The dog frontal sinus may represent an alternative model dental implant research; its topographical resemblance to the maxillary sinus renders it a potentially favorable experimental environment. The aim of this study was thus to elucidate the anatomical configuration of the canine frontal sinus and histological characteristics, and to determine whether it could be a new canine experimental model for dental implant research. Twenty-four sides of canine frontal bones were harvested. The distance from the nasion to the emerging point of the lateral aspect of the canine frontal sinus was measured with the aid of Lucion software. The thicknesses of the canine frontal sinus wall were measured, and the two specimens stained with hematoxylin and eosin. The mean distance from the nasion to the emerging point of the lateral aspect of the canine frontal sinus was 16.0 mm. The mean thicknesses of the canine frontal bone at 3, 6, 9, 12, and 15 mm lateral to the midsagittal plane were 2.3, 2.7, 3.2, 3.8, and 3.7 mm, respectively. The canine frontal sinus was lined with pseudostratified ciliated columnar epithelium. These data suggest that the canine frontal sinus is a suitable alternative to the canine maxillary sinus as a model for studying various sinus augmentation protocols.
Animals ; Dental Implants ; Dogs ; Eosine Yellowish-(YS) ; Epithelium ; Frontal Bone ; Frontal Sinus* ; Hematoxylin ; Maxillary Sinus ; Models, Theoretical*

The goal of this study was to determine the characteristics of the horizontal cervical wrinkle and to investigate histological feature, especially with respect to elastin and collagen fiber. Histologic sample were harvested from two fresh adult cadavers where the cervical wrinkle is in the neck. The tissue sections were stained with hematoxylin and eosin (HE) or Masson's Trichrome. In sections of neck skin, keratinization was observed in the epidermis, and many collagen fibers were observed in the dermis layer as in other skin. Specifically, a lot of short and curly elastic fiber were observed between the collagen fibers in the dermis. These elastic fibers were not stained with eosin and observed in gray. This long ligament-like structures were observed in the dermis. The ligament-like structures were stained with dark red by trichrome. These results indicate that these ligament-like structures are neither typical ligament nor typical smooth muscles. The results obtained from present study showed a ligamentous structure originating from the fascial layer (platysma muscle or investing layer). The results may help to understand the reasons about the formation of horizontal cervical wrinkle.
Adult ; Aging ; Cadaver ; Collagen ; Dermis ; Elastic Tissue ; Elastin ; Eosine Yellowish-(YS) ; Epidermis ; Hematoxylin ; Humans ; Ligaments* ; Muscle, Smooth ; Neck* ; Skin

Hypernatremia is a rare cause of rhabdomyolysis. Here, we report a case of hypernatremia-induced rhabdomyolysis in a patient with meningioma involving the pituitary gland. A 61-year-old male was admitted for decreased mentality and poor oral intake. He had undergone an operation for meningioma 10 years prior. At admission, he appeared lethargic and severely dehydrated with an initial sodium level of 178 mEq/L. Hypernatremia remained persistent despite massive hydration and the serum creatine phosphokinase level was 18,047 U/L after 3 days. Bone scintigraphy also showed findings consistent with rhabdomyolysis. Brain magnetic resonance imaging revealed extensive masses involving the pituitary gland and an intranasal biopsy confirmed meningioma. Polyuria, and low anti-diuretic hormone levels supported the diagnosis of central diabetes insipidus-induced hypernatremia. Desmopressin was administered intranasally and the patient's serum sodium and muscle enzyme levels were normalized.
Biopsy ; Brain ; Creatine Kinase ; Deamino Arginine Vasopressin ; Diabetes Insipidus ; Diagnosis ; Humans ; Hypernatremia ; Magnetic Resonance Imaging ; Male ; Meningioma* ; Middle Aged ; Pituitary Gland* ; Polyuria ; Radionuclide Imaging ; Rhabdomyolysis* ; Sodium

PURPOSE: This study evaluated the surface characteristics and bond strength produced using a novel technique for coating hydroxyapatite (HA) onto titanium implants. METHODS: HA was coated on the titanium implant surface using a super-high-speed (SHS) blasting method with highly purified HA. The coating was performed at a low temperature, unlike conventional HA coating methods. Coating thickness was measured. The novel HA-coated disc was fabricated. X-ray diffraction analysis was performed directly on the disc to evaluate crystallinity. Four novel HA-coated discs and four resorbable blast medium (RBM) discs were prepared. Their surface roughnesses and areas were measured. Five puretitanium, RBM-treated, and novel HA-coated discs were prepared. Contact angle was measured. Two-way analysis of variance and the post-hoc Scheffe's test were used to analyze differences between the groups, with those with a probability of P<0.05 considered to be statistically significant. To evaluate exfoliation of the coating layer, 7 sites on the mandibles from 7 mongrel dogs were used. Other sites were used for another research project. In total, seven novel HA-coated implants were placed 2 months after extraction of premolars according to the manufacturer's instructions. The dogs were sacrificed 8 weeks after implant surgery. Implants were removed using a ratchet driver. The surface of the retrieved implants was evaluated microscopically. RESULTS: A uniform HA coating layer was formed on the titanium implants with no deformation of the RBM titanium surface microtexture when an SHS blasting method was used. CONCLUSIONS: These HA-coated implants exhibited increased roughness, crystallinity, and wettability when compared with RBM implants.
Animals ; Bicuspid ; Coated Materials, Biocompatible ; Crystallins ; Dental Implants ; Dogs ; Durapatite ; Hydroxyapatites ; Mandible ; Titanium ; Wettability ; X-Ray Diffraction

