects (all P>0.05). Conclusion Overtime work increases the risk of WMSDs in the neck, shoulders, upper back, lower back, ankles/feet, and overall body of male employees in the automobile manufacturing industry. Enterprises should improve labor organization, reduce overtime work, and protect the health of workers.

Ankylosing spondylitis (AS) combined with lower cervical fracture is often categorized into unstable fracture, with a high incidence of neurological injury and a high rate of disability and morbidity. As factors such as shoulder occlusion may affect the accuracy of X-ray imaging diagnosis, it is often easily misdiagnosed at the primary diagnosis. Non-operative treatment has complications such as bone nonunion and the possibility of secondary neurological damage, while the timing, access and choice of surgical treatment are still controversial. Currently, there are no clinical practice guidelines for the treatment of AS combined with lower cervical fracture with or without dislocation. To this end, the Spinal Trauma Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate Clinical guidelines for the treatment of ankylosing spondylitis combined with lower cervical fracture in adults ( version 2024) in accordance with the principles of evidence-based medicine, scientificity and practicality, in which 11 recommendations were put forward in terms of the diagnosis, imaging evaluation, typing and treatment, etc, to provide guidance for the diagnosis and treatment of AS combined with lower cervical fracture.

Objective:To study the current status of longitudinal extrauterine growth restriction (EUGR) in extremely preterm infants (EPIs) and to develop a prediction model based on clinical data from multiple NICUs.Methods:From January 2017 to December 2018, EPIs admitted to 32 NICUs in North China were retrospectively studied. Their general conditions, nutritional support, complications during hospitalization and weight changes were reviewed. Weight loss between birth and discharge > 1SD was defined as longitudinal EUGR. The EPIs were assigned into longitudinal EUGR group and non-EUGR group and their nutritional support and weight changes were compared. The EPIs were randomly assigned into the training dataset and the validation dataset with a ratio of 7∶3. Univariate Cox regression analysis and multiple regression analysis were used in the training dataset to select the independent predictive factors. The best-fitting Nomogram model predicting longitudinal EUGR was established based on Akaike Information Criterion. The model was evaluated for discrimination efficacy, calibration and clinical decision curve analysis.Results:A total of 436 EPIs were included in this study, with a mean gestational age of (26.9±0.9) weeks and a birth weight of (989±171) g. The incidence of longitudinal EUGR was 82.3%(359/436). Seven variables (birth weight Z-score, weight loss, weight growth velocity, the proportion of breast milk ≥75% within 3 d before discharge, invasive mechanical ventilation ≥7 d, maternal antenatal corticosteroids use and bronchopulmonary dysplasia) were selected to establish the prediction model. The area under the receiver operating characteristic curve of the training dataset and the validation dataset were 0.870 (95% CI 0.820-0.920) and 0.879 (95% CI 0.815-0.942), suggesting good discrimination efficacy. The calibration curve indicated a good fit of the model ( P>0.05). The decision curve analysis showed positive net benefits at all thresholds. Conclusions:Currently, EPIs have a high incidence of longitudinal EUGR. The prediction model is helpful for early identification and intervention for EPIs with higher risks of longitudinal EUGR. It is necessary to expand the sample size and conduct prospective studies to optimize and validate the prediction model in the future.

Objective To explore the efficacy and safety of recombinant human anti-severe acute respiratory syn-drome coronavirus 2(anti-SARS-CoV-2)monoclonal antibody injection(F61 injection)in the treatment of patients with coronavirus disease 2019(COVID-19)combined with renal damage.Methods Patients with COVID-19 and renal damage who visited the PLA General Hospital from January to February 2023 were selected.Subjects were randomly divided into two groups.Control group was treated with conventional anti-COVID-19 therapy,while trial group was treated with conventional anti-COVID-19 therapy combined with F61 injection.A 15-day follow-up was conducted after drug administration.Clinical symptoms,laboratory tests,electrocardiogram,and chest CT of pa-tients were performed to analyze the efficacy and safety of F61 injection.Results Twelve subjects(7 in trial group and 5 in control group)were included in study.Neither group had any clinical progression or death cases.The ave-rage time for negative conversion of nucleic acid of SARS-CoV-2 in control group and trial group were 3.2 days and 1.57 days(P=0.046),respectively.The scores of COVID-19 related target symptom in the trial group on the 3rd and 5th day after medication were both lower than those of the control group(both P＜0.05).According to the clinical staging and World Health Organization 10-point graded disease progression scale,both groups of subjects improved but didn't show statistical differences(P＞0.05).For safety,trial group didn't present any infusion-re-lated adverse event.Subjects in both groups demonstrated varying degrees of elevated blood glucose,elevated urine glucose,elevated urobilinogen,positive urine casts,and cardiac arrhythmia,but the differences were not statistica-lly significant(all P＞0.05).Conclusion F61 injection has initially demonstrated safety and clinical benefit in trea-ting patients with COVID-19 combined with renal damage.As the domestically produced drug,it has good clinical accessibility and may provide more options for clinical practice.

