Objective To investigate the feasibility of the spatiotemporal filtering model in analysis of reported schistosomiasis cases, so as to provide insights into analysis of complicated data pertaining to schistosomiasis control. Methods Demographic and epidemiological data of reported schistosomiasis cases in Anhui Province from 1997 to 2010 were collected from Anhui Provincial Center for Disease Control and Prevention, and the annual prevalence of Schistosoma japonicum human infections was calculated. The meteorological data were captured from meteorological stations in counties (cities, districts) of Anhui Province where schistosomiasis cases were reported from 1997 to 2010 at the National Meteorological Information Center, including monthly average air temperature and precipitation. Meteorological data were interpolated using the inverse-distance weighting method, and the annual average air temperature and annual precipitation were calculated in each county (city, district). The centroid of the county (city, district) where schistosomiasis cases were reported was extracted using the software ArcGIS 10.0, and the Euclidean distance from each centroid to the Yangtze River was calculated as the distance between that county (city, district) and the Yangtze River. The global Moran’s I of the prevalence of S. japonicum human infections in Anhui Province for each year from 1997 to 2010 were calculated to analyze the spatial autocorrelation. A spatial weight matrix was constructed using Rook adjacency, and a first-order temporal weight matrix was built to quantify the relationship between disease changes over time. Subsequently, a spatiotemporal structure matrix was constructed. A negative binomial model was built based on the spatiotemporal structure matrix and data pertaining to reported schistosomiasis cases, and a linear model was created between the residual of the model and candidate set feature vectors to determine the optimal subset composition of the spatiotemporal filter through stepwise regression. Then, a spatio-temporal filtering model was constructed using the negative binomial model. Negative binomial models, Bayesian spatial models, and Bayesian spatiotemporal models were constructed and compared with the spatiotemporal filtering model to validate the performance of the spatiotemporal filtering model, and cross-validation was conducted for each model. The goodness of fit was evaluated using the deviance information criterion (DIC) and Watanabe-Akaike information criterion (WAIC), and the effectiveness of model validation was assessed using mean squared error (MSE), while the accuracy of assessment results was assessed using coefficients and their 95% confidence intervals (CI), and the computational efficiency was assessed based on the running time of the model. The four feature vectors with the largest Moran’s I values were selected to identify regions with autocorrelation through their schematic diagrams to investigate the differences in spatiotemporal patterns of specific regions. Results Of all models created, the spatiotemporal filtering model exhibited the highest goodness of fit (DIC = 3 240.70, WAIC = 3 257.80), the best model validation effectiveness (MSE = 42 617.52), and the runtime was 3.18 s, exhibiting the optimal performance. Across all modeling results, the distance from the Yangtze River showed a negative correlation with the number of reported schistosomiasis cases (coefficient values = −4.93 to −3.78, none of the 95% CIs included 0), and annual average air temperature or average precipitation posed no significant effects on numbers of reported schistosomiasis cases (both of the 95% CIs included 0). Schematic diagrams of feature vectors showed that the transmission of schistosomiasis might be associated with water systems in Anhui Province, and localized clustering patterns were primarily concentrated in the northern and western parts of schistosomiasis-endemic areas in the province. Conclusion The spatiotemporal filtering model is an effective spatiotemporal analysis characterized by simple modeling, user-friendly operation, accurate results and good flexibility, which may serve as an efficient alternative to conventional complex spatiotemporal models for data analysis in schistosomiasis researches.

Osteoporosis is a common bone disease， whose incidence is still on the rise， posing great challenges to patients and society. This review mainly studies the pathogenesis of osteoporosis from the aspects of oxidative stress， inflammatory response， and glucolipotoxicity-induced injury and clarifies the efficacy and mechanism of some active ingredients of traditional Chinese medicine against osteoporosis through the integration of in vitro and in vivo experiments. The experimental results suggest that some active ingredients can improve bone resorption markers and maintain bone homeostasis by modulating inflammation， oxidative stress， etc. These active ingredients regulate osteoporosis through the receptor activator of nuclear transcription factor-κB （NF-κB） ligand （RANKL） pathway， osteoprotegerin （OPG） pathway， Wnt/β-catenin pathway， NF-κB pathway， mitogen-activated protein kinase （MAPK） pathway， adenosine monophosphate （AMP）-activated protein kinase （AMPK）/mammalian target of rapamycin （mTOR） pathway， and oxidative stress pathway. This review provides ideas for the progress of the prevention and treatment of osteoporosis with the active ingredients of traditional Chinese medicine， aiming to provide new potential lead compounds and reference for the development of innovative drugs and clinical therapy for the treatment of osteoporosis.

