It is a basic prerequisite for the successful completion of endodontic treatment to thoroughly understand the root canal space anatomy. With the development of dental devices in dentistry, the root canal morphology of the mandibular first premolars can be presented in more detail. Before conducting root canal therapy on the mandibular first premolar with complex root canal morphology, it should be necessary to evaluate the potential difficulties and risks for making an appropriate treatment plan. The present paper reviews the research progress on the diversities of root canal morphology in mandibular first premolars in recent years, and then makes technologic recommendations based on the morphology diversities.
Humans ; Dental Pulp Cavity/diagnostic imaging* ; Bicuspid/anatomy & histology* ; Mandible ; Tooth Root/anatomy & histology* ; Root Canal Therapy

Objective: To explore and analyze the correlation between labial gingival morphology and alveolar bone morphology of maxillary anterior teeth in patients with posterior dental implant, so as to provide reference basis for restoration design and esthetic reconstruction of anterior teeth. Methods: Sixty-four patients [24 males, 40 females (25.6±3.3) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to May 2021. According to the visibility of periodontal probe through gingival margin, the subjects were divided into thin and thick gingival biotypes, including 29 cases of thin biotype and 35 cases of thick biotype. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. Geomagic and Mimics software were used to measure and record the labial crown width and length, gingival papilla height, gingival angle, bone papilla height and bone margin angle of maxillary anterior teeth. Results: The crown width length ratios of maxillary central incisors, lateral incisors and canines were 0.85±0.08, 0.80±0.08 and 0.86±0.09 (F=10.71, P<0.01). The height of gingival papilla between maxillary central incisors, between central incisors and lateral incisors, between lateral incisors and canines were (3.93±0.86), (3.47±0.84) and (3.38±0.91) mm respectively (F=7.44, P<0.01), and the height of corresponding bone papilla were (3.44±0.88), (3.12±0.75) and (2.72±0.63) mm respectively (F=14.26, P<0.01). The gingival margin angles of maxillary central incisors, lateral incisors and canines were 88.3°±7.7°, 84.7°±8.9° and 81.2°±6.6° (F=13.15, P<0.01), and the bone margin angles were 103.2°±13.1°, 99.5°±11.2° and 110.6°±13.0° (F=13.25, P<0.01). The crown width length ratio (0.81±0.08), gingival margin angle (82.2°±7.4°) and bone margin angle (99.4°±12.9°) of thin gingival subjects were significantly lower than those of thick gingival subjects (0.85±0.09, 86.5°±8.6°, 108.5°±11.4°) (t=-2.79, 3.63, 5.20, P<0.01). The height of gingival papilla [(3.93±0.81) mm] and bone papilla [(3.43±0.80) mm] in thin gingival subjects were significantly lower than those in thick gingival subjects [(3.34±0.84) and (2.85±0.71) mm, respectively] (t=-4.89, -5.36, P<0.01). The height of labial gingival papilla of upper anterior teeth was positively correlated with that of bone papilla in all patients (r=0.66, P<0.01); the ratio of crown width to length of upper anterior teeth was positively correlated with the angle of bone margin (r=0.42, P<0.01); the height of anterior gingival papilla was negatively correlated with the angle of bone margin (r=-0.58, P<0.01), and the height of bone papilla was negatively correlated with the angle of bone margin (r=-0.82, P<0.01). Conclusions: The crown shape, gingival shape and alveolar bone shape of maxillary anterior teeth were different in different tooth positions. Patients with different periodontal phenotypes had different crown width length ratio, gingival papilla height, bone papilla height, gingival margin angle, and bone margin angle.
Adult ; Cone-Beam Computed Tomography ; Dental Implants ; Esthetics, Dental ; Female ; Gingiva/anatomy & histology* ; Humans ; Male ; Maxilla/diagnostic imaging* ; Tooth Crown ; Young Adult