PURPOSE: This study evaluated the surface characteristics and bond strength produced using a novel technique for coating hydroxyapatite (HA) onto titanium implants. METHODS: HA was coated on the titanium implant surface using a super-high-speed (SHS) blasting method with highly purified HA. The coating was performed at a low temperature, unlike conventional HA coating methods. Coating thickness was measured. The novel HA-coated disc was fabricated. X-ray diffraction analysis was performed directly on the disc to evaluate crystallinity. Four novel HA-coated discs and four resorbable blast medium (RBM) discs were prepared. Their surface roughnesses and areas were measured. Five puretitanium, RBM-treated, and novel HA-coated discs were prepared. Contact angle was measured. Two-way analysis of variance and the post-hoc Scheffe's test were used to analyze differences between the groups, with those with a probability of P<0.05 considered to be statistically significant. To evaluate exfoliation of the coating layer, 7 sites on the mandibles from 7 mongrel dogs were used. Other sites were used for another research project. In total, seven novel HA-coated implants were placed 2 months after extraction of premolars according to the manufacturer's instructions. The dogs were sacrificed 8 weeks after implant surgery. Implants were removed using a ratchet driver. The surface of the retrieved implants was evaluated microscopically. RESULTS: A uniform HA coating layer was formed on the titanium implants with no deformation of the RBM titanium surface microtexture when an SHS blasting method was used. CONCLUSIONS: These HA-coated implants exhibited increased roughness, crystallinity, and wettability when compared with RBM implants.
Animals ; Bicuspid ; Coated Materials, Biocompatible ; Crystallins ; Dental Implants ; Dogs ; Durapatite ; Hydroxyapatites ; Mandible ; Titanium ; Wettability ; X-Ray Diffraction

PURPOSE: Special care is necessary to avoid invading important anatomic structures during surgery when presurgical planning is made based on radiographs. However, none of these types of radiography represents a perfect modality. The purpose of this study was to determine the reliability of presurgical planning based on the use of two types of radiographic image (digital panoramic radiography [DPR] and cone-beam computed tomography [CBCT]) by beginner dentists to place implants, and to quantify differences in measurements between radiographic images and real specimens. METHODS: Ten fresh cadavers without posterior teeth were used, and twelve practitioners who had no experience of implant surgery performed implant surgery after 10 hours of basic instruction using conventional surgical guide based on CBCT or DPR. Two types of measurement error were evaluated: 1) the presurgical measurement error, defined as that between the presurgical and postsurgical measurements in each modality of radiographic analysis, and 2) the measurement error between postsurgical radiography and the real specimen. RESULTS: The mean presurgical measurement error was significantly smaller for CBCT than for DPR in the maxillary region, whereas it did not differ significantly between the two imaging modalities in the mandibular region. The mean measurement error between radiography and real specimens was significantly smaller for CBCT than for DPR in the maxillary region, but did not differ significantly in the mandibular region. CONCLUSIONS: Presurgical planning can be performed safely using DPR in the mandible; however, presurgical planning using CBCT is recommended in the maxilla when a structure in a buccolingual location needs to be evaluated because this imaging modality supplies buccolingual information that cannot be obtained from DPR.
Cadaver ; Cone-Beam Computed Tomography ; Dental Implantation ; Dentistry ; Dentists ; Equipment and Supplies ; Humans ; Hypogonadism ; Maxilla ; Mitochondrial Diseases ; Ophthalmoplegia ; Radiography, Panoramic ; Tooth

