Occipitocervical fusion (OCF) is used to treat the instability of the cranio-cervical junction due to various reasons (such as trauma, rheumatoid arthritis, infection, tumor, congenital malformations and degeneration). A satisfactory fusion rate can be obtained and the stability of the occipital neck can be reconstructed by OCF. Dysphagia is one of the most common complications after OCF, which seriously affects the quality of life of patients after surgery. This article mainly focuses on the evaluation and prediction methods of dysphagia after OCF, and summarizes related research in the past 16 years, and provides guidance and direction for how to predict the occurrence of dysphagia during OCF and the evaluation of postoperative dysphagia. The evaluation of dysphagia is mainly conducted using the Bazaz dysphagia score, swallowing quality of life scale (SWAL-QOL) and eating assessment tool-10 (EAT-10) score. However, the clinical prediction of dysphagia is mainly based on the changes of cervical curvature parameters (O-C 2 angle, O-EA angle, Oc-Ax angle, PI angle). At present, there are many methods for clinical evaluation and prediction of dysphagia, but the best evaluation method is still uncertain. We reviews the evaluation and prediction methods of postoperative dysphagia of OCF, showing that the Bazaz dysphagia score, SWAL-QOL score and EAT-10 score scale are suitable for evaluating postoperative dysphagia of OCF. During OCF operation, adjustment of O-C 2 Angle >-5°, O-EA Angle >100°, Oc-Ax Angle >65°, and increase of postoperative PI Angle from preoperative PI Angle (that is, dPI Angle) ≥0° can reduce the probability of dysphagia to a certain extent.

Objective:To evaluate the preliminary clinical application of our self-designed posterior reduction forceps for atlantoaxial dislocation in the reduction and fixation of irreducible atlantoaxial dislocation with simple posterior screw-rod system.Methods:Our posterior reduction forceps was self-designed and developed to assist simple posterior screw-rod system in the treatment of irreducible atlantoaxial dislocation based on the posterior atlantoaxial screw-rod system. A retrospective study was conducted to analyze the clinical data of 5 patients with irreducible atlantoaxial dislocation who had been treated from January 2021 to October 2022 at Department of Spine Surgery, General Hospital of Southern Theatre Command of PLA with our self-designed posterior reduction forceps. There were 2 males and 3 females, aged 53, 62, 45, 32 and 48 years, respectively. Diagnosis: 1 case of free odontoid process combined with atlantoaxial dislocation, 2 cases of atlantoaxial dislocation, and 2 cases of old odontoid process fracture combined with atlantoaxial dislocation. Respectively, their preoperative Japanese Orthopaedic Association (JOA) scores were 9, 11, 12, 13 and 10 points and their atlanto-dental intervals (ADI) 9.8, 7.4, 6.6, 6.4 and 8.5 mm. Postoperatively, atlantoaxial reduction and spinal cord compression were evaluated by X-ray, CT, and MRI examinations, and internal fixation, atlanto-axial sequence, and bone graft fusion by X-ray and CT examinations. One week after surgery, the JOA scores were used to evaluate the patients' neurological function and the ADI was measured to evaluate the atlantoaxial reduction.Results:The surgery was successfully performed in the 5 patients, with no intraoperative complications like neurovascular injuries to the spinal cord. The postoperative atlantoaxial reduction was satisfactory, the position of internal fixation was good, the compression to the spinal cord was relieved, and the clinical symptoms were significantly improved. At 1 week after surgery, respectively, the JOA score: 13, 14, 14, 15 and 13; the ADI: 2.6, 2.1, 1.8, 1.5 and 2.2 mm; the follow-up time: 3, 6, 12, 9 and 6 months; the bone fusion time: 3, 3, 6, 6 and 3 months. Follow-ups revealed no loosening or fracture of internal fixation, good atlanto-axial sequence, and no recurrence of dislocation.Conclusion:Our self-designed posterior reduction forceps for atlantoaxial dislocation can assist the simple posterior screw-rod system to treat irreducible atlantoaxial dislocation, leading to good preliminary clinical outcomes.

