Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background and Objectives: The aim of this study was to confirm the effect of intralesional triamcinolone acetonide injections (TRIAM) to treat granulomatous tissue surrounding the tracheostomy stoma.Subjects and Method We reviewed and documented the medical charts of 20 patients who were administered with TRIAM to treat granulomatous tissue surrounding the tracheostomy stoma from January 2018 to June 2019 were. The surface area of the granulomatous tissue was measured using Image J. The differences between the area of the granulomatous tissue after conventional treatment and after TRIAM on the same patient were compared. Results: A total of 20 patients consisting of 12 males and 8 females were included, with the patients’ average age being 60.0±14.3 years. The initial surface area of granulation tissue was 1.266±0.449 cm2, and 1.243±0.432 cm2 after conventional treatment, showing no statistically significant difference in the tissue area (p=0.143). The pre-injection surface area of granulation tissue was 1.243±0.432 cm2, and the area on the 7th day after the third injection was 0.477±0.217 cm2, showing a significant difference (p<0.001). Conclusion Compared to the conventional treatment, the surface area of granulomatous tissue surrounding the tracheostomy stoma significantly decreased after being treating with TRIAM. This finding suggests the effectiveness of TRIAM as a treatment of granulomatous tissue surrounding the tracheostomy stoma without complications such as bleeding.

Background and Objectives: The aim of this study was to confirm the effect of intralesional triamcinolone acetonide injections (TRIAM) to treat granulomatous tissue surrounding the tracheostomy stoma.Subjects and Method We reviewed and documented the medical charts of 20 patients who were administered with TRIAM to treat granulomatous tissue surrounding the tracheostomy stoma from January 2018 to June 2019 were. The surface area of the granulomatous tissue was measured using Image J. The differences between the area of the granulomatous tissue after conventional treatment and after TRIAM on the same patient were compared. Results: A total of 20 patients consisting of 12 males and 8 females were included, with the patients’ average age being 60.0±14.3 years. The initial surface area of granulation tissue was 1.266±0.449 cm2, and 1.243±0.432 cm2 after conventional treatment, showing no statistically significant difference in the tissue area (p=0.143). The pre-injection surface area of granulation tissue was 1.243±0.432 cm2, and the area on the 7th day after the third injection was 0.477±0.217 cm2, showing a significant difference (p<0.001). Conclusion Compared to the conventional treatment, the surface area of granulomatous tissue surrounding the tracheostomy stoma significantly decreased after being treating with TRIAM. This finding suggests the effectiveness of TRIAM as a treatment of granulomatous tissue surrounding the tracheostomy stoma without complications such as bleeding.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Purpose: Emphysematous pyelonephritis (EPN) is a life-threatening disease requiring immediate treatment. This multicenter retrospective cohort study aimed to analyze the mortality rate and risk factors associated with EPN. Materials and Methods: Between January 2011 and February 2021, 217 patients diagnosed with EPN via computed tomography who visited 14 teaching hospitals were retrospectively analyzed. Clinical data, including age, sex, comorbidities, Huang and Tseng classification, hydronephrosis, acute kidney injury, blood and urine tests, surgical interventions, percutaneous drainage, and conservative treatments, were compared between the survival and death groups. Risk factors for mortality due to EPN were analyzed using univariate and multivariate methods. Results: The mean age of survivors and deceased patients was 67.8 and 69.0 years, respectively (p=0.136). The sex distribution (male/female) was 48/146 and 8/15, respectively (p=0.298). Of the 217 patients, 23 died, resulting in a mortality rate of 10.6%. In univariate analysis, the Huang and Tseng classification (p=0.004), platelet count (p=0.005), and acute kidney injury (p=0.007) were significantly associated with mortality from EPN. In multivariate analysis, only the Huang and Tseng classification (p=0.029) was identified as a risk factor. Mortality rates according to the Huang and Tseng classification were as follows: class I (5.88%), class II (7.50%), class IIIa (14.28%), class IIIb (25.00%), and class IV (23.07%). Conclusions EPN is associated with a high mortality rate. Among various clinical factors, the Huang and Tseng classification was the most significant indicator for predicting mortality.

