Background/Aims: Real-world, clinical practice data are lacking about sofosbuvir/ ribavirin (SOF/RBV) treatment of Korean patients with hepatitis C virus genotype 2 (HCV GT2) infection. This study investigated the efficacy and safety of SOF/RBV in Korean patients with HCV GT2 infection and clinical factors predicting sustained virological response 12 weeks (SVR12) after the end of SOF/RBV treatment. Methods: A total of 181 patients with HCV GT2 with/without cirrhosis were treated with SOF/RBV for 16/12 weeks. Rapid virological response (RVR) was defined as non-detectable HCV RNA at 4 weeks. Results: The RVR rate was 80.7% (146/181), the end of treatment response rate was 97.8% (177/181) and the SVR12 rate was 92.8% (168/181). Of eight patients with relapse, four did not achieve RVR. Three patients had a history of hepatocellular carcinoma (HCC). Multivariable analysis showed that RVR (p = 0.015) and no previous history of HCC (p = 0.007) were associated with SVR12. Factors significantly contributing to RVR included cirrhosis, creatinine concentration, and pre-treatment HCV RNA level. SVR12 rate was significantly higher in RVR (+) than RVR (–) patients (95.2% vs. 82.9%, p = 0.011) and also significantly higher in patients without than with a history of HCC (94.1% vs. 72.7%, p = 0.008). During treatment, 80/181 patients (44.2%) experienced mild to moderate adverse events, with 32 (17.7%) requiring RBV dose reductions due to anemia. Conclusions SOF/RBV treatment was effective and tolerable in HCV GT2 patients. RVR and no previous history of HCC were positive predictors of SVR12.

Background/Aims: Real-world, clinical practice data are lacking about sofosbuvir/ ribavirin (SOF/RBV) treatment of Korean patients with hepatitis C virus genotype 2 (HCV GT2) infection. This study investigated the efficacy and safety of SOF/RBV in Korean patients with HCV GT2 infection and clinical factors predicting sustained virological response 12 weeks (SVR12) after the end of SOF/RBV treatment. Methods: A total of 181 patients with HCV GT2 with/without cirrhosis were treated with SOF/RBV for 16/12 weeks. Rapid virological response (RVR) was defined as non-detectable HCV RNA at 4 weeks. Results: The RVR rate was 80.7% (146/181), the end of treatment response rate was 97.8% (177/181) and the SVR12 rate was 92.8% (168/181). Of eight patients with relapse, four did not achieve RVR. Three patients had a history of hepatocellular carcinoma (HCC). Multivariable analysis showed that RVR (p = 0.015) and no previous history of HCC (p = 0.007) were associated with SVR12. Factors significantly contributing to RVR included cirrhosis, creatinine concentration, and pre-treatment HCV RNA level. SVR12 rate was significantly higher in RVR (+) than RVR (–) patients (95.2% vs. 82.9%, p = 0.011) and also significantly higher in patients without than with a history of HCC (94.1% vs. 72.7%, p = 0.008). During treatment, 80/181 patients (44.2%) experienced mild to moderate adverse events, with 32 (17.7%) requiring RBV dose reductions due to anemia. Conclusions SOF/RBV treatment was effective and tolerable in HCV GT2 patients. RVR and no previous history of HCC were positive predictors of SVR12.

PURPOSE: The purpose of this retrospective study was to evaluate the method using the S-reamer and gel-type graft material by the success rate and survival rate.MATERIALS AND METHODS: Implantation period was from 2008 to 2014, Follow check up year is 2019. There were 59 patients and 117 implants. All implants were placed in the posterior maxilla with the sinus lift. The patients population consisted of 34 men and 25 women, ranging from 19 to 75 years. The residual bone heights were from 1 mm to 6 mm. Sinus was perforated with S-reamer without membrane tearing and gel type bone graft material was used for membrane lifting and filling the space. all implants were placed simultaneously. Panoramic X-ray was taken. After 5 – 6 months healing period, final prostheses were restored. After more 5-years implant surgery, Panoramic X-ray was obtained and X-ray analysis and clinical examination were performed. Success criteria was referred to a Buser's success critera. All implants were classified to success implant, survival implant, failed implant. A success implant was satisfying success criteria, a survival implant was a implant that was acute infection with suppuration and bone loss, a failed implant was a implant that was mobile, removed.RESULTS: Five implants were removed, and 4 implants had infected with bone loss. Survival rate was 95.7% and success rate was 92.3%.CONCLUSION: This retrospective study presented that this method with S-reamer and gel-type graft material was a successful treatment without membrane tear in the condition of 1-6 mm residual bone height.
Female ; Humans ; Lifting ; Male ; Maxilla ; Membranes ; Methods ; Prostheses and Implants ; Retrospective Studies ; Suppuration ; Survival Rate ; Tears ; Transplants

