Melatonin (Mel) has been shown to have cardioprotective effects, but its action on ion channels is unclear. In this experiment, we investigated the inhibitory effect of Mel on late sodium currents (I_Na.L) in mouse ventricular myocytes and the anti-arrhythmic effect at the organ level as well as its mechanism. The whole-cell patch clamp technique was applied to record the ionic currents and action potential (AP) in mouse ventricular myocytes while the electrocardiogram (ECG) and monophasic action potential (MAP) were recorded simultaneously in mouse hearts using a multichannel acquisition and analysis system. The results demonstrated that the half maximal inhibitory concentration (IC₅₀) values of Mel on transient sodium current (I_Na.T) and specific I_Na.L opener 2 nmol·L^-1 sea anemone toxins II (ATX II) increased I_Na.L were 686.615 and 7.37 μmol·L^-1, respectively. Mel did not affect L-type calcium current (I_Ca.L), transient outward current (I_to), and AP. In addition, 16 μmol·L^-1 Mel shortened ATX II-prolonged action potential duration (APD), suppressed ATX II-induced early afterdepolarizations (EADs), and significantly reduced the incidence of ventricular tachycardia (VT) and ventricular fibrillation (VF) in Langendorff-perfused mouse hearts. In conclusion, Mel exerted its antiarrhythmic effects principally by blocking I_Na.L, thus providing a significant theoretical basis for new clinical applications of Mel. Animal welfare and experimental process are in accordance with the regulations of the Experimental Animal Ethics Committee of Wuhan University of Science and Technology (2023130).

Objective:To investigate the molecular mechanism and distribution characteristics of RhD negative phenotypes in Han population of blood donors in Wuhu city.Methods:A total of 210 RhD-samples from August 2021 to August 2022 were screened by serological test and collected from Wuhu Central Blood Station for the voluntary blood donor population.Exons 1 and 10 of the RHD gene were amplificated by PCR to determine whether the samples had the RHD gene.Exons 1-10 of the RHD gene were amplificated by PCR and zygosity analysis were performed in 82 samples containing D gene,and Sanger sequencing was performed on 55 samples containing all RHD exons to determine the genotype.Results:Among 210 RhD-specimens,128 cases(60.38％)had RHD gene deletion.27 cases had partial exons of RHD,including 2 cases with RHD*DVI.3/RHD*01N.01,24 cases with RHD*01N.04/RHD*01N.01,and 1 case with RHD-CE(2-10)/RHD*01N.01.55 cases had retained all of 10 exons,including 4 cases with RHD*01/RHD*01N.01,6 cases with RHD*15/RHD*01N.01,1 case with RHD*01W.72/RHD*01N.01,1 case with RHD*15/RHD*01EL.01,39 cases with RHD*01EL.01/RHD*01N.01,and the remaining 4 cases were determined to have no RHD gene deletion by zygosity analysis and sequencing showed the presence of 1227G＞A mutation loci.Conclusion:There is polymorphism in the molecular mechanism of RhD-D gene in Wuhu blood donor population,among which RHD*01EL.01 and RHD*15 are the main variants in this region.The results of this study provide a theoretical basis for RhD blood group identification and clinical blood transfusion in this region.

