Objective To compare the benefits and drawbacks of primary patch expansion versus pericardial tube right ventricular-pulmonary artery connection in patients diagnosed with pulmonary atresia with ventricular septal defect (PA/VSD). Methods A retrospective study was conducted on patients diagnosed with PA/VSD who underwent primary right ventricular-pulmonary artery connection surgery at our center between 2010 and 2020. Patients were categorized into two groups based on the type of right ventricular-pulmonary artery connection: a pericardial tube group and a patch expansion group. Clinical data and imaging findings were compared between the two groups. Results A total of 51 patients were included in the study, comprising 31 males and 20 females, with a median age of 12.57 (4.57, 49.67) months. The pericardial tube group included 19 patients with a median age of 17.17 (7.33, 49.67) months, while the patch expansion group consisted of 32 patients with a median age of 8.58 (3.57, 52.72) months. In both groups, the diameter of pulmonary artery, McGoon index, and Nakata index significantly increased after treatment (P<0.001). However, the pericardial tube group exhibited a longer extracorporeal circulation time (P<0.001). The reoperation rate was notably high, with 74.51% of patients requiring further surgical intervention, including 26 (81.25%) patients in the patch expansion group and 12 (63.16%) patients in the pericardial tube group. No statistical differences were observed in long-term cure rates or mortality between the two groups (P＞0.005). Conclusion In patients with PA/VSD, both patch expansion and pericardial tube right ventricular-pulmonary artery connection serve as effective initial palliative treatment strategies that promote pulmonary vessel development and provide a favorable foundation for subsequent radical operations. However, compared to the pericardial tube approach, the patch expansion technique is simpler to perform and preserves some intrinsic potential for pulmonary artery development, making it the preferred procedure.

OBJECTIVE To study the chemical components， components migrating to the blood and metabolites of Sanhua decoction in rats. METHODS Male Wistar rats were divided into administration group and blank group， with 6 rats in each group. The rats in the administration group were given 13.3 g/kg of Sanhua decoction lyophilized powder solution by gavage once a day in the morning and evening， and the rats in the blank group were given an equal volume of saline by gavage once a day in the morning and evening， both for 3 consecutive days. Plasma samples were collected from the two groups of rats after the last administration. The chemical components， prototype components migrating to the blood and metabolites of Sanhua decoction were analyzed by UHPLC-Q-TOF/MS technique. The structures were identified combined with the self-built natural product high- resolution mass spectrometry database and relevant literature. RESULTS & CONCLUSIONS Totally 69 compounds were identified from the lyophilized powder of Sanhua decoction， including 29 components from Rheum officinale， 16 components from Magnoliae Officinalis Cortex， 22 components from Aurantii Fructus Immaturus， and 10 components from Notopterygii Rhizoma et Radix. Among them， 3 components （citric acid， L-tyrosine， adenosine） were present in all 4 medicinal herbs. Another component （feruloylgluconic acid） still needed to be specifically attributed. A total of 43 prototype components migrating to the blood were identified， including flavonoids， phenols， anthraquinones， phenylpropanoids， alkaloids and triterpenoids. A total of 61 metabolites were identified， predominantly consisting of flavonoids， anthraquinones and phenylpropanoids. The metabolic pathways mainly involved phase Ⅰ metabolic reactions such as demethylation and phase Ⅱ metabolic reactions like sulfation and glucuronidation.

