Objective:To investigate the efficacy of one-stage posterior-anterior combined operation for the treatment of abnormal fusion after facet joint dislocation in the subaxial cervical spine.Methods:A retrospective study of case series was conducted to analyze the clinical data of 10 patients with abnormal fusion after facet joint dislocation in the subaxial cervical spine who had been admitted to Department of Spine Surgery, Zhengzhou Orthopedic Hospital from January 2015 to May 2023. There were 7 males and 3 females with an age of (41.2±3.1) years. Preoperative American Spinal Injury Association (ASIA) grading: 5 cases of grade A, 4 cases of grade B, and 1 cases of grade C. All the patients were treated with one-stage posterior-anterior combined operation. The surgical time and intraoperative bleeding volume were recorded. The ASIA grading was used to evaluate the improvements in nerve function of the spinal cord 3 months after surgery. The VAS scores, cervical intervertebral heights, and Cobb angles were compared between pre-surgery, 3 months after surgery, and the last follow-up. The fusion of intervertebral bone graft was evaluated 3 months after surgery using the Bridgell intervertebral fusion criteria. Complications were observed.Results:All patients were followed up for 15.5 (13.8, 20.5) months. The surgical time was (119.5±3.6) minutes, and the intraoperative bleeding volume (141.6±25.6) mL. Significant improvements in VAS score, cervical intervertebral height, and Cobb angle were observed at 3 months after surgery and the last follow-up compared with the pre-surgery values ( P<0.05), but there was no statistically significant difference between 3 months after surgery and the last follow-up ( P>0.05). ASIA grading 3 months after surgery: 4 cases of grade A, 4 cases of grade B, and 2 cases of grade C. By the Bridgell intervertebral fusion criteria at 3 months after surgery: 9 cases of grade Ⅰ and 1 cases of grade Ⅱ, showing good intervertebral fusion. Surgery went on well for all patients, showing no postoperative complications such as aggravation of nerve lesion or vascular injury. Conclusion:In the treatment of abnormal fusion after facet joint dislocation in the subaxial cervical spine, the efficacy of one-stage posterior-anterior combined operation is definite because it can effectively reduce pain, restore the height and physiological curvature of the cervical intervertebral space, and achieve good intervertebral fusion.

Mitochondrial and peroxisome fission deficiency-related encephalopathy caused by DNM1L gene mutation is a rare and fatal epileptic encephalopathy, with clinical phenotype and genetic heterogeneity. The acute stage is drug-resistant epilepsy with poor prognosis and serious neurological sequelae. A case of genetically confirmed encephalopathy related to mitochondrial and peroxisome fission defects is reported, the clinical data, treatment process are summarized, and the previous literature is reviewed to improve the understanding of the rare disease.

Objective:To develop a robotic digestive endoscope system (RDES) and to evaluate its feasibility, safety and control performance by experiments.Methods:The RDES was designed based on the master-slave control system, which consisted of 3 parts: the integrated endoscope, including a knob and button robotic control system integrated with a gastroscope; the robotic mechanical arm system, including the base and arm, as well as the endoscopic advance-retreat control device (force-feedback function was designed) and the endoscopic axial rotation control device; the control console, including a master manipulator and an image monitor. The operator sit far away from the endoscope and controlled the master manipulator to bend the end of the endoscope and to control advance, retract and rotation of the endoscope. The air supply, water supply, suction, figure fixing and motion scaling switching was realized by pressing buttons on the master manipulator. In the endoscopy experiments performed on live pigs, 5 physicians each were in the beginner and advanced groups. Each operator operated RDES and traditional endoscope (2 weeks interval) to perform porcine gastroscopy 6 times, comparing the examination time. In the experiment of endoscopic circle drawing on the inner wall of the simulated stomach model, each operator in the two groups operated RDES 1∶1 motion scaling, 5∶1 motion scaling and ordinary endoscope to complete