Objective: To investigate the objective characteristics of tongue manifestation in different stages of damp-heat syndrome in diabetic kidney disease (DKD). Methods: A cross-sectional study enrolled 134 patients with DKD G3-5 stages who met the diagnostic criteria for damp-heat syndrome in DKD. The patients were treated at Dongzhimen Hospital, Beijing University of Chinese Medicine, from May 2023 to January 2024. The patients were divided into three groups: DKD G3, DKD G4, and DKD G5 stage, with 53, 33, and 48 patients in each group, respectively. Clinical general data (gender, age, and body mass index) and damp-heat syndrome scores were collected from the patients. The YZAI-02 traditional Chinese medicine (TCM) AI Tongue Image Acquisition Device was used to capture tongue images from these patients. The accompanying AI Open Platform for TCM Tongue Diagnosis of the device was used to analyze and extract tongue manifestation features, including objective data on tongue color, tongue quality, coating color, and coating texture. Clinical data and objective tongue manifestation characteristics were compared among patients with DKD G3-5 based on their DKD damp-heat syndrome status. Results: No statistically significant difference in gender or body mass index was observed among the three patient groups. The DKD G3 stage group had the highest age (P<0.05). The DKD G3 stage group had a lower score for symptoms of poor appetite and anorexia(P<0.05) than the DKD G5 group. No statistically significant difference was observed in damp-heat syndrome scores among the three groups. Compared with the DKD G5 stage group, the DKD G3 stage group showed a decreased proportion of pale color at the tip and edges of the tongue (P<0.05). The DKD G4 stage group exhibited an increased proportion of crimson at the root of the tongue, a decreased proportion of thick white tongue coating at the root, a decreased proportion of pale color at the tip and edges of the tongue, an increased hue value (indicating color tone) of the tongue color in the middle, an increased brightness value (indicating color lightness) of the tongue coating color in the middle, and an increased thickness of the tongue coating (P<0.05). No statistically significant difference was observed in other tongue color proportions, color chroma values, body characteristics, coating color proportions, coating color chroma values, and coating texture characteristics among the three groups. Conclusion Tongue features differ in different stages of DKD damp-heat syndrome in multiple dimensions, enabling the inference that during the DKD G5 stage, the degree of qi and blood deficiency in the kidneys, heart, lungs, liver, gallbladder, spleen, and stomach is prominent. Dampness is more likely to accumulate in the lower jiao, particularly in the kidneys, whereas heat evil in the spleen and stomach is the most severe. These insights provide novel ideas for the clinical treatment of DKD.

Sesquiterpenes are natural terpenoids with 15 carbon atoms in the basic skeleton, which mainly exist in plant volatile oil and have important physiological and medicinal value. Cytochrome P450 (CYP450) is a kind of monooxygenase encoded by supergene family, which is one of the largest gene families in plants. It is involved in the synthesis and metabolism of terpenoids, alkaloids and other secondary metabolites. In the process of terpene biosynthesis, CYP450 participates in the post-modification stage of terpenes by introducing functional groups such as hydroxyl, carboxyl and carbonyl, which plays an important role in enriching the diversity of terpenes. The CYP450 enzymes involved in sesquiterpene synthesis and their substrate catalytic specificity mechanisms have been partially investigated. In this paper, the biosynthetic pathway of plant sesquiterpenes, the structure and classification of CYP450 enzymes were briefly introduced, and the CYP450 enzymes involved in sesquiterpene biosynthesis were summarized, in order to provide a reference for intensive study of the role of CYP450 enzymes in the synthesis of sesquiterpenoids.