OBJECTIVE: To analyze the esthetic proportions of maxillary anterior teeth in term of the apparent widths proportion of the adjacent teeth and width/height ratio of the clinical crown in 120 Chinese adults. METHODS: Maxillary gypsum casts were obtained from the dental laboratories of stomatological hospitals in North China, Southeast China, and Southwest China, according to the inclusion criteria and exclusion criteria. Standardized digital photographs of each cast were recorded. The apparent widths and actual widths and heights of the central incisors, lateral incisors and canines were determined by ImageJ software for the calculation of apparent widths proportion of the adjacent teeth and width/height ratio of the clinical crown. The ideal apparent widths proportion (Golden proportion and Preston proportion) and width/height ratio (0.80) were tested. The gender, arch side, and regional differences were investigated. RESULTS: The apparent widths proportion of the lateral/central incisor was 0.724±0.047, of the canine/lateral incisor was 0.814±0.092. The width/height ratio of the central incisor was 0.848±0.072, of the lateral incisor was 0.834±0.094, of the canine was 0.883±0.098. The esthetic proportions were different from the predicted ideal ratio (P < 0.001). The apparent widths proportion of lateral/central incisor was significantly larger in the right side than that in the left side (0.730± 0.044 vs. 0.718±0.050), and was significantly smaller in North China than that in Southwest China (0.711±0.051 vs. 0.731±0.044). The width/height ratio of the central incisor was significantly larger in the female than that in the male (0.855±0.074 vs. 0.835±0.068), and in the right side than that in the left side (0.855±0.073 vs. 0.842±0.072). The width/height ratio of the lateral incisor was significantly larger in the female than that in the male (0.843±0.097 vs. 0.817±0.084). CONCLUSION The apparent widths proportion of adjacent teeth and the width/height ratio of the clinical crown in Chinese adults are different from the foreigner's. The esthetic proportion parameters have significant population specificity, and the measurements cannot be generalized as well as it should be applied with caution.
Adult ; Asians ; China ; Cuspid ; Esthetics ; Esthetics, Dental ; Female ; Humans ; Male ; Maxilla/anatomy & histology* ; Odontometry ; Tooth Crown/anatomy & histology*

OBJECTIVE: To explore the histological structure of the deciduous teeth and the tooth germs of Tibetan miniature pigs for studies of dental tissue diseases and tooth regeneration. METHODS: The structure of the deciduous teeth of Tibetan miniature pigs was observed by X-ray. The ultrastructure of the enamel and dentin of deciduous teeth was characterized by scanning electron microscopy. The jaws and teeth were three-dimensionally reconstructed using Mimics software based on Micro-CT scanning of the deciduous teeth. Image J software was used to calculate the gray value and the mineralization density of the deciduous teeth. Hisotological structure of the tooth germ and the pulp tissue of Tibetan miniature pigs was observed using HE staining. RESULTS: The deciduous teeth of Tibetan miniature pigs were composed of enamel, dentin and medullary pulp tissue. The permanent tooth germ were formed during the deciduous dentition. The enamel and dentin ultrastructure of deciduous teeth were consistent with that of human deciduous teeth. The enamel and dentin mineralization densities were 2.47±0.09 g/cm and 1.72±0.07 g/cm, respectively. The pathological structures of tooth germ and pulp tissue were similar to those of human teeth, and the pulp tissue of the deciduous teeth was in an undifferentiated state. CONCLUSIONS The deciduous teeth of Tibetan miniature pig have similar anatomy, ultrastructure and histopathological structure to human teeth and can serve as a good animal model for studying human dental tissue diseases and the mechanisms of tooth regeneration.
Animals ; Dental Enamel ; ultrastructure ; Dental Pulp ; Dentin ; ultrastructure ; Swine ; Swine, Miniature ; Tibet ; Tooth Germ ; Tooth, Deciduous ; anatomy & histology

In recent years, individual age estimation has gained increasing attention in forensic practice. Common age estimation methods mainly use developments of teeth and bones. Compared with bones, teeth are stronger and are highly resistant to external factors, therefore plays an important role in age estimation. Demirjian's method is one of the most commonly used methods to evaluate dental age and has been widely used in many countries. In this paper, the accuracy of its application in different populations is reviewed. It is found that compared with the chronological ages, most of the estimated ages are overestimated. By combining research results of many scholars and by analyzing, it can be assumed that this situation may be related with race, region, sex, etc.
Age Determination by Teeth ; Forensic Dentistry/standards* ; Research/trends* ; Tooth/anatomy & histology*