endoscopic circle drawing 6 times, comparing the completion time, accuracy (i.e. trajectory deviation) and workload.Results:RDES was operated normally with good force feedback function. All porcine in vivo gastroscopies were successful, without mucosal injury, bleeding or perforation. In beginner and advanced groups, the examination time of both RDES and ordinary endoscopy tended to decrease as the number of operations increased, but the decrease in time was greater for operating RDES than for operating ordinary endoscope (beginner group P=0.033; advanced group P=0.023). In the beginner group, the operators operating RDES with 1∶1 motion scaling or 5∶1 motion scaling to complete endoscopic circle drawing had shorter completion time [1.68 (1.40, 2.17) min, 1.73 (1.47, 2.37) min VS 4.13 (2.27, 5.16) min, H=32.506, P<0.001], better trajectory deviation (0.50±0.11 mm, 0.46±0.11 mm VS 0.82±0.26 mm, F=38.999, P<0.001], and less workload [42.00 (30.00, 50.33) points, 43.33 (35.33, 54.00) points VS 52.67 (48.67, 63.33) points, H=20.056, P<0.001] than operating ordinary endoscope. In the advanced group, the operators operating RDES with 1∶1 or 5∶1 motion scaling to complete endoscopic circle drawing had longer completion time than operating ordinary endoscope [1.72 (1.37, 2.53) min, 1.57 (1.25, 2.58) min VS 1.15 (0.86, 1.58) min, H=13.233, P=0.001], but trajectory deviation [0.47 (0.13, 0.57) mm, 0.44 (0.39, 0.58) mm VS 0.52 (0.42, 0.59) mm, H=3.202, P=0.202] and workload (44.62±21.77 points, 41.24±12.57 points VS 44.71±17.92 points, F=0.369, P=0.693) were not different from those of the ordinary endoscope. Conclusion:The RDES enables remote control, greatly reducing the endoscopists' workload. Additionally, it gives full play to the cooperative motion function of the large and small endoscopic knobs, making the control more flexible. Finally, it increases motion scaling switching function to make the control of endoscope more flexible and more accurate. It is also easy for beginners to learn and master, and can shorten the training period. So it can provide the possibility of remote endoscopic control and fully automated robotic endoscope.

ObjectiveTo adapt the Stanford Expectations of Treatment Scale（SETS） into Chinese（C-SETS） and test the feasibility， validity and reliability of its application in patients with diarrhea-predominant irritable bowel syndrome（IBS-D） with liver-constraint and spleen-deficiency syndrome treated with traditional Chinese medicine（TCM）. MethodsWe obtained authorisation from the developer of the SETS， and followed the principle of "two-way translation" to translate the SETS by literal translation and back translation to form the C-SETS. Ninety-six IBS-D patients with liver-constraint and spleen-deficiency syndrome were enrolled as respondents and filled out C-SETS before receiving treatment； the feasibility was assessed by the recall rate， completion rate and the duration of filling out the scale； the reliability was assessed by Cronbach's α； the structural validity was assessed by exploratory and confirmatory factor analysis， and the content validity was assessed by correlation analysis. ResultsThe C-SETS consists of 10 items， with the 1st， 3rd， and 5th rating items constituting the Positive Expectations subscale， and the 2nd， 4th， and 6th rating items constituting the Negative Expectations subscale， each of which is rated on a 7-point Likert Scale. The recall of C-SETS was 100%（96/96）， the completion rate was 89.58%（86/96）； Cronbach's α for the Positive and Negative Treatment Expectations subscales were 0.845 and 0.854， respectively； exploratory factor analysis showed that the coefficient of commonality for all six entries was larger than 0.4， and that the six entries could be used by both factors to explain 77.092% of the total variance； validation factor analysis showed that the goodness-of-fit index， comparative fit index， root mean square of approximation error， canonical fit coefficient， and chi-square degrees of freedom ratio took the values of 0.943， 1.003， 0， 0.943， and 0.626， respectively； and the results of Spearman's analysis suggested that the C-SETS had good content validity. ConclusionThe C-SETS has well feasibility， reliability， and validity， which initially proves that it can be used as a tool to assess the treatment expectation of patients with IBS-D with liver-constraint and spleen-deficiency syndrome before receiving TCM treatment.

