Objective: To investigate the urban and rural differences in adverse outcomes of pulmonary tuberculosis (PTB) in patients with pulmonary tuberculosis-diabetes mellitus comorbidity (PTB-DM), so as to provide insights into improving the prevention and treatment measures for PTB-DM. Methods: Patients with PTB-DM who were admitted and discharged from 14 designated tuberculosis hospitals in Hangzhou City from 2018 to 2022 were selected. Basic information, and history of diagnosis and treatment were collected through hospital information systems. The adverse outcomes of PTB were defined as endpoints, and the proportions of adverse outcomes of PTB in urban and rural patients with PTB-DM were analyzed. Factors affecting the adverse outcomes of PTB were identified using a multivariable Cox proportional hazards regression model. Results: A total of 823 patients with PTB-DM were enrolled, including 354 (43.01%) urban and 469 (56.99%) rural patients. There were 112 (13.61%) patients with adverse outcomes of PTB. The proportions of adverse outcomes of PTB in urban and rural patients were 14.41% and 13.01%, respectively, with no statistically significant difference (P>0.05). Multivariable Cox proportional hazards regression analysis identified first diagnosed in county-level hospitals or above (HR=2.107, 95%CI: 1.181-3.758) and drug resistance (HR=3.303, 95%CI: 1.653-6.600) as the risk factors for adverse outcomes of PTB in urban patients with PTB-DM, while the treatment/observed management throughout the process (HR=0.470, 95%CI: 0.274-0.803) and fixed-dose combinations throughout the process (HR=0.331, 95%CI: 0.151-0.729) as the protective factors for adverse outcomes in rural patients with PTB-DM. Conclusions There are differences in influencing factors for adverse outcomes of PTB in urban and rural patients with PTB-DM. The adverse outcomes of PTB are associated with first diagnosed hospitals and drug resistance in urban patients, and are associated with the treatment/observed management and fixed-dose combinations throughout the process in rural patients.

BACKGROUND:Traditional methods of urinary tract reconstruction are limited by donor scarcity,high complication rates,and suboptimal functional recovery.Tissue engineering strategies offer new directions in this field.Since the urinary tract is mainly composed of muscle tissue,the key is to find suitable seed cells and efficiently induce them to differentiate into smooth muscle cells.Comparative studies on the efficacy of different smooth muscle cell induction regimens are still lacking. OBJECTIVE:To isolate,culture,and identify human urine-derived stem cells,and to compare the effects of two different induction protocols. METHODS:Human urine-derived stem cells were isolated from urine samples of 11 healthy adult volunteers by multiple centrifugations.Surface markers were identified by flow cytometry.The multi-directional differentiation potential of human urine-derived stem cells was verified through osteogenic and adipogenic differentiation.Differentiation was induced by transforming growth factor-β1 or transforming growth factor-β1 combined with platelet derived growth factor for 14 days.Immunofluorescence staining and western blot assay were employed to compare the expression differences of smooth muscle-specific proteins(α-SMA and SM22). RESULTS AND CONCLUSION:(1)Urine-derived stem cells were successfully isolated from the eight urine samples of healthy people.These cells exhibit a"rice grain"-like morphology and possess a robust proliferative capacity.(2)Urine-derived stem cells exhibited high expression of mesenchymal stem cell surface markers(CD73,CD90,and CD44)and extremely low expression of hematopoietic stem cell surface markers(CD34 and CD45).These cells did not express CD19,CD105,and HLA-DR.(3)After osteogenic and adipogenic differentiation,the formation of calcium nodules and lipid droplets was observed,with positive staining results from Alizarin Red S and Oil Red O staining.(4)After 14 days of smooth muscle induction culture,immunofluorescence staining revealed that the smooth muscle differentiation rate of urine-derived stem cells treated with a combination of transforming growth factor-β1 and platelet derived growth factor was significantly higher compared to those treated with transforming growth factor-β1 alone(P<0.005).(5)After 14 days of smooth muscle induction culture,western blot assay further demonstrated that the expression levels of α-SMA and SM22 in the transforming growth factor-β1/platelet derived growth factor group were significantly elevated compared to those in the transforming growth factor-β1 only group(P<0.005).These findings confirm that urine-derived stem cells can be non-invasively isolated using multiple rounds of centrifugation.Compared with transforming growth factor-β1 alone,the combination of transforming growth factor-β1 and platelet derived growth factor can improve the efficiency of inducing urine-derived stem cells to differentiate into smooth muscle cells.

