Based on the interaction between supramolecule of traditional Chinese medicine and enterobacteria, the material basis of Rhei Radix et Rhizoma and Coptidis Rhizoma was explored. Scanning electron microscopy (SEM) and dynamic light scattering (DLS) were used to characterize the morphological differences of Rhubarb single decoction, Coptis single decoction and Rhubarb and Coptis co-decoction. An in vitro antibacterial model (E. coli, E. faecium and B. subtilis) was established to evaluate the damage effect of the combination of Rhei Radix et Rhizoma and Coptidis Rhizoma on enterobacteria. Ultra high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was used to analyze the changes of chemical components of single decoctions and co-decoctions. The co-decoction of Rhei Radix et Rhizoma and Coptidis Rhizoma was turbid after decocting. The spherical particles of 300-400 nm were observed under SEM, and the co-decoction was more uniform and stable than that of single decoction. The interaction between supramolecules formed after the combination of Rhei Radix et Rhizoma and Coptidis Rhizoma and enterobacteria was significantly different from that of single decoction. In the process of interaction between supramolecules and enterobacteria, the spherical state was maintained, and the medicinal ingredients in Coptidis Rhizoma or Rhei Radix et Rhizoma were blocked, which could effectively alleviate the damage to enterobacteria. This study provided a reference for subsequent studies on the regulation of intestinal flora homeostasis by the combination of Rhei Radix et Rhizoma and Coptidis Rhizoma.

Based on the literature study,the thoughts and possible therapeutic mechanism in treating male infertility from the perspective of spleen and kidney by regulating intestinal flora were explored.Disturbance of intestinal flora is one of the important factors leading to the development of male infertility,and the spleen and kidney have certain similarities to intestinal flora in the physiological function and pathological changes.Moreover,tonifying the kidney and strengthening the spleen can regulate the intestinal flora by fostering the growth of beneficial bacteria,inhibiting the reproduction of pathogenic bacteria,and protecting the barrier of the intestinal mucosa.Therefore,the possible therapeutic mechanisms in treating male infertility with the prescriptions for tonifying the kidney and strengthening the spleen to regulate intestinal flora are as follows:inhibiting the expression of inflammatory factors to reduce the inflammatory reaction of testicular tissues;improving the antioxidant capacity to alleviate the damage of spermatozoa caused by oxidative stress,and improving the bad mood to alleviate the impact of psychological stress on the reproductive system.The exploration of the thoughts for treating male infertility from the perspective of spleen and kidney by regulating intestinal flora may provide a new entry point for modern Chinese medicine clinical treatment of male infertility.

BACKGROUND:Three-dimensional(3D)printing is an emerging technology in the field of dentistry.It utilizes a layer-by-layer manufacturing technique to create scaffolds suitable for periodontal tissue engineering applications.Tissue scaffolds produced through 3D printing can possess controlled characteristics,including internal structure,porosity,and interconnectivity,making it an ideal strategy for periodontal tissue engineering. OBJECTIVE:To review the applications of 3D printed scaffolds in periodontal regeneration. METHODS:English search terms were"3D printing,periodontal tissue engineering,additive manufacturing,regenerative medicine,bioengineering,scaffold,bioprinting,periodontitis".Chinese search terms were"3D printing,additive manufacturing,periodontal tissue engineering,scaffolds,bio-inks,bioprinting,tissue engineering".Relevant literature published from 2000 to 2023 in PubMed and CNKI databases was retrieved and included in the review. RESULTS AND CONCLUSION:Over the past few decades,3D printing technology has made significant progress and breakthroughs in tissue engineering and biomedical fields.3D printing technology can provide highly personalized treatment programs,improve the suitability and therapeutic effect of therapeutic stents,and has broad application prospects in periodontal tissue engineering.In periodontal tissue engineering,3D printing applications can better mimic the complex structures of biological tissues and manufacture biocompatible scaffold materials with suitable mechanical and rheological properties.The layer-by-layer construction of tissue engineering scaffolds through 3D printing not only enables the creation of precise and intricate scaffold models for personalized treatment of periodontal disease but also facilitates the incorporation of complex microstructures and channels within the scaffolds to promote cell growth and tissue regeneration.

Temporomandibular joint (TMJ) diseases are common clinical conditions. The number of patients with TMJ diseases is large, and the etiology, epidemiology, disease spectrum, and treatment of the disease remain controversial and unknown. To understand and master the current situation of the occurrence, development and prevention of TMJ diseases, as well as to identify the patterns in etiology, incidence, drug sensitivity, and prognosis is crucial for alleviating patients′suffering.This will facilitate in-depth medical research, effective disease prevention measures, and the formulation of corresponding health policies. Cohort construction and research has an irreplaceable role in precise disease prevention and significant improvement in diagnosis and treatment levels. Large-scale cohort studies are needed to explore the relationship between potential risk factors and outcomes of TMJ diseases, and to observe disease prognoses through long-term follw-ups. The consensus aims to establish a standard conceptual frame work for a cohort study on patients with TMJ disease while providing ideas for cohort data standards to this condition. TMJ disease cohort data consists of both common data standards applicable to all specific disease cohorts as well as disease-specific data standards. Common data were available for each specific disease cohort. By integrating different cohort research resources, standard problems or study variables can be unified. Long-term follow-up can be performed using consistent definitions and criteria across different projects for better core data collection. It is hoped that this consensus will be facilitate the development cohort studies of TMJ diseases.

