Purpose: The opacity of zirconia sometimes requires a veneering material; thus lithium disilicate, a veneer material with excellent strength, can be used. This study investigated the fracture resistance of zirconia–lithium disilicate (Zr-LS2) bi-layered crowns according to the design of the substructure. Materials and Methods: Five groups of posterior Zr-LS2 restorations (Zirtooth and Amber LiSi-POZ) were fabricated with different zirconia substructure coverage (control group, groups half occlusal zirconia coverage; 1/2OZ, and three-quarter occlusal zirconia coverage; 3/4OZ) and margin designs (control group, groups collar margin; C-M, and collarless margin; Cl-M). All restorations were cemented with self-adhesive resin cement followed by 24-h water storage and thermocycling (10,000 cycles, 5°C and 55°C). The fracture load was measured, and failure mode analysis, fractography, and elemental analysis were performed. The one-way analysis of variance and Fisher’s exact test were performed for statistical analyses (α=.05). Results: A significant difference was found in the fracture load of Zr-LS2 restorations according to the zirconia coverage of the occlusal area and margin design (P<.05). Group 3/4OZ was significantly larger than the control group C and 1/2OZ (P<.05). The C-M group had greater fracture loads based on margin design than the control group C and Cl-M (P<.05). Conclusion The fracture resistance of posterior Zr-LS2 restorations increased with the zirconia coverage, occlusal thickness, and collar margin.

Purpose: The opacity of zirconia sometimes requires a veneering material; thus lithium disilicate, a veneer material with excellent strength, can be used. This study investigated the fracture resistance of zirconia–lithium disilicate (Zr-LS2) bi-layered crowns according to the design of the substructure. Materials and Methods: Five groups of posterior Zr-LS2 restorations (Zirtooth and Amber LiSi-POZ) were fabricated with different zirconia substructure coverage (control group, groups half occlusal zirconia coverage; 1/2OZ, and three-quarter occlusal zirconia coverage; 3/4OZ) and margin designs (control group, groups collar margin; C-M, and collarless margin; Cl-M). All restorations were cemented with self-adhesive resin cement followed by 24-h water storage and thermocycling (10,000 cycles, 5°C and 55°C). The fracture load was measured, and failure mode analysis, fractography, and elemental analysis were performed. The one-way analysis of variance and Fisher’s exact test were performed for statistical analyses (α=.05). Results: A significant difference was found in the fracture load of Zr-LS2 restorations according to the zirconia coverage of the occlusal area and margin design (P<.05). Group 3/4OZ was significantly larger than the control group C and 1/2OZ (P<.05). The C-M group had greater fracture loads based on margin design than the control group C and Cl-M (P<.05). Conclusion The fracture resistance of posterior Zr-LS2 restorations increased with the zirconia coverage, occlusal thickness, and collar margin.

Purpose: The opacity of zirconia sometimes requires a veneering material; thus lithium disilicate, a veneer material with excellent strength, can be used. This study investigated the fracture resistance of zirconia–lithium disilicate (Zr-LS2) bi-layered crowns according to the design of the substructure. Materials and Methods: Five groups of posterior Zr-LS2 restorations (Zirtooth and Amber LiSi-POZ) were fabricated with different zirconia substructure coverage (control group, groups half occlusal zirconia coverage; 1/2OZ, and three-quarter occlusal zirconia coverage; 3/4OZ) and margin designs (control group, groups collar margin; C-M, and collarless margin; Cl-M). All restorations were cemented with self-adhesive resin cement followed by 24-h water storage and thermocycling (10,000 cycles, 5°C and 55°C). The fracture load was measured, and failure mode analysis, fractography, and elemental analysis were performed. The one-way analysis of variance and Fisher’s exact test were performed for statistical analyses (α=.05). Results: A significant difference was found in the fracture load of Zr-LS2 restorations according to the zirconia coverage of the occlusal area and margin design (P<.05). Group 3/4OZ was significantly larger than the control group C and 1/2OZ (P<.05). The C-M group had greater fracture loads based on margin design than the control group C and Cl-M (P<.05). Conclusion The fracture resistance of posterior Zr-LS2 restorations increased with the zirconia coverage, occlusal thickness, and collar margin.

