Purpose: Cognitive behavioral therapy (CBT) has long been recognized as an effective treatment for depression and suicidality.Virtual reality (VR) technology is widely used for cognitive training for conditions such as anxiety disorder and post-traumatic stress disorder, but little research has considered VR-based CBT for depressive symptoms and suicidality. We tested the effectiveness and safety of a VR-based CBT program for depressive disorders. Materials and Methods: We recruited 57 participants from May 2022 through February 2023 using online advertisements. This multi-center, assessor-blinded, randomized, controlled exploratory trial used two groups: VR treatment group and treat as usual (TAU) group. VR treatment group received a VR mental health training/education program. TAU group received standard pharmacotherapy. Assessments were conducted at baseline, immediately after the 6-week treatment period, and 4 weeks after the end of the treatment period in each group. Results: Depression scores decreased significantly over time in both VR treatment and TAU groups, with no differences between the two groups. The suicidality score decreased significantly only in VR group. No group differences were found in the remission or response rate for depression, perceived stress, or clinical severity. No adverse events or motion sickness occurred during the VR treatment program. Conclusion VR CBT treatment for major depressive disorder has the potential to be equivalent to the gold-standard pharmacotherapy in reducing depressive symptoms, suicidality, and related clinical symptoms, with no difference in improvement found in this study. Thus, VR-based CBT might be an effective alternative to pharmacotherapy for depressive disorders.

Background and Objectives: Outcomes of deferring percutaneous coronary intervention (PCI) without invasive physiologic assessment for intermediate coronary lesions is uncertain.We sought to compare long-term outcomes between medical treatment and PCI of intermediate lesions without invasive physiologic assessment. Methods: A total of 899 patients with intermediate coronary lesions between 50% and 70% diameter-stenosis were randomized to the conservative group (n=449) or the aggressive group (n=450). For intermediate lesions, PCI was performed in the aggressive group, but was deferred in the conservative group. The primary endpoint was major adverse cardiac events (MACE, a composite of all-cause death, myocardial infarction [MI], or ischemia-driven any revascularization) at 3 years. Results: The number of treated lesions per patient was 0.8±0.9 in the conservative group and 1.7±0.9 in the aggressive group (p=0.001). At 3 years, the conservative group had a significantly higher incidence of MACE than the aggressive group (13.8% vs. 9.3%; hazard ratio [HR], 1.49; 95% confidence interval [CI], 1.00–2.21; p=0.049), mainly driven by revascularization of target intermediate lesion (6.5% vs. 1.1%; HR, 5.69; 95% CI, 2.20–14.73;p<0.001). Between 1 and 3 years after the index procedure, compared to the aggressive group, the conservative group had significantly higher incidence of cardiac death or MI (3.2% vs.0.7%; HR, 4.34; 95% CI, 1.24–15.22; p=0.022) and ischemia-driven any revascularization. Conclusions For intermediate lesions, medical therapy alone, guided only by angiography, was associated with a higher risk of MACE at 3 years compared with performing PCI, mainly due to increased revascularization.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: The removal of a well-fixed acetabular cup is a challenging, labor-intensive, and time-consuming step during revision hip arthroplasty. Although the advent of the manual osteotome, Explant, has simplified the procedure, it is still a stressful process as it dissipates the surgeon’s strength and time and risks an iatrogenic pelvic fracture. Recently, EZX, a powered tool for extraction of well-fixed acetabular cups with semicircular blade was invented. This study aimed to compare Explant and EZX in an experimental condition for their efficacy and safety. Methods: Cementless acetabular cups were press-fitted to 20 hemipelvic polyurethane models using foam adhesives. Ten cups were removed with each tool for comparison of the elapsed time, loads on the entire hemipelvis, periacetabular strain and temperature, volume of periacetabular bone removed, and diameter of the remaining acetabular rim. Strains and loads were quantitatively assessed using strain gauges and load cells for precise and reliable measurements. Results: The mean duration required to remove a well-fixed cup with EZX was 38.5 seconds (range, 25–55), whereas that with Explant was 543.7 seconds (range, 214–1,051) (p < 0.001). The load on the entire hemipelvis with EZX (mean, 9.1 kgf; range, 6.4–11.3) was 33% lower than that with Explant (mean, 13.6 kgf; range, 9.2–17.1) (p < 0.001). The periacetabular peak strains at the 3 positions with EZX were significantly lower than those with Explant (p < 0.001). The temperature during the removal did not differ significantly between the 2 tools. Although the mean volume of bone loss with Explant was 2.4 mL more than that with EZX (p < 0.001), the mean diameters of the remaining acetabular rim were not significantly different, measuring 54.1 mm with both tools. Conclusions The present experiment revealed that a well-fixed cup could be removed using a powered tool with less strength and time and less load on the entire pelvis. Although the powered tool removed a larger volume of bone, the diameters of the remaining acetabular rims were equivalent. This tool may help surgeons remove well-fixed cups in a short time and reduce the deforming load on the bone around the cup without increasing the size of the subsequent reconstruction cup.