Connectomics, a research field in neuroscience studying the synaptic connectivity patterns between neurons across different brain regions, is crucial for understanding neural computations underlying complex functions such as emotion, learning, and cognition. Specifically, micrometer-resolution mesoscale connectomics has become the most widely used technology in rodent neuroscience due to its unique advantages, and it also has the potential to transform brain research in non-human primates. Traditional mesoscale connectome techniques typically use fluorescence labeling and optical imaging to perform anterograde or retrograde tracing of neural circuits. To achieve single-cell resolution, methods for sparse labeling of neurons have been developed. However, it remains challenging to trace neurons in high throughput in individual animals and integrate multi-omics data across modalities. In the past decade, high-throughput mesoscale connectome technologies based on DNA barcoding have made significant progress. These technologies have provided novel tools to map single cell connectome, with higher throughput, lower cost, and multi-omics compatibility. Here we review several mature mesoscale connectome technologies based on DNA barcoding, discussing their principles, applications, advantages and disadvantages. We also propose future directions for barcoding-based connectomics.

Licorice-gypsum (gancao-shigao, GC-SG) drug pair was used as the research object, using supramolecular chemistry to explore the scientific connotation of combining herbal medicine GC with insoluble mineral medicine SG in clinical application of traditional Chinese medicine. ① The Tyndall effect, microscopic morphology and particle size of the single and co-decocted of GC and SG were observed, the paste content and conductivity were determined, and the interaction between GC and SG was detected by isothermal titration calorimetry (ITC) and infrared absorption spectroscopy (IR). ② Calcium chloride (CaCl₂), a soluble calcium salt of equal gypsum quality, was used instead of SG with GC for co-decocting to explore the effect of calcium salt content on the water decocting, and the characteristics were combined with the Tyndall effect, microscopic morphology, paste content and conductivity. ITC and IR techniques were used to detect the interaction between the two, and the interaction between them was detected by ITC and IR. The zeta potential and ultraviolet-visible spectrophotometry (UV-vis) of GC-SG and GC-CaCl₂ co-decoction were compared, and the inorganic and organic components in the co-decoction were detected by inductively coupled plasma optical emission spectrometer (ICP-OES) and high performance liquid chromatography (HPLC). The results showed: ① Compared with the liquid phase of single decoction, GC-SG co-decoction had more obvious Tyndall effect, and showed uniform spherical nanoparticles under electron microscope. Physical characterization results such as paste content and conductivity showed that co-decoction promoted the dissolution of each other's components; ITC and IR results showed that there was strong interaction between GC and SG, which preliminatively indicated that GC and SG co-decoction promoted the formation of uniform and stable supramolecular system of traditional Chinese medicine. ② When soluble calcium salt was used to substitute insoluble SG with GC for co-decocting, a stronger but astigmatic light path appeared than single decocting solution, the zeta potential was reduced, and a large number of accumulated polymers were formed. The results of paste content and conductivity showed that the dissolution of the co-decocting component was reduced than the single decocting component. ITC, UV-vis and IR results showed that there was interaction between GC with Ca²⁺ and SG. The formation of polysink indicated that a large amount of soluble calcium salt would destroy the stability of supramolecular Chinese medicine. The results of ICP-OES and HPLC showed that the glycyrrhizic acid (GA) content of the former lower than the latter, which was related to the formation of a large number of polycondensates with the increase of Ca²⁺ concentration and the decrease of the dissolution of GA and other active ingredients. This study indicates that the compatibility of GC and SG can form a uniform and stable supramolecular system of traditional Chinese medicine. Calcium salt, the main component of SG, is taken as the starting point. Excessive soluble Ca²⁺ can promote the aggregation of active ingredients such as GA, so as to reveal the scientific connotation of the compatibility of GC and SG, an insoluble mineral medicine.

The effect of different concentrations of glycyrrhizic acid (GA) and Zn²⁺ on the self-assembly of metal complexes was investigated by forming metal complexes, and the properties and assembly mechanisms of the formed carrier-free supramolecular hydrogel were characterised. Scanning electron microscopy (SEM) and zeta potential were used to characterise the microscopic morphology and stability of the GA-Zn complex hydrogel, which had spherical-like particles of about 1 μm with good stability; the rheometer was used to detect its materialistic properties, which showed excellent stability, self-healing property and reversibility; through in vitro bacterial inhibition, it was found that the GA-Zn carrier-free supramolecular hydrogel has enhanced bacterial inhibition function after assembly. The hydrogel was also found to possess both anti-inflammatory and antioxidant efficacy when evaluated using LPS and H₂O₂ induced RAW 264.7 cell damage models, respectively. The above results suggest that GA-Zn hydrogel not only has good materialistic properties, but also possesses good antibacterial, anti-inflammatory and antioxidant activities, which has the value of clinical research as a carrier-free multi-functional antimicrobial dressing, and the present study provides a reference for the discovery of novel biomedical materials from active molecules of natural traditional Chinese medicine.