ObjectiveExosomes are microvesicles which could be secreted by all cell types with diameters between 30 and 150 nm. It was widely distributed in body fluids including blood, urine, and breast milk. Exosomes are considered as potential biomarkers and drug carriers by reason of containing nucleic acids, lipids, proteins and other bioactive molecules. Milk-derived exosomes have been widely used as drug delivery carriers to treat targeted diseases with a lower cost, higher biocompatibility and lower immunogenicity. Until now, there is no research about the milk-derived exosomes phosphorylation to reveal the difference of protein phosphorylation in different species of milk. To investigate the pathways and proteins with specific functions, phosphorylated proteomic analysis of milk-derived exosomes from different species is performed, and provide new ideas for exploring diversified treatments of disease. MethodsWhey and exosomes derived from bovine, porcine and caprine milk were performed for proteomics and phosphoproteomics analysis. The relationship between milk exosome proteins from different species and signaling pathways were analyzed using bioinformatics tools. ResultsA total of 4 191 global proteins, 1 640 phosphoproteins and 4 064 phosphosites were identified from 3 species of milk-derived exosomes, and the exosome proteins and phosphoproteins from different species were significantly higher than those of whey. Meanwhile, some special pathways were enriched like Fcγ-mediated phagocytosis from bovine exosomes, pathways related with neural and immune system from caprine exosomes, positive and negative regulation of multiple activities from porcine exosomes. ConclusionIn this study, the proteomic and phosphoproteomic analyses of exosomes and whey from bovine, porcine and caprine milk were carried out to reveal the difference of composition and related signaling pathways of milk exosome from different species. These results provided powerful support for the application of exosomes from different milk sources in the field of disease treatment.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective To investigate the incidence rate,clinical characteristics,and prognosis of neonatal stroke in Shenzhen,China.Methods Led by Shenzhen Children's Hospital,the Shenzhen Neonatal Data Collaboration Network organized 21 institutions to collect 36 cases of neonatal stroke from January 2020 to December 2022.The incidence,clinical characteristics,treatment,and prognosis of neonatal stroke in Shenzhen were analyzed.Results The incidence rate of neonatal stroke in 21 hospitals from 2020 to 2022 was 1/15 137,1/6 060,and 1/7 704,respectively.Ischemic stroke accounted for 75％(27/36);boys accounted for 64％(23/36).Among the 36 neonates,31(86％)had disease onset within 3 days after birth,and 19(53％)had convulsion as the initial presentation.Cerebral MRI showed that 22 neonates(61％)had left cerebral infarction and 13(36％)had basal ganglia infarction.Magnetic resonance angiography was performed for 12 neonates,among whom 9(75％)had involvement of the middle cerebral artery.Electroencephalography was performed for 29 neonates,with sharp waves in 21 neonates(72％)and seizures in 10 neonates(34％).Symptomatic/supportive treatment varied across different hospitals.Neonatal Behavioral Neurological Assessment was performed for 12 neonates(33％,12/36),with a mean score of(32±4)points.The prognosis of 27 neonates was followed up to around 12 months of age,with 44％(12/27)of the neonates having a good prognosis.Conclusions Ischemic stroke is the main type of neonatal stroke,often with convulsions as the initial presentation,involvement of the middle cerebral artery,sharp waves on electroencephalography,and a relatively low neurodevelopment score.Symptomatic/supportive treatment is the main treatment method,and some neonates tend to have a poor prognosis.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To explore potential predictors of refractory Mycoplasma pneumoniae pneumonia (RMPP) in early stage. Methods:The prospective multicenter study was conducted in Zhejiang, China from May 1 st, 2019 to January 31 st, 2020. A total of 1 428 patients with fever >48 hours to <120 hours were studied. Their clinical data and oral pharyngeal swab samples were collected; Mycoplasma pneumoniae DNA in pharyngeal swab specimens was detected. Patients with positive Mycoplasma pneumoniae DNA results underwent a series of tests, including chest X-ray, complete blood count, C-reactive protein, lactate dehydrogenase (LDH), and procalcitonin. According to the occurrence of RMPP, the patients were divided into two groups, RMPP group and general Mycoplasma pneumoniae pneumonia (GMPP) group. Measurement data between the 2 groups were compared using Mann-Whitney U test. Logistic regression analyses were used to examine the associations between clinical data and RMPP. Receiver operating characteristic (ROC) curves were used to analyse the power of the markers for predicting RMPP. Results:A total of 1 428 patients finished the study, with 801 boys and 627 girls, aged 4.3 (2.7, 6.3) years. Mycoplasma pneumoniae DNA was positive in 534 cases (37.4%), of whom 446 cases (83.5%) were diagnosed with Mycoplasma pneumoniae pneumonia, including 251 boys and 195 girls, aged 5.2 (3.3, 6.9) years. Macrolides-resistant variation was positive in 410 cases (91.9%). Fifty-five cases were with RMPP, 391 cases with GMPP. The peak body temperature before the first visit and LDH levels in RMPP patients were higher than that in GMPP patients (39.6 (39.1, 40.0) vs. 39.2 (38.9, 39.7) ℃, 333 (279, 392) vs. 311 (259, 359) U/L, both P<0.05). Logistic regression showed the prediction probability π=exp (-29.7+0.667×Peak body temperature (℃)+0.004×LDH (U/L))/(1+exp (-29.7+0.667×Peak body temperature (℃)+0.004 × LDH (U/L))), the cut-off value to predict RMPP was 0.12, with a consensus of probability forecast of 0.89, sensitivity of 0.89, and specificity of 0.67; and the area under ROC curve was 0.682 (95% CI 0.593-0.771, P<0.01). Conclusion:In MPP patients with fever over 48 to <120 hours, a prediction probability π of RMPP can be calculated based on the peak body temperature and LDH level before the first visit, which can facilitate early identification of RMPP.