Excessive forces may cause root resorption and insufficient forces would introduce no effect in orthodontics. The objective of this study was to investigate the optimal orthodontic forces on a maxillary canine, using hydrostatic stress and logarithmic strain of the periodontal ligament (PDL) as indicators. Finite element models of a maxillary canine and surrounding tissues were developed. Distal translation/tipping forces, labial translation/tipping forces, and extrusion forces ranging from 0 to 300 g (100 g=0.98 N) were applied to the canine, as well as the force moment around the canine long axis ranging from 0 to 300 g·mm. The stress/strain of the PDL was quantified by nonlinear finite element analysis, and an absolute stress range between 0.47 kPa (capillary pressure) and 12.8 kPa (80% of human systolic blood pressure) was considered to be optimal, whereas an absolute strain exceeding 0.24% (80% of peak strain during canine maximal moving velocity) was considered optimal strain. The stress/strain distributions within the PDL were acquired for various canine movements, and the optimal orthodontic forces were calculated. As a result the optimal tipping forces (40-44 g for distal-direction and 28-32 g for labial-direction) were smaller than the translation forces (130-137 g for distal-direction and 110-124 g for labial-direction). In addition, the optimal forces for labial-direction motion (110-124 g for translation and 28-32 g for tipping) were smaller than those for distal-direction motion (130-137 g for translation and 40-44 g for tipping). Compared with previous results, the force interval was smaller than before and was therefore more conducive to the guidance of clinical treatment. The finite element analysis results provide new insights into orthodontic biomechanics and could help to optimize orthodontic treatment plans.
Biomechanical Phenomena ; Computer Simulation ; Cuspid ; anatomy & histology ; physiology ; Dental Models ; Finite Element Analysis ; Humans ; Imaging, Three-Dimensional ; Maxilla ; Orthodontic Friction ; physiology ; Periodontal Ligament ; physiology ; Rotation ; Stress, Mechanical ; Tooth Movement Techniques ; statistics & numerical data

BACKGROUNDThe accuracy of three-dimensional (3D) reconstructions from cone-beam computed tomography (CBCT) has been particularly important in dentistry, which will affect the effectiveness of diagnosis, treatment plan, and outcome in clinical practice. The aims of this study were to assess the linear, volumetric, and geometric accuracy of 3D reconstructions from CBCT and to investigate the influence of voxel size and CBCT system on the reconstructions results.

METHODSFifty teeth from 18 orthodontic patients were assigned to three groups as NewTom VG 0.15 mm group (NewTom VG; voxel size: 0.15 mm; n = 17), NewTom VG 0.30 mm group (NewTom VG; voxel size: 0.30 mm; n = 16), and VATECH DCTPRO 0.30 mm group (VATECH DCTPRO; voxel size: 0.30 mm; n = 17). The 3D reconstruction models of the teeth were segmented from CBCT data manually using Mimics 18.0 (Materialise Dental, Leuven, Belgium), and the extracted teeth were scanned by 3Shape optical scanner (3Shape A/S, Denmark). Linear and volumetric deviations were separately assessed by comparing the length and volume of the 3D reconstruction model with physical measurement by paired t- test. Geometric deviations were assessed by the root mean square value of the imposed 3D reconstruction and optical models by one-sample t-test. To assess the influence of voxel size and CBCT system on 3D reconstruction, analysis of variance (ANOVA) was used (μ = 0.05).

RESULTSThe linear, volumetric, and geometric deviations were -0.03 ± 0.48 mm, -5.4 ± 2.8%, and 0.117 ± 0.018 mm for NewTom VG 0.15 mm group; -0.45 ± 0.42 mm, -4.5 ± 3.4%, and 0.116 ± 0.014 mm for NewTom VG 0.30 mm group; and -0.93 ± 0.40 mm, -4.8 ± 5.1%, and 0.194 ± 0.117 mm for VATECH DCTPRO 0.30 mm group, respectively. There were statistically significant differences between groups in terms of linear measurement (P < 0.001), but no significant difference in terms of volumetric measurement (P = 0.774). No statistically significant difference were found on geometric measurement between NewTom VG 0.15 mm and NewTom VG 0.30 mm groups (P = 0.999) while a significant difference was found between VATECH DCTPRO 0.30 mm and NewTom VG 0.30 mm groups (P = 0.006).

CONCLUSIONSThe 3D reconstruction from CBCT data can achieve a high linear, volumetric, and geometric accuracy. Increasing voxel resolution from 0.30 to 0.15 mm does not result in increased accuracy of 3D tooth reconstruction while different systems can affect the accuracy.

Cone-Beam Computed Tomography ; methods ; Humans ; Image Processing, Computer-Assisted ; methods ; Imaging, Three-Dimensional ; methods ; Tooth ; anatomy & histology ; pathology

OBJECTIVEThis study aims to identify the effects of corticotomy-assisted orthodontic premolar intrusion andevaluate the changes of root resorption and the alveolar bone.