PURPOSE: Chemically strong-acids (HF and HCl/H₂SO₄) dual etching implant surfaces have higher strengths of osseointegration than machined implant surfaces. However, the dual acid treatment deteriorates the physical properties of the titanium by weakening the fatigue resistance of the implant and causing microcracks. The removal torque comparison between the dual-acid etched (hydrochloric acid, sulfuric acid, HS) and single-acid etched implants (hydrochloric acid, H) could reveal the efficiency of implant surface acid treatment. MATERIALS AND METHODS: Nine 3.75 × 4 mm dual-acid etched SLA implants and nine single-acid etched SLA implants were inserted into New Zealand rabbit tibias. After 10 days, removal torque, roughness, and wetting angle were measured. RESULTS: Mean removal torque values were as follows: Mean removal torque were 9.94 Ncm for HS group and 9.96 Ncm for H group (P=.995). Mean surface roughness value were 0.93 µm for HS group and 0.84 µm for H group (P=.170). Root mean square roughness (RSq) values were 1.21 µm for HS group and 1.08 µm for H group (P=.294), and mean wetting angle values were 99° for HS group and 98° for H group (P=.829). Statistical analysis showed no significant difference between the removal torques, roughness, or wetting angles of the two groups. CONCLUSION: In this experiment, we found no significant difference in removal torque, roughness, or wetting angle between dual-acid etched and single-acid etched implants.
Fatigue ; Osseointegration ; Rabbits ; Sulfur ; Tibia ; Titanium ; Torque

PURPOSE: The aim of this study was to confirm if Laser-treated implants were soaked in 0.9% NaCl solution for 2 weeks could increase the surface hydrophilicity, and the Remoal Torque of each implant that inserted in rabbit tibia for initial healing period of 10 days. MATERIALS AND METHODS: Twenty machined titanium surface screws were produced with a diameter 3 mm, length 8 mm. Ten screws had their surface treated with a laser only (laser treated group), and the other 10 were soaked in saline for 2 weeks after surface treatment with a laser (laser treated + saline soaked group). Implants were inserted in rabbit tibia (ten adult New Zealand white rabbits), and the RTQ of each implant was measured after 10 days. The wettability among implants was compared by measuring the contact angle. Surface composition and surface topography were analyzed. RESULTS: After 10 days, the laser treat + soaking group implants had a significantly higher mean RTQ than the laser treated implants (P = .002, < .05). There were no significant morphological differences between groups, and no remarkable differences were found between the two groups in the SEM analysis. CONCLUSION: Saline soaking implants is expected to produce excellent RTQ and surface analysis results.
Adult ; Humans ; Hydrophobic and Hydrophilic Interactions ; New Zealand ; Tibia ; Titanium ; Torque ; Wettability

PURPOSE: The purpose of this study is to investigate the effect of the titanium implant soaked in saline after RBM and acid etched surface treatment on the initial osseointegration by comparing the removal torque and the surface analysis compared to the titanium implant with only RBM and acid etched surface treatment. MATERIALS AND METHODS: The control group was RBM and acid etched surface treated implants (RBM + HCl), and the test group was implants soaked in saline for 2 weeks after RBM and acid etched surface treatment (RBM + HCl + Sal). The control and test group implants were placed in the left and right tibiae of 10 rabbits, respectively, and at the same time, the insertion torque (ITQ) was measured. After 10 days, the removal torque (RTQ) was measured by exposing the implant site. FE-SEM, EDS, Surface roughness and Raman spectroscopy were performed for the surface analysis of the new implant specimens used in the experiments. RESULTS: There was significant difference in insertion torque and removal torque between control group and experimental group (P = 0.014 < 0.05). Surface roughness of experimental group is higher than control group. CONCLUSION: Saline soaking after RBM and acid etched surface treatment of titanium implants were positively affect the initial osseointegration as compared to titanium implants with only RBM and acid etched surface treatment.
Hydroxyapatites ; Immersion ; Osseointegration ; Rabbits ; Sodium Chloride ; Spectrum Analysis, Raman ; Tibia ; Titanium ; Torque