The acute combination fractures of the atlas and axis in adults have a higher rate of neurological injury and early death compared with atlas or axial fractures alone. Currently, the diagnosis and treatment choices of acute combination fractures of the atlas and axis in adults are controversial because of the lack of standards for implementation. Non-operative treatments have a high incidence of bone nonunion and complications, while surgeries may easily lead to the injury of the vertebral artery, spinal cord and nerve root. At present, there are no evidence-based Chinese guidelines for the diagnosis and treatment of acute combination fractures of the atlas and axis in adults. To provide orthopedic surgeons with the most up-to-date and effective information in treating acute combination fractures of the atlas and axis in adults, the Spinal Trauma Group of Orthopedic Branch of Chinese Medical Doctor Association organized experts in the field of spinal trauma to develop the Evidence-based guideline for clinical diagnosis and treatment of acute combination fractures of the atlas and axis in adults ( version 2023) by referring to the "Management of acute combination fractures of the atlas and axis in adults" published by American Association of Neurological Surgeons (AANS)/Congress of Neurological Surgeons (CNS) in 2013 and the relevant Chinese and English literatures. Ten recommendations were made concerning the radiological diagnosis, stability judgment, treatment rules, treatment options and complications based on medical evidence, aiming to provide a reference for the diagnosis and treatment of acute combination fractures of the atlas and axis in adults.

Objective:To subdivide clinical classification of refractory atlantoaxial dislocation, and evaluate the reliability of new subdivide clinical classification of refractory atlantoaxial dislocation.Methods:From January 2010 to December 2018, 48 patients with refractory atlantoaxial dislocation were treated, including 19 males and 29 females, aged 16 to 65 years, with an average of 39.2±13.3 years. According to the changes of relative anatomical position of C 1 and C 2 under general anesthesia with heavy traction of 1/6 body weight, subdivide clinical classification of refractory atlantoaxial dislocation were proposed, and refractory atlantoaxial dislocation was divided into traction loosening type (atlantoaxial angle≥5°) and traction stabilization type (atlantoaxial angle<5°). The traction loosening type was directly reduced by posterior atlantoaxial screw-rod fixation and fusion without anterior or posterior soft tissue release. For traction stabilization type, transoral soft tissue release was performed first, and then transoral anterior reduction plate fixation and fusion or posterior atlantoaxial screw-rod fixation and fusion were performed. Atlantodental interval (ADI) and atlantoaxial angle (AAA) were measured and collected before and after surgery to evaluate atlantoaxial reduction. The space available for the spinal cord (SAC) were measured to evaluate spinal cord compression. Visual analogue score (VAS) was used to evaluate the neck pain levels, and Japanese Orthopaedic Association (JOA) scores was used to evaluate the neurological function. American Spinal Cord Injury Association impairment scale (AIS) was used to evaluate the degree of spinal cord injury. One week, 3, 6, 12 months postoperatively and the annual review of the X-ray and CT scan were checked, in order to evaluate the reduction, internal fixation and bone graft fusion. Results:Among all 48 cases, 22 cases were traction loosening type, of which posterior atlantoaxial screw-rod fixation and fusion were performed in 16 cases and occipitocervical fixation and fusion in 6 cases. 26 cases were traction stabilization type, and they all underwent anterior transoral release, and then, anterior TARP fixation and fusion were performed in 24 cases and posterior screw-rod fixation and fusion in the other 2 cases. X-ray, CT and MRI images and of all patients 1 week after surgery showed good atlantoaxial reduction and decompression of spinal cord. In each of the two types, there was one case lost to follow-up. For 46 cases in follow-up, the follow-up time ranged from 6 to 72 months, with an average of 38.0±17.2 months. Among 46 cases, 21 cases of traction loosening type showed that, ADI reduced from preoperative 9.9±2.2 mm to 2.3±0.9 mm at 3 months after surgery and 2.3±1.0 mm at the last follow-up, AAA increased from preoperative 57.9°±12.3° to 91.0°±2.2° at 3 months after surgery and 90.9°±2.2° at the last follow-up, SAC increased from preoperative 9.8±1.3 mm to 15.1±0.7 mm at 3 months after surgery and 14.9±0.7 mm at the last follow-up, VAS score reduced from preoperative 1.5±2.1 to 0.7±1.0 at 3 months after surgery and 0.3±0.6 at the last follow-up, and JOA score increased from preoperative 10.2±1.7 to 13.3±1.3 at 3 months after surgery and 14.9±1.5 at the last follow-up. Twenty-five cases of traction stabilization type presented that, ADI reduced from preoperative 9.7±2.0 mm to 2.1±1.4 mm at 3 months after surgery and 2.1±1.3 mm at the last follow-up, AAA increased from preoperative 55.8°±9.2° to 90.9°±1.4° at 3 months after surgery and 90.9°±1.3° at the last follow-up, SAC increased from preoperative 10.5±1.0 mm to 15.4±0.5 mm at 3 months after surgery and 14.8±2.8 mm at the last follow-up, VAS score reduced from preoperative 1.7±2.1 to 0.7±0.9 at 3 months after surgery and 0.3±0.5 at the last follow-up, and JOA score increased from preoperative 10.1±1.3 to 12.9±1.5 at 3 months after surgery and 14.4±1.3 at the last follow-up. In the traction loosening type, all the 10 grade D patients were improved to grade E at the last follow-up. In the 2 grade C patients of traction stabilization type before surgery, 1 patient was improved to grade E, 1 patient was improved to grade D, and all 11 patients with grade D were improved to grade E at the last follow-up. Bony fusion was obtained in all patients from 3 to 6 months, with an average of 4.4±1.5 months. During follow-up period, no looseness of internal fixation or redislocation happened.Conclusion:Refractory atlantoaxial dislocation can be divided into traction loosening type and traction stabilization type. For traction loosening type, satisfactory reduction can be achieved by using posterior atlantoaxial screw-rod system without soft tissue release. For traction stabilization type, anterior release is preferable, and then anterior TARP or posterior screw-rod can be used to achieve satisfactory reduction.