BACKGROUND:Cervical disc herniation can cause pain in the neck and shoulder area,as well as radiating pain in the upper limbs.The incidence rate is increasing year by year and tends to affect younger individuals.Fully understanding the biomechanical characteristics of the cervical spine in adolescents is of great significance for preventing and delaying the onset of cervical disc herniation in this age group. OBJECTIVE:To reconstruct cervical spine models for both healthy adolescents and adolescent patients with cervical disc herniation utilizing finite element analysis techniques,to analyze the motion range of the C1-T1 cervical vertebrae as well as the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and the cartilage of the small joints. METHODS:A normal adolescent's cervical spine and an adolescent patient with cervical disc herniation were selected in this study.The continuous scan cervical spine CT raw image data were imported into Mimics 21.0 in DICOM format.The C1-T1 vertebrae were reconstructed separately.Subsequently,the established models were imported into the 3-Matic software for disc reconstruction.The perfected models were then imported into Hypermesh software for meshing of the vertebrae,nucleus pulposus,annulus fibrosus,and ligaments,creating valid geometric models.After assigning material properties,the final models were imported into ABAQUS software to observe the joint motion range of the C1-C7 cervical vertebrae segments under different conditions,and to analyze the biomechanical characteristics of the annulus fibrosus,nucleus pulposus,endplates,and small joint cartilage of each cervical spine segment. RESULTS AND CONCLUSION:(1)In six different conditions,the joint motion range of the C1 vertebra in the cervical spine models of both normal adolescent and adolescent patient with cervical disc herniation was higher than that of the other vertebrae.Additionally,the joint motion range of each cervical spine segment in normal adolescent was greater than that in adolescent patient with cervical disc herniation.(2)In the cervical spine model of normal adolescent,the maximum stress values in the annulus fibrosus and nucleus pulposus were found on the left side during C2-3 flexion conditions(0.43 MPa and 0.17 MPa,respectively).In the cervical spine model of adolescent patient with cervical disc herniation,the maximum stress values were found on the left side during C7-T1 flexion conditions(0.54 MPa and 0.18 MPa,respectively).(3)In the cervical spine model of normal adolescent,the maximum stress value on the endplate was found on the left side of the upper endplate of C3 during flexion conditions(1.46 MPa).In the model of adolescent patient with cervical disc herniation,the maximum stress value on the endplate was found on the left side of the lower endplate of C7 during flexion conditions(1.32 MPa).(4)In the cervical spine model of normal adolescent,the maximum stress value in the small joint cartilage was found in the C2-3 left rotation conditions(0.98 MPa).In adolescent patient with cervical disc herniation,the stress in the small joint cartilage significantly increased under different conditions,especially in C1-2,with the maximum stress found during left flexion(3.50 MPa).(5)It is concluded that compared to normal adolescent,adolescent patient with cervical disc herniation exhibits altered cervical curvature and a decrease in overall joint motion range in the cervical spine.In adolescent with cervical disc herniation,there is a significant increase in stress on the annulus fibrosus,nucleus pulposus,and endplates in the C7-T1 segment.The stress on the left articular cartilage of the C1-2 is notable.Abnormal cervical curvature may be the primary factor causing these stress changes.

To investigate the awareness of cognitive impairment disorders among residents of the Xizang Autonomous Region and its influencing factors, thereby providing a basis for targeted prevention and treatment efforts.