Objective:To explore the efficacy of stage I modified posterior vertebral column resection (mPVCR) in the treatment of postoperative infection after percutaneous vertebroplasty (PVP) for osteoporotic vertebral compression fracture (OVCF).Methods:A retrospective case series study was conducted to analyze the clinical data of 11 OVCF patients with post-PVP infection who were admitted to Zhengzhou Orthopedics Hospital from January 2016 to June 2022, including 4 males and 7 females, aged 61-81 years [(70.2±6.4)years]. Injured segments included T 9 in 1 patient, T 11 in 2, T 12 in 3, L 1 in 1, L 2 in 2, T 11-T 12 in 1, and T 12-L 1 in 1. American Spinal Injury Association (ASIA) grading was grade D in 5 patients and grade E in 6. All the patients were treated with stage I mPVCR. The operation time and intraoperative bleeding volume were recorded. The values of Visual Analogue Scale (VAS), Oswestry Dysfunction Index (ODI), and Cobb angle of the lesion segments before, at 2 weeks, 3 months after surgery, and at the last follow-up were compared. The loss of Cobb angle of the lesion segments at 2 weeks after surgery and at the last follow-up were compared, and the ASIA grading at the last follow-up was recorded. The infection control, bone healing, and the incidence of complications were observed at the last follow-up. Results:All the patients were followed up for 12-44 months [(26.0±9.4)months]. The operation time and intraoperative bleeding volume were 230-330 minutes [(279.2±28.6)minutes] and 500-1 100 ml [(840.9±184.1)ml] respectively. At 2 weeks, 3 months after surgery and at the last follow-up, the VAS scores were (4.0±0.8)points, (2.7±0.9)points, and (2.4±0.7)points respectively, which were all lower than that before surgery [(8.1±1.2)points] ( P<0.01); the ODI was (45.5±5.1)%, (30.0±6.5)%, and (18.5±3.6)% respectively, which were all lower than that before surgery [(78.7±6.2)%] ( P<0.01); the Cobb angle of the lesion segments were (7.9±1.4)°, (8.5±1.4)°, and (9.2±1.5)° respectively, which were lower than that before surgery [(25.5±9.2)°] ( P<0.01). The VAS and ODI were both improved at 3 months after surgery compared with those at 2 weeks after surgery ( P<0.05), while there was no significant difference in Cobb angle of the lesion segments ( P>0.05). The ODI was further improved at the last follow-up compared with that at 3 months after surgery ( P<0.05), while there were no significant differences in VAS or Cobb angle of the lesion segments ( P>0.05). The loss of Cobb angle correction of the lesion segment at the last follow-up was 0.96 (0.69, 1.45)° compared with that at 2 weeks after surgery and the rate of loss of Cobb angle correction of the lesion segment was 4.4(2.2, 7.4)%. At the last follow-up, the ASIA grading was grade E for all the patients, who were able to walk normally independently. The infection was all cured and good bony fusion was observed in the operated area at the last follow-up. Two patients had pleural effusion and pulmonary atelectasis, 1 incision fat liquefaction, and 1 pneumonia after the surgery. None of the patients had internal fixation failure and serious complications such as worsening neurological symptoms or death. Conclusion:Stage I mPVCR for the treatment of post-PVP infection in patients with OVCF is proved to attain significant pain relief and functional improvement, good correction results, effective reconstruction of spinal stability, complete removal of infected lesions, and few serious complications.

