PURPOSE: This pilot study investigated the effect of surface roughness on osseointegration by comparing two types of commercial SLA-treated dental implants with different surface roughness levels: moderately rough (Sa = 1 – 2 µm) and rough surfaces (Sa > 2 µm). MATERIALS AND METHODS: Two implant groups were studied: TS (rough surface) and ADD (moderately rough surface) groups. Surface characteristics were analyzed using optical profilometry and SEM. In vitro studies using BRITER cells assessed cell adhesion, proliferation, and osteogenic differentiation through CCK-8 assay and qRT-PCR for osteopontin (OPN), osteocalcin (OCN), and alkaline phosphatase (ALP) expression. The in vivo study involved 12 implants (six per group) placed in mandibular defects of two beagle dogs. After 8 weeks, histomorphometric analysis evaluated bone to implant contact (BIC) and inter-thread bone density (ITBD). Statistical analysis used Student’s t-test and two-way ANOVA for in vitro data, and Mann-Whitney U test for in vivo data. RESULTS: Surface analysis revealed Sa values of 2.50 ± 0.27 µm for the TS group and 1.80 ± 0.06 µm for the ADD group. In vitro studies showed no significant differences in cell adhesion and proliferation between the groups (P > .05). However, gene expression patterns differed, with ADD group showing higher OPN expression (P < .001) and TS group showing higher ALP expression (P < .01). The in vivo study revealed no statistically significant differences in BIC and ITBD between the two groups (P > .05). CONCLUSION Surface roughness influenced osteoblast differentiation in vitro, but did not significantly affect osseointegration outcomes in vivo. Both moderately rough and rough surfaces appeared to support comparable levels of osseointegration. Larger studies are needed to confirm these findings and determine optimal implant surface characteristics.

PURPOSE: This pilot study investigated the effect of surface roughness on osseointegration by comparing two types of commercial SLA-treated dental implants with different surface roughness levels: moderately rough (Sa = 1 – 2 µm) and rough surfaces (Sa > 2 µm). MATERIALS AND METHODS: Two implant groups were studied: TS (rough surface) and ADD (moderately rough surface) groups. Surface characteristics were analyzed using optical profilometry and SEM. In vitro studies using BRITER cells assessed cell adhesion, proliferation, and osteogenic differentiation through CCK-8 assay and qRT-PCR for osteopontin (OPN), osteocalcin (OCN), and alkaline phosphatase (ALP) expression. The in vivo study involved 12 implants (six per group) placed in mandibular defects of two beagle dogs. After 8 weeks, histomorphometric analysis evaluated bone to implant contact (BIC) and inter-thread bone density (ITBD). Statistical analysis used Student’s t-test and two-way ANOVA for in vitro data, and Mann-Whitney U test for in vivo data. RESULTS: Surface analysis revealed Sa values of 2.50 ± 0.27 µm for the TS group and 1.80 ± 0.06 µm for the ADD group. In vitro studies showed no significant differences in cell adhesion and proliferation between the groups (P > .05). However, gene expression patterns differed, with ADD group showing higher OPN expression (P < .001) and TS group showing higher ALP expression (P < .01). The in vivo study revealed no statistically significant differences in BIC and ITBD between the two groups (P > .05). CONCLUSION Surface roughness influenced osteoblast differentiation in vitro, but did not significantly affect osseointegration outcomes in vivo. Both moderately rough and rough surfaces appeared to support comparable levels of osseointegration. Larger studies are needed to confirm these findings and determine optimal implant surface characteristics.