Objective:To investigate the nutritional risk, incidence of malnutrition, and intake of three major energy-supplying nutrients, analyze changes in their body composition and the possible influencing factors in patients with stomach neoplasms during perioperative period in order to provide a theoretical basis for the nutritional management of patients with stomach neoplasms during perioperative period.Methods:This was a cross-sectional study. A total of 105 patients who underwent gastric cancer radical surgery in the Gastrointestinal Department of Zhongshan Hospital Affiliated to Xiamen University from June 2021 to May 2023 were taken as the research subjects using fixed-point continuous sampling method. They were recruited for screening and assessment using Nutritional Risk Screening 2002 (NRS 2002) and Patient-Generated Subjective Global Assessment (PG-SGA). Nutrients intake during the perioperative period were investigated using the 24-h recall method and dietary diary method, etc. Body compositions were measured using the bioelectrical resistance method.Results:Among the 105 patients, there were 78 males and 27 females, with an average age of (61.5 ± 10.3) years. About 83.8% (88/105) gastric cancer patients were at nutritional risk and 82.9% (87/105) were malnourished. The preoperative and postoperative energy intake were (1 646.1 ± 321.5) and (1 317.2 ± 365.8) kcal (1 kcal=4.184 kJ), respectively, which were significantly lower than the target amount of (1 896.7 ± 262.9) kcal, the difference was statistically significant ( t=6.23, 8.29, both P<0.05).The preoperative body mass, muscle mass, skeletal muscle, fat mass, and skeletal muscle index were (51.5 ± 9.6), (40.8 ± 6.0), (23.6 ± 4.0), (8.3 ± 4.9) kg, and 6.7 ± 0.8 respectively, while the postoperative values were (50.0 ± 9.1), (39.8 ± 6.0), (22.8 ± 3.6), (7.8 ± 5.2) kg, and 6.5 ± 0.8 respectively, with statistically significant differences between the two groups ( t values were 2.89-10.61, all P<0.05). Logistic multivariate regression analysis showed that the operation time ( OR=3.984, 95% CI 1.433-11.080, P<0.05) and energy satisfaction ( OR=0.053, 95% CI 0.005-0.610, P<0.05) were independent influencing factors for the degree of skeletal muscle loss. Conclusions:During perioperative period, the gastric cancer patients had poor nutritional status with insufficient nutrient intake and accelerated loss of body muscle and fat. Therefore, it was necessary to conduct a comprehensive nutritional evaluation for patients with stomach neoplasms during perioperative period in time and take steps to promote recovery by providing individualized nutritional therapy.

BACKGROUND:A previous study by our group found that protein phosphatase 2Cm(PP2Cm)null mice developed significantly fewer symptoms of renal failure relative to wild-type mice,and thus it was speculated that PP2Cm may play an important protective role in the development of renal fibrosis,however,the molecular mechanisms remain undefined. OBJECTIVE:To investigate the effect of the PP2Cm gene on the transcriptome of human renal tubular epithelial cells. METHODS:Cultured human renal tubular epithelial cells were transfected with the PP2Cm gene into human renal tubular epithelial cells using plasmids.The expression of PP2Cm in the cells was detected by fluorescence quantitative PCR assay and western blot assay,and subsequently,cell RNA was separately extracted for transcriptome sequencing to look for differentially expressed genes between transfected and control groups.The resulting differential genes were further subjected to GO analysis and KEGG analysis using bioinformatics methods. RESULTS AND CONCLUSION:There were 796 differentially expressed genes,553 of which were downregulated genes and 243 upregulated genes,in human renal tubular epithelial cells transfected with the PP2Cm gene compared with untransfected blank cells by sequencing analysis.GO analysis results showed that the upregulated genes were significantly enriched in cellular biosynthetic processes,protein translation,intrinsic apoptotic signaling pathways,and so on.The downregulated expressed genes were significantly enriched in endothelial cell proliferation,cell adhesion and other signaling pathways.KEGG analysis results showed that the significantly up-regulated genes were enriched in metabolism-related signaling pathways such as amino acid metabolism and biosynthesis.The downregulated expressed genes were significantly enriched in signaling pathways such as pantothenate and coenzyme A biosynthesis.Our results show that PP2Cm overexpression can affect a number of signaling pathways related to a range of biological processes in renal tubular epithelial cells,which may be important in metabolism-related signaling pathways such as amino acid metabolism and biosynthesis.

