This study briefly introduces the basic theory of sterilization, the characteristics of ethylene oxide sterilization for medical devices and the key factors about sterilization effectiveness, analyzes and compares three methods used in the product release of medical devices sterilized by ethylene oxide: test for sterility, traditional release and parametric release, and focuses on the theoretical basis, feasibility, validation requirements, advantages and disadvantages of parametric release.
Ethylene Oxide ; Sterilization/methods*

OBJECTIVE: To compare three sterilizing methods for reusable medical goggles. METHODS: A total of 180 medical goggles of the same brand and same model were randomly divided into three groups. In group A the goggles were first soaked with 2000 mg/L chlorine-containing disinfectant and then cleaned manually; goggles in other two groups were sterilized using pre-programmed automatic spray cleaning and disinfection machine, the disinfection program was set to 90 ℃ for 5 min in group B and 70 ℃ for 30 min in group C. The quality of the sterilization was monitored by visual inspection with luminous magnifying glass and residual protein detection assay. User satisfaction on cleanliness of medical goggles, clarity of mirror surface and suitability of elastic bands was investigated with questionnaire survey. RESULTS: The qualification rates verified by visual inspection were 82.4%, 84.6%and 98.3%in group A, B and C, respectively, the qualification rate in group C was significantly higher than those in group B and group C (all CONCLUSIONS Machinery sterilization set 70 ℃ for 30 min has better cleaning and sterilizing effects for reusable medical goggles.
Eye Protective Devices/standards* ; Sterilization/methods* ; Surveys and Questionnaires

Severe cases infected with the coronavirus disease 2019 (COVID-19), named by the World Health Organization (WHO) on Feb. 11, 2020, tend to present a hypercatabolic state because of severe systemic consumption, and are susceptible to stress ulcers and even life-threatening gastrointestinal bleeding. Endoscopic diagnosis and treatment constitute an irreplaceable part in the handling of severe COVID-19 cases. Endoscopes, as reusable precision instruments with complicated structures, require more techniques than other medical devices in cleaning, disinfection, sterilization, and other reprocessing procedures. From 2016 to 2019, health care-acquired infection caused by improper endoscope reprocessing has always been among the top 5 on the list of top 10 health technology hazards issued by the Emergency Care Research Institute. Considering the highly infective nature of COVID-19 and the potential aerosol contamination therefrom, it is of pivotal significance to ensure that endoscopes are strictly reprocessed between uses. In accordance with the national standard "Regulation for Cleaning and Disinfection Technique of Flexible Endoscope (WS507-2016)," we improved the workflow of endoscope reprocessing including the selection of chemicals in an effort to ensure quality control throughout the clinical management towards COVID-19 patients. Based on the experience we attained from the 12 severe COVID-19 cases in our hospital who underwent endoscopy 23 times in total, the article provides an improved version of endoscopic reprocessing guidelines for bedside endoscopic diagnosis and treatment on COVID-19 patients for reference.
Adult ; Aged ; Aged, 80 and over ; Betacoronavirus ; China ; Coronavirus Infections ; diagnosis ; therapy ; Cross Infection ; prevention & control ; Disinfection ; methods ; Endoscopes ; virology ; Equipment Contamination ; prevention & control ; Female ; Humans ; Male ; Middle Aged ; Pandemics ; Peracetic Acid ; Personal Protective Equipment ; Pneumonia, Viral ; diagnosis ; therapy ; Sterilization ; methods ; Workflow