Atopic dermatitis is the most common chronic inflammatory skin disease in children and adolescents. The Korean Academy of Pediatric Allergy and Respiratory Disease published the Atopic Dermatitis Treatment Guideline in 2008, which has been helpful in atopic dermatitis treatment until now. Various reports on the development and effectiveness of new drugs have suggested that there is a need to develop and revise old treatment guidelines. Part 1 aimed to provide evidence-based recommendations for skin care management and topical treatment for atopic dermatitis. Part 2 focuses on systemic treatment, novel therapeutics, and adjuvant therapy. The goal of this guideline is intended to assist front-line doctors treating pediatric and adolescent atopic dermatitis patients make safer, more effective, and more rational decisions regarding systemic treatment, novel therapeutics, and adjuvant therapy by providing evidence-based recommendations with a clear level of evidence and benefit regarding treatment.

Purpose: Cognitive behavioral therapy (CBT) has long been recognized as an effective treatment for depression and suicidality.Virtual reality (VR) technology is widely used for cognitive training for conditions such as anxiety disorder and post-traumatic stress disorder, but little research has considered VR-based CBT for depressive symptoms and suicidality. We tested the effectiveness and safety of a VR-based CBT program for depressive disorders. Materials and Methods: We recruited 57 participants from May 2022 through February 2023 using online advertisements. This multi-center, assessor-blinded, randomized, controlled exploratory trial used two groups: VR treatment group and treat as usual (TAU) group. VR treatment group received a VR mental health training/education program. TAU group received standard pharmacotherapy. Assessments were conducted at baseline, immediately after the 6-week treatment period, and 4 weeks after the end of the treatment period in each group. Results: Depression scores decreased significantly over time in both VR treatment and TAU groups, with no differences between the two groups. The suicidality score decreased significantly only in VR group. No group differences were found in the remission or response rate for depression, perceived stress, or clinical severity. No adverse events or motion sickness occurred during the VR treatment program. Conclusion VR CBT treatment for major depressive disorder has the potential to be equivalent to the gold-standard pharmacotherapy in reducing depressive symptoms, suicidality, and related clinical symptoms, with no difference in improvement found in this study. Thus, VR-based CBT might be an effective alternative to pharmacotherapy for depressive disorders.

Purpose: Cognitive behavioral therapy (CBT) has long been recognized as an effective treatment for depression and suicidality.Virtual reality (VR) technology is widely used for cognitive training for conditions such as anxiety disorder and post-traumatic stress disorder, but little research has considered VR-based CBT for depressive symptoms and suicidality. We tested the effectiveness and safety of a VR-based CBT program for depressive disorders. Materials and Methods: We recruited 57 participants from May 2022 through February 2023 using online advertisements. This multi-center, assessor-blinded, randomized, controlled exploratory trial used two groups: VR treatment group and treat as usual (TAU) group. VR treatment group received a VR mental health training/education program. TAU group received standard pharmacotherapy. Assessments were conducted at baseline, immediately after the 6-week treatment period, and 4 weeks after the end of the treatment period in each group. Results: Depression scores decreased significantly over time in both VR treatment and TAU groups, with no differences between the two groups. The suicidality score decreased significantly only in VR group. No group differences were found in the remission or response rate for depression, perceived stress, or clinical severity. No adverse events or motion sickness occurred during the VR treatment program. Conclusion VR CBT treatment for major depressive disorder has the potential to be equivalent to the gold-standard pharmacotherapy in reducing depressive symptoms, suicidality, and related clinical symptoms, with no difference in improvement found in this study. Thus, VR-based CBT might be an effective alternative to pharmacotherapy for depressive disorders.

Background and Objectives: Outcomes of deferring percutaneous coronary intervention (PCI) without invasive physiologic assessment for intermediate coronary lesions is uncertain.We sought to compare long-term outcomes between medical treatment and PCI of intermediate lesions without invasive physiologic assessment. Methods: A total of 899 patients with intermediate coronary lesions between 50% and 70% diameter-stenosis were randomized to the conservative group (n=449) or the aggressive group (n=450). For intermediate lesions, PCI was performed in the aggressive group, but was deferred in the conservative group. The primary endpoint was major adverse cardiac events (MACE, a composite of all-cause death, myocardial infarction [MI], or ischemia-driven any revascularization) at 3 years. Results: The number of treated lesions per patient was 0.8±0.9 in the conservative group and 1.7±0.9 in the aggressive group (p=0.001). At 3 years, the conservative group had a significantly higher incidence of MACE than the aggressive group (13.8% vs. 9.3%; hazard ratio [HR], 1.49; 95% confidence interval [CI], 1.00–2.21; p=0.049), mainly driven by revascularization of target intermediate lesion (6.5% vs. 1.1%; HR, 5.69; 95% CI, 2.20–14.73;p<0.001). Between 1 and 3 years after the index procedure, compared to the aggressive group, the conservative group had significantly higher incidence of cardiac death or MI (3.2% vs.0.7%; HR, 4.34; 95% CI, 1.24–15.22; p=0.022) and ischemia-driven any revascularization. Conclusions For intermediate lesions, medical therapy alone, guided only by angiography, was associated with a higher risk of MACE at 3 years compared with performing PCI, mainly due to increased revascularization.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.