PURPOSE: This pilot study investigated the effect of surface roughness on osseointegration by comparing two types of commercial SLA-treated dental implants with different surface roughness levels: moderately rough (Sa = 1 – 2 µm) and rough surfaces (Sa > 2 µm). MATERIALS AND METHODS: Two implant groups were studied: TS (rough surface) and ADD (moderately rough surface) groups. Surface characteristics were analyzed using optical profilometry and SEM. In vitro studies using BRITER cells assessed cell adhesion, proliferation, and osteogenic differentiation through CCK-8 assay and qRT-PCR for osteopontin (OPN), osteocalcin (OCN), and alkaline phosphatase (ALP) expression. The in vivo study involved 12 implants (six per group) placed in mandibular defects of two beagle dogs. After 8 weeks, histomorphometric analysis evaluated bone to implant contact (BIC) and inter-thread bone density (ITBD). Statistical analysis used Student’s t-test and two-way ANOVA for in vitro data, and Mann-Whitney U test for in vivo data. RESULTS: Surface analysis revealed Sa values of 2.50 ± 0.27 µm for the TS group and 1.80 ± 0.06 µm for the ADD group. In vitro studies showed no significant differences in cell adhesion and proliferation between the groups (P > .05). However, gene expression patterns differed, with ADD group showing higher OPN expression (P < .001) and TS group showing higher ALP expression (P < .01). The in vivo study revealed no statistically significant differences in BIC and ITBD between the two groups (P > .05). CONCLUSION Surface roughness influenced osteoblast differentiation in vitro, but did not significantly affect osseointegration outcomes in vivo. Both moderately rough and rough surfaces appeared to support comparable levels of osseointegration. Larger studies are needed to confirm these findings and determine optimal implant surface characteristics.

PURPOSE: This pilot study investigated the effect of surface roughness on osseointegration by comparing two types of commercial SLA-treated dental implants with different surface roughness levels: moderately rough (Sa = 1 – 2 µm) and rough surfaces (Sa > 2 µm). MATERIALS AND METHODS: Two implant groups were studied: TS (rough surface) and ADD (moderately rough surface) groups. Surface characteristics were analyzed using optical profilometry and SEM. In vitro studies using BRITER cells assessed cell adhesion, proliferation, and osteogenic differentiation through CCK-8 assay and qRT-PCR for osteopontin (OPN), osteocalcin (OCN), and alkaline phosphatase (ALP) expression. The in vivo study involved 12 implants (six per group) placed in mandibular defects of two beagle dogs. After 8 weeks, histomorphometric analysis evaluated bone to implant contact (BIC) and inter-thread bone density (ITBD). Statistical analysis used Student’s t-test and two-way ANOVA for in vitro data, and Mann-Whitney U test for in vivo data. RESULTS: Surface analysis revealed Sa values of 2.50 ± 0.27 µm for the TS group and 1.80 ± 0.06 µm for the ADD group. In vitro studies showed no significant differences in cell adhesion and proliferation between the groups (P > .05). However, gene expression patterns differed, with ADD group showing higher OPN expression (P < .001) and TS group showing higher ALP expression (P < .01). The in vivo study revealed no statistically significant differences in BIC and ITBD between the two groups (P > .05). CONCLUSION Surface roughness influenced osteoblast differentiation in vitro, but did not significantly affect osseointegration outcomes in vivo. Both moderately rough and rough surfaces appeared to support comparable levels of osseointegration. Larger studies are needed to confirm these findings and determine optimal implant surface characteristics.

PURPOSE: This pilot study investigated the effect of surface roughness on osseointegration by comparing two types of commercial SLA-treated dental implants with different surface roughness levels: moderately rough (Sa = 1 – 2 µm) and rough surfaces (Sa > 2 µm). MATERIALS AND METHODS: Two implant groups were studied: TS (rough surface) and ADD (moderately rough surface) groups. Surface characteristics were analyzed using optical profilometry and SEM. In vitro studies using BRITER cells assessed cell adhesion, proliferation, and osteogenic differentiation through CCK-8 assay and qRT-PCR for osteopontin (OPN), osteocalcin (OCN), and alkaline phosphatase (ALP) expression. The in vivo study involved 12 implants (six per group) placed in mandibular defects of two beagle dogs. After 8 weeks, histomorphometric analysis evaluated bone to implant contact (BIC) and inter-thread bone density (ITBD). Statistical analysis used Student’s t-test and two-way ANOVA for in vitro data, and Mann-Whitney U test for in vivo data. RESULTS: Surface analysis revealed Sa values of 2.50 ± 0.27 µm for the TS group and 1.80 ± 0.06 µm for the ADD group. In vitro studies showed no significant differences in cell adhesion and proliferation between the groups (P > .05). However, gene expression patterns differed, with ADD group showing higher OPN expression (P < .001) and TS group showing higher ALP expression (P < .01). The in vivo study revealed no statistically significant differences in BIC and ITBD between the two groups (P > .05). CONCLUSION Surface roughness influenced osteoblast differentiation in vitro, but did not significantly affect osseointegration outcomes in vivo. Both moderately rough and rough surfaces appeared to support comparable levels of osseointegration. Larger studies are needed to confirm these findings and determine optimal implant surface characteristics.