Purpose: The opacity of zirconia sometimes requires a veneering material; thus lithium disilicate, a veneer material with excellent strength, can be used. This study investigated the fracture resistance of zirconia–lithium disilicate (Zr-LS2) bi-layered crowns according to the design of the substructure. Materials and Methods: Five groups of posterior Zr-LS2 restorations (Zirtooth and Amber LiSi-POZ) were fabricated with different zirconia substructure coverage (control group, groups half occlusal zirconia coverage; 1/2OZ, and three-quarter occlusal zirconia coverage; 3/4OZ) and margin designs (control group, groups collar margin; C-M, and collarless margin; Cl-M). All restorations were cemented with self-adhesive resin cement followed by 24-h water storage and thermocycling (10,000 cycles, 5°C and 55°C). The fracture load was measured, and failure mode analysis, fractography, and elemental analysis were performed. The one-way analysis of variance and Fisher’s exact test were performed for statistical analyses (α=.05). Results: A significant difference was found in the fracture load of Zr-LS2 restorations according to the zirconia coverage of the occlusal area and margin design (P<.05). Group 3/4OZ was significantly larger than the control group C and 1/2OZ (P<.05). The C-M group had greater fracture loads based on margin design than the control group C and Cl-M (P<.05). Conclusion The fracture resistance of posterior Zr-LS2 restorations increased with the zirconia coverage, occlusal thickness, and collar margin.

Background: This study aimed to investigate the erosive potential of powdered vitamin C on the bovine enamel tooth surface. Methods: The experiment included five groups: Lemona, Vitagran, Korea Eundan, Coca-Cola (positive controls), and artificialsaliva (negative controls). The pH and titratable acidity were measured. Bovine enamel specimens were immersed in the experimental solutions for 15 minutes each day for 7 days. The surface microhardness was measured using the Vickers hardness number before immersion and on the 1st, 3rd, 5th, and 7th days. The surfaces of the bovine enamel specimens were observed by scanning electron microscopy (SEM). Results: The pH of the experimental groups was as follows: Lemona (2.04±0.04) had the lowest pH, followed by Vitagran(2.56±0.01), the positive control group Coca-Cola (2.60±0.03), Korea Eundan (3.14±0.02), and the negative control group artificial saliva (7.06±0.05). Surface microhardness decreased significantly during the immersion period (p＜0.001). The largest surface microhardness reduction value was shown in Lemona (–201.22±20.60), followed by Vitagran (–190.02±14.73), Korea Eundan (–189.27±27.14), Coca-Cola (–99.28±17.21), artificial saliva (–10.99±9.94). According to the SEM findings, the experimental and positive control groups exhibited rough surfaces with micropores, whereas the negative control group exhibited smooth surfaces before specimen immersion. Conclusion Consuming powdered vitamin C at a low pH may degrade the enamel surface. To reduce the erosive effect, it isrecommended to rinse the mouth with water and brush the teeth after an hour.

Background: This study aimed to investigate the erosive potential of powdered vitamin C on the bovine enamel tooth surface. Methods: The experiment included five groups: Lemona, Vitagran, Korea Eundan, Coca-Cola (positive controls), and artificialsaliva (negative controls). The pH and titratable acidity were measured. Bovine enamel specimens were immersed in the experimental solutions for 15 minutes each day for 7 days. The surface microhardness was measured using the Vickers hardness number before immersion and on the 1st, 3rd, 5th, and 7th days. The surfaces of the bovine enamel specimens were observed by scanning electron microscopy (SEM). Results: The pH of the experimental groups was as follows: Lemona (2.04±0.04) had the lowest pH, followed by Vitagran(2.56±0.01), the positive control group Coca-Cola (2.60±0.03), Korea Eundan (3.14±0.02), and the negative control group artificial saliva (7.06±0.05). Surface microhardness decreased significantly during the immersion period (p＜0.001). The largest surface microhardness reduction value was shown in Lemona (–201.22±20.60), followed by Vitagran (–190.02±14.73), Korea Eundan (–189.27±27.14), Coca-Cola (–99.28±17.21), artificial saliva (–10.99±9.94). According to the SEM findings, the experimental and positive control groups exhibited rough surfaces with micropores, whereas the negative control group exhibited smooth surfaces before specimen immersion. Conclusion Consuming powdered vitamin C at a low pH may degrade the enamel surface. To reduce the erosive effect, it isrecommended to rinse the mouth with water and brush the teeth after an hour.

Background: This study aimed to investigate the erosive potential of powdered vitamin C on the bovine enamel tooth surface. Methods: The experiment included five groups: Lemona, Vitagran, Korea Eundan, Coca-Cola (positive controls), and artificialsaliva (negative controls). The pH and titratable acidity were measured. Bovine enamel specimens were immersed in the experimental solutions for 15 minutes each day for 7 days. The surface microhardness was measured using the Vickers hardness number before immersion and on the 1st, 3rd, 5th, and 7th days. The surfaces of the bovine enamel specimens were observed by scanning electron microscopy (SEM). Results: The pH of the experimental groups was as follows: Lemona (2.04±0.04) had the lowest pH, followed by Vitagran(2.56±0.01), the positive control group Coca-Cola (2.60±0.03), Korea Eundan (3.14±0.02), and the negative control group artificial saliva (7.06±0.05). Surface microhardness decreased significantly during the immersion period (p＜0.001). The largest surface microhardness reduction value was shown in Lemona (–201.22±20.60), followed by Vitagran (–190.02±14.73), Korea Eundan (–189.27±27.14), Coca-Cola (–99.28±17.21), artificial saliva (–10.99±9.94). According to the SEM findings, the experimental and positive control groups exhibited rough surfaces with micropores, whereas the negative control group exhibited smooth surfaces before specimen immersion. Conclusion Consuming powdered vitamin C at a low pH may degrade the enamel surface. To reduce the erosive effect, it isrecommended to rinse the mouth with water and brush the teeth after an hour.