ObjectiveTo improve the accuracy of discrete element method in simulating the processing of traditional Chinese medicine（TCM） powder system under low shear conditions. MethodsIn this study， extract powders of Tongsaimai tablets and Qige granules were used as the research objects， the angle of repose（AOR） and effective angle of internal friction of the two materials were determined by AOR test method and shear cell test method. Based on the Hertz-Mindlin with JKR V2 contact model and particle scaling theory， taking the particle-particle restitution coefficient（A）， particle-particle static friction coefficient（B）， particle-particle rolling friction coefficient（C）， particle-steel restitution coefficient（D）， particle-steel static friction coefficient（E）， particle-steel rolling friction coefficient（F） and Johnson-Kendall-Roberts（JKR） surface energy（G） as test factors， the simulated contact parameters of Tongsaimai tablets extract powder were first calibrated with a single reference value using AOR as the reference value， and then the simulated contact parameters of Tongsaimai tablets extract powder as well as Qige granules extract powder were co-calibrated with AOR and effective angle of internal friction as the joint reference value， respectively. Then， Plackett-Burman design was used to screen the critical contact parameters that have a significant effect on the simulated reference value， and the steepest ascent design was used to determine the optimal range of the critical contact parameters， finally， the regression model between the critical contact parameters and the simulated reference values was established through the design of the response surface test， and the critical contact parameters were calibrated based on the regression model and the desirability function approach. ResultsThe optimal combination of discrete elemental contact parameters A-G for Tongsaimai tablets extract powder under a single reference value was 0.100， 0.718， 0.616， 0.100， 0.400， 0.250 and 0.075 J·m^-2， which was validated to have relative errors of 0.10% and -8.64% for the simulated AOR and the simulated effective angle of internal friction， respectively. And the optimal combination of discrete elemental contact parameters A-G for Tongsaimai tablets extract powder at the joint reference values was 0.100， 0.682， 0.598， 0.100， 0.521， 0.294 and 0.075 J·m^-2， which was verified to have relative errors of 0.10% and -0.18% for the simulated AOR and the simulated effective angle of internal friction， respectively. The optimal combination of discrete elemental contact parameters A-G for Qige granules extract powder at the joint reference values was 0.150， 0.370， 0.330， 0.150， 0.500， 0.500 and 0.100 J·m^-2， which was verified to have relative errors of 2.70% and -1.30% for the simulated AOR and the simulated effective angle of internal friction， respectively. Compared with the single reference value method， the joint calibration method not only increased the number of the critical contact parameters for characterizing particle-device interactions， but also was more accurate and reliable. ConclusionCompared with the results of single reference value calibration， the results obtained by the method of joint calibration of discrete element simulation contact parameters with AOR and effective angle of internal friction as the reference values are more accurate， which can provide more accurate and reliable simulation physical property data for the simulation experiments of TCM extract powder under low shear process conditions.

Humans ; Nephrotic Syndrome ; Hematopoietic Stem Cell Transplantation ; Tissue Donors ; Transplantation Conditioning ; Graft vs Host Disease