Purpose: The long-term outcomes and efficacy of partial stapled hemorrhoidopexy (PSH) compared with those of conventional hemorrhoidectomy (CH) are not fully understood. This study aimed to introduce a modified PSH (mPSH) and compare its clinical efficacy and safety with those of CH. Methods: A prospective randomized controlled trial was conducted. This study was performed at a single hospital and involved 6 colorectal surgeons. In total, 110 patients were enrolled between July 2019 and September 2020. Patients were randomly assigned to undergo either mPSH group (n=55) or CH group (n=55). The primary outcome was to compare postoperative average pain and postoperative peak pain using visual analog scale score between the 2 groups. Results: The required duration of analgesia was shorter in the mPSH group than in the CH group, although the difference was not statistically significant (P=0.096). However, the laxative requirement duration (P<0.010), return to work (P<0.010), satisfaction score (P<0.010), and Vaizey score (P=0.014) were significantly better in the mPSH group. The average and peak postoperative pain scores were significantly lower in the mPSH group during the 15 days after surgery (P<0.001). The overall complication rate in both groups was 9.1%, with no significant difference between the groups (P=0.867). Conclusion The mPSH group demonstrated better improvement in symptoms, lower pain scores, and greater patient early satisfaction after surgery than the CH group. Therefore, this surgical technique appears to be a safe and effective alternative for CH.

Background and Objectives: The aim of this study was to confirm the effect of intralesional triamcinolone acetonide injections (TRIAM) to treat granulomatous tissue surrounding the tracheostomy stoma.Subjects and Method We reviewed and documented the medical charts of 20 patients who were administered with TRIAM to treat granulomatous tissue surrounding the tracheostomy stoma from January 2018 to June 2019 were. The surface area of the granulomatous tissue was measured using Image J. The differences between the area of the granulomatous tissue after conventional treatment and after TRIAM on the same patient were compared. Results: A total of 20 patients consisting of 12 males and 8 females were included, with the patients’ average age being 60.0±14.3 years. The initial surface area of granulation tissue was 1.266±0.449 cm2, and 1.243±0.432 cm2 after conventional treatment, showing no statistically significant difference in the tissue area (p=0.143). The pre-injection surface area of granulation tissue was 1.243±0.432 cm2, and the area on the 7th day after the third injection was 0.477±0.217 cm2, showing a significant difference (p<0.001). Conclusion Compared to the conventional treatment, the surface area of granulomatous tissue surrounding the tracheostomy stoma significantly decreased after being treating with TRIAM. This finding suggests the effectiveness of TRIAM as a treatment of granulomatous tissue surrounding the tracheostomy stoma without complications such as bleeding.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Purpose: Emphysematous pyelonephritis (EPN) is a life-threatening disease requiring immediate treatment. This multicenter retrospective cohort study aimed to analyze the mortality rate and risk factors associated with EPN. Materials and Methods: Between January 2011 and February 2021, 217 patients diagnosed with EPN via computed tomography who visited 14 teaching hospitals were retrospectively analyzed. Clinical data, including age, sex, comorbidities, Huang and Tseng classification, hydronephrosis, acute kidney injury, blood and urine tests, surgical interventions, percutaneous drainage, and conservative treatments, were compared between the survival and death groups. Risk factors for mortality due to EPN were analyzed using univariate and multivariate methods. Results: The mean age of survivors and deceased patients was 67.8 and 69.0 years, respectively (p=0.136). The sex distribution (male/female) was 48/146 and 8/15, respectively (p=0.298). Of the 217 patients, 23 died, resulting in a mortality rate of 10.6%. In univariate analysis, the Huang and Tseng classification (p=0.004), platelet count (p=0.005), and acute kidney injury (p=0.007) were significantly associated with mortality from EPN. In multivariate analysis, only the Huang and Tseng classification (p=0.029) was identified as a risk factor. Mortality rates according to the Huang and Tseng classification were as follows: class I (5.88%), class II (7.50%), class IIIa (14.28%), class IIIb (25.00%), and class IV (23.07%). Conclusions EPN is associated with a high mortality rate. Among various clinical factors, the Huang and Tseng classification was the most significant indicator for predicting mortality.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.