We report two cases of postoperative total hip arthroplasty periprostehtic fracture of the acetabulum which treated by open reduction with internal fixation without acetabular cup revision. From these cases, we should consider open reduction with internal fixation as the first treatment option in cases where spot welding of the cup to the host bone is observed.

Purpose: The purpose of this study was to compare the clinical and radiographic outcomes with use of short-curved stems versus standard-length single wedged stems over a minimum follow-up period of five years. Materials and Methods: A retrospective study of primary total hip arthroplasties performed using the Fitmore® stem (127 hips, 122 patients) and the M/L taper® stem (195 hips, 187 patients) between October 2012 and June 2014 was conducted. The clinical and radiographic outcomes were obtained for evaluation over a minimum follow-up period of five years. Results: In both the Fitmore® and M/L taper® groups, the mean Harris hip score improved from 52.4 and 48.9 preoperatively to 93.3 and 94.5 at the final follow-up, respectively (P=0.980). The mean Western Ontario and McMaster Universities Osteoarthritis Index scores also improved from 73.3 and 76.8 preoperatively to 22.9 and 25.6 at the final follow-up, respectively (P=0.465). Fifteen hips (Fitmore®: 14 hips; M/L taper®: one hip, P<0.001) developed intraoperative cracks and were treated simultaneously with cerclage wiring. Radiography showed a radiolucent line in 24 hips in the Fitmore® group and 12 hips in the M/L taper® group (P=0.125). Cortical hypertrophy was detected in 29 hips (Fitmore® group: 28 hips; M/L taper® group: one hip, P<0.001). Conclusion Similarly favorable clinical and radiographic outcomes were achieved with use of both short-curved stems and standard-length single wedged stems. However, higher cortical hypertrophy and a higher rate of femoral crack were observed with use of Fitmore® stems.

In this study, the Ti6Al4V specimens were fabricated using selective laser melting (SLM) method (Ti6Al4V-AS group). These specimens were performed to heat treatment at 950℃ and 550℃ using vacuum electric furnace (Ti6Al4V-HT group). The mechanical properties, metallographic shape, crystalline structure, and chemical compositions of the alloy specimens before and after heat treatment were analyzed. The Ti6Al4V-AS group showed ultimate tensile strength (UTS) and low elongation values. Acicular crystal grains were observed in metallographic image and the α'-Ti phase was dominant. After heat treatment (Ti6Al4V-HT group), the UTS was lowered and the elongation was increased. In addition, a lamellar structure in which columnar crystal grains are arranged was observed, α+β-Ti phase was formed, and crystallinity increased. As a result of analyzing the chemical composition, the Ti6Al4V-AS specimen contained a higher carbon content than the Ti6Al4V-HT specimen. This high carbon content could be related to the formation of α'-phase, high strength and low elongation of the Ti6Al4V-AS specimen. Ti6Al4V-HT specimen showed that the overall carbon content was low, but the carbon content was locally high in the α-Ti phase region. Therefore, it is necessary to control effectively the incorporation of carbon gas in the production of Ti6Al4V specimens using SLM.

Purpose: The prognostic factors in obstructive colon cancer have not been clearly identified. We aimed to identify the prognostic factor to establish optimal treatment strategy in obstructive colon cancer. Methods: Patients who underwent surgery for primary colon cancer in stages II and III with symptomatic obstruction from 2004 to 2010 in six hospitals were retrospectively collected. Clinicopathological and surgical outcomes were compared between stent insertion and emergent surgery group. Multiple regression analysis and survival curve analysis were used to identif y the prognostic factors in symptomatic obstructive colon cancer. Results: Among 210 patients, 168 patients (80.0%) underwent stent insertion followed by surgery and 42 patients (20.0%) underwent emergent surgery. Laparoscopic approach (55.4% vs. 23.8%, p< 0.001) and adequate lymph node (LN) harvest (≥12) (93.5% vs. 69.0%, p < 0.001) were significantly higher in stent insertion group. In multiple regression analysis, emergent surgery (hazard ratio [HR], 2.153; 95% confidence interval [CI], 1.031–4.495), vascular invasion (HR, 6.257; 95% CI, 2.784–14.061), and omitting adjuvant chemotherapy (HR, 3.107; 95% CI, 1.394–6.925) were independent poor prognostic factors in 5-year overall survival, and N stage (N1: HR, 3.095; 95% CI, 1.316–7.284; N2: HR, 4.156; 95% CI, 1.671–10.333) was the only poor prognostic factor in 5-year disease-free survival. Conclusion In symptomatic obstructive colon cancer, emergent surgery, N stage, vascular invasion, and omission of adjuvant chemotherapy were independent poor prognostic factors. Stent insertion is suggested as the initial treatment for symptomatic obstructive colon cancer, and adjuvant chemotherapy is recommended, especially when vascular invasion or LN metastasis is confirmed.