Aim To compare the pharmacokinetics of pemirolast potassium tablets in healthy subjects in Chi-na under single fasting and postprandial conditions,and to evaluate the bioequivalence of the test prepara-tion(T)and the reference preparation(R).Methods A randomized,open-ended,single-dose,two-cycle,double-cross bioequivalence trial design was adopted,and 26 and 30 subjects were enrolled in the fasting group and the postprandial group,respectively,and 10 mg of the test preparation and the reference preparation were taken in the fasting or postprandial state each cy-cle,and venous blood was collected at the designed time points before and after the administration cycle.The concentration of pemirolast potassium in plasma was determined by LC-MS/MS method,and the phar-macokinetic parameters were calculated with PhoenixTM WinNonlin ?(8.3)software,and the bioequivalence analysis of the two preparations was performed.Re-sults The t1/2 of the test preparation and the reference preparation was(4.44±0.91)h and(4.49±0.93)h,respectively;the median tmax was(1.96±1.29)h and(2.18±1.25)h,respectively;the Cmax was(867.12±205.56)μg·L-1 and(863.35±172.03)μg·L-1,respectively;the AUC0-t was(5 513.23±1463.67)h·μg·L-1 and(5 661.32±1 628.65)h·μg·L-1,respectively;AUC0_∞ was(5 699.81±1477.68)h·μg·L-1 and(5 849.44±1 644.75)h·μg·L-1,respectively.The statistical results of the 90％confidence intervals of the main pharmacokinetic parameters Cmax,AUC0-t,and AUC0-∞ was 92.49％～107.53％,94.71％～100.67％and 95.28％～100.27％,respectively,all of which were within the range of 80.00％～125.00％,and the safety of the tested preparation and the reference preparation was good when taken orally on an empty stomach.The t1/2 of single oral administration after prandial administra-tion of the tested preparation and the reference prepara-tion was(4.46±0.78)and(4.51±0.84)h,respec-tively;the median tmax was(3.08±1.36)h and(3.28±1.28)h,respectively;the Cmax was(683.83±111.87)μg·L-1 and(689.77±110.24)μg·L-1,respectively;the AUC0-t was(5 695.99±1566.05)h·μg·L-1 and(5 773.60±1 551.04)h·μg·L-1,respectively;the AUC0-∞ was(5 914.06±1 551.86)h·μg·L-1 and(5 967.30±1552.89)h·μg·L-1,respectively.The 90％confi-dence interval of Cmax,AUC0-t,and AUC0-∞ was 93.56％～104.69％,96.43％～100.83％,and 97.29％～101.14％,respectively,which was in the range of 80.00％～125.00％,and the safety of the tested preparation and the reference preparation was good after meals.Conclusion In the state of fasting and postprandial single oral administration,the two kinds of pemirolast potassium tablets have good bio-equivalence.

A corresponding calibration method was proposed for the key performance parameters of the endoscopic liquid expansion pump,such as the pressure indication error,the flow rate indication error and the flow rate repeatability.4 different brands of endoscopic liquid expansion pumps in clinical use in the hospital were selected for calibration,and the feasibility of the calibration method was evaluated.In the pressure and flow range of the endoscope liquid expansion pump,3 calibration points of high,medium and low were selected,and each flow point was calibrated 3 times.The calibration results showed that the maximum error of pressure indication was 4.3%,the maximum error of flow indication was 9.3%,and the maximum repeatability of flow indication value was 0.8%,all of which met the technical requirements for the maximum allowable error of"Medical Endoscopes.Endoscope Functional Supply Units.Irrigation Pump"(YY/T 0864-2011)and"Calibration Specification for Syringe Pumps and Infusion Pumps"(JJF 1259-2018).The calibration method for endoscopic liquid expansion pump can improve the metrological traceability system of this type of equipment,ensure the accuracy and reliability of equipment values,improve product quality,and ensure medical safety.

Objective To investigate the intrinsic neural mechanism of aggressive behavior in CD 1 mice.Methods CD1 mice with aggressive behavior were screened out by resident intruder test.After the aggressive conditioned pair preference was further verified,the activated brain regions of the whole brain were labeled with c-Fos,and the types of neurons activated by the aggressive behavior were analyzed by double immunofluorescence labeling.Finally,the effects of activity of these neurons regulated by optogenetics on aggressive behavior were observed.Results The c-Fos screening revealed that about 82％of the CD1 mice showed aggressive behavior.After the occurrence of aggressive behavior,the main activation occured in the medial prefrontal cortex(mPFC),and the results of immunofluorescence double labeling showed that the c-Fos positive neurons in the mPFC were mainly glutamatergic neurons.Finally,glutamatergic neurons in the mPFC could be activated by optogenetics,and the activation inhibited the aggressive behavior of CD1 mice.In contrast,optogenetics could inhibit glutamatergic neurons in the mPFC and then promote the aggressive behavior of CD1 mice.Conclusion Glutamatergic neurons in the mPFC are an important component in the regulation of aggressive behavior in CD1 mice.