The purpose of this study was to propose a method for the effective management of toothbrush contamination. Toothbrush microbial contamination was analyzed according to the duration of toothbrush use, frequency of toothbrush use per day, and toothbrush storage location. We also analyzed the microbial reduction effect of vinegar, antimicrobial mouth rinse, bamboo salt, and baking soda, which are sterilization materials that can be easily used every day. We collected 45 toothbrushes from university dormitories from May to June 2018. To determine the degree of microbiological contamination with general bacteria, coliform bacteria, and Staphylococcus aureus, bristle samples were cultured at 36oC for 24 hours using 3M™ Petrifilm plates and then measured based on Petrifilm evaluation criteria. Toothbrush microorganisms were analyzed according to the duration of use, frequency of use per day, storage location, and effect of each sterilization material. General bacteria, coliforms, and S. aureus contamination increased with frequency and duration of use (p <0.05). In particular, S. aureus showed a statistically significant increase to 36.15 CFU/ml after 1 month, 504.23 CFU/ml after 2 months, and 2,386.67 CFU/ml after 3 months (p <0.05). We found that 1% vinegar was the most effective substance for reducing general bacteria, coliforms, and S. aureus. In addition, 1% antimicrobial mouth rinse solution applied for 5 minutes was the most effective in reducing S. aureus. It is crucial to recognize the importance of toothbrush care and store toothbrushes in a dry place and replace them periodically. We recommend use of vinegar and antimicrobial mouth rinse solution to disinfect toothbrushes. These should be applied as a 1% solution for at least 1 minute. Proper care of toothbrushes is important in maintaining oral health as well as overall health. Instructions on toothbrush care should be given when teaching children or adults how to brush teeth.
Acetic Acid ; Adult ; Bacteria ; Child ; Humans ; Methods ; Mouth ; Oral Health ; Oral Hygiene ; Sodium Bicarbonate ; Staphylococcus aureus ; Sterilization ; Tooth ; Toothbrushing

BACKGROUND: The purpose of this study was to evaluate the usefulness of sonication technique for microbiological diagnosis and the sterility of the recycled autoclaved femoral components from infected total knee arthroplasty (TKA) using a sonication method. METHODS: Nineteen femoral implants explanted from patients with infected TKA were sterilized with a standard autoclave method. Standard culture of the fluid before and after sonication of the sterilized implants was performed to detect pathogenic microorganisms. Additional experiments were performed to evaluate the sterility of the recycled implant by inducing artificial biofilm formation. Methicillin-resistant Staphylococcus aureus (MRSA) was inoculated into 10 implants and sterilization in a standard autoclave was performed, and then the fluid was cultured before and after sonication. RESULTS: Two of the 19 sterilized implants were positive for growth of bacteria after sonication, whereas no growth was detected in the cultured fluid from the sterilized implants before sonication. The bacteria were Staphylococcus species in all two cases. In one of 10 implants inoculated with MRSA, the culture was positive for growth of bacteria both before and after sonication. However, Staphylococcus epidermidis was cultured from both occasions and thus this implant was thought to be contaminated. CONCLUSIONS: We found sonication for identification of pathogens could be helpful, but this finding should be interpreted carefully because of the possibility of contamination. Sterilization of an infected femoral implant with an autoclave method could be a good method for using the temporary articulating antibiotic spacer in two-stage revision arthroplasty.
Arthroplasty ; Arthroplasty, Replacement, Knee* ; Bacteria ; Biofilms ; Diagnosis ; Humans ; Infertility* ; Methicillin-Resistant Staphylococcus aureus ; Methods* ; Sonication* ; Staphylococcus ; Staphylococcus epidermidis ; Sterilization

In-depth knowledge of disinfection and sterilization is a key component of infection control. Sterilization completely removes a spore, whereas disinfection cannot. Disinfectants are classified as oxidants and non-oxidants. The decision regarding which method to apply is based on Spaulding's classification. In this article, disinfection and sterilization are thoroughly reviewed, and extensive information from basic to practical points is discussed.
Classification ; Disinfectants ; Disinfection* ; Infection Control ; Methods ; Oxidants ; Spores ; Sterilization*

In-depth knowledge of disinfection and sterilization is a key component of infection control. Sterilization completely removes a spore, whereas disinfection cannot. Disinfectants are classified as oxidants and non-oxidants. The decision regarding which method to apply is based on Spaulding's classification. In this article, disinfection and sterilization are thoroughly reviewed, and extensive information from basic to practical points is discussed.
Classification ; Disinfectants ; Disinfection* ; Infection Control ; Methods ; Oxidants ; Spores ; Sterilization*