Purpose: The prognostic factors in obstructive colon cancer have not been clearly identified. We aimed to identify the prognostic factor to establish optimal treatment strategy in obstructive colon cancer. Methods: Patients who underwent surgery for primary colon cancer in stages II and III with symptomatic obstruction from 2004 to 2010 in six hospitals were retrospectively collected. Clinicopathological and surgical outcomes were compared between stent insertion and emergent surgery group. Multiple regression analysis and survival curve analysis were used to identif y the prognostic factors in symptomatic obstructive colon cancer. Results: Among 210 patients, 168 patients (80.0%) underwent stent insertion followed by surgery and 42 patients (20.0%) underwent emergent surgery. Laparoscopic approach (55.4% vs. 23.8%, p< 0.001) and adequate lymph node (LN) harvest (≥12) (93.5% vs. 69.0%, p < 0.001) were significantly higher in stent insertion group. In multiple regression analysis, emergent surgery (hazard ratio [HR], 2.153; 95% confidence interval [CI], 1.031–4.495), vascular invasion (HR, 6.257; 95% CI, 2.784–14.061), and omitting adjuvant chemotherapy (HR, 3.107; 95% CI, 1.394–6.925) were independent poor prognostic factors in 5-year overall survival, and N stage (N1: HR, 3.095; 95% CI, 1.316–7.284; N2: HR, 4.156; 95% CI, 1.671–10.333) was the only poor prognostic factor in 5-year disease-free survival. Conclusion In symptomatic obstructive colon cancer, emergent surgery, N stage, vascular invasion, and omission of adjuvant chemotherapy were independent poor prognostic factors. Stent insertion is suggested as the initial treatment for symptomatic obstructive colon cancer, and adjuvant chemotherapy is recommended, especially when vascular invasion or LN metastasis is confirmed.

Purpose: To examine the perceptions and opinions of orthopedic surgeons on new medical technology for patient-specific three-dimensional (3D) bone models in the diagnosis and treatment of orthopedic diseases related to the hip joint. Materials and Methods: A total of 75 doctors who were trained in orthopedic surgery or were current residents in the Republic of Korea were surveyed via questionnaires. Eight questions were included regarding the utility and current issues in the diagnosis and treatment of orthopedic disease using a customized 3D bone model made from s patient’s computed tomography (CT) image. In addition to the questionnaire, the simple plain radiography and 3D CT image of the patient and 3D printed models of two actual patients were presented for comparison. Results: An average of 92.7% of the orthopedic surgeons answered “very much” or “yes” to questions regarding the effectiveness of diagnosis, treatment, education, and simulation of surgery using the patient-specific 3D bone model. To the question, “Do you think you must have medical insurance to provide better medical services by using a new patient-specific 3D bone model medical technology for simulated surgery?” 93.3% of orthopedic surgeons answered either “very much” or “yes”. Conclusion Patient-specific 3D bone models of new medical technology can provide breakthrough support in the diagnosis, treatment, and education of orthopedic diseases in the field of hip joints. Therefore, it seems that efforts should be made to change governmental policy for coverage of patient-specific 3D bone modeling.