Objective To analyze the factors related to early allograft dysfunction(EAD)after liver transplantation and to construct a predictive model.Methods A total of 375 patients who underwent liver transplantation in our hospital from December 2008 to December 2021 were collected,including 90 patients with EAD and 266 patients without EAD.Thirty items of baseline data for the 2 groups were compared and analyzed.Aftergrouping in a ratio of 7∶3,univariate and multivariate logistic regression analyses were used in the training set to evaluate the factors related to EAD and construct a nomogram.Receiver operating characteristic(ROC)curve,decision curve analysis(DCA),sensitivity,specificity,positive predictive value,negative predictive value,Kappa value and other indicators were used to evaluate the model performance.Results The incidence of EAD after liver transplantation was 24%.Multivariate logistic regression analysis showed that preoperative tumor recurrence history(OR=3.15,95%CI:1.28～7.77,P=0.013)and operation time(OR=1.22,95%CI:1.04～1.42,P=0.015)were related to the occurrence of EAD after surgery.After predicting the outcome according to the cut-off point of 0.519 identified by the Youden index,the model performance in the both training set and validation set was acceptable.DCA suggested the model has good clinical applicability.Conclusion The risk factors for EAD after liver transplantation are preoperative tumor recurrence history and operation time,and the established model has predictive effect on prognosis.

Talents are the main force for the development of traditional Chinese medicine（TCM）， and the construction of TCM talents and the reformation of talent evaluation system are essential to promote the inheritance and innovation of TCM. At present， we are still exploring and developing in the fields of the formulation， implementation and evaluation indicators of TCM talent evaluation system. However， there are shortcomings and difficulties. For instance， insufficient stratification in the evaluation， excessive emphasis on the quantity of achievements， neglecting the quality of the achievements and the actual contribution， imperfect assessment indicators， and the weak characteristics of TCM. Therefore， national ministries and commissions have jointly issued a document requesting to break the four only and set a new standard， in order to promote the construction of a scientific and technological talent evaluation system oriented by innovation value， ability and contribution. For the evaluation of TCM clinical talents， China Association for Science and Technology commissioned China Association of Chinese Medicine to build the China Clinical Cases Library of TCM（CCCL-TCM）， which aims at collecting the most authoritative and representative TCM clinical cases and exploring the advantages of applying clinical cases as masterpiece of achievement in TCM clinical talents evaluation. CCCL-TCM can promote the construction of a talent evaluation system that is more in line with the development characteristics of TCM industry， and to carry out relevant pilot in TCM colleges and institutions across the country in order to promote the reformation of TCM talent evaluation system.

This article mainly elaborated the acupuncture and moxibustion treatment scheme of"eighteen needles for reproduction"based on Professor You Zhaoling's reproductive axis theory of"heart-kidney-Chong Ren-uterus".The"eighteen needles for reproduction"aims to regulate the disordered reproductive axis in gynecological reproductive diseases.It selects the acupoints on the main viscera and meridians of the reproductive axis as the main acupoints,and the acupoints regulating the qi and blood of the related viscera as the matching acupoints.Through specific manipulation,it can regulate the qi and blood,dredge the meridians,and treat the viscera,so as to nourish the essence and help pregnancy,and provide ideas and reference for the treatment of gynecological reproductive diseases with acupuncture and moxibustion.

Ankylosing spondylitis (AS) combined with lower cervical fracture is often categorized into unstable fracture, with a high incidence of neurological injury and a high rate of disability and morbidity. As factors such as shoulder occlusion may affect the accuracy of X-ray imaging diagnosis, it is often easily misdiagnosed at the primary diagnosis. Non-operative treatment has complications such as bone nonunion and the possibility of secondary neurological damage, while the timing, access and choice of surgical treatment are still controversial. Currently, there are no clinical practice guidelines for the treatment of AS combined with lower cervical fracture with or without dislocation. To this end, the Spinal Trauma Group of Orthopedics Branch of Chinese Medical Doctor Association organized experts to formulate Clinical guidelines for the treatment of ankylosing spondylitis combined with lower cervical fracture in adults ( version 2024) in accordance with the principles of evidence-based medicine, scientificity and practicality, in which 11 recommendations were put forward in terms of the diagnosis, imaging evaluation, typing and treatment, etc, to provide guidance for the diagnosis and treatment of AS combined with lower cervical fracture.