Alkalies/therapeutic use* ; Burns, Chemical/drug therapy* ; Corneal Injuries/drug therapy* ; Eye Burns/drug therapy* ; Humans ; Taurine

Objective:To investigate the normal reference values of spinal bone mineral density measured by quantitative computed tomography (QCT) and the differences of bone mineral density (BMD) in different regions of in Chinese adult males.Methods:Men who underwent low-dose CT lung scan for cancer screening in regions of Northeast, North, East, South, Central and Southwest of China from January 2018 to December 2019 were selected. And the lumbar vertebrae BMD values in the male subjects were measured by the QCT system (Mindways Software, Inc.). The mean BMD values and their decline rates were calculated at an age interval of 10 years, and the prevalence of osteoporosis was calculated according to the American College of Radiology spine QCT osteoporosis diagnostic criteria.Results:A total of 50 682 males with a mean age of (50.22±12.79) years (ranged 20 to 98 years) were included in this study. The peak BMD of (173.11±28.56) mg/cm 3 in the healthy Chinese adult male population appeared in the age group of 20 to 29 years and then declined with age. Before the age of 70 years, the BMD was relatively higher in males in South China, and it was lower in Central China and Southwest China, and it was intermediate in Northeast, North and East of China, with statistically significant differences. There was no significant differences in BMD in the males in the two age groups of 70 to 79 years and 80 and older among the regions in China. The overall decline rate of spinal BMD in Chinese males under QCT was about 46.92% over the lifetime, and it declined obviouslyin the 40-49 age group. The overall prevalence of osteoporosis in Chinese male population aged 50 years and above was approximately 11.42%, with the highest prevalence in Southwest China and Central China (14.72% and 13.87%, respectively) and the lowest in North China and South China (8.53% and 7.71%, respectively). Conclusions:A reference of lumbar spine BMD values for healthy males in China based on QCT is established. BMD values were highest in South China and Lowest in Central China.