PURPOSE: This study was conducted to evaluate the effects of plasma treatment of sandblasted and acid-etched (SLA) titanium implants on surface cleansing and osseointegration in a beagle model. MATERIALS AND METHODS: For morphological analysis and XPS analysis, scanning electron microscope and x-ray photoelectron spectroscopy were used to analyze the surface topography and chemical compositions of implant before and after plasma treatment. For this animal experiment, twelve SLA titanium implants were divided into two groups:a control group (untreated implants) and a plasma group (implants treated with plasma). Each group was randomly located in the mandibular bone of the beagle dog (n = 6). After 8 weeks, the beagle dogs were sacrificed, and volumetric analysis and histometric analysis were performed within the region of interest. RESULTS: In morphological analysis, plasma treatment did not alter the implant surface topography or cause any physical damage. In XPS analysis, the atomic percentage of carbon at the inspection point before the plasma treatment was 34.09%. After the plasma treatment, it was reduced to 18.74%, indicating a 45% reduction in carbon. In volumetric analysis and histometric analysis, the plasma group exhibited relatively higher mean values for new bone volume (NBV), bone to implant contact (BIC), and inter-thread bone density (ITBD) compared to the control group. However, there was no significant difference between the two groups (P > .05). CONCLUSION Within the limits of this study, plasma treatment effectively eliminated hydrocarbons without changing the implant surface.

Purpose: Renal tumors account for approximately 7% of all childhood cancers. These include Wilms tumor (WT), clear cell sarcoma of the kidney (CCSK), malignant rhabdoid tumor of the kidney (MRTK), renal cell carcinoma (RCC), congenital mesoblastic nephroma (CMN) and other rare tumors. We investigated the epidemiology of pediatric renal tumors in Korea. Materials and Methods: From January 2001 to December 2015, data of pediatric patients (0–18 years) newly-diagnosed with renal tumors at 26 hospitals were retrospectively analyzed. Results: Among 439 patients (male, 240), the most common tumor was WT (n=342, 77.9%), followed by RCC (n=36, 8.2%), CCSK (n=24, 5.5%), MRTK (n=16, 3.6%), CMN (n=12, 2.7%), and others (n=9, 2.1%). Median age at diagnosis was 27.1 months (range 0-225.5) and median follow-up duration was 88.5 months (range 0-211.6). Overall, 32 patients died, of whom 17, 11, 1, and 3 died of relapse, progressive disease, second malignant neoplasm, and treatment-related mortality. Five-year overall survival and event free survival were 97.2% and 84.8% in WT, 90.6% and 82.1% in RCC, 81.1% and 63.6% in CCSK, 60.3% and 56.2% in MRTK, and 100% and 91.7% in CMN, respectively (p < 0.001). Conclusion The pediatric renal tumor types in Korea are similar to those previously reported in other countries. WT accounted for a large proportion and survival was excellent. Non-Wilms renal tumors included a variety of tumors and showed inferior outcome, especially MRTK. Further efforts are necessary to optimize the treatment and analyze the genetic characteristics of pediatric renal tumors in Korea.

