Objective To monitor the susceptibility of clinical isolates to antimicrobial agents in tertiary hospitals in major regions of China in 2022.Methods Clinical isolates from 58 hospitals in China were tested for antimicrobial susceptibility using a unified protocol based on disc diffusion method or automated testing systems.Results were interpreted using the 2022 Clinical &Laboratory Standards Institute(CLSI)breakpoints.Results A total of 318 013 clinical isolates were collected from January 1,2022 to December 31,2022,of which 29.5％were gram-positive and 70.5％were gram-negative.The prevalence of methicillin-resistant strains in Staphylococcus aureus,Staphylococcus epidermidis and other coagulase-negative Staphylococcus species(excluding Staphylococcus pseudintermedius and Staphylococcus schleiferi)was 28.3％,76.7％and 77.9％,respectively.Overall,94.0％of MRSA strains were susceptible to trimethoprim-sulfamethoxazole and 90.8％of MRSE strains were susceptible to rifampicin.No vancomycin-resistant strains were found.Enterococcus faecalis showed significantly lower resistance rates to most antimicrobial agents tested than Enterococcus faecium.A few vancomycin-resistant strains were identified in both E.faecalis and E.faecium.The prevalence of penicillin-susceptible Streptococcus pneumoniae was 94.2％in the isolates from children and 95.7％in the isolates from adults.The resistance rate to carbapenems was lower than 13.1％in most Enterobacterales species except for Klebsiella,21.7％-23.1％of which were resistant to carbapenems.Most Enterobacterales isolates were highly susceptible to tigecycline,colistin and polymyxin B,with resistance rates ranging from 0.1％to 13.3％.The prevalence of meropenem-resistant strains decreased from 23.5％in 2019 to 18.0％in 2022 in Pseudomonas aeruginosa,and decreased from 79.0％in 2019 to 72.5％in 2022 in Acinetobacter baumannii.Conclusions The resistance of clinical isolates to the commonly used antimicrobial agents is still increasing in tertiary hospitals.However,the prevalence of important carbapenem-resistant organisms such as carbapenem-resistant K.pneumoniae,P.aeruginosa,and A.baumannii showed a downward trend in recent years.This finding suggests that the strategy of combining antimicrobial resistance surveillance with multidisciplinary concerted action works well in curbing the spread of resistant bacteria.

Background: Inactivated vaccines are limited in preventing foot-and-mouth disease (FMD) due to safety problems. Recombinant virus-like particles (VLPs) are an excellent candidate for a novel vaccine for preventing FMD, given that VLPs have similar immunogenicity as natural viruses and are replication- and infection-incompetent. Objectives: The 3C protease and P1 polyprotein of type O FMD virus (FDMV) was expressed in yeast Hansenula polymorpha to generate self-resembling VLPs, and the potential of recombinant VLPs as an FMD vaccine was evaluated. Methods: BALB/c mice were immunized with recombinant purified VLPs using CpG oligodeoxynucleotide and aluminum hydroxide gel as an adjuvant. Cytokines and lymphocytes from serum and spleen were analyzed by enzyme-linked immunosorbent assay, enzyme-linked immunospot assay, and flow cytometry. Results: The VLPs of FMD were purified successfully from yeast protein with a diameter of approximately 25 nm. The immunization of mice showed that animals produced high levels of FMDV antibodies and a higher level of antibodies for a longer time. In addition, higher levels of interferon-γ and CD4 + T cells were observed in mice immunized with VLPs. Conclusions The expression of VLPs of FMD in H. polymorpha provides a novel strategy for the generation of the FMDV vaccine.

Cortical interneurons can be categorized into distinct populations based on multiple modalities, including molecular signatures and morpho-electrical (M/E) properties. Recently, many transcriptomic signatures based on single-cell RNA-seq have been identified in cortical interneurons. However, whether different interneuron populations defined by transcriptomic signature expressions correspond to distinct M/E subtypes is still unknown. Here, we applied the Patch-PCR approach to simultaneously obtain the M/E properties and messenger RNA (mRNA) expression of >600 interneurons in layer V of the mouse somatosensory cortex (S1). Subsequently, we identified 11 M/E subtypes, 9 neurochemical cell populations (NCs), and 20 transcriptomic cell populations (TCs) in this cortical lamina. Further analysis revealed that cells in many NCs and TCs comprised several M/E types and were difficult to clearly distinguish morpho-electrically. A similar analysis of layer V interneurons of mouse primary visual cortex (V1) and motor cortex (M1) gave results largely comparable to S1. Comparison between S1, V1, and M1 suggested that, compared to V1, S1 interneurons were morpho-electrically more similar to M1. Our study reveals the presence of substantial M/E variations in cortical interneuron populations defined by molecular expression.
Mice ; Animals ; Neocortex/physiology* ; Mice, Transgenic ; Interneurons/physiology*

Animals ; Brain Diseases/pathology* ; Cell Cycle ; Interneurons/pathology* ; Median Eminence/pathology* ; Mice

The status of lymph node metastasis is an important prognostic factor for many malignant tumors, including lung cancer. In the 8th edition of the TNM staging system for lung cancer, the T staging had obvious changes and refinements, but the N staging had little changes. Recently, several studies have found that the prognosis of patients with the same N stage can vary greatly, suggesting that a more detailed subgroup of patients with the same N stage should be subdivided, including the inclusion of extra-capsular lymph node metastases (ENE). In this review, we reviewed the definition, classification/grading, imaging diagnosis, pathological diagnosis, related molecular markers and their relationship with the prognosis of lung cancer patients.

