ObjectiveTo explore the role of lead exposure in the phenotypic transformation of vascular smooth muscle cells (VSMC), and to provide new insights for the mechanism of lead impact on vascular lesions. MethodsMouse aortic smooth muscle cells (MOVAS) were divided into a control group (0 μmol·L^-1), low concentration lead groups (0.1, 1, 5, and 10 μmol·L^-1), and high concentration lead groups (15, 25, and50 μmol·L^-1). MTT assays were used to assess the proliferation of the cells, and scratch assays were implicated to measure migration ability of the cells. Fluorescence quantitative PCR was employed to determine levels of mRNA expression for smooth muscle actin α (α⁃SMA), smooth muscle 22 alpha (SM22α), synthetic phenotype-related genes osteopontin (OPN), matrix metalloproteinase 9 (MMP9), and the transcription factor SOX9. Immunoblotting was used to determine levels of protein expression for α-SMA, OPN, and MMP9. ResultsProliferation of MOVAS was observed under the lead ions concentrations of 0‒50 µmol·L^-1, with a significant increase of proliferation compared to the control group at the concentrations of 5‒50 µmol·L^-1 (all P<0.05). The migration ability of cells gradually increased at the concentrations of 0‒10 µmol·L^-1, with a significant increase at 5 (q=4.574, P=0.003) and 10 µmol·L^-1 (q=10.570, P<0.001) compared to the control group. The 10 µmol·L^-1 lead ions significantly reduced the levels of mRNA expression for vascular smooth muscle contractile phenotype genes α⁃SMA (q=7.426, P<0.001) and SM22α (q=4.766, P=0.001), while significantly increasing the levels of mRNA expression for OPN (q=11.330, P<0.001), MMP9 (q=7.842, P<0.001), and SOX9 (q=11.120, P<0.001) genes. Furthermore, the 10 µmol·L^-1 lead ions significantly reduced the levels of protein expression for the vascular smooth muscle contractile phenotype marker α-SMA protein (q=2.897, P=0.049), while significantly increasing the levels of protein expression for the synthetic markers OPN (q=3.188, P=0.031) and MMP9 (q=3.292, P=0.026), compared to the control group. ConclusionTreatment with lead in vitro induced VSMC to differentiate from contractile phenotype to synthetic phenotype, indicating that a certain dose of lead exposure might be detrimental to the cardiovascular system.

AIM:To investigate the expression of centromere protein-H(CENP-H)in adrenocortical carcino-ma(ACC)and its relationship with disease progression and prognosis,and to explore the impact of CENP-H gene knock-down on the viability and migration of ACC cells.METHODS:The mRNA expression level of CENP-H in 76 ACC pa-tients and 128 healthy controls,and its correlations with tumor stages and prognosis were analyzed by GEPIA2 database.The mRNA expression of CENP-H in different stages of ACC and its correlation with disease prognosis were further ana-lyzed by ULCAN database.The protein expression of CENP-H was examined by immunohistochemical staining of paraffin-embedded ACC and normal adrenal gland specimens.Knockdown of CENP-H by siRNA(siCENP-H)was performed in human ACC cell line H295R.The viabilty of H295R cells transfected with siCENP-H or siNC was measured by CCK-8 as-say,the cell migration was detected by wound-healing assay,and the protein levels of CENP-H,p-ERK1/2,t-ERK1/2,p-P38,t-P38,p-JNK1/2 and t-JNK1/2 were detected by Western blot.RESULTS:The mRNA level of CENP-H was signifi-cantly higher in ACC than that in normal controls,and was correlated with tumor stages and prognosis.The protein level of CENP-H was significantly higher in ACC specimens than that in normal adrenal gland.Knockdown of CENP-H in H295R cells resulted in decreased cell viability and migration.The protein levels of p-P38 and p-JNK1/2 were decreased in si-CENP-H group.CONCLUSION:CENP-H is highly expressed in ACC,and is correlated with tumor stages and poor prognosis.Knockdown of CENP-H can inhibit the viability and migration of ACC cells,and its mechanism may related to inactivation of P38 and JNK signaling pathways.