PURPOSE: The purpose of this study was to analyze the effects of two different implant surface treatments on initial bone connection by comparing the Removal Torque Values (RTQs) at 7 and 10 days after chemically modified, sandblasted, large-grit and acid-etched (modSLA), and Laser-etched (LE) Ti implant placements. MATERIALS AND METHODS: Twenty modSLA and 20 LE implants were installed on the left and right tibias of 20 adult rabbits. RTQs were measured after 7 and 10 days in 10 rabbits each. Scanning electron microscope (SEM) photographs of the two implants were observed by using Quanta FEG 650 from the FEI company (Hillsboro, OR, USA). Analyses of surface elements and components were conducted using energy dispersive spectroscopy (EDS, Horiba, Kyoto, Japan). RESULTS: The mean RTQs were 12.29 ± 0.830 and 12.19 ± 0.713 Ncm after 7 days (P=.928) and 16.47 ± 1.324 and 16.17 ± 1.165 Ncm after 10 days (P=.867) for LE and modSLA, respectively, indicating no significant inter-group differences. Pore sizes in the LE were 40 µm and consisted of numerous small pores, whereas pore sizes in the modSLA were 5 µm. In the EDS analysis, Ti, O, and C were the only three elements found in the LE surfaces. Na, Ca, Cl, and K were also observed in modSLA, in addition to Ti, O, and C. CONCLUSION: The implants showed no significant difference in biomechanical bond strength to bone in early-stage osseointegration. LE implant can be considered an excellent surface treatment method in addition to the modSLA implant and can be applied to the early loading of the prosthesis clinically.
Adult ; Humans ; Methods ; Osseointegration ; Prostheses and Implants ; Rabbits ; Spectrum Analysis ; Tibia ; Torque

PURPOSE: The marginal bone loss of implants with laser treated surface was investigated after six weeks of loading after implant installation to the mandible molar area. MATERIALS AND METHODS: A total of 23 implants were placed in the edentulous molar area of the mandible: 13 implants were immediately loaded and 10 implants were early loaded. The implants used were made of titanium grade 23, screw shaped, 4.2 mm in diameter, and 10 mm in length. Patients were evaluated with resonance frequency analysis at implant fixture installation and 1, 2 (final prosthesis installation), 3, 5, 8, and 14 months later. X-rays were taken at 2 months after fixture installation and 1, 2, 3 years after to measure the marginal bone loss. RESULTS: The mean ISQ value measured at the implant installation was over 70 at all-time points. The average of marginal bone loss was average 0.33 mm. CONCLUSION: Immediate implant loading for laser treated implants would be possible.
Humans ; Mandible ; Molar ; Prostheses and Implants ; Retrospective Studies ; Titanium

PURPOSE: This study aimed to evaluate the marginal discrepancy of full-arch frameworks in implant-supported prostheses fabricated using pre-sintered soft alloy (PSA). MATERIALS AND METHODS: Full-arch metal frameworks were fabricated on the edentulous implant model using casting alloy (CA), fully-sintered hard alloy (FHA), and PSA (n = 4 in each group). To evaluate the misfit of the framework to the abutments, the absolute marginal discrepancy (AMD) values of the frameworks were measured in cross-sectional images that had been drawn as part of the triple-scan protocol. The AMD values were compared among the tested alloy groups using the Kruskal-Wallis test, with a post hoc Mann-Whitney U test (α=.05). RESULTS: The FHA and PSA groups showed lower marginal discrepancies than the CA group (P < .001). However, the FHA group did not differ significantly from the PSA group. CONCLUSION: Soft alloy milling is comparable to hard alloy milling, and it is more precise than casting in terms of the marginal fit of implant-supported, full-arch prostheses.
Alloys ; Pilot Projects ; Prostheses and Implants

PURPOSE: The purpose of this study is to investigate the effect of the titanium implant soaked in saline after RBM surface treatment on the initial osseointegration by comparing the removal torque and the surface analysis compared to the titanium implant with only RBM surface treatment. MATERIALS AND METHODS: The control group was RBM surface treated implants (RBM), and the test group was implants soaked in saline for 2 weeks after RBM surface treatment (RBM+Sal). The control and test group implants were placed in the left and right tibiae of 10 rabbits, respectively, and at the same time, the insertion torque (ITQ) was measured. After 10 days, the removal torque (RTQ) was measured by exposing the implant site. FE-SEM, EDS, Surface roughness and Raman spectroscopy were performed for the surface analysis of the new implant specimens used in the experiments. RESULTS: There was no significant difference in insertion torque and removal torque between RBM surface treated titanium implants and saline-soaked titanium implants after RBM surface treatment. CONCLUSION: Saline soaking after RBM surface treatment of titanium implants did not positively affect the initial osseointegration as compared to titanium implants with only RBM surface treatment.
Hydroxyapatites ; Osseointegration ; Rabbits ; Sodium Chloride ; Spectrum Analysis, Raman ; Tibia ; Titanium ; Torque