Background: Exercise capacity is associated with lung function decline in chronicobstructive pulmonary disease (COPD) patients, but a discrepancy between exercisecapacity and airflow limitation exists. This study aimed to explore factors contributingto this discrepancy in COPD patients. Methods: Data for this prospective study were obtained from the Korean COPD SubgroupStudy. The exercise capacity and airflow limitation were assessed using the6-minute walk distance (6-MWD; m) and forced expiratory volume in 1 second (FEV1).Participants were divided into four groups: FEV1 >50%+6-MWD >350, FEV1 >50%+6-MWD ≤350, FEV1 ≤50%+6-MWD >350, and FEV1 ≤50%+6-MWD ≤350 and their clinicalcharacteristics were compared. Results: A total of 883 patients (male:female, 822:61; mean age, 68.3±7.97 years) wereenrolled. Among 591 patients with FEV1 >50%, 242 were in the 6-MWD ≤350 group, andamong 292 patients with FEV1 ≤50%, 185 were in the 6-MWD >350 group. The multipleregression analyses revealed that male sex (odds ratio [OR], 8.779; 95% confidence interval[CI], 1.539 to 50.087; p=0.014), current smoking status (OR, 0.355; 95% CI, 0.178to 0.709; p=0.003), and hemoglobin levels (OR, 1.332; 95% CI, 1.077 to 1.648; p=0.008)were significantly associated with discrepancies in exercise capacity and airflow limitationin patients with FEV1 >50%. Meanwhile, in patients with FEV1 ≤50%, diffusioncapacity of carbon monoxide (OR, 0.945; 95% CI, 0.912 to 0.979; p=0.002) was significantlyassociated with discrepancies between exercise capacity and airflow limitation. Conclusion The exercise capacity of COPD patients may be influenced by factors otherthan airflow limitation, so these aspects should be considered when assessing andtreating patients.

Background: The Global Initiative for Chronic Obstructive Lung Disease (GOLD) update 2023 proposed new definitions of chronic obstructive pulmonary disease (COPD) and COPD exacerbation. However, an agreement on the definitions has not been made, either internationally or domestically. This study aimed to reach an agreement between experts on the new definitions of COPD and COPD exacerbation in South Korea. Methods: A modified Delphi method was used to make an agreement on the definitions of COPD and COPD exacerbation proposed by the GOLD update 2023. We performed two rounds of the survey including 15 Korean experts on COPD, asthma, and tuberculosis. Results: More than two-thirds of the experts agreed on 12 of the 13 statements related to the definitions of COPD and COPD exacerbation in the two rounds of the survey. The experts agreed on the definitions of COPD and COPD exacerbation that should be revised in line with the definitions proposed by the GOLD update 2023. However, the experts showed an uncertain opinion on the statement that the definition of COPD includes patients with persistent airflow obstruction due to bronchiectasis. Conclusion Based on this Delphi survey, experts’ agreement was made on the definitions of COPD and COPD exacerbation proposed by the GOLD update 2023.

Background: Inactive or old, healed tuberculosis (TB) on chest radiograph (CR) is often found in high TB incidence countries, and to avoid unnecessary evaluation and medication, differentiation from active TB is important. This study develops a deep learning (DL) model to estimate activity in a single chest radiographic analysis. Methods: A total of 3,824 active TB CRs from 511 individuals and 2,277 inactive TB CRs from 558 individuals were retrospectively collected. A pretrained convolutional neural network was fine-tuned to classify active and inactive TB. The model was pretrained with 8,964 pneumonia and 8,525 normal cases from the National Institute of Health (NIH) dataset. During the pretraining phase, the DL model learns the following tasks: pneumonia vs. normal, pneumonia vs. active TB, and active TB vs. normal. The performance of the DL model was validated using three external datasets. Receiver operating characteristic analyses were performed to evaluate the diagnostic performance to determine active TB by DL model and radiologists. Sensitivities and specificities for determining active TB were evaluated for both the DL model and radiologists. Results: The performance of the DL model showed area under the curve (AUC) values of 0.980 in internal validation, and 0.815 and 0.887 in external validation. The AUC values for the DL model, thoracic radiologist, and general radiologist, evaluated using one of the external validation datasets, were 0.815, 0.871, and 0.811, respectively. Conclusion This DL-based algorithm showed potential as an effective diagnostic tool to identify TB activity, and could be useful for the follow-up of patients with inactive TB in high TB burden countries.