Objective:To analyze the mutation characteristics of rpoB gene in rifampicin-resistant Brucella strains. Methods:DNA of 4 rifampicin-resistant Brucella strains (JSY-26, G-9, WSY-13 and AW-3) isolated from Xinjiang Uygur Autonomous Region was selected, rifampicin rpoB gene was amplified by PCR and its nucleotide sequence was sequenced. The rpoB gene sequences of rifampicin-resistant Brucella standard strain (RB51) and sensitive strain (ALT-8) were used as reference, the mutation sites and types of the rpoB gene inside and outside the rifampicin resistance determination region (RRDR) of the 4 rifampicin-resistant Brucella strains were analyzed by Mega 7.0 software. Results:Through sequence alignment, both JSY-26 and WSY-13 strains underwent a single base point mutation at the RRDR 1 576 bp of the rpoB gene, with the base changing from guanine (G) to adenine (A). The G-9 strain underwent a single base point mutation at the RRDR 1 606 bp of the rpoB gene, with the base changing from cytosine (C) to A. The AW-3 strain showed 5 mutations of 3 types outside rpoB gene RRDR at 2 536, 2 537, 2 626, 2 636 and 2 654 bp, namely 3 insertion mutations [thymine (T) insertion once and C insertion twice], 1 deletion mutation (C deletion), and 1 single base point mutation (from G to C mutation).Conclusion:The RRDR mutations in the rpoB gene of the rifampicin-resistant Brucella strains are mainly characterized by single base point mutations, while multiple insertion and deletion mutations occur outside the RRDR.

Objective:To evaluate the reliability of a region-locked 3D-printed template combined with a bi-directional matching scheme in assistance of screw placement for thoracolumbar fractures.Methods:From January 2019 to March 2023, 52 patients with thoracolumbar fracture were treated at Department of Orthopedics, The People's Hospital of Liyang. They were 29 males and 23 females, with an age of (58.2±13.3) years. They were divided into a template group and a free-hand group according to the different screw placements. In the template group of 25 cases, a region-locked 3D-printed template combined with a bi-directional matching scheme was used to assist the pedicle positioning; in the free-hand group of 27 cases, the free hand screw placement was assisted only by image data and C-arm fluoroscopy. The operation time, intraoperative fluoroscopy frequency, intraoperative blood loss, complications, and placement accuracy were compared between the 2 groups. Visual analogue scale (VAS), Oswestry disability index (ODI), and anterior height ratio of the injured vertebra were compared between preoperation, 1 week postoperation, and the final follow-up, as well as between the 2 groups.Results:There were no statistically significant differences in the preoperative general data between the 2 groups, showing comparability ( P>0.05). All patients were followed up for (11.2±4.2) months. The differences were not statistically significant between the 2 groups in intraoperative blood loss, rate of complications, VAS or ODI at preoperation, 1 week postoperation, or the final follow-up, or in anterior height ratio of the injured vertebra ( P>0.05). In the template group, the operation time [(80.1±18.5) min] was significantly longer than that in the free-hand group [(69.4±16.6) min], the intraoperative fluoroscopy frequency [2 (2, 3) times] significantly lower than that in the free-hand group [3 (3, 4) times], and the placement accuracy [98.4% (127/129)] significantly higher than that in the free-hand group [91.8% (112/122)] (all P<0.05). All patients showed significant improvements in VAS, ODI and anterior height ratio of the injured vertebra at postoperative 1 week compared with the preoperative values, and the improvements at the last follow-up were significantly larger than those at postoperative 1 week ( P<0.05). No injury to the spinal cord, nerve root or blood vessel was observed postoperatively. Conclusions:In the treatment of thoracolumbar fractures, the screw placement assisted by a region-locked 3D-printed template combined with a bi-directional matching scheme is better than free-hand screw placement in terms of improved accuracy and reduced fluoroscopy, but the former incurs longer operative exposure than the latter. There is no significant difference between the 2 methods of screw placement in clinical efficacy.

With the rapid development of the interdisciplinary area of artificial intelligence and medicine, large language model (LLM) has been widely used in the fields such as diagnosis and treatment, medicine, and healthcare. LLM has unique advantages in the field of traditional Chinese medicine (TCM), such as high consistency with the "Four Diagnostic Methods", perfect combination of natural language and self-supervised learning in TCM, the ability to adapt to the characteristics TCM formulas, and the assistance in TCM diagnosis and treatment. At present, various LLM models have been developed, including the "Qihuang Ask Big Model" and the Digital Traditional Chinese Medicine Big Model "GLM-130B", but they still face challenges such as value mismatch and medical abuse, increased demand for interpretability, lack of advanced technology, and domestic policy access. This article reviews the evolution of LLM, its unique advantages and applications in the field of TCM, the problems and challenges, and the future development trends, in order to providereference for the further promotion of LLM in traditional medicine.