PURPOSE: Special care is necessary to avoid invading important anatomic structures during surgery when presurgical planning is made based on radiographs. However, none of these types of radiography represents a perfect modality. The purpose of this study was to determine the reliability of presurgical planning based on the use of two types of radiographic image (digital panoramic radiography [DPR] and cone-beam computed tomography [CBCT]) by beginner dentists to place implants, and to quantify differences in measurements between radiographic images and real specimens. METHODS: Ten fresh cadavers without posterior teeth were used, and twelve practitioners who had no experience of implant surgery performed implant surgery after 10 hours of basic instruction using conventional surgical guide based on CBCT or DPR. Two types of measurement error were evaluated: 1) the presurgical measurement error, defined as that between the presurgical and postsurgical measurements in each modality of radiographic analysis, and 2) the measurement error between postsurgical radiography and the real specimen. RESULTS: The mean presurgical measurement error was significantly smaller for CBCT than for DPR in the maxillary region, whereas it did not differ significantly between the two imaging modalities in the mandibular region. The mean measurement error between radiography and real specimens was significantly smaller for CBCT than for DPR in the maxillary region, but did not differ significantly in the mandibular region. CONCLUSIONS: Presurgical planning can be performed safely using DPR in the mandible; however, presurgical planning using CBCT is recommended in the maxilla when a structure in a buccolingual location needs to be evaluated because this imaging modality supplies buccolingual information that cannot be obtained from DPR.
Cadaver ; Cone-Beam Computed Tomography ; Dental Implantation ; Dentistry ; Dentists ; Equipment and Supplies ; Humans ; Hypogonadism ; Maxilla ; Mitochondrial Diseases ; Ophthalmoplegia ; Radiography, Panoramic ; Tooth

Sihler's staining allows visualization of the nerve distribution within soft tissues without extensive dissection and does not require slide preparation, unlike traditional approaches. This technique can be applied to the mucosa, muscle, and organs that contain myelinated nerve fibers. In particular, Sihler's technique may be considered the best tool for observing nerve distribution within skeletal muscles. The intramuscular distribution pattern of nerves is difficult to observe through manual manipulation due to the gradual tapering of nerves toward the terminal end of muscles, so it should be accompanied by histological studies to establish the finer branches therein. This method provides useful information not only for anatomists but also for physiologists and clinicians. Advanced knowledge of the nerve distribution patterns will be useful for developing guidelines for clinicians who perform operations such as muscle resection, tendon transplantation, and botulinum toxin injection. Furthermore, it is a useful technique to develop neurosurgical techniques and perform electrophysiological experiments. In this review, Sihler's staining technique is described in detail, covering its history, staining protocol, advantages, disadvantages, and possible applications. The application of this technique for determining the arterial distribution pattern is also described additionally in this study.
Anatomists ; Arteries ; Botulinum Toxins ; Humans ; Mucous Membrane ; Muscle, Skeletal ; Muscles ; Nerve Fibers, Myelinated ; Tendons ; Transplants

Rheumatoid arthritis is associated with an increased risk of hematological malignancy as a result of the RA itself or its treatment. We report here on an unusual case of a 55-year-old female with long-standing rheumatoid arthritis and who was treated with low dose methotrexate and hydrochloroquine. She was diagnosed with chronic myelogenous leukemia that manifested with severe thrombocytosis and basophilia, and this was treated with imatinib mesylate. After 6 months, she achieved a complete cytogenetic response of the CML and a complete resolution of all the RA symptoms without DMARDs.
Antirheumatic Agents ; Arthritis, Rheumatoid ; Benzamides ; Cytogenetics ; Female ; Hematologic Neoplasms ; Humans ; Leukemia, Myelogenous, Chronic, BCR-ABL Positive ; Mesylates ; Methotrexate ; Middle Aged ; Piperazines ; Pyrimidines ; Thrombocytosis ; Imatinib Mesylate

PURPOSE: The aim of this study was to assess the usefulness of growth velocity at 3 months after gonadotropinreleasing hormone (GnRH) agonist treatment as a predictive value of 1 year growth velocity after treatment in girls with precocious puberty. METHODS: We studied 30 Korean girls with precocious puberty whose chronologic and bone age were less than 9 years and 11 years old, respectively at diagnosis. They treated with a 4 week interval GnRH agonist subcutaneous injections for at least more than 1 year. The patients who were treated with growth hormone simultaneously excluded for this study. Data were collected from chart review retrospectively. We measured heights and calculated growth velocities of the subjects at 3 months and 1 year after GnRH agonist treatment. RESULTS: The mean chronologic age and bone age of the subjects were 8.3 +/- 0.8 year and 10.4 +/- 0.6 years, respectively. The growth velocity at 3 months, 6 months, 9 months and 1 year after GnRH agonist treatment were 7.1 +/- 2.6, 6.6 +/- 2.1, 5.7 +/- 1.3 and 5.8 +/- 0.9 cm/yr, respectively. The positive correlation between the growth velocity at 3 months and 6 months, 9 months, 1 year after GnRH agonist treatment were shown(P < 0.001, P < 0.001, P = 0.002, respectively). CONCLUSION: In this study, the growth velocity at 1 year after GnRH agonist treatment may be predicted by the growth velocity at 3 months after treatment. The patient whose growth velocity at 3 months after GnRH agnoist treatment was low would be needed to observe the growth pattern carefully and to consider combined growth hormone treatment, if needed. It may be deserve further studies to improve final height in patients with central precocious puberty in various conditions.
Gonadotropin-Releasing Hormone ; Growth Hormone ; Humans ; Injections, Subcutaneous ; Puberty, Precocious ; Retrospective Studies