Objective:To establish the normal reference value of lumbar bone mineral density (BMD) under quantitative CT (QCT) in Chinese healthy adult females and to explore the regional differences.Methods:Total of 35 431 healthy women who met the inclusion criteria of Chinese health quantitative CT big data program were selected in this study. The BMD of the central plane of L 1 and L 2 vertebrae was measured by Mindways′s QCT system, and the mean value was taken. One-way analysis of variance was used to compare the BMD differences of lumbar vertebrae in women of different ages and regions. The subjects were grouped by an age interval of 10 years, and the level of BMD in different regions of the same age group were compaired. Results:The peak BMD of Chinese healthy adult women appeared in the age group of 20-29 years (Northeast China(183.01±24.58) mg/cm 3, North China (188.93±24.80) mg/cm 3, East China (187.54±27.71) mg/cm 3, South China (186.22±33.72) mg/cm 3, Central China (176.33±24.91) mg/cm 3, Southwest China(182.25±28.00) mg/cm 3), and then it decreased with age. The level of BMD in different regions decreased with the age. Before the age of 70 years, BMD in Central and Southwest China was always at a low level((176.23±24.91) to (90.38±28.12) mg/cm 3, 182.25±28.00 to (88.55±25.68) mg/cm 3), lower than those in Northeast China ((183.01±24.58) to (99.69±27.85) mg/cm 3), North China ((188.93±24.80) to (95.89±26.12) mg/cm 3), East China ((187.54±27.71) to (95.65±27.86) mg/cm 3). After 70 years of age, BMD tended to be the same in different regions ( P>0.05). The BMD values in Central China and Southwest China were similar in the age group of 40-60 years ( P>0.05). The BMD values in the health adult femles in the age group of 60 years in different regions of Chinawere all lower than those of bone mass abnormality (all P<0.05). The detection rate of osteoporosis in females over 50 years was the highest in Southwest China (25.65%) and it was the lowest in North China (17.30%). Conclusions:This study establishes reference values of BMD under QCT in healthy Chinese women, which can be used as a reference basis for identifying women with low BMD who are at risk of osteoporosis. The BMD value is the lowest in Southwest China and the highest in South China.

Objective:To use quantitative computed tomography (QCT) technology to measure the bone mineral density of the spine of the Chinese healthy population, and to explore its correlation with hemoglobin and serum albumin.Methods:The data in this study came from the China Health Quantitative CT Big Data Project (China Biobank). The spine bone density was measured by using QCT Pro Image Analysis System and all cooperating centers used the European spine phantom (NO.145) for quality control. Total of 50 053 healthy persons who met the criteria for entry were selected as the research subjects. The subjects were divided into 7 groups according to age. The general data, spine bone density, serum albumin, hemoglobin of the subjects were collected. The single-factor analysis of variance, Pearson correlation analysis and multi-classification logistic regression model were applied to analyze the correlation between bone density and hemoglobin and serum albumin.Results:The bone mineral density of healthy people decreased with age ( P<0.05), and there were significant differences in hemoglobin, serum albumin and body mass index (BMI) among different age groups (all P<0.05). Linear correlation analysis showed that there were positive correlation between bone mineral density and hemoglobin in healthy males in different age groups ( r=0.086, 0.101, 0.076, 0.090, 0.072, 0.123, 0.100, all P<0.01). There were negative correlation between bone mineral density and hemoglobin in certain age groups in women (40-49 years group: r=-0.027; 70-79 yearsgroup: r=-0.077; both P<0.05). And corelation were found between bone mineral density and serum levels of albumin in certain age groups of healthy subjects (among men, 30-39 years group: r=-0.048; 40-49 years group, r=-0.027; 70-79 years group, r=-0.051; among women, 30-39 years group: r=-0.044; 40-49 years group, r=-0.042; 50-59 years group, r=-0.086; 70-79 years group, r=-0.070; all P<0.05). After adjusting for age and BMI, the multi-category logistic regression analysis showed that the hemoglobin level was protective factor of normal bone density ( OR=1.022, 95% CI:1.017-1.027) and decreased bone density ( OR=1.012, 95% CI:1.007-1.016) in healthy males, and the serum albumin was risk factor for normal bone density ( OR=0.926, 95% CI:0.905-0.948) and decreased bone density ( OR=1.006, 95% CI:0.951-1.011) in healthy women. Conclusion:There is a correlation between bone mineral density and hemoglobin and serum albumin in Chinese healthy population. Hemoglobin is a protective factor for bone mineral density in men, and serum albumin is a risk factor for bone mineral densityin women.