BACKGROUND:Ankylosing spondylitis is a chronic inflammatory disease with chronic rheumatic immunity.Soft tissue ossification and fusion and spinal stiffness can cause biomechanical changes. OBJECTIVE:To reconstruct the lumbar-sacral intervertebral disc in ankylosing spondylitis patients with lumbar kyphosis by finite element analysis,and to study the range of motion of each segment of T11-S1 and the biomechanical characteristics of annulus fibrosus and nucleus pulposus. METHODS:The imaging data were obtained from an ankylosing spondylitis patient with lumbar kyphosis.The original CT image data of continuously scanned spine were imported into Mimics 21.0 in DICOM format,and T11-S1 was reconstructed respectively.The established model was imported into 3-Matic software in the format of"Stl"to reconstruct the intervertebral disc,and the fibrous intervertebral disc model was obtained.The improved model was further imported into Hypermesh software,and the vertebra,nucleus pulposus,annulus fibrosus and ligament were mesh-divided.After the material properties were given,the model was imported into ABAQUS software to observe the range of motion of each vertebral body in seven different working conditions of T11-S1,and analyze the biomechanical characteristics of each segment of annulus fibrosus and nucleus pulposus. RESULTS AND CONCLUSION:(1)The range of motion of L1 vertebrae was higher than that of other vertebrae under six different working conditions:extension,forward flexion,rotation(left and right),and lateral flexion(left and right).The maximum range of motion was 2.18° during L1 vertebral flexion,and the minimum range of motion was 0.12° during L5 vertebral extension.(2)The annular fiber flexion at L2-L3 segments was greater than the extension(P<0.05),and the annular fiber flexion at L3-L4 and L4-L5 segments was less than the extension(P<0.05).The left rotation of L1-L2 annular fibers was greater than the right rotation(P<0.05).The left flexion of the annulus was greater than the right flexion in L1-L2,L2-L3,L3-L4,L4-L5 and L5-S1 segments(P<0.05).(3)The nucleus pulposus stresses of T11-L12,L1-L2,L2-L3,L3-L4 and L4-L5 segments in forward flexion were greater than in extension(P<0.05).The left rotation of T12-L1 and L3-L4 segments was smaller than the right rotation(P<0.05),and that of T11-T12,L1-L2,and L2-L3 segments was larger than the right rotation(P<0.05).The left flexion was larger than the right flexion in the T11-S1 segment.(4)It is concluded that in ankylosing spondylitis patients with lumbar kyphosis,the minimum range of motion of the vertebral body is located at the L5 vertebral body in extension.To prevent fractures,it is recommended to avoid exercise in the extension position.During the onset of lumbar kyphosis in patients with ankylosing spondylitis,the maximum stress of the annulus fibrosus and nucleus pulposus is located in the L1-L2 segment,which is fixed and will not alter with the change of body position.The late surgical treatment and correction of deformity should focus on releasing the pressure of the annulus fibrosus and nucleus pulposus in this segment to avoid the rupture of the annulus fibrosus and the injury of the nucleus pulposus.

Programmed cell death protein-1(PD-1)/programmed cell death ligand-1(PD-L1)has been considered to be one of the most promising targets for tumor immunotherapy.At present,both monoclonal antibody drugs and small molecule inhibitors targeting PD-1/PD-L1 are facing bottlenecks.Numerous researchers have tried to explore different strategies to block the PD-L1/PD-L1 pathway,hoping to improve the effects of tumor immunotherapy.This review focuses on the degraders,bifunctional molecules and covalent inhibitors that target PD-L1,aiming to provide inspiring insights for the development of anti-PD-1/PD-L1 drugs.