Objective:To investigate the efficacy and prognosis of CLAG±DAC (Clofarabine, Cytarabine, G-CSF±Decitabine) chemotherapy in patients with relapsed/refractory acute myeloid leukemia (R/R AML) .Methods:Continuous cases of R/R AML treated with the CLAG+DAC protocol or CLAG alone at the First Affiliated Hospital of Soochow University from January 2017 to December 2021 were retrospectively analyzed. The baseline characteristics, individual treatment regimen, treatment effect, disease progression, and survival status of patients were recorded. The factors influencing the efficacy of the CLAG±DAC chemotherapy regimens were analyzed, and the overall survival (OS) time after reinduction was calculated using the Kaplan-Meier method.Results:This study included a total of 53 patients, with 33 male patients and an average age of 40.6 years. Thirty-three patients achieved complete remission (CR+CRi) of the disease after the CLAG±DAC chemotherapy regimen and six patients achieved partial remission (PR), while 14 did not. Thirty-two patients eventually underwent hematopoietic stem cell transplantation, and the median OS of the patients was 55.9 months until follow-up. Patients with disease remission after the application of the CLAG±DAC chemotherapy had a significantly longer survival time than those without remission ( P<0.001). The results of the multifactorial analysis have revealed that combined DAC ( OR=4.60, 95% CI 1.14-23.5, P=0.04) and DNMT3A mutation ( OR=0.14, 95% CI 0.01-0.89, P=0.05) were the factors influencing the efficacy of the CLAG±DAC chemotherapy regimen. The remission rate was relatively higher in patients with R/R AML combined with FLT3-ITD mutation by applying the DAC+CLAG regimen ( OR=10.84, 95% CI 1.48-288.50, P=0.04) . Conclusion:The CLAG±DAC regimen is considered effective in patients with R/R AML, whereas decitabine combined with the CLAG regimen is more suitable for patients with R/R AML combined with FLT3-ITD mutation.

Objective To explore the relationship between anxiety sensitivity and psychological stress before parachuting training among parachuting trainees and the mediating role of resilience between them.Methods Anxiety sensitivity index scale(version 3),resilience scale,psychological stress self-evaluation test and self-compiled general information questionnaire were employed for 258 parachuting trainees before training.Pearson correlation analysis was used to analyze the correlations among anxiety sensitivity,resilience and psychological stress.A multiple linear regression analysis was conducted with anxiety sensitivity and resilience as independent variables and psychological stress as dependent variable to explore the relationships among these 3 factors.The mediating effect of resilience on the relationship between anxiety sensitivity and psychological stress was examined using the Hayes Process macro program and bias corrected non-parametric percentile Bootstrap method.Results Before parachuting training,the prevalence of psychological stress among parachuting trainees was 5.0%(13/258).The correlations between anxiety sensitivity,resilience and psychological stress were significant(all P＜0.01).Anxiety sensitivity was positively associated with psychological stress among parachuting trainees(b=0.412,t=7.062,P＜0.01),while resilience was negatively associated with psychological stress(b=-0.187,t=-3.722,P＜0.01).Anxiety sensitivity and resilience were found to explain 31.4%of the total variance.Resilience partially mediated the effect of anxiety sensitivity on psychological stress,accounting for 20.48%of the total effect.Conclusion Parachuting trainees are at a relatively low stress level,with good psychological adaptation.Resilience plays a partial mediating role in the association between anxiety sensitivity and psychological stress.More attention should be paid to parachuting trainees with high anxiety sensitivity,enhancing their resilience,and reducing psychological stress before parachuting training.