Objective To explore the clinical value of vaginoscopy in the diagnosis and treatment of uterine cavity diseases in virgins.Methods We retrospectively reviewed the data of 450 patients who underwent vaginoscopy and traditional hysteroscopy in Obstetrics and Gynecology Hospital,Fudan University from Jan 2020 to Dec 2023,including vaginoscopy group(n=232)and traditional hysteroscopy group(n=218).The average ages of the two groups were 24.9±4.7 years and 25.5±5.4 years,and there was no significant difference between the two groups(P>0.05).The operation time,estimated blood loss,fluid deficit,false passage,surgical failure,incidence of complications and postoperative pain score were compared between vaginoscopy group and traditional hysteroscopy group.Results Compared with the traditional hysteroscopy group,the average operation time in the vaginoscopy group was shorter,the fluid deficit was less,and the VAS pain score was lower,but the rate of surgical failure was higher(7.8%vs.0),all the differences were statistically significant(P<0.05).In terms of complications,the incidence of false passage in the vaginoscopy group was less(0 vs.3.2%)and the rate of hymen injury was lower(0 vs.85.3%),the differences were statistically significant(P<0.05).There was no significant difference in the estimated blood loss between the two groups,and the incidence of postoperative infection was similar in both groups.There were no complications such as uterine perforation and air embolism in both groups.Conclusion Vaginoscopy is safe and effective,more minimally invasive than traditional hysteroscopy,does not damage the hymen,and is suitable for virgins.This technology is worthy of clinical application.

Objective To compare the changes of the medical animal resources(MAR)in Sichuan based on the data of the 3rd Chinese Materia Medica Resource Inventory(CMMRI,1983-1986)and the 4th CMMRI(2020-2022).Methods After field investigation and identification of the photos of the animals,the data of the MAR in Sichuan found in the 4th CMMRI were analyzed and compared with the data of 3rd CMMRI.Results 745 species of MAR were found in Sichuan during the 4th CMMRI,including 212 families and 468 genera.Compared with the 108 species found in 3rd CMMRI,the number of MAR in Sichuan had greatly increased,The Aves was found to have 243 species of MAR,which is the most plenty one among the 7 classes.There were 14 families which have more than 10 species of MAR.The family,Cyprinidae had 48 species of MAR.There were 33 common Chinese medicinal herbs and 3 genuine medicinal materials including Cordyceps sinensis,musk and Venenum bufonis were found in this investigation.The new distributions of Liangshan Cordyceps and Cordyceps gunnii were found in the investigation,and the new resources of Atypus heterothecus was found in Mountain Emei.There were 140 species of key protection of wild medicinal animals,including 44 species of animals under first-class protection and 96 species of animals under second-class protection.There were 230 species of animals which had important ecological,scientific,and social values,too.Conclusion Sichuan was plenty of medical animal resources and the protection of the forest musk deer,the Cordyceps sinensis and the pangolin was need to be strengthened.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To compare the efficacy of conventional open ankle fusion and three dimensional(3D) printed guide plate assisted arthroscopic ankle fusion.Methods:A retrospective cohort study was performed on 256 patients with advanced traumatic ankle arthritis, who were admitted to the Department of Orthopaedics, Shanghai Sixth People′s Hospital Affiliated to Shanghai Jiao Tong University School of Medicine from May 2018 to February 2023 and underwent ankle fusion procedures. The study cohort comprised 119 males and 137 females, with an age of (59.6±9.5) years (range: 37 to 83 years). Among them, 175 cases underwent internal fixation with plates and screws (58 cases through the combined medial and lateral approach, and 117 cases through the simple lateral approach), 48 cases underwent internal fixation with screws through the anterior approach (conventional open group), and 33 cases underwent minimally invasive arthroscopic ankle fusion assisted by 3D printed guide plate (3D