Objective To solve the problem of large data volume,multiple dimensions and low value for assisting traditional Chinese medicine clinical diagnosis in home health perception layer devices.Methods Based on the principles of traditional Chinese medicine diagnosis,this paper divides home health data into three types:complementary,redundant,and collaborative,and proposes a solution for data fusion at the levels of device data,home events,and traditional Chinese medicine symptoms.Results The proposed data fusion solution in this paper enables the data collected by various devices in the home environment to work together,extracts home data that is more valuable for traditional Chinese medicine diagnosis,and reduces the real-time pressure on the home network bandwidth caused by the sensors on the home side.Conclusion The construction of an open IoT ecosystem for home health based on multiple devices is a huge project,which includes the construction of perception layer hardware,data cleaning,fusion,normalization,labeling,modeling,and other aspects.This paper focuses on the idea of home health data fusion,which can provide directions for cleaning up heterogeneous data from multiple sources at home and also provide ideas for subsequent data labeling and modeling with traditional Chinese medicine characteristics,thus providing more valuable decision-making assistance for traditional Chinese medicine clinical practice.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Objective: This study aimed to evaluate the effects of 2 endoscopic spine surgeries on the biomechanical properties of normal and osteoporotic spines. Methods: Based on computed tomography images of a healthy adult volunteer, 6 finite element models were created. After validating the normal intact model, a concentrated force of 400 N and a moment of 7.5 Nm were exerted on the upper surface of L3 to simulate 6 physiological activities of the spine. Five types of indices were used to assess the biomechanical properties of the 6 models, range of motion (ROM), maximum displacement value, intervertebral disc stress, maximum stress value, and articular protrusion stress, and by combining them with finite element stress cloud. Results: In normal and osteoporotic spines, there was no meaningful change in ROM or disc stress in the 2 surgical models for the 6 motion states. Model N1 (osteoporotic percutaneous transforaminal endoscopic discectomy model) showed a decrease in maximum displacement value of 20.28% in right lateral bending. Model M2 (unilateral biportal endoscopic model) increased maximum displacement values of 16.88% and 17.82% during left and right lateral bending, respectively. The maximum stress value of L4–5 increased by 11.72% for model M2 during left rotation. In addition, using the same surgical approach, ROM, maximum displacement values, disc stress, and maximum stress values were more significant in the osteoporotic model than in the normal model. Conclusion In both normal and osteoporotic spines, both surgical approaches were less disruptive to the physiologic structure of the spine. Furthermore, using the same endoscopic spine surgery, normal spine biomechanical properties are superior to osteoporotic spines.

Abstract: Objective　To develop a real-time fluorescent quantitative RT-PCR (qRT-PCR) method for qualitative and quantitative Chikungunya virus (CHIKV) analysis. Methods Based on the systematic analysis of the genomic sequences of Chikungunya and its related arboviruses, the specific nucleic acid sequences for Chikungunya virus were screened and identified, and then the primers and TaqMan probe were designed. Meanwhile, the human GAPDH gene was used as an internal reference. The reaction system for qRT-PCR was systematically optimized by L9(34) orthogonal design, and a rapid detection method for Chikungunya by qRT-PCR based on TaqMan probe methods was established. The sensitivity, specificity, reproducibility, and coverage of the established method were analyzed in detail. The standard curve was made, and the absolute quantitative method was established using the cloned nucleic acid fragments as positive samples. Results　A real-time fluorescent quantitative RT-PCR assay was developed for the qualitative and quantitative analysis of Chikungunya virus. The reaction system included Chikungunya virus and reference internal gene specific primers and probe, RT/Taq enzyme mixture, reaction buffer, and negative and positive reference. The established method obtained positive results with the ROSS strain of ECSA subtype, LR2006 strain of IOL branch, 181/25 strain of Asian type and Dongguan 2010 epidemic strains of Chikungunya virus, but there was no cross-reaction with other 18 arboviruses belonging to Flaviviruses, Alphaviruses and Bunyavirus. The minimum detection limit of the established method was 5.80 copies/mL, and a linear relationship was observed between the amount of input plasmid DNA and fluorescence signal value over a range of 5.80×102 copies/mL to 5.80×1010 copies/mL, and the correlation coefficient was 0.999 5. The qRT-PCR amplification efficiency was 91%, and the intra-assay variations and inter-assay variations were 0.01-0.07 and 0.03-0.11, respectively. Conclusions　The TaqMan qRT-PCR method developed in this study can qualitatively and quantitatively detect Chikungunya virus rapidly with specificity and sensitivity, providing a technical method for the prevention and control of this viral disease.

Pregnancy ; Female ; Humans ; Milk, Human ; Overweight/genetics* ; Fatty Acids, Unsaturated ; Fatty Acids ; Adiponectin/genetics*