Objective:To explore the effects of staged thematic painting therapy on positive emotions, alexithymia and self-efficacy in children with emotional disorders.Methods:This was a quasi-experimental study. By convenient sampling, 61 children with emotional disorders admitted from January 2022 to December 2022 to the Department of Child and Adolescent Psychology, Affiliated Psychological Hospital of Anhui Medical University were selected as the research objects, 31 patients admitted from January 2022 to June 2022 were listed as the control group and 30 patients admitted from July 2022 to December 2022 were listed as the observation group according to the time of admission.The control group was given routine psychiatric care, and the observation group was given staged thematic painting therapy on this basis. The intervention time was 6 weeks. The intervention effect was evaluated by Positive and Negative Affect Scale,Toronto Alexithymia Scale, and General Self-Efficacy Scale.Results:There were 15 males and 16 females in the control group, aged (14.19 ± 1.79) years old. There were 13 males and 17 females in the observation group, aged (14.47 ± 1.55) years old. The difference in baseline data between the two groups was not statistically significant ( P>0.05) and was comparable. There was no significant difference in the score of positive emotions, alexithymia and self-efficacy before intervention between the two groups (all P>0.05). After intervention, the scores of positive emotions and self-efficacy in the observation group were (43.20±7.41), (31.88 ± 5.42) points, which were higher than those in the control group (33.81 ± 6.92), (21.24 ± 5.41) points, the differences were statistically significant ( t=-6.19, -5.63, both P<0.05). After intervention, the scores of alexithymia in the observation group was (53.44 ± 4.68) points, which was lower than that in the control group (60.44 ± 5.52) points, the difference was statistically significant ( t=-8.72, P<0.05). Conclusions:Staged thematic painting therapy can effectively improve the positive emotions, self-efficacy and alexithymia level of children with emotional disorders, help the patients establish confidence to overcome the disease. It is valuable in clinical practice.

BACKGROUND:Ankylosing spondylitis is a chronic inflammatory disease with chronic rheumatic immunity.Soft tissue ossification and fusion and spinal stiffness can cause biomechanical changes. OBJECTIVE:To reconstruct the lumbar-sacral intervertebral disc in ankylosing spondylitis patients with lumbar kyphosis by finite element analysis,and to study the range of motion of each segment of T11-S1 and the biomechanical characteristics of annulus fibrosus and nucleus pulposus. METHODS:The imaging data were obtained from an ankylosing spondylitis patient with lumbar kyphosis.The original CT image data of continuously scanned spine were imported into Mimics 21.0 in DICOM format,and T11-S1 was reconstructed respectively.The established model was imported into 3-Matic software in the format of"Stl"to reconstruct the intervertebral disc,and the fibrous intervertebral disc model was obtained.The improved model was further imported into Hypermesh software,and the vertebra,nucleus pulposus,annulus fibrosus and ligament were mesh-divided.After the material properties were given,the model was imported into ABAQUS software to observe the range of motion of each vertebral body in seven different working conditions of T11-S1,and analyze the biomechanical characteristics of each segment of annulus fibrosus and nucleus pulposus. RESULTS AND CONCLUSION:(1)The range of motion of L1 vertebrae was higher than that of other vertebrae under six different working conditions:extension,forward flexion,rotation(left and right),and lateral flexion(left and right).The maximum range of motion was 2.18° during L1 vertebral flexion,and the minimum range of motion was 0.12° during L5 vertebral extension.(2)The annular fiber flexion at L2-L3 segments was greater than the extension(P<0.05),and the annular fiber flexion at L3-L4 and L4-L5 segments was less than the extension(P<0.05).The left rotation of L1-L2 annular fibers was greater than the right rotation(P<0.05).The left flexion of the annulus was greater than the right flexion in L1-L2,L2-L3,L3-L4,L4-L5 and L5-S1 segments(P<0.05).(3)The nucleus pulposus stresses of T11-L12,L1-L2,L2-L3,L3-L4 and L4-L5 segments in forward flexion were greater than in extension(P<0.05).The left rotation of T12-L1 and L3-L4 segments was smaller than the right rotation(P<0.05),and that of T11-T12,L1-L2,and L2-L3 segments was larger than the right rotation(P<0.05).The left flexion was larger than the right flexion in the T11-S1 segment.(4)It is concluded that in ankylosing spondylitis patients with lumbar kyphosis,the minimum range of motion of the vertebral body is located at the L5 vertebral body in extension.To prevent fractures,it is recommended to avoid exercise in the extension position.During the onset of lumbar kyphosis in patients with ankylosing spondylitis,the maximum stress of the annulus fibrosus and nucleus pulposus is located in the L1-L2 segment,which is fixed and will not alter with the change of body position.The late surgical treatment and correction of deformity should focus on releasing the pressure of the annulus fibrosus and nucleus pulposus in this segment to avoid the rupture of the annulus fibrosus and the injury of the nucleus pulposus.

