Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective To systematically evaluate the radiation impact of radioactive sources used in online elemental analyzers in cement enterprises on the surrounding environment, and to provide a scientific basis for radiation monitoring and safety management at the application sites of this type of radioactive sources. Methods A statistical analysis was conducted on 15 cement enterprises in Guangxi Province using online elemental analyzers with ²⁵²Cf as the radioactive source. On-site investigation of radiation safety management and on-site monitoring of radiation environment were performed, followed by an evaluation based on the collected data. Results Although the gamma radiation ambient dose equivalent rate and neutron ambient dose equivalent rate increased around the sites using online elemental analyzers with ²⁵²Cf as the radioactive source, they all met the requirements of the Radiological Health Protection Requirements for Instruments with Sealed Sources (GBZ 125—2009). Conclusion Under the current usage and management conditions, the application of this type of radioactive sources has controllable radiation impact on the surrounding environment, and will not pose a threat to public health and environmental safety. However, continuous strengthening of radiation safety management measures and regular radiation monitoring work are still needed to ensure the safe use of radioactive sources, further reducing potential radiation risks and providing strong guarantees for the safe application of radioactive sources in online elemental analyzers in cement enterprises.

Objective: Data on syncopal donation-related vasovagal reaction (DRVR) collected from 74 blood centers between 2020 and 2023 was statistically analyzed to provide a reference for developing preventive strategies against syncopal DRVR. Methods: Data on blood donation adverse reactions and basic information of donors from 2020 to 2023 were collected through the information management system at monitoring sentinel sites. Statistical analysis was performed on the following aspects of syncopal DRVR: characteristics of donors who experienced syncope, reported incidence, triggers, duration, presence and occurrence time of syncope-related trauma, clinical management including outpatient and inpatient treatment, and severity grading. Results: From 2020 to 2023, 45 966 donation-related adverse reactions were recorded. Of these, 1 665 (3.72%) cases were syncopal DRVR. The incidence of syncopal DRVR decreased with age, being the highest in the 18-22 age group. Incidence was significantly higher in female donors than male donors, in first-time donors than repeat donors, and in university and individual donors than group donors (all P<0.05). There was no statistically significant difference among different blood donation locations (P>0.05). The top three triggers were tension, fatigue, and needle phobia or fear of blood. Among syncopal DRVR cases, 60.36% occurred during blood collection, 87.63% lasted for less than 60 seconds, and 5.05% were accompanied by trauma. Notably, 57.14% of these traumas occurred after donor had left the blood collection site. Syncope severity was graded based on required treatment: grade 1 (fully recovered without treatment, 95.50%); grade 2 (recovered after outpatient treatment, 4.02%); and grade 3 (recovered after inpatient treatment, 0.48%). Conclusion: By analyzing the data of syncopal DRVR cases, it is possible to provide a reference for formulating blood donor safety policies.

Objective: To investigate the health-related quality of life and its influencing factors in elderly patients with metabolic syndrome (MS), so as to provide the evidence for improving health-related quality of life in older adults with chronic diseases. Methods: In 2021, elderly MS patients aged ≥60 years from four districts in Nanjing City were selected as the study subjects using a multi-stage random sampling method. Data on social demographic information, lifestyle, disease history and blood biochemical indicators were collected through questionnaire surveys, physical examination and laboratory tests. Health utility value and EuroQol Visual Analog Scale (EQ-VAS) score were assessed using the EuroQol 5-dimension 3-level questionnaire. Factors affecting health-related quality of life were identified with the Tobit regression model and multiple linear regression model. Results: A total of 3 378 elderly MS patients were included, with a median age of 67.00 (interquartile range, 7.00) years. There were 1 558 males (46.12%) and 1 820 females (53.88%). The median (interquartile range) of health utility value and EQ-VAS score were 1.00 (0.03) and 80.00 (15.00). Tobit regression and multiple linear regression analysis showed that gender (female, β=-0.034), education level (middle school, β=0.024; junior college and above, β=0.046), marital status (married, β=0.014), physical activity (sufficient, β=0.013), vegetable intake (meet standard, β=-0.009) and fruit intake (meet standard, β=0.016) were the influencing factors of health utility value. Residence (urban area, β=1.933) and alcohol consumption (yes, β=1.761) were influencing factors of EQ-VAS score. Age, cardiovascular and cerebrovascular diseases, malignant tumors and chronic respiratory diseases were the influencing factors of health utility value and EQ-VAS score. Conclusion Age, sex, marital status, residence, lifestyle and disease are mainly associatied with the health-related quality of life in elderly MS patients.

BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

ObjectiveTo analyze the data structure and standards of rehabilitation outpatient medical records, to provide data support for improving the quality of rehabilitation outpatient care and developing medical insurance payment policies. MethodsBased on the normative documents issued by the National Health Commission, Basic Standards for Medical Record Writing and Standards for Electronic Medical Record Sharing Documents, in accordance with the Quality Management Regulations for Outpatient (Emergency) Diagnosis and Treatment Information Pages (Trial), reference to the framework of the World Health Organization Family of International Classifications (WHO-FICs), the data framework and content of rehabilitation outpatient medical records were determined, and the data standards were discussed. ResultsThis study constructed a data framework for rehabilitation outpatient medical records, including four main components: patient basic information, visit process information, diagnosis and treatment information, and cost information. Three major reference classifications of WHO-FICs, International Classification of Diseases, International Classification of Functioning, Disability and Health, and International Classification of Health Interventions,were used to establish diagnostic standards and standardized terminology, as well as coding disease diagnosis, functional description, functional assessment, and rehabilitation interventions, to improve the quality of data reporting, and level of quality control in rehabilitation. ConclusionThe structuring and standardization of rehabilitation outpatient medical records are the foundation for sharing of rehabilitation data. The using of the three major classifications of WHO-FICs is valuable for the terminology and coding of disease diagnosis, functional description and assessment, and intervention in rehabilitation outpatient medical records, which is significant for sharing and interconnectivity of rehabilitation outpatient data, as well as for optimizing the quality and safety of rehabilitation medical services.

ObjectiveTo explore the standardization of inpatient rehabilitation medical record summary sheet, encompassing its structure, content and data standards, to enhance the standardization level of inpatient rehabilitation medical record summary sheet, improve data reporting quality, and provide accurate data support for medical insurance payment, hospital performance evaluation, and rehabilitation discipline evaluation. MethodsBased on the relevant specifications of the National Health Commission's Basic Norms for Medical Record Writing, Specifications for Sharing Documents of Electronic Medical Records, and Quality Management and Control Indicators for Inpatient Medical Record Summary Sheet (2016 Edition), this study analyzed the structure and content of the inpatient rehabilitation medical record summary sheet. The study systematically applied the three major reference classifications of the World Health Organization Family of International Classifications, International Classification of Diseases (ICD-10/ICD-11, ICD-9-CM-3), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), for disease diagnosis, functional description and assessment, and rehabilitation intervention, forming a standardized terminology system and coding methods. ResultsThe inpatient rehabilitation medical record summary sheet covered four major sections: inpatient information, hospitalization information, diagnosis and treatment information, and cost information. ICD-10/ICD-11 were the standards and coding tools for admission and discharge diagnoses in the inpatient rehabilitation medical record summary sheet. The three functional assessment tools recommended by ICD-11, the 36-item version of World Health Organization Disability Assessment Schedule 2.0, Brief Model Disability Survey and Generic Functioning domains, as well as ICF, were used for rehabilitation functioning assessment and the coding of outcomes. ICHI Beta-3 and ICD-9-CM-3 were used for coding surgical procedures and operations in the medical record summary sheet, and also for coding rehabilitation intervention items. ConclusionThe inpatient rehabilitation medical record summary sheet is a summary of the relevant content of the rehabilitation medical record and a tool for reporting inpatient rehabilitation data. It needs to be refined and optimized according to the characteristics of rehabilitation, with necessary data supplemented. The application of ICD-11/ICD-10, ICF and ICHI Beta-3/ICD-9-CM-3 classification standards would comprehensively promote the accuracy of inpatient diagnosis of diseases and functions. Based on ICD-11 and ICF, relevant functional assessment result data would be added, and ICHI Beta-3/ICD-9-CM-3 should be used to code rehabilitation interventions. Improving the quality of rehabilitation medical records and inpatient rehabilitation medical record summary sheet is an important part of rehabilitation quality control, and also lays an evidence-based data foundation for the analysis and application of inpatient rehabilitation medical record summary sheet.

[Objective] To assess the data characteristics of quality monitoring indicators for red blood cell (RBC) preparations, so as to provide reference for continuous improvement of blood quality. [Methods] The quality inspection data of 6 types of RBC preparations from Chongqing blood center from 2019 to 2023 were summarized. For the same indicators, the numerical range of quality indicators was monitored by comparing different types of preparations with the national standard GB18469. The loss and/or damage to RBCs caused by different preparation process were compared, and the impact of different preparation processes on the quality of RBCs was discussed. [Results] The appearance and sterility test compliance rates of the six types of RBC preparations were both 100%, while the compliance rates of other items were all ≥75%. The compliance rate of hematocrit for suspended RBCs was the lowest at 75%, with a median of 0.52, which was close to the lower limit of GB18469, while the medians of hematocrit for the other types were all at the midline level of GB18469. The Hb content for different types of RBCs was significantly higher than the corresponding requirements of GB18469 (P<0.05). The hemolysis rate at the end of storage for different types of RBCs was significantly lower than the requirements of GB18469 (P<0.05). The 1 U leukoreduction process resulted in a hemoglobin content loss of about 5% and had a significant impact on the hemolysis rate at the end of storage (P<0.05). The washing process resulted in a hemoglobin content loss of <3% and had no significant impact on the hemolysis rate at the end of storage (P>0.05). The concentration process resulted in a hemoglobin content loss of <3% and had a significant impact on the hemolysis rate at the end of storage (P<0.05). [Conclusion] The impact of different processes on RBC preparations is within a controllable range and meets the requirements of GB18469. The quality monitoring data can provide a reference for clinical blood selection, effectiveness evaluation and revision of related standards.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.