Objective To evaluate the second catalog of the key monitoring and rational use drugs(KMRUD),and to provide a reference framework for medical institutions to develop their own KMRUD catalogs and management policies.Methods A comprehensive search on official websites of national and provincial health administrative departments was conducted using the keywords"key monitoring","rational drug use",and"the second catalog".Announced catalogs and related policy documents pertaining to KMRUD use were collected and systematically organized.Comparative analyses were performed between the national KMRUD catalogs of the first and second batches,as well as between the second batch of provincial KMRUD catalogs and the national standard.Additionally,the adoption and variation of national KMRUD drug management policies across provinces,as well as the uniformity and divergence of provincial KMRUD management policies,were examined.Results The second national KMRUD catalog maintained 7 drug varieties from the first batch,eliminated 13,and introduced 23 new varieties.Of the 24 surveyed provinces,9 modified their provincial catalogs relative to the national second batch KMRUD catalog,resulting in alterations to 66 drug varieties within 10 Anatomical Therapeutic Chemical(ATC)classes,primarily systemic anti-infectives.Several provinces,including Xinjiang,Inner Mongolia,Liaoning,Shanghai,and Qinghai,implemented additional management measures such as the establishment of clinical application guidelines and the clarification of application conditions and principles.Moreover,provinces like Inner Mongolia,Shandong,Jilin,and Heilongjiang expanded their KMRUD management toolbox by developing drug monitoring indicators.The revision of inclusion rules from the first to the second KMRUD catalog has led to the incorporation of numerous essential clinical drugs.The prior protocol of medical institutions excluding drugs unilaterally is no longer viable,as it may disrupt the standard medication supply,potentially raising treatment costs.Conclusion Medical institutions ought to assimilate the updated implications of KMRUD use,draw on established provincial monitoring and management methodologies,enhance clinical application guidelines,and articulate conditions and principles for clinical use.Furthermore,by employing prescription review mechanisms,in-hospital monitoring,evaluation,and advanced warning systems,medical institutions can strategically oversee KMRUD use.

Objective To investigate the clinical application value of 3D printing technology in the treatment of complex posterior lateral tibial plateau fractures using the suprafibular approach. Methods A retrospective analysis was conducted on the clinical data of 67 patients with complex posterior lateral tibial plateau fractures treated with the suprafibular approach. Patients were divided into 3D printing group (35 cases) and conventional group (32 cases) based on whether 3D printing simulation surgery was used preoperatively. The operation time, intraoperative blood loss, and intraoperative fluoroscopy frequency were compared between the two groups. Postoperative complications such as incision infection, popliteal vessel injury, and common peroneal nerve injury were observed. Fracture healing time was recorded during follow-up, and Rasmussen scores were evaluated at 6 months postoperatively. The Hospital for Special Surgery (HSS) knee function score was assessed during the final follow-up. Results The follow-up duration for 67 patients was 14 to 22 months. One patient in each group developed postoperative incision infection, and no complications such as popliteal vessel injury, common peroneal nerve injury, or deep venous thrombosis of the lower extremity occurred. The operation time, intraoperative blood loss, and intraoperative fluoroscopy frequency were significantly lower in the 3D printing group than in the conventional group (P < 0.05). There were no significant differences in fracture healing time, Rasmussen scores at 6 months postoperatively, and HSS scores during the final follow-up between the two groups (P>0.05). Conclusion The application of 3D printing technology in the treatment of complex posterior lateral tibial plateau fractures using the suprafibular approach can optimize surgical plans, shorten operation time, and reduce intraoperative blood loss and fluoroscopy frequency.

Objective:To investigate the epidemic status and molecular characteristics of Borrelia burgdorferi in ticks in Xinjiang Uygur Autonomous Region (referred to as Xinjiang). Methods:From April to June 2020, 312 samples of Ixodes were collected in 6 areas of Yili, Alashankou, Hutubi, Qinghe, Fuhai and Wujiaqu, Xinjiang. Nested PCR and fluorescence quantitative PCR were used to detect Borrelia burgdorferi in ticks. The positive samples by both methods were genotyped and identified by nested PCR products. Results:The positive rates of nested PCR and fluorescence quantitative PCR were 8.97% (28/312) and 11.86% (37/312), respectively. Among them, the fluorescence quantitative PCR positive rate of Qinghe was the highest of 35.29% (12/34), and the positive rate of Fuhai was the lowest of 2.00% (1/50). The positive samples by both methods was 26. Genotyping results showed that 12 samples were highly homologous to Borrelia garinii, 10 copies to Borrelia burgdorferi sensu stricto, and 4 copies to Borrelia afzelii. Conclusions:The positive rate of Borrelia burgdorferi in ticks in Xinjiang is higher, which has confirmed that there are 3 pathogenic Borrelia burgdorferi genotypes in Xinjiang. The dominant genotype is Borrelia garinii, followed by Borrelia burgdorgferi sensu stricto genotype and Borrelia afzelii genotype.