PURPOSE: This prospective clinical study was conducted to evaluate the clinical usefulness of the freely detachable zirconia ball- and spring-retained implant prosthesis (BSRP) through a comparative analysis of screw- and cement-retained implant prosthesis (SCRP). MATERIALS AND METHODS: A multi-center, randomized, prospective clinical study evaluating the clinical usefulness of the detachable zirconia ball- and spring-retained implant prostheses was conducted. Sixty-four implant prostheses in 64 patients were examined. Periodic observational studies were conducted at 0, 3, 6, and 12 months after delivery of the implant prosthesis. Factors such as implant success rate, marginal bone resorption, periodontal pocket depth, plaque and bleeding index, and prosthetic complications were evaluated, respectively. RESULTS: During the 1-year observation period, all implants survived without functional problems and clinical mobility, showing a 100% implant success rate. Marginal bone resorption was significantly higher in the SCRP group than in the BSRP group only at the time of implant prosthesis delivery (P = .043). In all observation periods, periodontal pocket depth was slightly higher in the BSRP group than in the SCRP group, but there was no significant difference (P > .05). The modified plaque index (mPI) scores of both groups were moderate. Higher ratio of a score 2 in modified sulcus bleeding index (mBI) was observed in the BSRP group in the 6- and 12-months observation. CONCLUSION Within the limitations of this study, the newly developed zirconia ball- and spring-retained implant prosthesis could be considered as an applicable and predictable treatment method along with the existing screw- and cement-retained prosthesis.

PURPOSE: . This study aims to clinically compare the fitness and trueness of zirconia crowns fabricated by different combinations of open CAD-CAM systems. MATERIALS AND METHODS: . Total of 40 patients were enrolled in this study, and 9 different zirconia crowns were prepared per patient. Each crown was made through the cross-application of 3 different design software (EZIS VR, 3Shape Dental System, Exocad) with 3 different processing devices (Aegis HM, Trione Z, Motion 2). The marginal gap, absolute marginal discrepancy, internal gap(axial, line angle, occlusal) by a silicone replica technique were measured to compare the fit of the crown. The scanned inner and outer surfaces of the crowns were compared to CAD data using 3D metrology software to evaluate trueness. RESULTS: . There were significant differences in the marginal gap, absolute marginal discrepancy, axial and line angle internal gap among the groups (P < .05) in the comparison of fit. There was no statistically significant difference among the groups in terms of occlusal internal gap. The trueness ranged from 36.19 to 43.78 μm but there was no statistically significant difference within the groups (P > .05). CONCLUSION . All 9 groups showed clinically acceptable level of marginal gaps ranging from 74.26 to 112.20 μm in terms of fit comparison. In the comparison of trueness, no significant difference within each group was spotted. Within the limitation of this study, open CAD-CAM systems used in this study can be assembled properly to fabricate zirconia crown. [J Adv Prosthodont 2023;15:155-70]

Background: To investigate the relationship between polycystic ovary syndrome (PCOS) in Korean women and childhood growth and obesity of their offspring. Methods: This longitudinal case-control study using the Korean National Health Insurance claims database and the National Health Screening Program for Infants and Children database included women who delivered singletons between January 2007 and December 2008. Offspring’s body mass index (BMI) measurements taken between 42 and 80 months of age were compared according to a maternal history of PCOS. Results: Among a total of 131,805 participants, 1,213 women had a history of PCOS and 130,592 women did not. Female offspring aged 66–80 months born to women with PCOS had significantly higher BMI than those born to women without PCOS; there was no significant difference in that of male offspring regardless of maternal PCOS. In the generalized estimating equation and multivariable logistic regression analyses, the female offspring born to women with PCOS had a significantly higher risk of obesity during the age of 42–54 and 66–80 months (odds ratio [OR], 1.6; 95% confidence interval [CI], 1.09–2.21 and OR, 1.5; 95% CI, 1.05–2.15, respectively), than those born to women without PCOS, after adjusting for several confounding factors. Conclusion Maternal PCOS is independently associated with an increased incidence of childhood obesity in female offspring among Korean women. Women with PCOS should consider the risk of early childhood obesity in their daughters, even if they maintain a healthy weight themselves.