BACKGROUND:The study of the physical properties of scaffolds has always been a hot topic in the field of tissue engineering research.However,for vascular stimulating scaffolds,in addition to meeting the basic performance of the scaffold,other methods are also needed to promote the regeneration of blood vessels within the scaffold,in order to achieve the ultimate goal of repairing bone tissue. OBJECTIVE:A visualization analysis was carried out on the literature published in and outside China on scaffold stimulation for bone tissue engineering,to explore the research hotspots and research status in this field,and to provide a reference for subsequent studies. METHODS:Using the CNKI database and Web of Science core database as retrieval databases,the relevant literature on vascular scaffolds for bone tissue engineering was retrieved.The literature that did not conform to the research object was removed.The obtained data were imported into CiteSpace 6.1.R2 software.Visualization analysis was performed on authors,national institutions,and keywords in the research field. RESULTS AND CONCLUSION:(1)China,the United States,and Germany were the top three countries with the most articles on scaffold stimulation for bone tissue engineering.(2)The top 3 institutions in the CNKI database were Southern Medical University,Huazhong University of Science and Technology,and Donghua University.In the core database of Web of Science,Shanghai Jiao Tong University,Sichuan University and Chinese Academy of Sciences ranked the top 3 in terms of the number of institutional publications.(3)The top 3 keywords in the CNKI database were"tissue engineering,vascularization,angiogenesis".The top 3 keywords in the Web of Science core database were"mesenchymal stem cell,scaffold,vascularization".(4)Through the analysis of co-citation and highly cited references,the main concerns were as follows:vascularization strategies:scaffold design,angiogenic factor delivery,in vitro co-culture,and in vivo pre-vascularization.Technology:3D printing,electrospinning,vascular transplantation,vascular fusion.Mechanisms:immune regulation and macrophages,drug/growth factor delivery,the relationship between endothelial cells and osteoblasts,the paracrine relationship between bone cells and endothelial cells,signaling molecular pathways,angiogenesis,and anti-angiogenesis molecules.(5)The researches concerning vascular stimulating scaffolds in bone tissue engineering in and outside China attach great importance to the application of stem cells and 3D printing technology.Current research focuses on biological 3D printing technology,scaffold modification methods,and the development and application of intelligent biomaterials based on bone repair mechanisms.

Objective:To investigate the current status of endoscopic treatment for gastroesophageal varices in portal hypertension in China, and to provide supporting data and reference for the development of endoscopic treatment.Methods:In this study, initiated by the Liver Health Consortium in China (CHESS), a questionnaire was designed and distributed online to investigate the basic condition of endoscopic treatment for gastroesophageal varices in portal hypertension in 2022 in China. Questions included annual number and indication of endoscopic procedures, adherence to guideline for preventing esophagogastric variceal bleeding (EGVB), management and timing of emergent EGVB, management of gastric and isolated varices, and improvement of endoscopic treatment. Proportions of hospitals concerning therapeutic choices to all participant hospitals were calculated. Guideline adherence between secondary and tertiary hospitals were compared by using Chi-square test.Results:A total of 836 hospitals from 31 provinces (anotomous regions and municipalities) participated in the survey. According to the survey, the control of acute EGVB (49.3%, 412/836) and the prevention of recurrent bleeding (38.3%, 320/836) were major indications of endoscopic treatment. For primary [non-selective β-blocker (NSBB) or endoscopic therapies] and secondary prophylaxis (NSBB and endoscopic therapies) of EGVB, adherence to domestic guideline was 72.5% (606/836) and 39.2% (328/836), respectively. There were significant differences in the adherence between secondary and tertiary hospitals in primary prophylaxis of EGVB [71.0% (495/697) VS 79.9% (111/139), χ2=4.11, P=0.033] and secondary prophylaxis of EGVB [41.6% (290/697) VS 27.3% (38/139), χ2=9.31, P=0.002]. A total of 78.2% (654/836) hospitals preferred endoscopic therapies treating acute EGVB, and endoscopic therapy was more likely to be the first choice for treating acute EGVB in tertiary hospitals (82.6%, 576/697) than secondary hospitals [56.1% (78/139), χ2=46.33, P<0.001]. The optimal timing was usually within 12 hours (48.5%, 317/654) and 12-24 hours (36.9%, 241/654) after the bleeding. Regarding the management of gastroesophageal varices type 2 and isolated gastric varices type 1, most hospitals used cyanoacrylate injection in combination with sclerotherapy [48.2% (403/836) and 29.9% (250/836), respectively], but substantial proportions of hospitals preferred clip-assisted therapies [12.4% (104/836) and 26.4% (221/836), respectively]. Improving the skills of endoscopic doctors (84.2%, 704/836), and enhancing the precision of pre-procedure evaluation and quality of multidisciplinary team (78.9%, 660/836) were considered urgent needs in the development of endoscopic treatment. Conclusion:A variety of endoscopic treatments for gastroesophageal varices in portal hypertension are implemented nationwide. Participant hospitals are active to perform emergent endoscopy for acute EGVB, but are inadequate in following recommendations regarding primary and secondary prophylaxis of EGVB. Moreover, the selection of endoscopic procedures for gastric varices differs greatly among hospitals.