The use of 3-dimensional (3D) printing is becoming more common, and its use is increasing in the orthopedic surgery. Currently, there are four major methods of using 3D printing technology in orthopedic surgery. First, surgical planning simulation using 3D printing model; second, patient-specific surgical instruments; third, production of customized prosthesis using 3D printing technique; fourth, patient-specific prosthesis produced by 3D printing. The areas of orthopedic surgery where 3D printing technology can be used are shoulder joint, spine, hip and pelvis, knee joints, ankle joint, and tumors. Since the diseases and characteristics handled by each area are different, the method of using 3D printing technology is also slightly different in each area. However, using 3D printing technology in all areas can increase the efficiency of surgery, shorten the surgery time, and reduce radiation exposure intraoperatively. 3D printing technology can be of great help in treating patients with particularly complex and difficult orthopedic diseases or fractures. Therefore, the orthopedic surgeon should make the most of the benefits of the 3D printing technology so that patient can be treated effectively.

Purpose: To evaluate the incidence and presentation of osteoporotic sequential bilateral hip fractures (SBHF) in Center for Joint Disease, Chonnam National University Hwasun Hospital as there are limited studies with variable results reported in Korea. Materials and Methods: Records of 507 patients aged >60 years old presenting with osteoporotic hip fractures between 2009 and 2015 were retrospectively reviewed to document the occurrence and presentation of sequential hip fractures; mean post-treatment follow-up was 48 months. Additionally, any correlations between sequential fractures and initial fracture and risk factors were assessed. Bone mineral density (BMD) was measured before and after sequential hip fracture for comparison. Results: There were 246 femoral neck (Group A) and 261 intertrochanteric (Group B) fractures. The cumulative incidence of SBHF was 8.2% (42 patients total; 29 in Group A and 13 in Group B). Average interval of SBHF for Group A and Group B were 37.4 months and 29.9 months, respectively. There was significant correlation between the initial fracture type and sequential fractures, particularly the trochanteric and subgroup of those with neck fractures. Hypertension as a co-morbidity and female sex have been identified as risk factors for SBHF. No significant findings were noted regarding BMD and risk factors in both groups. Conclusion The clinical presentations of SBHF noted here concur with other worldwide studies and may guide efforts to develop relevant programs to prevent SBHF.

The use of three-dimensional (3D) printing is becoming more common, including in the field of orthopaedic surgery. There are currently four primary clinical applications for 3D-printing in hip and pelvic surgeries: (i) 3D-printed anatomical models for planning and surgery simulation, (ii) patient-specific instruments (PSI), (iii) generation of prostheses with 3D-additive manufacturing, and (iv) custom 3D-printed prostheses. Simulation surgery using a 3D-printed bone model allows surgeons to develop better surgical approaches, test the feasibility of procedures and determine optimal location and size for a prosthesis. PSI will help inform accurate bone cuts and prosthesis placement during surgery. Using 3D-additive manufacturing, especially with a trabecular pattern, is possible to produce a prosthesis mechanically stable and biocompatible prosthesis capable of promoting osseointergration. Custom implants are useful in patients with massive acetabular bone loss or periacetabular malignant bone tumors as they may improve the fit between implants and patient-specific anatomy. 3D-printing technology can improve surgical efficiency, shorten operation times and reduce exposure to radiation. This technology also offers new potential for treating complex hip joint diseases. Orthopaedic surgeons should develop guidelines to outline the most effective uses of 3D-printing technology to maximize patient benefits.

The causes of osteolytic lesions found in radiological examinations are not quite certain. Therefore, to determine the appropriate treatment method, various approaches and analyzes are required to find the real cause. Hyperparathyroidism is one of the diseases which forms osteolytic bone lesions so-called brown tumor. A 55-year-old woman who had painful osteolytic bone lesions in both hip joint areas was diagnosed as parathyroid carcinoma after serial work-up. She underwent parathyroidectomy and follow-up imaging showed a decrease in brown tumor size and bone consolidation in the subchondral bone destruction area. Proper evaluation of osteolytic bone lesions helps to avoid unnecessary operative treatments and the first choice for the treatment of osteolytic bone lesions caused by parathyroid carcinoma is parathyroidectomy.
Female ; Follow-Up Studies ; Hip Joint ; Humans ; Hyperparathyroidism ; Methods ; Middle Aged ; Osteitis Fibrosa Cystica ; Parathyroid Neoplasms ; Parathyroidectomy