ObjectiveTo explore the safety and efficacy of robot-assisted minimally invasive esophagectomy （robot-assisted minimally invasive esophagectomy， RAMIE） and thoracic laparoscopy combined with minimally invasive esophageal resection （minimal invasive esophagectomy， MIE）. MethodsThe data of 188 patients treated with Da Vinci robot assisted minimally invasive esophageal resection （RAMIE） from April 2021 to December 2022 were analyzed. In the RAMIE group， 69 patients， 49 males and 20 female， age （67.2 ± 7.2）； 119 in the MIME group， respectively， 89 males and 30 female， age （69.1 ± 7.0）. At 1 ∶ 1， including 58 patients in the RAMIE group and 58 patients in the MIE group. The t-test， Wilcoxon rank-sum test， χ² test， and so on. ResultsAfter PSM treatment， the clinical data between the two groups. There was no significant difference in operation time， postoperative tube days， and total number of lymph node dissection between the RAMIE and MIE groups （P <0.05）； the RAMIE group was better in terms of intraoperative bleeding and the MIE group， statistically significant （P <0.05）； the MIE group was better in drainage flow and lymph node dissection for three days （P <0.05）. In terms of postoperative complications， there was no statistical difference between RAMIE and MIE groups （P>0.05）. ConclusionThe recent efficacy of robot-assisted minimally invasive esophagectomy is comparable to that of thoracic laparoscopy and minimally invasive Mckeown esophagectomy； robotic-assisted minimally invasive esophagectomy can reduce intraoperative bleeding and have more advantages in left recurrent laryngeal nerve lymph node dissection.

In the past decades, significant progress has been achived in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method), phase separation method, gas foaming method, freeze-drying method, electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional(3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co-deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviewed 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage). In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

In the past decades, significant progress has been achived in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method), phase separation method, gas foaming method, freeze-drying method, electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional(3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co-deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviewed 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage). In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

In the past decades, great progress has been made in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method ) , phase separation method, gas foaming method, freeze-drying method , electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional (3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviews 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage) . In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4 D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

In the past decades, great progress has been made in cartilage regeneration. The traditional techniques for constructing tissue engineering cartilage scaffold mainly include pore agent method (or template method ) , phase separation method, gas foaming method, freeze-drying method , electrospinning method, etc. Cartilage is heterogeneous, and it is difficult for traditional scaffolds to simulate the high anisotropy of cartilage. Therefore, functional regeneration of cartilage is challenging. With the progress of three-dimensional (3D) printing technology, it is possible to prepare functional bionic scaffolds with fine structure and gradient changes through co deposition of biomaterials, cells and active biomolecules, so as to achieve functional cartilage regeneration. This article reviews 3D printing technology of cartilage tissue engineering, and the application of 3D printing technology in cartilage regeneration at different anatomical positions (articular cartilage, auricle cartilage, nasal cartilage) . In addition, the importance of preparing bionic constructs with regional structure gradient and regional composition gradient was discussed. 3D bioprinting technology, 4 D printing techniques, smart biomaterials brought hope for the construction of bionic tissues and organs.

Objective:To investigate the effect and relationship of coronary microvascular dysfunction (CMD) on cardiac mechanical indices in patients with non-obstructive coronary artery disease(NOCAD) in the resting state.Methods:This study was a single-center retrospective study. Seventy-nine NOCAD patients who hospitalized in Qilu Hospital of Shandong University from July 2017 to March 2022 were recruited. All patients underwent conventional echocardiography examination and the examination of coronary flow velocity reserved by transthoracic Doppler echocardiography (TTDE-CFVR). Based on the results of TTDE-CFVR, patients were divided into CMD group (CFVR<2.5, 32 cases) and a control group (CFVR≥2.5, 47 cases). Clinical data, routine echocardiographic parameters, regional mechanical indices including regional myocardial work index(RWI) and regional longitudinal strain(RLS), global mechanical indices including left ventricular global longitudinal strain(GLS), global longitudinal strain in the endocardial layer(GLS-endo), global longitudinal strain in the epicardial layer(GLS-epi), left ventricular global work index(GWI), global contractive work(GCW), global waste work(GWW), global work efficiency(GWE) were compared between two groups. Binary logistic regression was used to analyze the risk factors of CMD. ROC curve was used to construct a prediction model for CMD.Results:There was no significant difference in sex ratio, BMI, smoking history, diabetes, hypertension and dyslipidemia between CMD group and control group. Age was significantly higher in the CMD group than in the control group. RWI, GWI, GCW, GWE and the absolute values of RLS, GLS, GLS-endo and GLS-epi were significantly lower in the CMD group than in the control group. Logistic regression analysis showed that the decrease of absolute value of GLS was an independent risk factor for the CMD( OR=1.335, 95% CI=1.041-1.713, P=0.023). ROC curve showed that myocardial strain-related indexes had a good decrease value for the CMD. Conclusions:For patients with NOCAD, the presence of CMD is associated with the decrease of left ventricular regional and global systolic function.