Objective To construct a three-dimensional finite element model to investigate the biomechanical mechanism of carotid blast injuries.Methods Based on the head and neck CT angiography data of a healthy male volunteer,the 3D geometric model was extracted by Mimics software.The 3D solid model was obtained by fitting the geometric model to the non-uniform rational B-splines (NURBS) by Geomagic Studio software.The mesh of blood vessels,blood and soft tissue was divided by HyperMesh software to obtain the three-dimensional finite element model of the carotid artery.The material parameters and boundary conditions were set,and the vessel wall rupture damage threshold was 1 MPa.The dynamic process of carotid injury caused by MK3A2 grenade explosion shock wave at the distance of 60,70 and 80 cm to the neck was simulated using the LS-DYNA,generating the shock waveform and peak overpressure.The stress cloud map was used to analyze the stress distribution and damage morphology,and the stress curve was used to analyze the mechanical changes.Results The peak values of shock wave overpressure were 0.45,0.63 and 0.96 MPa at the distance of 80,70 and 60 cm away from the explosion center,respectively.At 80 cm,the peak stress of vessel wall was 0.43 MPa,and the vessel wall was not ruptured;at 70 cm,the peak stress of anonyma was greater than 1 MPa,which resulted in small rupture;at 60 cm,the peak stress of both anonyma the ascending aorta were greater than 1 MPa,leading to obvious rupture.The root part of the common carotid artery,anonyma and the arch of the aorta were high stress concentration areas,manifested as high-prevalence areas of damage and rupture.Conclusions The finite element model of explosive carotid artery injury is successfully constructed,which can be used to analyze the mechanical response and damage mechanism of carotid blast injuries.The main cause of injury and rupture is that the sudden change of stress in the process of explosion shock reaches or exceeds the threshold of vascular wall injury.Carotid artery rupture will occur when the vessel wall stress peak is greater than 1 MPa at 60 and 70 cm away from the explosion center,providing references for the clinical treatment and injury prevention.

Objective: To evaluate the efficacy of cognitive-behavioral therapy (CBT) combined with mirtazapine for patients with functional dyspepsia (FD). Methods: Totally 121 patients with FD who met Rome Ⅳ diagnostic criteria in clinic of clinical psychiatry of a general hospital were collected.They were randomly divided into combined treatment group(n=61) and single drug group(n=60). The treatment period was 8 weeks.All patients with FD were given mirtazapine.The combined treatment group received 8 times systemic CBT treatments at the same time.Symptom checklist-90 (SCL-90) and gastrointestinal integral scale (GIS) were evaluated in all patients before and after 8-week intervention. Results: After 8 weeks of intervention, the total score of SCL-90 scale, somatization, compulsion, depression, paranoia and other factors in the combined treatment group were lower than those in the single group(130.26±36.18 vs 147.95±45.55, 1.34±0.44 vs 1.51±0.5, 1.66±0.50 vs 1.90±0.66, 1.47±0.52 vs 1.69±0.63, 1.48±0.49 vs 1.70±0.61, 1.47±0.50 vs 1.73±0.68, respectively)(all P<0.05). After 8 weeks of intervention, the total score of the GIS scale in the combined treatment group (6.77±5.05 vs 9.49±5.24), vomiting (0.57±0.77 vs 0.88±0.91), spastic upper abdominal pain (0.43±0.74 vs 0.90±1.08) and post-sternal discomfort (0.57±0.89 vs 1.05±1.19) were significantly lower than that of the simple drug group after intervention(6.77±5.05 vs 9.49±5.24, 0.57±0.77 vs 0.88 ±0.91, 0.43±0.74 vs 0.90±1.08 and 0.57±0.89 vs 1.05±1.19, respectively), and the differences were statistically significant (all P<0.05). Conclusion CBT combined with mirtazapine in the treatment of FD is superior to drug therapy alone.CBT combined with mirtazapine can improve the emotional problems in the treatment of FD and further improving the digestive function.