BACKGROUND:Hydroxyapatite is the main inorganic component of bone tissue.The polymer has the structure and function of a biomimetic extracellular matrix.The composites of hydroxyapatite and polymer have been widely studied. OBJECTIVE:To summarize the research status of hydroxyapatite composite polymer materials for bone tissue repair. METHODS:The articles collected in PubMed,Web of Science,CNKI and WanFang databases were searched from January 2010 to April 2023.The Chinese and English search terms were"hydroxyapatite,polymer,composites,degradability,bone defect,bone repair".Finally,75 articles were included for review. RESULTS AND CONCLUSION:Polymers often used in composite with hydroxyapatite for bone tissue repair include natural polymers(collagen,chitosan,alginate,serine protein,cellulose,hyaluronic acid,and polyhydroxybutyrate)and synthetic polymers[polylactic acid,polylactic acid-hydroxyacetic acid copolymer,poly(has-lactide),poly(amino acid)and poly(vinyl alcohol)].The mechanical properties and osteoinductivity of hydroxyapatite/polymer composites were improved compared with pure hydroxyapatite.Hydroxyapatite composite with polymers can be made into porous scaffolds,hydrogels,and coatings for bone repair.Hydroxyapatite/polymer composites can accelerate bone reconstruction with a slow release of loaded drugs and cytokines due to their bionic extracellular matrix structure and function.Based on the diversity of causes of bone defects and the fact that bone repair is a complex continuous process involving multiple biological factors and proteins,repair materials with mechanical properties matching bone tissue,degradation processes synchronized with bone repair,and efficient osteogenesis and vascularization need to be further investigated.

Sepsis is a life-threatening organ dysfunction due to dysregulation of the body's response to infection. The immunosuppressive phase of sepsis is also an important cause of high morbidity and mortality in patients with advanced sepsis. Myeloid-derived suppressor cell (MDSC), as a heterogeneous population of Gr1 +CD11b + immature cells, play a pivotal role in the immune process of advanced sepsis together with programmed death-1 (PD-1) and programmed death-ligand 1 (PD-L1) with immunosuppressive properties. This review summarized the research progress of PD-1/PD-L1 pathway-mediated mechanism of MDSC in septic immunosuppression in recent years. The mechanism of action of PD-1/PD-L1 pathway in the immunosuppressive stage, the effects of PD-1/PD-L1 pathway on the "dual-signaling" model of MDSC through the signaling pathway and cytokines, as well as the time course of PD-1/PD-L1 pathway mediation in sepsis were described.