Objective To investigate the effect of esketamine combined with erector spinae plane block(ESPB)on the quality of early postoperative recovery in patients undergoing thoracoscopic pulmonary surgery.Methods Ninety patients who underwent thoracoscopic lung surgery(thoracoscopic radical resec-tion of lung cancer,thoracoscopic lobectomy or segmentectomy)from May 2022 to July 2023 were selected,47 males and 43 females,aged 18-64 years,BMI 18-25 kg/m2,ASA physical statusⅠorⅡ.According to random number table method,the patients were divided into two groups:the ESPB group(group C)and the esketamine combined with ESPB group(group D),45 patients in each group.Patients in the two groups completed ultrasound-guided ESPB,followed by sufentanil anesthesia induction and patient-controlled intra-venous analgesia(PCIA)in group C,while esketamineanesthesia induction,maintenance,and PCIA in group D.The intraoperative dosage of anesthetics,numerical rating scale(NRS)score during activity 1 hour,6,12,24,and 48 hours after operation,the number of PCIA compressions within 24 hours after op-eration,the number of rescue analgesia after operation,the recovery time of anesthesia,the incidence of postoperative nausea and vomiting within 2 days after operation and the adverse reactions related to esket-amine were recorded.The 40-item recovery quality scale(QoR-40)score was used to evaluate the quality of recovery of patients 1 day before operation and 2 days after operation.The hospital anxiety and depression scale(HADS)was used to assess patients anxiety and depression 1 day before surgery and at discharge.Results Compared with group C,the dosage of propofol and remifentanil intraoperatively,the incidence of postoperative nausea and vomiting were decreased(P＜0.05),the QoR-40 score was increased 2 days after operation,HADS score at discharge was decreased in group D(P＜0.05).Conclusion Esketamine combined with ESPB is safe and effective for patients undergoing thoracoscopic lung surgery.The periopera-tive analgesia is perfect,the adverse reactions are few,and the quality of early recovery is high,which pro-vides a new anesthesia choice for such surgery.

Objective This study aimed to investigate the potential relationship between urinary metals copper (Cu), arsenic (As), strontium (Sr), barium (Ba), iron (Fe), lead (Pb) and manganese (Mn) and grip strength. Methods We used linear regression models, quantile g-computation and Bayesian kernel machine regression (BKMR) to assess the relationship between metals and grip strength.Results In the multimetal linear regression, Cu (β=-2.119), As (β=-1.318), Sr (β=-2.480), Ba (β=0.781), Fe (β= 1.130) and Mn (β=-0.404) were significantly correlated with grip strength (P < 0.05). The results of the quantile g-computation showed that the risk of occurrence of grip strength reduction was -1.007 (95％ confidence interval:-1.362, -0.652; P < 0.001) when each quartile of the mixture of the seven metals was increased. Bayesian kernel function regression model analysis showed that mixtures of the seven metals had a negative overall effect on grip strength, with Cu, As and Sr being negatively associated with grip strength levels. In the total population, potential interactions were observed between As and Mn and between Cu and Mn (Pinteractions of 0.003 and 0.018, respectively).Conclusion In summary, this study suggests that combined exposure to metal mixtures is negatively associated with grip strength. Cu, Sr and As were negatively correlated with grip strength levels, and there were potential interactions between As and Mn and between Cu and Mn.

Objective This study explored the potentially modifiable factors for depression and major depressive disorder (MDD) from the MR-Base database and further evaluated the associations between drug targets with MDD.Methods We analyzed two-sample of Mendelian randomization (2SMR) using genetic variant depression (n = 113,154) and MDD (n = 208,811) from Genome-Wide Association Studies (GWAS). Separate calculations were performed with modifiable risk factors from MR-Base for 1,001 genomes. The MR analysis was performed by screening drug targets with MDD in the DrugBank database to explore the therapeutic targets for MDD. Inverse variance weighted (IVW), fixed-effect inverse variance weighted (FE-IVW), MR-Egger, weighted median, and weighted mode were used for complementary calculation.Results The potential causal relationship between modifiable risk factors and depression contained 459 results for depression and 424 for MDD. Also, the associations between drug targets and MDD showed that SLC6A4, GRIN2A, GRIN2C, SCN10A, and IL1B expression are associated with an increased risk of depression. In contrast, ADRB1, CHRNA3, HTR3A, GSTP1, and GABRG2 genes are candidate protective factors against depression.Conclusion This study identified the risk factors causally associated with depression and MDD, and estimated 10 drug targets with significant impact on MDD, providing essential information for formulating strategies to prevent and treat depression.

