Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: This study focused on analyzing the contact pressure and area on different patellar component designs in total knee arthroplasty (TKA) to evaluate biomechanics related to the patellofemoral (PF) joint. Materials and Methods: The patellar components studied included the dome design, modified dome design, and anatomical design implants. Using finite element analysis and mechanical testing, the pressure and area were evaluated. The first loading condition was simulated at flexion angles of 0°, 15°, 45°, 90°, 120°, and 150°. The second loading condition was simulated for a clinically relevant scenario, involving a 2-mm medial shift at a flexion angle of 45°. Results: For both the modified dome and anatomical designs, the contact area and pressure increased with the flexion angle. The dome design reached its maximum contact area at a flexion angle of 120°. Among the designs, the anatomical design had the largest contact area and a lower contact pressure compared to the dome and modified dome designs. However, when a medial shift of 2 mm was simulated at a 45° flexion angle, which can occur clinically, the anatomical design showed edge contact, leading to higher contact pressure and reduced contact area. In contrast, the modified dome design demonstrated the lowest contact pressure and the greatest contact area under the same shifted conditions. Conclusion These findings suggest that the design of the patellar component significantly affects patellar biomechanics and stability. Specifically, the modified dome design showed improved biomechanical effects in clinically relevant scenarios. Therefore, patellar components with a modified dome design are expected to better manage PF joint pain and reduce complications in TKA.

Purpose: Alpha-fetoprotein (AFP) is a prognostic marker for hepatocellular carcinoma (HCC). We investigated the prognostic value of AFP levels in patients who achieved complete response (CR) to transarterial chemoembolization (TACE) for HCC. Materials and Methods: Between 2005 and 2018, 890 patients with HCC who achieved a CR to TACE were recruited. An AFP responder was defined as a patient who showed elevated levels of AFP (>10 ng/mL) during TACE, but showed normalization or a >50% reduction in AFP levels after achieving a CR. Results: Among the recruited patients, 569 (63.9%) with naïve HCC and 321 (36.1%) with recurrent HCC after complete resection were treated. Before TACE, 305 (34.3%) patients had multiple tumors, 219 (24.6%) had a maximal tumor size >3 cm, and 22 (2.5%) had portal vein tumor thrombosis. The median AFP level after achieving a CR was 6.36 ng/mL. After a CR, 473 (53.1%) patients experienced recurrence, and 417 (46.9%) died [median progression-free survival (PFS) and overall survival (OS) of 16.3 and 62.8 months, respectively]. High AFP levels at CR (>20 ng/mL) were independently associated with a shorter PFS [hazard ratio (HR)=1.403] and OS (HR=1.284), together with tumor multiplicity at TACE (HR=1.518 and 1.666, respectively). AFP non-responders at CR (76.2%, n=359 of 471) showed a shorter PFS (median 10.5 months vs. 15.5 months, HR=1.375) and OS (median 41.4 months vs. 61.8 months, HR=1.424) than AFP responders (all p=0.001). Conclusion High AFP levels and AFP non-responders were independently associated with poor outcomes after TACE. AFP holds clinical implications for detailed risk stratification upon achieving a CR after TACE.

Background: Hodgkin's lymphoma (HL) constitutes 10%–20% of all malignant lymphomas and has a high cure rate (5-year survival, around 90%). Recently, interest has increased concerning preventing secondary complications (secondary cancer, endocrine disorders) in long-term survivors. We aimed to study the epidemiologic features and therapeutic outcomes of HL in children, adolescents, and young adults in Korea. Methods: We performed a multicenter, retrospective study of 224 patients aged < 25 years diagnosed with HL at 22 participating institutes in Korea from January 2007 to August 2016. Results: A higher percentage of males was diagnosed at a younger age. Nodular sclerosis histopathological HL subtype was most common, followed by mixed cellularity subtype.Eighty-one (36.2%), 101 (45.1%), and 42 (18.8%) patients were classified into low, intermediate, and high-risk groups, respectively. Doxorubicin, bleomycin, vinblastine, dacarbazine was the most common protocol (n = 102, 45.5%). Event-free survival rate was 86.0% ± 2.4%, while five-year overall survival (OS) rate was 96.1% ± 1.4%: 98.7% ± 1.3%, 97.7% ± 1.6%, and 86.5% ± 5.6% in the low, intermediate, and high-risk groups, respectively (P = 0.021). Five-year OS was worse in patients with B-symptoms, stage IV disease, highrisk, splenic involvement, extra-nodal lymphoma, and elevated lactate dehydrogenase level.In multivariate analysis, B-symptoms and extra-nodal involvement were prognostic factors for poor OS. Late complications of endocrine disorders and secondary malignancy were observed in 17 and 6 patients, respectively. Conclusion This is the first study on the epidemiology and treatment outcomes of HL in children, adolescents, and young adults in Korea. Future prospective studies are indicated to develop therapies that minimize treatment toxicity while maximizing cure rates in children, adolescents, and young adults with HL.

PURPOSE: The megacolon after repairing an anorectal malformation is not a rare complication, and there is much controversiy on the causes, the treatment of choice and the results after a longterm follow-up. We present 5 cases of a megacolon after the repair of an anorectal malformation, which were controlled with either a surgical resection or conservative treatment. METHODS: Five patients with a megacolon after the repair of an anorectal malformation were studied. A retrospective chart review was done and fecal continence was evaluated with an individual interview. RESULTS: All five patients initially underwent conservative treatment with laxatives and/or enemas. One Patient responded well to conservative treatment and the diameter of the bowel reduced to normal size. Another patient responded to conservative treatment after correcting the location of the anus. Three patients needed a surgical resection and one of those needed a further procedure to correct the anal location. After the surgical resection of the megacolon and/or correction of the anus (one out of the three patients), they soon reported an almost normal bowel habit. CONCLUSION: The first step in treating a megacolon after repairing an anorectal malformation was conservative treatment. However patients without an adequate response to conservative treatment are best managed with a surgical resection. The cause of the megacolon is now under investigation and the lack of adequate management after repair is one of the subjects.
Anal Canal ; Enema ; Follow-Up Studies ; Humans ; Laxatives ; Megacolon* ; Retrospective Studies

Four cases of primary transitional cell carcinoma (TCC) arising in the ovary (3 cases) and the parovarium (1 case) were collected for clinicopathologic analysis. The mean age was 46.2 years (range, 39-57 years). Two patients complained abdominal discomfort and vaginal discharge, respectively. Other 2 cases were incidentally found from routine check. Grossly, the tumors were solid and cystic (2 cases), solid (1 case) and surface papillary growth on capsule (1 case). Microscopically, the tumor showed almostly same to the histologic features of TCC of urinary bladder. Three cases were pure TCC, and one was mixed TCC and serous carcinoma. FIGO stage were 1 IIa, 2 IIc, and 1 IIIc. Treatment was surgery with adjuvant chemotherapy. Two patients are alive with no evidence of disease, and two have lung or brain metastasis.
Brain ; Carcinoma, Transitional Cell* ; Chemotherapy, Adjuvant ; Female ; Humans ; Lung ; Neoplasm Metastasis ; Ovary ; Urinary Bladder ; Vaginal Discharge