Objective:To explore the construction of abdominal aortocaval fistula (ACF) model in adenine-induced renal failure rats, and to provide a suitable animal model for subsequent mechanism and intervention researches.Methods:Adult female Sprague-Dawley rats (250-300 g) were fed with 0.75% adenine diet (renal failure group, n=60) and the same diet without adenine (control group, n=10) for 4 weeks, and the rats were randomly grouped by block randomization method with a ratio of 6∶1. Thirty rats in the renal failure group were randomly selected by block randomization method at a ratio of 1∶1 to undergo laparotomies to establish ACF models (renal failure+ACF group). The serum creatinine, blood urea nitrogen detection and Masson staining were used to evaluate the establishment of renal failure model. Small animal ultrasound imaging system was applied to verify the successful construction of the ACF model. After 6 weeks of ACF observation, blood samples were collected from the heart of rats, and ACF-vascular tissues were collected for pathological study (HE staining). Results:At 4 weeks of feeding, compared with the control group, serum creatinine [(63.8±23.5) μmol/L vs. (33.0±3.8) μmol/L, Z=3.651, P<0.001] and blood urea nitrogen [(13.1±6.9) mmol/L vs. (5.3±0.6) mmol/L, Z=3.254, P=0.001] in the renal failure group were both higher. Masson staining showed renal tubulointerstitial inflammatory cell infiltration, renal tubular epithelial cell atrophy, interstitial fibrosis and vascular injury. Five rats sacrificed after ACF surgeries, and the survival rate was 83.3%. Doppler ultrasound showed turbulent blood flow of arterial to venous shunt at the anastomosis of open ACF (23/25) in the renal failure+ACF group. HE staining showed typical eccentric neointimal hyperplasia in the outflow tract of ACF vein in the renal failure+ACF group. Conclusions:The adenine-induced ACF rat model is successfully constructed, and ACF shows typical eccentric neointimal hyperplasia. The ACF construction would provide a reliable animal model to study the mechanism and intervention of neointimal hyperplasia for autologous arteriovenous fistula.

Objective:To investigate the current status of endoscopic treatment for gastroesophageal varices in portal hypertension in China, and to provide supporting data and reference for the development of endoscopic treatment.Methods:In this study, initiated by the Liver Health Consortium in China (CHESS), a questionnaire was designed and distributed online to investigate the basic condition of endoscopic treatment for gastroesophageal varices in portal hypertension in 2022 in China. Questions included annual number and indication of endoscopic procedures, adherence to guideline for preventing esophagogastric variceal bleeding (EGVB), management and timing of emergent EGVB, management of gastric and isolated varices, and improvement of endoscopic treatment. Proportions of hospitals concerning therapeutic choices to all participant hospitals were calculated. Guideline adherence between secondary and tertiary hospitals were compared by using Chi-square test.Results:A total of 836 hospitals from 31 provinces (anotomous regions and municipalities) participated in the survey. According to the survey, the control of acute EGVB (49.3%, 412/836) and the prevention of recurrent bleeding (38.3%, 320/836) were major indications of endoscopic treatment. For primary [non-selective β-blocker (NSBB) or endoscopic therapies] and secondary prophylaxis (NSBB and endoscopic therapies) of EGVB, adherence to domestic guideline was 72.5% (606/836) and 39.2% (328/836), respectively. There were significant differences in the adherence between secondary and tertiary hospitals in primary prophylaxis of EGVB [71.0% (495/697) VS 79.9% (111/139), χ2=4.11, P=0.033] and secondary prophylaxis of EGVB [41.6% (290/697) VS 27.3% (38/139), χ2=9.31, P=0.002]. A total of 78.2% (654/836) hospitals preferred endoscopic therapies treating acute EGVB, and endoscopic therapy was more likely to be the first choice for treating acute EGVB in tertiary hospitals (82.6%, 576/697) than secondary hospitals [56.1% (78/139), χ2=46.33, P<0.001]. The optimal timing was usually within 12 hours (48.5%, 317/654) and 12-24 hours (36.9%, 241/654) after the bleeding. Regarding the management of gastroesophageal varices type 2 and isolated gastric varices type 1, most hospitals used cyanoacrylate injection in combination with sclerotherapy [48.2% (403/836) and 29.9% (250/836), respectively], but substantial proportions of hospitals preferred clip-assisted therapies [12.4% (104/836) and 26.4% (221/836), respectively]. Improving the skills of endoscopic doctors (84.2%, 704/836), and enhancing the precision of pre-procedure evaluation and quality of multidisciplinary team (78.9%, 660/836) were considered urgent needs in the development of endoscopic treatment. Conclusion:A variety of endoscopic treatments for gastroesophageal varices in portal hypertension are implemented nationwide. Participant hospitals are active to perform emergent endoscopy for acute EGVB, but are inadequate in following recommendations regarding primary and secondary prophylaxis of EGVB. Moreover, the selection of endoscopic procedures for gastric varices differs greatly among hospitals.