We studied the disinfection effect of a new ultraviolet (UV) sterilizer and its utilization on ultrasound probe surfaces. Carrier quantitative germicidal tests, simulated on-the-spot trials, and organic substance influence tests were used to carry out experimental observation. Artificially infected probes were disinfected using the sterilizer or a germicidal lamp for comparison. The total number and types of bacteria were determined and identified. Our results demonstrated the sterilizer had the best disinfection effect among three different disinfection methods in hospital. The sterilizer has been used in a hospital setting for 2 years with no notable damage to the ultrasound probe instrument. It has the advantages of fast disinfection, high disinfection effect, and good compatibility with the ultrasound instrument, worthy of being a promoted application in medical institutions.
Bacterial Infections ; microbiology ; prevention & control ; Colony Count, Microbial ; Cross Infection ; microbiology ; prevention & control ; Disinfection ; instrumentation ; methods ; Equipment Contamination ; prevention & control ; Sterilization ; instrumentation ; Surface Properties ; Ultrasonography ; instrumentation ; Ultraviolet Rays

PURPOSE: In this study we investigated the surgical outcome and effectiveness of using a 17-gauge spinal anesthesia needle for guiding insertion of the silicone rod in frontalis sling surgery for patients having severe myogenic or neurogenic ptosis with risk of exposure keratopathy. METHODS: This study included on 8 patients (11 eyes) who previously received frontalis sling surgery with a 17-gauge spinal anesthesia needle because of severe myogenic or neurogenic ptosis with risk of exposure keratopathy. We investigated the technique, surgical outcome, and clinical features following frontalis sling surgery, and evaluated the advantages of using a 17-gauge spinal anesthesia needle. RESULTS: The mean age of patients was 54 years. Third nerve palsy was the most common etiology in severe ptosis with risk of exposure keratopathy (5 of 8, 62.5%). Main advantages of the 17-gauge spinal anesthesia needle are smaller skin incision that allows for minimal damage during tissue passage and easy guide for insertion. Other advantages included sterilization, minimizing infections, sharpness without distortion because it is disposable, and economic value. The mean follow-up period was 21.4 months, and the upper lid margin of all patients was adequately high above the pupil margin. Additionally, no major complications were observed in the patients. CONCLUSIONS: Frontalis sling surgery with a silicone rod is a safe and effective method for patients with severe myogenic or neurogenic ptosis with risk of exposure keratopathy. The 17-gauge spinal anesthesia needle is useful and economical in frontalis sling surgery for guiding insertion of the silicon rod as an alternative option to the Wright needle.
Anesthesia, Spinal* ; Follow-Up Studies ; Humans ; Methods ; Needles* ; Oculomotor Nerve Diseases ; Pupil ; Silicon* ; Silicones* ; Skin ; Sterilization

BACKGROUND AND OBJECTIVES: A fall refers to a sudden fall accident resulting in injury and hurt of the human body. In the hospital, fall accidents occur mainly in dizzy patients or elderly people, but can also occur even in young people who fail to adapt to the unfamiliar hospital environment. This study analyzed the incidence of fall accidents and its pattern in dizzy patients in a tertiary hospital in South Korea. SUBJECTS AND METHOD: This study was conducted using 477 fall accidents that occurred in a tertiary hospital in Korea from 2011 to 2015. Extensively investigated were related fall risk factors such as patient's sex, age, medical department, diagnosis, first witness, mental status, physical activity, patient risk factors, walking aids, medication use and treatment. RESULTS: Dizziness induced falls consisted of 20.5% of the total fall accidents. Sedative medications were frequently used in patients of dizziness induced falls (42.9%). Fall acidents were mainly detected by nurses 33%. The frequente sites of fall were the bed rooms (55%), the corridor (15%) or the bath rooms (8%). Types of physical damage were no damage (47%), abrasion or bruising (20%), laceration (10%), bath rooms (8%), fracture (3%), and head trauma (1%). In 532 treatments, observation was recommended for 68%, sterilization 15.2%, suture 4.7%, cast 1%, and surgery 1%. CONCLUSION: The study finds that the fall risk screening test and Multifactorial Fall Prevention Program should be performed for all high-risk patients of fall. About 20% of falls were associated with otologic dizziness, and otolaryngology doctors should pay attention to the fall problem and the medication related to dizziness, which may potentially increase the risk of falls.
Accident Prevention ; Accidental Falls ; Aged ; Baths ; Craniocerebral Trauma ; Diagnosis ; Dizziness ; Education ; Human Body ; Humans ; Incidence ; Korea* ; Lacerations ; Mass Screening ; Methods ; Motor Activity ; Otolaryngology ; Risk Factors ; Sterilization ; Sutures ; Tertiary Care Centers* ; Walking