printed guide plate arthroscopy group). Propensity score matching was employed to achieve a 1∶1 match(caliper value=0.02) between the baseline characteristics of patients in the 3D printed guide plate arthroscopy group and the conventional open group. Perioperative and follow-up data between the two groups were compared using the t-test, Mann-Whitney U test, Wilcoxon signed rank test, χ2 test or corrected χ2 test as appropriate. Results:Matching was successfully achieved with 20 cases in both the 3D printed guide plate arthroscopy group and the conventional open group, and there were no statistically significant differences in baseline characteristics between the two groups (all P>0.05). The operation time in the 3D printed guide plate arthroscopy group was significantly longer than that in the conventional open group ((88.9±5.6) minutes vs. (77.9±11.7) minutes; t=-2.392, P=0.022), while the frequency of intraoperative fluoroscopies ((1.7±0.8) times vs. (5.2±1.2) times; t=10.604, P<0.01) and length of hospitalization ((5.5±0.9) days vs. (6.4±1.5) days; t=2.480, P=0.018) were significantly lower in the 3D printed guide plate arthroscopy group compared to the conventional open group. The fusion rate was 95.0% (19/20) in the 3D printed guide plate arthroscopy group and 85.0% (17/20) in the conventional open group, with no statistically significant difference between the two groups ( χ2=0.278, P=0.598). The fusion time was (12.1±2.0) weeks in the conventional open group and (11.1±1.7) weeks in the 3D printed guide plate arthroscopy group, with no statistically significant difference between the two groups ( t=1.607, P=0.116). At the final follow-up, the American Orthopedic Foot and Ankle Society ankle hindfoot scale was (72.6±5.5)points in the 3D printed guide plate arthroscopy group and (70.5±5.8)points in the conventional open group, with no statistically significant difference between the two groups ( t=-1.003, P=0.322). The pain visual analogue score of the 3D printed guide plate arthroscopy group was ( M(IQR)) 1.50 (1.00) points, lower than that of the conventional open group by 3.00 (1.00) points, with statistically significant differences ( Z=-3.937, P<0.01). There was no significant difference in complication rate between the conventional open group and the 3D printed guide plate arthroscopy group (25.0%(5/20) vs. 5.0%(1/20), χ2=1.765， P=0.184). Conclusion:3D printed guide plate assisted arthroscopic ankle fusion exhibited several advantages, including reduced frequency of fluoroscopies, alleviation of postoperative pain, and decreased complications and length of hospitalization.

Objective:To investigate the effect of safflower yellow pigment injection combined with alprostadil on patients after coronary artery bypass grafting(CABG).Methods:A total of 92 patients with coronary heart disease who received CABG in Department of Cardiovascular Surgery,Handan Central Hospital between September 2018 and September 2020 were selected.According to order of admission,they were divided into control group(n=46,from September 2018 to Sep-tember 2019,routine therapy+alprostadil after CABG)and study group(n=46,from October 2019 to September 2020,safflower yellow pigment injection based on control group),both groups were treated for 28d.On 3d after drug withdraw-al,therapeutic effect,cardiac function indexes,four myocardial enzyme spectrum and perioperative indexes were compared between two groups.Results:On 3d after drug withdrawal,compared with control group,patients in study group had sig-nificant higher total effective rate(73.9％vs.91.3％),left ventricular ejection fraction(LVEF)[(55.77±4.48)％vs.(62.18±4.21)％](P=0.028,＜0.001),and significant lower left atrial diameter(LAD)[(36.83±3.45)mm vs.(32.09±3.23)mm],left ventricular end-diastolic diameter(LVEDd)[(49.04±4.65)mm vs.(43.83±5.24)mm],levels of creatine kinase(CK)[(125.13±14.21)U/L vs.(62.56±8.42)U/L],lactate dehydrogenase(LDH)[(203.58±31.63)U/L vs.(156.07±22.26)U/L],aspartate aminotransferase(AST)[(44.25±12.98)U/L vs.(35.41±12.37)U/L]and creatine kinase isoenzyme MB(CK-MB)[(28.11±9.84)U/L vs.(17.59±7.41)U/L](P＜0.001 all).Conclusion:The combination of safflower yellow pigment injection and alprostadil can improve the thera-peutic effect and heart function,and reduce myocardial injury in patients after CABG.