Objective:To investigate the occurrence of low back work-related musculoskeletal disorders (WMSDs) among workers in a container manufacturing factory, and to explore the influencing factors.Methods:In June 2022, 952 workers from a container factory were selected as the research objects by cluster random sampling. Through questionnaire survey, the incidence of low back WMSDs symptoms among workers in the past one year was collected, and the influencing factors of low back WMSDs were analyzed by logistic regression.Results:The incidence rate of low back WMSDs was 46.7% (445/952). The factors with higher exposure at work were frequent slight bending (77.0%, 733/952), frequent overtime (74.1%, 705/952), and the need to turn around while working (62.3%, 593/952). Multivariate logistic regression analysis showed that age over 40 years old, smoking, drinking, often bending over slightly, sitting for a long time, maintaining a large bending posture for a long time, often working overtime, limited operating space, and there was always a need to complete conflicting things in the container manufacturing factory workers were the risks of increasing the low back WMSDs ( OR=1.68, 1.96, 2.47, 1.49, 1.84, 2.11, 1.90, 1.82, 2.00, P<0.05). Standing at work, always friendly colleagues, and always supportive and helpful leaders were protective factors for low back WMSDs ( OR=0.60, 0.32, 0.40, P<0.05) . Conclusion:The incidence of low back WMSDs symptoms in container manufacturing workers is high, and work-related factors such as frequent slight bending, long time holding large bending posture and limited operating space are the focus of ergonomic intervention in container manufacturing enterprises.

Objective:To explore the risk factors of neck work-related musculoskeletal disorders (WMSDs) among automobile manufacturing enterprise workers, and construct the risk prediction model.Methods:In May 2022, a cluster convenience sampling method was used to selet all front-line workers from an automobile manufacturing factory in Xiangyang City as the research objects. And a questionnaire survey was conducted using the modified Musculoskeletal Disorders Questionnaire to analyze the occurrence and exposure to risk factors of neck WMSDs. Logistic regression was used to analyze the influencing factors of workers' neck WMSDs symptoms, and Nomogram column charts was used to construct the risk prediction model. The accuracy of the model was evaluated by the receiver operating characteristic (ROC) curve, the Bootstrap resampling method was used to verify the model, Hosmer-Lemeshow goodness of fit test was used to evaluate the model, and the Calibration curve was drawn.Results:A total of 1783 workers were surveyed, and the incidence of neck WMSDs symptoms was 24.8% (442/1783). Univariate logistic regression showed that age, female, smoking, working in uncomfortable postures, repetitive head movement, feeling constantly stressed at work, and completing conflicting tasks in work could increase the risk of neck WMSDs symptoms in automobile manufacturing enterprise workers ( OR=1.37, 95% CI: 1.16-1.62; OR=2.85, 95% CI: 1.56-5.20; OR=1.50, 95% CI: 1.18-1.91; OR=1.18, 95% CI: 1.02-1.37; OR=1.34, 95% CI: 1.04-1.72; OR=1.62, 95% CI: 1.21-2.17; OR=1.48, 95% CI: 1.13-1.92; P<0.05). While adequate rest time could reduce the risk of neck WMSDs symptoms ( OR=0.56, 95% CI: 0.52-0.86, P<0.05). The risk prediction model of neck WMSDs of workers in automobile manutacturing factory had good prediction efficiency, and the area under the ROC curve was 0.72 (95% CI: 0.70-0.75, P<0.001) . Conclusion:The occurrence of neck WMSDs symptoms of workers in automobile manufacturing factory is relatively high. The risk prediction model constructed in this study can play a certain auxiliary role in predicting neck WMSDs symptoms of workers in automobile manufacturing enterprise workers.

Objective This study aimed to investigate the potential relationship between urinary metals copper (Cu), arsenic (As), strontium (Sr), barium (Ba), iron (Fe), lead (Pb) and manganese (Mn) and grip strength. Methods We used linear regression models, quantile g-computation and Bayesian kernel machine regression (BKMR) to assess the relationship between metals and grip strength.Results In the multimetal linear regression, Cu (β=-2.119), As (β=-1.318), Sr (β=-2.480), Ba (β=0.781), Fe (β= 1.130) and Mn (β=-0.404) were significantly correlated with grip strength (P < 0.05). The results of the quantile g-computation showed that the risk of occurrence of grip strength reduction was -1.007 (95％ confidence interval:-1.362, -0.652; P < 0.001) when each quartile of the mixture of the seven metals was increased. Bayesian kernel function regression model analysis showed that mixtures of the seven metals had a negative overall effect on grip strength, with Cu, As and Sr being negatively associated with grip strength levels. In the total population, potential interactions were observed between As and Mn and between Cu and Mn (Pinteractions of 0.003 and 0.018, respectively).Conclusion In summary, this study suggests that combined exposure to metal mixtures is negatively associated with grip strength. Cu, Sr and As were negatively correlated with grip strength levels, and there were potential interactions between As and Mn and between Cu and Mn.