Objective To explore the relationship between anhedonia,alexithymia and self-efficacy in college students.Methods 260 college students were tested with Snaith-Hamilton Pleasure Scale (SHAPS),Temporal Experience of Pleasure Scale (TEPS),20-item Toronto Alexithymia Scale (TAS-20)and General Self-Efficacy Scale (GSES).Results (1) Males showed obviously higher level of SHAPS scores (24.91±5.14) and lower level of anticipatory pleasure of TEPS (TEPS-ANT) scores(31.81±5.79)than females (22.97±5.34 and 33.36±5.71,respectively).(2)Significant difference existed between the high-scoring,the middle-scoring and the low-scoring anhedonia group in TAS factor 1 (difficulty in identifying feelings) and GSES (F=3.11,5.30,P＜0.05 or 0.01),the scores of TAS factor 1 (difficulty in identifying feelings) in high-scoring anhedonia group were higher than that in low-scoring anhedonia group (20.24±4.94 vs 18.10±5.07,P＜0.01),and the scores of GSES in high-scoring anhedonia group were lower than that in low-scoring anhedonia group (24.97±6.72 vs 27.90±4.37,P＜0.01).(3)The SHAPS scores were positively related to TAS factor 2 (difficulty in describing feelings) and factor 3 (externally oriented thinking) (r =0.18,0.27,both P＜0.01),negatively related to GSES scores(r=-0.33,P＜0.01).Both TEPS-ANT and consummatory pleasure of TEPS (TEPS-CON) were negatively related to TAS factor1 (difficulty in identifying feelings)scores (r=-0.22,P＜ 0.01;r =-0.15,P＜ 0.05),positively related to GSES scores (r =0.28,0.26,both P＜0.01).(4)Layer multivariate linear regression analysis showed that the SHAPS scores were significant predictors of the general self-efficacy(β=-0.33,P＜0.01).Conclusions The anhedonia in college students has a closely relationship with alexithymia and self-efficacy,college students with high anhedonia have high level of alexithymia and low level of self-efficacy.

Objective To investigate the value of computer aided design and 3D printing model in operation for complex mandibular fractures.Methods The clinical data of 136 patients with complex mandibular fractures treated from June 2006 to June 2016 were retrospectively analyzed.The patients were divided into 3D group (n =28) and conventional group (n =108) based on the use of computer aided design and 3D printing model.There were 24 males and four females in 3D group,with the age of (33.8 ± 15.4) years.There were 91 males and 17 females in conventional group,with the age of (30.3± 11.9)years.The 3D group used computer aided design and 3D printing model to develop the surgical plan,and the conventional group used traditional CT scan image data.The operation time,intraoperative blood loss,incidence of postoperative adverse events,and the distance differences between the ipsilateral and the five contralateral maxillofacial markers were compared between the two groups (△L1:the difference between the mandibular angle point and the condyle apex;△L2:the difference between the mandibular angle point and the chin vertex;△L3:the difference between the apex of the chin and the apical point;△L4:the difference between the inner mandibular angle point and the Inferior alveolar margin point;△L5:the distance between the inner mandibular angle and the sagittal plane).Results The operation time in the 3D group and the conventional group were 155 (126.25,183.75)min and 235 (156.25,268.75)min,respectively.The intraoperative blood loss in the 3D group and the conventional group were 100 (50.0,187.5) ml and 125 (100.0,200.0) ml,respectively.In the 3D group,one patient had mild occlusion disorder.In the conventional group,4 patients had postoperative infection,1 repulsion reaction of internal fixation device,and 19 mild occlusion disorder.The differences between the two groups in operation time and postoperative adverse events were statistically significant (P ＜ 0.05),but there was no significant difference in intraoperative blood loss (P ＞ 0.05).There was no significant difference between the ipsilateral △L and contralateral △L in two groups (P ＞ 0.05).No significant difference in △L4 was found (P ＞ 0.05),but there were significant differences in △L1,△L2,△L3,and △L5 between the two groups (P ＜0.05).Conclusion For patients with complex mandibular fractures,the use of computer-aided design and 3D printing model can helps shorten operation time,reduce postoperative adverse events and hence improve the fracture reduction outcome.

Objective To optimize the formulation of metoprolol succinate ( MS) controlled release pellets by central composite design-response surface methodology .Methods MS sustained-release pellets were prepared using sugar pellet cores as starter beads , ethyl cellulose as coating materials and MS itself as a pore former .The formulation of MS sustained-release pellets was optimized by a central composite design with two factors at five levels .These two factors ( two independ-ent variables) were the pore former level and coating level , and the evaluated indexes ( namely dependent variables ) included the in vitro cumulative release percentages of MS at 1, 4, 8, 12 and 16 h, respectively.Results and Conclusion The results of mathematical equation fitting suggested that the second-order quadratic model was the optimal fitting equa-tion.According to the response surfaces , the optimum values at the pore former level and coating level weve ranged from 16%to 18%and 20% to 25%, respectively .The in vitro cumulative release percentage of MS from the pellets at 1 h reached 9.15%,which consequently eliminated the lag phase in the initial release period and exhibited a good sustained-release effect.Central composite design-response surface methodology can be applied to optimizing the coating formulation for MS sustained release pellets .