The effect of porcine SIRT5 on replication of foot and mouth disease virus type O(FMDV-O)and the underlying regulatory mechanism were investigated.Western blot and RT-qPCR analyses were employed to monitor expression of endoge-nous SIRT5 in PK-15 cells infected with FMDV-O.Three pairs of SIRT5-specific siRNAs were synthesized.Changes to SIRT5 and FMDV-O protein and transcript levels,in addition to virus copy numbers,were measured by western blot and RT-qPCR analyses.PK-15 cells were transfected with a eukaryotic SIRT5 expression plasmid.Western blot and RT-qPCR analyses were used to explore the impact of SIRT5 overexpression on FMDV-O replication.Meanwhile,RT-qPCR analysis was used to detect the effect of SIRT5 overexpression on the mRNA expression levels of type I interferon-stimulated genes induced by SeV and FMDV-O.The results showed that expression of SIRT5 was up-regulated in PK-15 cells infected with FMDV-O and siRNA interfered with SIRT5 to inhibit FMDV-O replication.SIRT5 overexpression promoted FMDV-O replication.SIRT5 over-expression decreased mRNA expression levels of interferon-stimulated genes induced by SeV and FMDV-O.These results suggest that FMDV-O infection stimulated expression of SIRT5 in PK-15 cells,while SIRT5 promoted FMDV-O rep-lication by inhibiting production of type I interferon-stimula-ted genes.These findings provide a reference to further ex-plore the mechanism underlying the ability of porcine SIRT5 to promote FMDV-O replication.

This study was aimed at examining the influence of meteorological factors on scrub typhus in Xiamen.Scrub ty-phus monitoring data and meteorological factors were collected in Xiamen from 2005 to 2023.Spearman correlation analysis and nonlinear regression were used to analyze the correlation between scrub typhus incidence and meteorological factors.The inci-dence of scrub typhus first increased and subsequently decreased in Xiamen from 2005 to 2023.The highest incidence was be-tween 2014 and 2016,and the peak incidence was from June to October.The monthly incidence of scrub typhus positively cor-related with daily minimum temperature(r=0.637,P＜0.001,daily average temperature(r=0.627,P＜0.001),daily maxi-mum temperature(r=0.612,P＜0.001),sunshine duration(r=0.405,P＜0.001),average relative humidity(r=0.346,P＜0.001),and daily rainfall(r=0.207,P=0.002),and negatively correlated with average atmospheric pressure(r=-0.549,P＜0.001),whereas no correlation was observed with the average wind speed in Xiamen.The regression equation of scrub ty-phus monthly incidence and meteorological parameters was y=-433.869-11.503x1+0.381x1 2+9.150x2-0.197x2 2+3.936 x3-0.132x3 2+0.881x4+0.035x4 2-1.048x5+0.009x5 2+0.186x6-0.023x6 2+0.421x7+6.210×10-5x8-1.051 × 10-10x8 2 in Xiamen,and the R2 was 0.473,thus indicating good model fit.Scrub typhus incidence correlated with the daily minimum av-erage temperature,average temperature,daily maximum tem-perature,sunshine duration,daily rainfall,relative humidity,and average atmospheric pressure in Xiamen.Various meteoro-logical factors had differing effects on scrub typhus.

Aim To investigate the effects of bone-forming protein BMP9 on aerobic glycolysis,migration and invasion ability in triple-negative breast cancer MDA-MB-231 cells and the underlying mechanisms.Methods The experimental group infected MDA-MB-231 cells with human BMP9 recombinant adenovirus(AdBMP9),while the control group infected cells with empty GFP adenovirus.Lactate,glucose and ATP as-say kits were used to detect glucose uptake,lactate and ATP production.The correlation between BMP9 and key glycolytic enzyme genes in pancarcinoma was ana-lyzed using GEPIA2 database.The mRNA expression levels of GLUT1,HK2,PKM2 and LDHA in MDA-MB-231 cells after overexpression of BMP9 were detec-ted by qRT-PCR.Potential targets of BMP9 inhibiting MDA-MB-231 aerobic glycolysis were analyzed in STRING database.The expression levels of HIF-1αand downstream protein were detected by Western blot.The changes of cell migration and invasion ability after different treatments were evaluated by the scratch heal-ing assay and Transwell assay.Results Compared with the control group,BMP9 down-regulated glucose uptake,lactate production,ATP level(P＜0.01),and inhibited HIF-1α and its downstream protein ex-pression in MDA-MB-231 cells.Overexpression of HIF-1α in rescue experiment reversed the inhibitory effect of BMP9 on aerobic glycolysis,migration and in-vasion of MDA-MB-231 breast cancer cells.Conclu-sion BMP9 down-regulates HIF-1α to inhibit the aer-obic glycolysis and migration and invasion ability of MDA-MB-231 breast cancer cells.