Digital intraoral scanning is a hot topic in the field of oral digital technology.In recent years,digital intra-oral scanning has gradually become the mainstream technology in orthodontics,prosthodontics,and implant dentistry.The precision of digital intraoral scanning and the accuracy and stitching of data collection are the keys to the success of the impression.However,the operators are less familiar with the intraoral scanning characteristics,imaging process-ing,operator scanning method,oral tissue specificity of the scanned object,and restoration design.Thus far,no unified standard and consensus on digital intraoral scanning technology has been achieved at home or abroad.To deal with the problems encountered in oral scanning and improve the quality of digital scanning,we collected common expert opin-ions and sought to expound the causes of scanning errors and countermeasures by summarizing the existing evidence.We also describe the scanning strategies under different oral impression requirements.The expert consensus is that due to various factors affecting the accuracy of digital intraoral scanning and the reproducibility of scanned images,adopting the correct scanning trajectory can shorten clinical operation time and improve scanning accuracy.The scanning trajec-tories mainly include the E-shaped,segmented,and S-shaped methods.When performing fixed denture restoration,it is recommended to first scan the abutment and adjacent teeth.When performing fixed denture restoration,it is recommend-ed to scan the abutment and adjacent teeth first.Then the cavity in the abutment area is excavated.Lastly,the cavity gap was scanned after completing the abutment preparation.This method not only meets clinical needs but also achieves the most reliable accuracy.When performing full denture restoration in edentulous jaws,setting markers on the mucosal tissue at the bottom of the alveolar ridge,simultaneously capturing images of the vestibular area,using different types of scanning paths such as Z-shaped,S-shaped,buccal-palatal and palatal-buccal pathways,segmented scanning of dental arches,and other strategies can reduce scanning errors and improve image stitching and overlap.For implant restora-tion,when a single crown restoration is supported by implants and a small span upper structure restoration,it is recom-mended to first pre-scan the required dental arch.Then the cavity in the abutment area is excavated.Lastly,scanning the cavity gap after installing the implant scanning rod.When repairing a bone level implant crown,an improved indi-rect scanning method can be used.The scanning process includes three steps:First,the temporary restoration,adjacent teeth,and gingival tissue in the mouth are scanned;second,the entire dental arch is scanned after installing a standard scanning rod on the implant;and third,the temporary restoration outside the mouth is scanned to obtain the three-di-mensional shape of the gingival contour of the implant neck,thereby increasing the stability of soft tissue scanning around the implant and improving scanning restoration.For dental implant fixed bridge repair with missing teeth,the mobility of the mucosa increases the difficulty of scanning,making it difficult for scanners to distinguish scanning rods of the same shape and size,which can easily cause image stacking errors.Higher accuracy of digital implant impres-sions can be achieved by changing the geometric shape of the scanning rods to change the optical curvature radius.The consensus confirms that as the range of scanned dental arches and the number of data concatenations increases,the scanning accuracy decreases accordingly,especially when performing full mouth implant restoration impressions.The difficulty of image stitching processing can easily be increased by the presence of unstable and uneven mucosal mor-phology inside the mouth and the lack of relatively obvious and fixed reference objects,which results in insufficient ac-curacy.When designing restorations of this type,it is advisable to carefully choose digital intraoral scanning methods to obtain model data.It is not recommended to use digital impressions when there are more than five missing teeth.