METHODSBoth sides of the mandible of eight male Beagle dogswere randomly assigned into experimental and control groups. The third (P3) and fourth (P4) premolars were intruded withboth mini-screw implant anchorage (MIA) and corticotomy on the experimental side. By contrast, P3 and P4 were intrudedwith MIA alone on the control side. During pre-operation and after 2, 4, 8, and 12 weeks of orthodontic force applications,cone beam computed tomography was performed on every dog. The distance of tooth intrusion and root resorption of furcation, as well as the apex and height changes of the alveolar bone were measured and analyzed.

RESULTSThe intrusion distanceof premolars on the experimental side was greater than that on the control side (P < 0.05). The root of furcation and apex onboth sides occurred in root resorption, and the root resorption of the apex on the experimental side was lighter than that onthe control side after 12 weeks of force application (P < 0.05). The alveolar bone height decreased, and the height reductiondistance on the experimental side was greater than that on the control side after 8 and 12 weeks of force application (P < 0.05).

CONCLUSIONCorticotomy accelerates orthodontic molarintrusion and reduces root resorption.

Animals ; Bicuspid ; anatomy & histology ; Bone Screws ; Cone-Beam Computed Tomography ; Dogs ; Male ; Mandible ; Root Resorption ; Tooth Movement Techniques ; Tooth Root

OBJECTIVE: To establish the Chinese Han national criteria for the thickness of upper lip in Chongqing and to investigate the effect of lip thickness on lip retraction in orthodontic treatment.
 METHODS: A total of 240 adult patients (male=120, female=120) of Chinese Han nationality aged 18-35 years in Chongqing were treated with cephalograms and measured the thickness of upper lip. We established the Chinese Han national criteria for the thickness of upper lip in Chongqing according to the results. Sixty-eight female patients with Angle II 1 from Department of Orthodontics Stomatological Hospital of Chongqing Medical University were treated with maxillary premolars extraction, and pre- and post-treated with lateral cephalograms, then divided into 3 groups according to our criteria: a thin lips group, a normal lips group and a thick lips group. The ratio of the incisors retraction and the upper lip retraction were measured and calculated. The correlation between incisors retraction and the upper lip retraction was analyzed by the Pearson correlation method.
 RESULTS: There was statistical significance in the thickness of upper lip between males and females (P<0.01). The ratio of maxillary inscior retraction to the upper lip soft tissue retraction was 1.6:1, 2.2:1 and 2.9:1 in the thin lips group, the normal lips group and the thick lips group, respectively.
 CONCLUSION Gender differences exist in the thickness of upper lip. Upper lip retraction with the incisors was negatively correlated with the soft tissue thickness of the upper lip in females with Angle II 1.
Adolescent ; Adult ; Bicuspid ; Cephalometry ; Female ; Humans ; Incisor ; Lip ; anatomy & histology ; Male ; Tooth Extraction ; Young Adult

PURPOSE: This study aimed to investigate the clinical anatomy of lower premolar roots in a Spanish population by using cone-beam computed tomography (CBCT), correlating findings with patient gender and tooth type. MATERIALS AND METHODS: Using 70 CBCT images, we evaluated 126 healthy, untreated, well-developed lower premolars. The number and morphology of roots and root canals, and the foramina number were assessed. Results for gender and tooth type were compared using the chi-squared and ANOVA tests. RESULTS: The average length of teeth and roots was significantly higher in men (p=0.00). All 126 premolars had a single root. One canal was found in 83.3% of the premolars, with no gender or tooth type differences; Vertucci configuration types I and V were the most prevalent. The first premolars showed significantly greater variability than the second premolars (p=0.03). A single apical foramen was found in 89.7% of the premolars, with no differences by tooth type. Women had a significantly higher prevalence of two apical foramina than men (p=0.04). Some degree of curvature was observed in 65% of the premolars, with no differences by gender or tooth type. A root angle of more than 20degrees was found in 12.98% of the premolars, without any differences by gender or tooth. CONCLUSION: All premolars were single-rooted. One canal had the most prevalent morphology. More variability in canal anatomy was found in the first premolars. Curvatures greater than 20degrees were found at less than 5 mm from the apex.
Anatomy, Regional ; Bicuspid* ; Cone-Beam Computed Tomography* ; Dental Pulp Cavity ; Female ; Humans ; Male ; Mandible ; Prevalence ; Tooth ; Tooth Apex