Objective:To investigate the efficacy of flexion-lateral curvature-supination reduction combined with primary anterior surgery for the treatment of lower cervical dislocation with unilateral facet inter-locking.Methods:A retrospective analysis was performed in the 32 patients who had been admitted to Department of Spine Surgery, Honghui Hospital for lower cervical dislocation with unilateral facet interlocking from November 2015 to October 2018. According to their treatments, they were divided into 2 groups. In the emergency group treated by flexion-lateral curvature-supination reduction combined with primary anterior surgery, there were 13 males and 3 females, aged from 24 to 63 years. In the traction group treated by cranial traction reduction combined with secondary anterior surgery, there were 12 males and 4 females, aged from 20 to 64 years. The operation time, intraoperative blood loss, hospital stay, bone graft fusion, American Spinal Injury Association (ASIA) grade and Japanese Orthopaedic Association (JOA) score were compared between the 2 groups.Results:There was no significant difference in the preoperative general data between the 2 groups, showing they were comparable ( P<0.05). All patients were followed up from 26 to 40 months. The hospital stay for the emergency group [(7.2±1.2) d] was significantly shorter than that for the traction group[(10.9±1.2) d] ( P<0.05). There was no significant difference in the operation time, blood loss, ASIA grade or JOA score between the 2 groups ( P>0.05). All patients achieved osseous fusion of intervertebral space. Conclusion:Compared with traditional methods, flexion-lateral curvature-supination reduction combined with primay anterior surgery shows no significant difference in the recovery of neurological function but leads to a shorter hospital stay.

Motion sickness is a series of physiological responses in human being caused by abnormal movement stimulation. With the development of science and technology, a growing number of people choose to travel by high speed vehicles. Motion sickness happens more frequently. A large number of non-drug and drug intervention methods have been reported in the treatment of motion sickness. This article provides an overview on the research developments in the prevention and treatment of motion sickness in order to provide new ideas for drug research.

Abstract Campus exclusion behavior attracts much attention in the filed of school-based social exclusion research field. It threatens the normal relationship and belonging acquisition of primary and secondary school students, resulting in frustration of students needs and negative emotions and behaviors, inability to handle classmates and social relationships well, and hindering mental health development of. Evolution believes that behaviors have a certain adaptive value. From the perspective of evolutionary psychology, a preliminary interpretation of the influencing factors of exclusion in terms of language, needs and motivations, and social status has been made. Resource acquisition, hunting-gathering hypothesis, homosexual competition, etc. Provides a certain evolutionary basis. Therefore, in the intervention and prevention of rejection behaviors, creating a campus atmosphere that accepts diversity has a positive effect on the guidance of all students, and strengthening emotional and cognitive interventions also alleviates the adverse effects of rejection behaviors.

Objective To explore the correlation between EBV DNA load and peripheral immune cells (including lymphocyte supsets and natural killer cells) before treatment in patients with NPC, and analyze the influence of circulating immune cell supsets related to EBV on the prognosis of NPC patients. Methods We retrospectively analyzed the general data of 203 NPC patients without distant metastasis at the first treatment, as well as the data of peripheral blood EBV DNA and circulating immune cell supset. The ROC curve analysis was used to determine the cutoff value of each circulating immune cell supset. Kaplan-Meier method was used for survival analysis, and Cox regression model was used for multi-factor prognostic correlation analysis. Results The 3-year OS, PFS, DMFS and LRFS of EBV DNA < 400 copies/ml group and EBV DNA≥400 copies/ml group were 99.2% vs. 90.1% (P=0.001), 96.7% vs. 90.1% (P=0.028), 98.4% vs. 90.1% (P=0.005) and 98.4% vs. 100% (P > 0.05), respectively. EBV DNA is negatively correlated with the ratio of CD19⁺ B cells before treatment (r=-0.138, P=0.040), and there was no significant correlation between EBV DNA and other circulating immune supgroups (P > 0.05). ROC analysis showed that the cut-off value of CD19⁺B cell ratio before treatment related to the 3-year OS was 8.33% (P=0.02). The 3-year OS, PFS, DMFS and LRFS of patients with CD19⁺B cells ratio ≤8.33% and CD19⁺B cells ratio > 8.33% were respectively 90.4% vs. 99.2% (P=0.003), 89.2% vs. 97.5% (P=0.008), 90.4% vs. 98.3% (P=0.008) and 98.8% vs. 99.2% (P > 0.05). However, ROC analysis showed that there was no significant correlation between OS and other peripheral immune cells (including the proportion of CD3⁺T, CD3⁺CD4⁺T, CD3⁺CD8⁺T and CD56⁺NK cells and CD4⁺/CD8⁺ ratio). Multivariate analysis showed that EBV DNA load was an independent prognostic factor of 3-year PFS of NPC patients, and the ratio of CD19⁺B cells was an independent prognostic factor of 3-year PFS, MFS and OS of NPC patients. Conclusion Before treatment, there is a negative correlation between plasma EBV DNA and the proportion of CD19⁺B cells in peripheral blood. Both can be used as the predictors of 3-year OS, PFS and DMFS of NPC patients.