ObjectiveTo establish the determination for index components in benchmark samples of Erdongtang， and clarify the content and transfer rate rages of index components in 15 batches of benchmark samples， and to explore the quantity transfer of index components of decoction pieces to benchmark samples. MethodFifteen batches of benchmark samples were prepared， the contents of mangiferin， baicalin and glycyrrhizic acid were determined by high performance liquid chromatography （HPLC）-diode array detector （DAD）， the mobile phase was acetonitrile （A）-0.1% formic acid aqueous solution （B） for gradient elution （0-10 min， 10%-17%A； 10-25 min， 17%-19%A； 25-28 min， 19%-25%A； 28-45 min， 25%-33%A； 45-46 min， 33%-45%A； 46-60 min， 45%-55%A）， detection wavelength was set at 254 nm. Contents of timosaponin BⅡ and the sum of protoneodioscin and protodioscin were determined by HPLC-evaporative light scattering detector （ELSD）， the mobile phase was acetonitrile （A）-water （B） for gradient elution （0-20 min， 24%A； 20-25 min， 24%-27%A； 25-33 min， 27%-28%A； 33-36 min， 28%-90%A； 36-41 min， 90%-24%A）. ResultThe methodological verification of the established method was good， which could be used for determination of five index components in benchmark samples. The content ranges of mangiferin， baicalin， glycyrrhizic acid， timosaponin BⅡ， and the sum of protoneodioscin and protodioscin in 15 batches of benchmark samples of Erdongtang were 0.14%-0.23%， 2.40%-3.37%， 0.07%-0.44%， 0.43%-0.95%， and 0.15%-0.47%， the transfer rate ranges of them were 33.90%-52.15%， 84.46%-105.61%， 22.59%-93.86%， 38.07%-61.43%， and 53.28%-96.11%， respectively. ConclusionThe consistencies of transfer rate of mangiferin， baicalin， timosaponin BⅡ and the sum of protoneodioscin and protodioscin （except glycyrrhizic acid） between decoction pieces and benchmark samples of Erdongtang are good， indicates that the transfer rates of 4 index components are stable during the preparation process of benchmark samples， which can provide data support for research and development of the compound preparation of this formula.

Objective:To compare Jefferson-fracture reduction plate (JeRP) and micro titanium plate in the transoral single-segment fixation of unstable atlas fractures.Methods:From January 2008 to December 2020, 45 patients with unstable atlas fracture were treated by single-segment fixation through an oral approach with a JeRP or a micro titanium plate at Department of Orthopedic Surgery, General Hospital of Southern Theatre Command. They were 24 males and 21 females, aged from 15 to 67 years. By the Gehweiler classification, 11 atlas fractures were type Ⅰ and 34 type Ⅲ; by the American Spinal Injury Association (ASIA) classification, the spinal cord injury was grade D in 7 cases and grade E in 38 cases; by the Dickman classification, the atlas transverse ligament injury was type Ⅰ in 4 cases and type Ⅱ in 11 cases. Of the patients, 26 were treated by transoral single-segment fixation with a JeRP and 19 by transoral single-segment fixation with a micro titanium plate. The 2 groups were compared in terms of baseline data, operation time, blood loss, hospital stay, visual analog scale (VAS) for neck pain and atlas lateral mass displacement (LMD) before operation and at the last follow-up, and intraoperative and postoperative complications.Results:The 2 groups were comparable because there was no significant difference between them in the preoperative general data ( P>0.05). All patients were followed up for 12 to 55 months (mean, 21.8 months). Wound dehiscence or infection was observed in none of the patients after operation. About 12 months after operation, all fractures achieved bony union, neck pain basically disappeared, and neck movement had no obvious limitation. The hospital stay was (13.9±2.2) d for the JeRP group and (14.2±2.9) d for the micro titanium plate group, showing no significant difference between the 2 groups ( P>0.05). The operation time was (203.5±173.4) min and the blood loss (167.3±138.6) mL in the JeRP group, significantly more than those in the micro titanium plate group [(121.5±50.5) min and (98.4±57.2) mL] ( P<0.05). In the JeRP group, the preoperative LMD was (6.7±1.7) mm and the preoperative VAS score (6.8±1.0) points, significantly higher than the last follow-up values [(0.7±0.6) mm and (0.7±0.6) points] ( P<0.05). In the micro titanium plate group, the preoperative LMD was (6.6±1.5) mm and the preoperative VAS score (6.7±0.9) points, significantly higher than the last follow-up values [(0.9±0.6) mm and (0.8±0.7) points] ( P<0.05). However, there was no significant difference in the preoperative or the last follow-up comparison between the 2 groups ( P>0.05). Implant loosening was observed in one patient in the JeRP group while foreign body sensation in the throat was reported in one patient after operation in the micro titanium plate group. Conclusions:Both JeRP and micro titanium plate in the transoral single-segment fixation can lead to effective treatment of unstable atlas fractures. Compared with JeRP, the micro titanium plate can effectively shorten operation time and reduce blood loss due to its smaller size and lower incision.